Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 87.6 >
edited by Xiaoling
on 2022/07/13 09:59
To version < 149.7 >
edited by Xiaoling
on 2022/08/22 16:24
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Content
... ... @@ -1,49 +1,68 @@
1 1  
2 2  
3 -{{box cssClass="floatinginfobox" title="**Contents**"}}
4 -{{toc/}}
5 -{{/box}}
3 +**Table of Contents:**
6 6  
7 7  {{toc/}}
8 8  
9 9  
10 10  
11 -= 1.  LA66 LoRaWAN Module =
12 12  
13 13  
14 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
15 15  
16 16  
17 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
14 +== 1.1  Overview ==
18 18  
19 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
20 20  
17 +[[image:image-20220715001142-3.png||height="145" width="220"]]
18 +
19 +
20 +(((
21 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 +)))
27 +
28 +(((
21 21  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 +)))
22 22  
32 +(((
23 23  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 +)))
24 24  
36 +(((
25 25  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 +)))
26 26  
27 27  
41 +
28 28  == 1.2  Features ==
29 29  
44 +
45 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 +* Ultra-long RF range
30 30  * Support LoRaWAN v1.0.4 protocol
31 31  * Support peer-to-peer protocol
32 32  * TCXO crystal to ensure RF performance on low temperature
33 -* SMD Antenna pad and i-pex antenna connector
50 +* Spring RF antenna
34 34  * Available in different frequency LoRaWAN frequency bands.
35 35  * World-wide unique OTAA keys.
36 36  * AT Command via UART-TTL interface
37 37  * Firmware upgradable via UART interface
38 -* Ultra-long RF range
55 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
39 39  
57 +
58 +
40 40  == 1.3  Specification ==
41 41  
61 +
42 42  * CPU: 32-bit 48 MHz
43 43  * Flash: 256KB
44 44  * RAM: 64KB
45 -* Input Power Range: 1.8v ~~ 3.7v
46 -* Power Consumption: < 4uA.
65 +* Input Power Range: 5v
47 47  * Frequency Range: 150 MHz ~~ 960 MHz
48 48  * Maximum Power +22 dBm constant RF output
49 49  * High sensitivity: -148 dBm
... ... @@ -55,371 +55,296 @@
55 55  ** Operating: 10 ~~ 95% (Non-Condensing)
56 56  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
57 57  * LoRa Rx current: <9 mA
58 -* I/O Voltage: 3.3v
59 59  
60 -== 1.4  AT Command ==
61 61  
62 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
63 63  
80 +== 1.4  Pin Mapping & LED ==
64 64  
65 -== 1.5  Dimension ==
66 66  
67 -[[image:image-20220517072526-1.png]]
83 +[[image:image-20220813183239-3.png||height="526" width="662"]]
68 68  
69 69  
70 70  
71 -== 1.6  Pin Mapping ==
87 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
72 72  
73 73  
74 -[[image:image-20220523101537-1.png]]
90 +(((
91 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
92 +)))
75 75  
76 76  
95 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
77 77  
78 -== 1.7  Land Pattern ==
79 79  
80 -[[image:image-20220517072821-2.png]]
98 +[[image:image-20220723100027-1.png]]
81 81  
82 82  
101 +Open the serial port tool
83 83  
84 -= 2.  LA66 LoRaWAN Shield =
103 +[[image:image-20220602161617-8.png]]
85 85  
105 +[[image:image-20220602161718-9.png||height="457" width="800"]]
86 86  
87 -== 2.1  Overview ==
88 88  
89 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
90 90  
109 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
91 91  
92 -== 2.2  Features ==
93 93  
94 -* Arduino Shield base on LA66 LoRaWAN module
95 -* Support LoRaWAN v1.0.4 protocol
96 -* Support peer-to-peer protocol
97 -* TCXO crystal to ensure RF performance on low temperature
98 -* SMA connector
99 -* Available in different frequency LoRaWAN frequency bands.
100 -* World-wide unique OTAA keys.
101 -* AT Command via UART-TTL interface
102 -* Firmware upgradable via UART interface
103 -* Ultra-long RF range
112 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
104 104  
105 -== 2.3  Specification ==
106 106  
107 -* CPU: 32-bit 48 MHz
108 -* Flash: 256KB
109 -* RAM: 64KB
110 -* Input Power Range: 1.8v ~~ 3.7v
111 -* Power Consumption: < 4uA.
112 -* Frequency Range: 150 MHz ~~ 960 MHz
113 -* Maximum Power +22 dBm constant RF output
114 -* High sensitivity: -148 dBm
115 -* Temperature:
116 -** Storage: -55 ~~ +125℃
117 -** Operating: -40 ~~ +85℃
118 -* Humidity:
119 -** Storage: 5 ~~ 95% (Non-Condensing)
120 -** Operating: 10 ~~ 95% (Non-Condensing)
121 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
122 -* LoRa Rx current: <9 mA
123 -* I/O Voltage: 3.3v
115 +[[image:image-20220602161935-10.png||height="498" width="800"]]
124 124  
125 -== 2.4  Pin Mapping & LED ==
126 126  
127 127  
119 +(% style="color:blue" %)**3. See Uplink Command**
128 128  
129 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
130 130  
122 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
131 131  
124 +example: AT+SENDB=01,02,8,05820802581ea0a5
132 132  
133 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
126 +[[image:image-20220602162157-11.png||height="497" width="800"]]
134 134  
135 135  
136 136  
137 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
130 +(% style="color:blue" %)**4. Check to see if TTN received the message**
138 138  
139 139  
133 +[[image:image-20220817093644-1.png]]
140 140  
141 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
142 142  
143 143  
144 -=== 2.8.1  Items needed for update ===
137 +== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
145 145  
146 -1. LA66 LoRaWAN Shield
147 -1. Arduino
148 -1. USB TO TTL Adapter
149 149  
150 -[[image:image-20220602100052-2.png||height="385" width="600"]]
140 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
151 151  
142 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
152 152  
153 -=== 2.8.2  Connection ===
154 154  
145 +(% style="color:red" %)**Preconditions:**
155 155  
156 -[[image:image-20220602101311-3.png||height="276" width="600"]]
147 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
157 157  
149 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
158 158  
159 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
160 160  
161 161  
162 -(% style="background-color:yellow" %)**GND  <-> GND
163 -TXD  <->  TXD
164 -RXD  <->  RXD**
153 +(% style="color:blue" %)**Steps for usage:**
165 165  
155 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
166 166  
167 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
157 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
168 168  
169 -Connect USB TTL Adapter to PC after connecting the wires
170 170  
160 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
171 171  
172 -[[image:image-20220602102240-4.png||height="304" width="600"]]
173 173  
174 174  
175 -=== 2.8.3  Upgrade steps ===
164 +== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
176 176  
177 177  
178 -==== 1.  Switch SW1 to put in ISP position ====
167 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
179 179  
180 180  
181 -[[image:image-20220602102824-5.png||height="306" width="600"]]
170 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
182 182  
183 183  
184 -==== 2.  Press the RST switch once ====
173 +[[image:image-20220723100439-2.png]]
185 185  
186 -[[image:image-20220602104701-12.png||height="285" width="600"]]
187 187  
188 188  
189 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
177 +(% style="color:blue" %)**2. Install Minicom in RPi.**
190 190  
191 191  
192 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
180 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
193 193  
182 + (% style="background-color:yellow" %)**apt update**
194 194  
195 -[[image:image-20220602103227-6.png]]
184 + (% style="background-color:yellow" %)**apt install minicom**
196 196  
197 197  
198 -[[image:image-20220602103357-7.png]]
187 +Use minicom to connect to the RPI's terminal
199 199  
189 +[[image:image-20220602153146-3.png||height="439" width="500"]]
200 200  
201 201  
202 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
203 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
204 204  
193 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
205 205  
206 -[[image:image-20220602103844-8.png]]
207 207  
196 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
208 208  
209 209  
210 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
211 -(% style="color:blue" %)**3. Select the bin file to burn**
199 +[[image:image-20220602154928-5.png||height="436" width="500"]]
212 212  
213 213  
214 -[[image:image-20220602104144-9.png]]
215 215  
203 +(% style="color:blue" %)**4. Send Uplink message**
216 216  
217 -[[image:image-20220602104251-10.png]]
218 218  
206 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
219 219  
220 -[[image:image-20220602104402-11.png]]
208 +example: AT+SENDB=01,02,8,05820802581ea0a5
221 221  
222 222  
211 +[[image:image-20220602160339-6.png||height="517" width="600"]]
223 223  
224 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
225 -(% style="color:blue" %)**4. Click to start the download**
226 226  
227 -[[image:image-20220602104923-13.png]]
228 228  
215 +Check to see if TTN received the message
229 229  
230 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
231 -(% style="color:blue" %)**5. Check update process**
217 +[[image:image-20220602160627-7.png||height="369" width="800"]]
232 232  
233 233  
234 -[[image:image-20220602104948-14.png]]
235 235  
221 +== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
236 236  
237 237  
238 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
239 -(% style="color:blue" %)**The following picture shows that the burning is successful**
224 +=== 1.8.1  Hardware and Software Connection ===
240 240  
241 -[[image:image-20220602105251-15.png]]
242 242  
243 243  
228 +==== (% style="color:blue" %)**Overview：**(%%) ====
244 244  
245 -= 3.  LA66 USB LoRaWAN Adapter =
246 246  
231 +(((
232 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
247 247  
248 -== 3.1  Overview ==
234 +* Send real-time location information of mobile phone to LoRaWAN network.
235 +* Check LoRaWAN network signal strengh.
236 +* Manually send messages to LoRaWAN network.
237 +)))
249 249  
250 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
251 251  
252 252  
253 -== 3.2  Features ==
254 254  
255 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
256 -* Ultra-long RF range
257 -* Support LoRaWAN v1.0.4 protocol
258 -* Support peer-to-peer protocol
259 -* TCXO crystal to ensure RF performance on low temperature
260 -* Spring RF antenna
261 -* Available in different frequency LoRaWAN frequency bands.
262 -* World-wide unique OTAA keys.
263 -* AT Command via UART-TTL interface
264 -* Firmware upgradable via UART interface
242 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
265 265  
266 -== 3.3  Specification ==
267 267  
268 -* CPU: 32-bit 48 MHz
269 -* Flash: 256KB
270 -* RAM: 64KB
271 -* Input Power Range: 5v
272 -* Frequency Range: 150 MHz ~~ 960 MHz
273 -* Maximum Power +22 dBm constant RF output
274 -* High sensitivity: -148 dBm
275 -* Temperature:
276 -** Storage: -55 ~~ +125℃
277 -** Operating: -40 ~~ +85℃
278 -* Humidity:
279 -** Storage: 5 ~~ 95% (Non-Condensing)
280 -** Operating: 10 ~~ 95% (Non-Condensing)
281 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
282 -* LoRa Rx current: <9 mA
245 +A USB to Type-C adapter is needed to connect to a Mobile phone.
283 283  
284 -== 3.4  Pin Mapping & LED ==
247 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
285 285  
249 +[[image:image-20220813174353-2.png||height="360" width="313"]]
286 286  
287 287  
288 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
289 289  
253 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
290 290  
291 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
292 292  
256 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
293 293  
294 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
258 +[[image:image-20220813173738-1.png]]
295 295  
296 296  
297 -[[image:image-20220602171217-1.png||height="538" width="800"]]
298 298  
262 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
299 299  
300 -Open the serial port tool
301 301  
302 -[[image:image-20220602161617-8.png]]
265 +Function and page introduction
303 303  
304 -[[image:image-20220602161718-9.png||height="457" width="800"]]
305 305  
268 +[[image:image-20220723113448-7.png||height="995" width="450"]]
306 306  
270 +**Block Explain:**
307 307  
308 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
272 +1.  Display LA66 USB LoRaWAN Module connection status
309 309  
310 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
274 +2.  Check and reconnect
311 311  
276 +3.  Turn send timestamps on or off
312 312  
313 -[[image:image-20220602161935-10.png||height="498" width="800"]]
278 +4.  Display LoRaWan connection status
314 314  
280 +5.  Check LoRaWan connection status
315 315  
282 +6.  The RSSI value of the node when the ACK is received
316 316  
317 -(% style="color:blue" %)**3. See Uplink Command**
284 +7.  Node's Signal Strength Icon
318 318  
319 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
286 +8.  Configure Location Uplink Interval
320 320  
321 -example: AT+SENDB=01,02,8,05820802581ea0a5
288 +9.  AT command input box
322 322  
323 -[[image:image-20220602162157-11.png||height="497" width="800"]]
290 +10.  Send Button:  Send input box info to LA66 USB Adapter
324 324  
292 +11.  Output Log from LA66 USB adapter
325 325  
294 +12.  clear log button
326 326  
327 -(% style="color:blue" %)**4. Check to see if TTN received the message**
296 +13.  exit button
328 328  
329 -[[image:image-20220602162331-12.png||height="420" width="800"]]
330 330  
331 331  
300 +LA66 USB LoRaWAN Module not connected
332 332  
333 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
334 334  
303 +[[image:image-20220723110520-5.png||height="677" width="508"]]
335 335  
336 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
337 337  
338 338  
339 -(% style="color:red" %)**Preconditions:**
307 +Connect LA66 USB LoRaWAN Module
340 340  
341 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
309 +[[image:image-20220723110626-6.png||height="681" width="511"]]
342 342  
343 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
344 344  
345 345  
313 +=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
346 346  
347 -(% style="color:blue" %)**Steps for usage:**
348 348  
349 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
316 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
350 350  
351 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
352 352  
353 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
319 +[[image:image-20220723134549-8.png]]
354 354  
355 355  
356 356  
357 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
323 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
358 358  
359 359  
360 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
326 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
361 361  
328 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
362 362  
363 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
330 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
364 364  
365 -[[image:image-20220602171233-2.png||height="538" width="800"]]
366 366  
333 +Example output in NodeRed is as below:
367 367  
335 +[[image:image-20220723144339-1.png]]
368 368  
369 -(% style="color:blue" %)**2. Install Minicom in RPi.**
370 370  
371 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
372 372  
373 - (% style="background-color:yellow" %)**apt update**
339 +== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
374 374  
375 - (% style="background-color:yellow" %)**apt install minicom**
376 376  
342 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
377 377  
378 -Use minicom to connect to the RPI's terminal
344 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
379 379  
380 -[[image:image-20220602153146-3.png||height="439" width="500"]]
381 381  
347 +[[image:image-20220723150132-2.png]]
382 382  
383 383  
384 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
385 -(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
386 386  
387 -[[image:image-20220602154928-5.png||height="436" width="500"]]
351 += 2.  FAQ =
388 388  
389 389  
354 +== 2.1  How to Compile Source Code for LA66? ==
390 390  
391 -(% style="color:blue" %)**4. Send Uplink message**
392 392  
393 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
357 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
394 394  
395 -example: AT+SENDB=01,02,8,05820802581ea0a5
396 396  
397 397  
398 -[[image:image-20220602160339-6.png||height="517" width="600"]]
361 += 3.  Order Info =
399 399  
400 400  
364 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
401 401  
402 -Check to see if TTN received the message
403 403  
404 -[[image:image-20220602160627-7.png||height="369" width="800"]]
405 -
406 -
407 -
408 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
409 -
410 -
411 -
412 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
413 -
414 -
415 -
416 -
417 -= 4.  Order Info =
418 -
419 -
420 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
421 -
422 -
423 423  (% style="color:blue" %)**XXX**(%%): The default frequency band
424 424  
425 425  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -435,8 +435,10 @@
435 435  
436 436  
437 437  
438 -= 5.  Reference =
382 += 4.  Reference =
439 439  
440 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
441 441  
385 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
386 +
387 +
442 442  
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0