Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 87.8 >
edited by Xiaoling
on 2022/07/13 10:01
To version < 153.1 >
edited by Bei Jinggeng
on 2022/09/09 15:15
>
Change comment: Uploaded new attachment "image-20220909151517-2.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Bei
Content
... ... @@ -1,47 +1,66 @@
1 1  
2 2  
3 +**Table of Contents:**
4 +
3 3  {{toc/}}
4 4  
5 5  
6 6  
7 -= 1.  LA66 LoRaWAN Module =
8 8  
9 9  
10 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
11 11  
12 12  
13 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
14 +== 1.1  Overview ==
14 14  
15 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 16  
17 +[[image:image-20220715001142-3.png||height="145" width="220"]]
18 +
19 +
20 +(((
21 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 +)))
27 +
28 +(((
17 17  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 +)))
18 18  
32 +(((
19 19  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 +)))
20 20  
36 +(((
21 21  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 +)))
22 22  
23 23  
41 +
24 24  == 1.2  Features ==
25 25  
44 +
45 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 +* Ultra-long RF range
26 26  * Support LoRaWAN v1.0.4 protocol
27 27  * Support peer-to-peer protocol
28 28  * TCXO crystal to ensure RF performance on low temperature
29 -* SMD Antenna pad and i-pex antenna connector
50 +* Spring RF antenna
30 30  * Available in different frequency LoRaWAN frequency bands.
31 31  * World-wide unique OTAA keys.
32 32  * AT Command via UART-TTL interface
33 33  * Firmware upgradable via UART interface
34 -* Ultra-long RF range
55 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
35 35  
36 -
37 -
38 38  == 1.3  Specification ==
39 39  
59 +
40 40  * CPU: 32-bit 48 MHz
41 41  * Flash: 256KB
42 42  * RAM: 64KB
43 -* Input Power Range: 1.8v ~~ 3.7v
44 -* Power Consumption: < 4uA.
63 +* Input Power Range: 5v
45 45  * Frequency Range: 150 MHz ~~ 960 MHz
46 46  * Maximum Power +22 dBm constant RF output
47 47  * High sensitivity: -148 dBm
... ... @@ -53,376 +53,296 @@
53 53  ** Operating: 10 ~~ 95% (Non-Condensing)
54 54  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
55 55  * LoRa Rx current: <9 mA
56 -* I/O Voltage: 3.3v
57 57  
76 +== 1.4  Pin Mapping & LED ==
58 58  
59 59  
60 -== 1.4  AT Command ==
79 +[[image:image-20220813183239-3.png||height="526" width="662"]]
61 61  
62 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
63 63  
64 64  
65 -== 1.5  Dimension ==
83 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
66 66  
67 -[[image:image-20220517072526-1.png]]
68 68  
86 +(((
87 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
88 +)))
69 69  
70 70  
71 -== 1.6  Pin Mapping ==
91 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
72 72  
73 73  
74 -[[image:image-20220523101537-1.png]]
94 +[[image:image-20220723100027-1.png]]
75 75  
76 76  
97 +Open the serial port tool
77 77  
78 -== 1.7  Land Pattern ==
99 +[[image:image-20220602161617-8.png]]
79 79  
80 -[[image:image-20220517072821-2.png]]
101 +[[image:image-20220602161718-9.png||height="457" width="800"]]
81 81  
82 82  
83 83  
84 -= 2.  LA66 LoRaWAN Shield =
105 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
85 85  
86 86  
87 -== 2.1  Overview ==
108 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
88 88  
89 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
90 90  
111 +[[image:image-20220602161935-10.png||height="498" width="800"]]
91 91  
92 -== 2.2  Features ==
93 93  
94 -* Arduino Shield base on LA66 LoRaWAN module
95 -* Support LoRaWAN v1.0.4 protocol
96 -* Support peer-to-peer protocol
97 -* TCXO crystal to ensure RF performance on low temperature
98 -* SMA connector
99 -* Available in different frequency LoRaWAN frequency bands.
100 -* World-wide unique OTAA keys.
101 -* AT Command via UART-TTL interface
102 -* Firmware upgradable via UART interface
103 -* Ultra-long RF range
104 104  
115 +(% style="color:blue" %)**3. See Uplink Command**
105 105  
106 106  
107 -== 2.3  Specification ==
118 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
108 108  
109 -* CPU: 32-bit 48 MHz
110 -* Flash: 256KB
111 -* RAM: 64KB
112 -* Input Power Range: 1.8v ~~ 3.7v
113 -* Power Consumption: < 4uA.
114 -* Frequency Range: 150 MHz ~~ 960 MHz
115 -* Maximum Power +22 dBm constant RF output
116 -* High sensitivity: -148 dBm
117 -* Temperature:
118 -** Storage: -55 ~~ +125℃
119 -** Operating: -40 ~~ +85℃
120 -* Humidity:
121 -** Storage: 5 ~~ 95% (Non-Condensing)
122 -** Operating: 10 ~~ 95% (Non-Condensing)
123 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 -* LoRa Rx current: <9 mA
125 -* I/O Voltage: 3.3v
120 +example: AT+SENDB=01,02,8,05820802581ea0a5
126 126  
122 +[[image:image-20220602162157-11.png||height="497" width="800"]]
127 127  
128 128  
129 -== 2.4  Pin Mapping & LED ==
130 130  
126 +(% style="color:blue" %)**4. Check to see if TTN received the message**
131 131  
132 132  
133 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
129 +[[image:image-20220817093644-1.png]]
134 134  
135 135  
136 136  
137 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
133 +== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
138 138  
139 139  
136 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
140 140  
141 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
138 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
142 142  
143 143  
141 +(% style="color:red" %)**Preconditions:**
144 144  
145 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
143 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
146 146  
145 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
147 147  
148 -=== 2.8.1  Items needed for update ===
149 149  
150 -1. LA66 LoRaWAN Shield
151 -1. Arduino
152 -1. USB TO TTL Adapter
153 153  
154 -[[image:image-20220602100052-2.png||height="385" width="600"]]
149 +(% style="color:blue" %)**Steps for usage:**
155 155  
151 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
156 156  
157 -=== 2.8.2  Connection ===
153 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
158 158  
159 159  
160 -[[image:image-20220602101311-3.png||height="276" width="600"]]
156 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
161 161  
162 162  
163 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
164 164  
165 -(% style="background-color:yellow" %)**GND  <-> GND
166 -TXD  <->  TXD
167 -RXD  <->  RXD**
160 +== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
168 168  
169 169  
170 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
163 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
171 171  
172 -Connect USB TTL Adapter to PC after connecting the wires
173 173  
166 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
174 174  
175 -[[image:image-20220602102240-4.png||height="304" width="600"]]
176 176  
169 +[[image:image-20220723100439-2.png]]
177 177  
178 -=== 2.8.3  Upgrade steps ===
179 179  
180 180  
181 -==== 1.  Switch SW1 to put in ISP position ====
173 +(% style="color:blue" %)**2. Install Minicom in RPi.**
182 182  
183 183  
184 -[[image:image-20220602102824-5.png||height="306" width="600"]]
176 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
185 185  
178 + (% style="background-color:yellow" %)**apt update**
186 186  
187 -==== 2.  Press the RST switch once ====
180 + (% style="background-color:yellow" %)**apt install minicom**
188 188  
189 -[[image:image-20220602104701-12.png||height="285" width="600"]]
190 190  
183 +Use minicom to connect to the RPI's terminal
191 191  
192 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
185 +[[image:image-20220602153146-3.png||height="439" width="500"]]
193 193  
194 194  
195 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
196 196  
189 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
197 197  
198 -[[image:image-20220602103227-6.png]]
199 199  
192 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
200 200  
201 -[[image:image-20220602103357-7.png]]
202 202  
195 +[[image:image-20220602154928-5.png||height="436" width="500"]]
203 203  
204 204  
205 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
206 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
207 207  
199 +(% style="color:blue" %)**4. Send Uplink message**
208 208  
209 -[[image:image-20220602103844-8.png]]
210 210  
202 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
211 211  
204 +example: AT+SENDB=01,02,8,05820802581ea0a5
212 212  
213 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
214 -(% style="color:blue" %)**3. Select the bin file to burn**
215 215  
207 +[[image:image-20220602160339-6.png||height="517" width="600"]]
216 216  
217 -[[image:image-20220602104144-9.png]]
218 218  
219 219  
220 -[[image:image-20220602104251-10.png]]
211 +Check to see if TTN received the message
221 221  
213 +[[image:image-20220602160627-7.png||height="369" width="800"]]
222 222  
223 -[[image:image-20220602104402-11.png]]
224 224  
225 225  
217 +== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
226 226  
227 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
228 -(% style="color:blue" %)**4. Click to start the download**
229 229  
230 -[[image:image-20220602104923-13.png]]
220 +=== 1.8.1  Hardware and Software Connection ===
231 231  
232 232  
233 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
234 -(% style="color:blue" %)**5. Check update process**
235 235  
224 +==== (% style="color:blue" %)**Overview：**(%%) ====
236 236  
237 -[[image:image-20220602104948-14.png]]
238 238  
227 +(((
228 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
239 239  
230 +* Send real-time location information of mobile phone to LoRaWAN network.
231 +* Check LoRaWAN network signal strengh.
232 +* Manually send messages to LoRaWAN network.
233 +)))
240 240  
241 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
242 -(% style="color:blue" %)**The following picture shows that the burning is successful**
243 243  
244 -[[image:image-20220602105251-15.png]]
245 245  
246 246  
238 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
247 247  
248 -= 3.  LA66 USB LoRaWAN Adapter =
249 249  
241 +A USB to Type-C adapter is needed to connect to a Mobile phone.
250 250  
251 -== 3.1  Overview ==
243 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
252 252  
253 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
245 +[[image:image-20220813174353-2.png||height="360" width="313"]]
254 254  
255 255  
256 -== 3.2  Features ==
257 257  
258 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
259 -* Ultra-long RF range
260 -* Support LoRaWAN v1.0.4 protocol
261 -* Support peer-to-peer protocol
262 -* TCXO crystal to ensure RF performance on low temperature
263 -* Spring RF antenna
264 -* Available in different frequency LoRaWAN frequency bands.
265 -* World-wide unique OTAA keys.
266 -* AT Command via UART-TTL interface
267 -* Firmware upgradable via UART interface
249 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
268 268  
269 -== 3.3  Specification ==
270 270  
271 -* CPU: 32-bit 48 MHz
272 -* Flash: 256KB
273 -* RAM: 64KB
274 -* Input Power Range: 5v
275 -* Frequency Range: 150 MHz ~~ 960 MHz
276 -* Maximum Power +22 dBm constant RF output
277 -* High sensitivity: -148 dBm
278 -* Temperature:
279 -** Storage: -55 ~~ +125℃
280 -** Operating: -40 ~~ +85℃
281 -* Humidity:
282 -** Storage: 5 ~~ 95% (Non-Condensing)
283 -** Operating: 10 ~~ 95% (Non-Condensing)
284 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
285 -* LoRa Rx current: <9 mA
252 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
286 286  
287 -== 3.4  Pin Mapping & LED ==
254 +[[image:image-20220813173738-1.png]]
288 288  
289 289  
290 290  
291 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
258 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
292 292  
293 293  
294 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
261 +Function and page introduction
295 295  
296 296  
297 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
264 +[[image:image-20220723113448-7.png||height="995" width="450"]]
298 298  
266 +**Block Explain:**
299 299  
300 -[[image:image-20220602171217-1.png||height="538" width="800"]]
268 +1.  Display LA66 USB LoRaWAN Module connection status
301 301  
270 +2.  Check and reconnect
302 302  
303 -Open the serial port tool
272 +3.  Turn send timestamps on or off
304 304  
305 -[[image:image-20220602161617-8.png]]
274 +4.  Display LoRaWan connection status
306 306  
307 -[[image:image-20220602161718-9.png||height="457" width="800"]]
276 +5.  Check LoRaWan connection status
308 308  
278 +6.  The RSSI value of the node when the ACK is received
309 309  
280 +7.  Node's Signal Strength Icon
310 310  
311 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
282 +8.  Configure Location Uplink Interval
312 312  
313 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
284 +9.  AT command input box
314 314  
286 +10.  Send Button:  Send input box info to LA66 USB Adapter
315 315  
316 -[[image:image-20220602161935-10.png||height="498" width="800"]]
288 +11.  Output Log from LA66 USB adapter
317 317  
290 +12.  clear log button
318 318  
292 +13.  exit button
319 319  
320 -(% style="color:blue" %)**3. See Uplink Command**
321 321  
322 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
323 323  
324 -example: AT+SENDB=01,02,8,05820802581ea0a5
296 +LA66 USB LoRaWAN Module not connected
325 325  
326 -[[image:image-20220602162157-11.png||height="497" width="800"]]
327 327  
299 +[[image:image-20220723110520-5.png||height="677" width="508"]]
328 328  
329 329  
330 -(% style="color:blue" %)**4. Check to see if TTN received the message**
331 331  
332 -[[image:image-20220602162331-12.png||height="420" width="800"]]
303 +Connect LA66 USB LoRaWAN Module
333 333  
305 +[[image:image-20220723110626-6.png||height="681" width="511"]]
334 334  
335 335  
336 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
337 337  
309 +=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
338 338  
339 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
340 340  
312 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
341 341  
342 -(% style="color:red" %)**Preconditions:**
343 343  
344 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
315 +[[image:image-20220723134549-8.png]]
345 345  
346 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
347 347  
348 348  
319 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
349 349  
350 -(% style="color:blue" %)**Steps for usage:**
351 351  
352 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
322 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
353 353  
354 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
324 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
355 355  
356 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
326 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
357 357  
328 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
358 358  
359 359  
360 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
331 +Example output in NodeRed is as below:
361 361  
333 +[[image:image-20220723144339-1.png]]
362 362  
363 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
364 364  
365 365  
366 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
337 +== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
367 367  
368 -[[image:image-20220602171233-2.png||height="538" width="800"]]
369 369  
340 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
370 370  
342 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
371 371  
372 -(% style="color:blue" %)**2. Install Minicom in RPi.**
373 373  
374 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
345 +[[image:image-20220723150132-2.png]]
375 375  
376 - (% style="background-color:yellow" %)**apt update**
377 377  
378 - (% style="background-color:yellow" %)**apt install minicom**
379 379  
349 += 2.  FAQ =
380 380  
381 -Use minicom to connect to the RPI's terminal
382 382  
383 -[[image:image-20220602153146-3.png||height="439" width="500"]]
352 +== 2.1  How to Compile Source Code for LA66? ==
384 384  
385 385  
355 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
386 386  
387 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
388 -(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
389 389  
390 -[[image:image-20220602154928-5.png||height="436" width="500"]]
391 391  
359 += 3.  Order Info =
392 392  
393 393  
394 -(% style="color:blue" %)**4. Send Uplink message**
362 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
395 395  
396 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
397 397  
398 -example: AT+SENDB=01,02,8,05820802581ea0a5
399 -
400 -
401 -[[image:image-20220602160339-6.png||height="517" width="600"]]
402 -
403 -
404 -
405 -Check to see if TTN received the message
406 -
407 -[[image:image-20220602160627-7.png||height="369" width="800"]]
408 -
409 -
410 -
411 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
412 -
413 -
414 -
415 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
416 -
417 -
418 -
419 -
420 -= 4.  Order Info =
421 -
422 -
423 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
424 -
425 -
426 426  (% style="color:blue" %)**XXX**(%%): The default frequency band
427 427  
428 428  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -436,10 +436,10 @@
436 436  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
437 437  
438 438  
378 += 4.  Reference =
439 439  
440 440  
441 -= 5.  Reference =
381 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
382 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
442 442  
443 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
444 -
445 445  
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0