Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 87.3
edited by Xiaoling
on 2022/07/13 09:49
Change comment: There is no comment for this version
To version 149.4
edited by Xiaoling
on 2022/08/17 09:51
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Content
... ... @@ -1,49 +1,68 @@
1 1  
2 2  
3 -{{box cssClass="floatinginfobox" title="**Contents**"}}
4 -{{toc/}}
5 -{{/box}}
3 +**Table of Contents:**
6 6  
7 7  {{toc/}}
8 8  
9 9  
10 10  
11 -= 1.  LA66 LoRaWAN Module =
12 12  
13 13  
14 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
15 15  
16 16  
17 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
14 +== 1.1  Overview ==
18 18  
19 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
20 20  
17 +[[image:image-20220715001142-3.png||height="145" width="220"]]
18 +
19 +
20 +(((
21 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 +)))
27 +
28 +(((
21 21  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 +)))
22 22  
32 +(((
23 23  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 +)))
24 24  
36 +(((
25 25  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 +)))
26 26  
27 27  
41 +
28 28  == 1.2  Features ==
29 29  
44 +
45 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 +* Ultra-long RF range
30 30  * Support LoRaWAN v1.0.4 protocol
31 31  * Support peer-to-peer protocol
32 32  * TCXO crystal to ensure RF performance on low temperature
33 -* SMD Antenna pad and i-pex antenna connector
50 +* Spring RF antenna
34 34  * Available in different frequency LoRaWAN frequency bands.
35 35  * World-wide unique OTAA keys.
36 36  * AT Command via UART-TTL interface
37 37  * Firmware upgradable via UART interface
38 -* Ultra-long RF range
55 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
39 39  
57 +
58 +
40 40  == 1.3  Specification ==
41 41  
61 +
42 42  * CPU: 32-bit 48 MHz
43 43  * Flash: 256KB
44 44  * RAM: 64KB
45 -* Input Power Range: 1.8v ~~ 3.7v
46 -* Power Consumption: < 4uA.
65 +* Input Power Range: 5v
47 47  * Frequency Range: 150 MHz ~~ 960 MHz
48 48  * Maximum Power +22 dBm constant RF output
49 49  * High sensitivity: -148 dBm
... ... @@ -55,375 +55,297 @@
55 55  ** Operating: 10 ~~ 95% (Non-Condensing)
56 56  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
57 57  * LoRa Rx current: <9 mA
58 -* I/O Voltage: 3.3v
59 59  
60 -== 1.4  AT Command ==
61 61  
62 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
63 63  
80 +== 1.4  Pin Mapping & LED ==
64 64  
65 -== 1.5  Dimension ==
82 +[[image:image-20220813183239-3.png||height="526" width="662"]]
66 66  
67 -[[image:image-20220517072526-1.png]]
68 68  
69 69  
86 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
70 70  
71 -== 1.6  Pin Mapping ==
72 72  
89 +(((
90 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
91 +)))
73 73  
74 -[[image:image-20220523101537-1.png]]
75 75  
94 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
76 76  
77 77  
78 -== 1.7  Land Pattern ==
97 +[[image:image-20220723100027-1.png]]
79 79  
80 -[[image:image-20220517072821-2.png]]
81 81  
100 +Open the serial port tool
82 82  
102 +[[image:image-20220602161617-8.png]]
83 83  
84 -= 2.  LA66 LoRaWAN Shield =
104 +[[image:image-20220602161718-9.png||height="457" width="800"]]
85 85  
86 86  
87 -== 2.1  Overview ==
88 88  
89 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
108 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
90 90  
110 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
91 91  
92 -== 2.2  Features ==
93 93  
94 -* Arduino Shield base on LA66 LoRaWAN module
95 -* Support LoRaWAN v1.0.4 protocol
96 -* Support peer-to-peer protocol
97 -* TCXO crystal to ensure RF performance on low temperature
98 -* SMA connector
99 -* Available in different frequency LoRaWAN frequency bands.
100 -* World-wide unique OTAA keys.
101 -* AT Command via UART-TTL interface
102 -* Firmware upgradable via UART interface
103 -* Ultra-long RF range
113 +[[image:image-20220602161935-10.png||height="498" width="800"]]
104 104  
105 -== 2.3  Specification ==
106 106  
107 -* CPU: 32-bit 48 MHz
108 -* Flash: 256KB
109 -* RAM: 64KB
110 -* Input Power Range: 1.8v ~~ 3.7v
111 -* Power Consumption: < 4uA.
112 -* Frequency Range: 150 MHz ~~ 960 MHz
113 -* Maximum Power +22 dBm constant RF output
114 -* High sensitivity: -148 dBm
115 -* Temperature:
116 -** Storage: -55 ~~ +125℃
117 -** Operating: -40 ~~ +85℃
118 -* Humidity:
119 -** Storage: 5 ~~ 95% (Non-Condensing)
120 -** Operating: 10 ~~ 95% (Non-Condensing)
121 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
122 -* LoRa Rx current: <9 mA
123 -* I/O Voltage: 3.3v
124 124  
125 -== 2.4  Pin Mapping & LED ==
117 +(% style="color:blue" %)**3. See Uplink Command**
126 126  
119 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
127 127  
121 +example: AT+SENDB=01,02,8,05820802581ea0a5
128 128  
129 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
123 +[[image:image-20220602162157-11.png||height="497" width="800"]]
130 130  
131 131  
132 132  
133 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
127 +(% style="color:blue" %)**4. Check to see if TTN received the message**
134 134  
135 135  
136 136  
137 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
131 +[[image:image-20220817093644-1.png]]
138 138  
139 139  
140 140  
141 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
135 +== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
142 142  
143 143  
144 -=== 2.8.1  Items needed for update ===
138 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
145 145  
146 -1. LA66 LoRaWAN Shield
147 -1. Arduino
148 -1. USB TO TTL Adapter
140 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
149 149  
150 -[[image:image-20220602100052-2.png||height="385" width="600"]]
142 +(% style="color:red" %)**Preconditions:**
151 151  
144 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
152 152  
153 -=== 2.8.2  Connection ===
146 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
154 154  
155 155  
156 -[[image:image-20220602101311-3.png||height="276" width="600"]]
157 157  
150 +(% style="color:blue" %)**Steps for usage:**
158 158  
159 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
152 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
160 160  
154 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
161 161  
162 -(% style="background-color:yellow" %)**GND  <-> GND
163 -TXD  <->  TXD
164 -RXD  <->  RXD**
156 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
165 165  
166 166  
167 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
168 168  
169 -Connect USB TTL Adapter to PC after connecting the wires
160 +== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
170 170  
171 171  
172 -[[image:image-20220602102240-4.png||height="304" width="600"]]
163 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
173 173  
174 174  
175 -=== 2.8.3  Upgrade steps ===
166 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
176 176  
168 +[[image:image-20220723100439-2.png]]
177 177  
178 -==== 1.  Switch SW1 to put in ISP position ====
179 179  
180 180  
181 -[[image:image-20220602102824-5.png||height="306" width="600"]]
172 +(% style="color:blue" %)**2. Install Minicom in RPi.**
182 182  
174 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
183 183  
184 -==== 2.  Press the RST switch once ====
176 + (% style="background-color:yellow" %)**apt update**
185 185  
186 -[[image:image-20220602104701-12.png||height="285" width="600"]]
178 + (% style="background-color:yellow" %)**apt install minicom**
187 187  
188 188  
189 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
181 +Use minicom to connect to the RPI's terminal
190 190  
183 +[[image:image-20220602153146-3.png||height="439" width="500"]]
191 191  
192 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
193 193  
194 194  
195 -[[image:image-20220602103227-6.png]]
187 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
196 196  
189 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
197 197  
198 -[[image:image-20220602103357-7.png]]
199 199  
192 +[[image:image-20220602154928-5.png||height="436" width="500"]]
200 200  
201 201  
202 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
203 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
204 204  
196 +(% style="color:blue" %)**4. Send Uplink message**
205 205  
206 -[[image:image-20220602103844-8.png]]
198 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
207 207  
200 +example: AT+SENDB=01,02,8,05820802581ea0a5
208 208  
209 209  
210 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
211 -(% style="color:blue" %)**3. Select the bin file to burn**
203 +[[image:image-20220602160339-6.png||height="517" width="600"]]
212 212  
213 213  
214 -[[image:image-20220602104144-9.png]]
215 215  
207 +Check to see if TTN received the message
216 216  
217 -[[image:image-20220602104251-10.png]]
209 +[[image:image-20220602160627-7.png||height="369" width="800"]]
218 218  
219 219  
220 -[[image:image-20220602104402-11.png]]
221 221  
213 +== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
222 222  
223 223  
224 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
225 -(% style="color:blue" %)**4. Click to start the download**
216 +=== 1.8.1  Hardware and Software Connection ===
226 226  
227 -[[image:image-20220602104923-13.png]]
228 228  
229 229  
230 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
231 -(% style="color:blue" %)**5. Check update process**
220 +==== (% style="color:blue" %)**Overview：**(%%) ====
232 232  
233 233  
234 -[[image:image-20220602104948-14.png]]
223 +(((
224 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
235 235  
226 +* Send real-time location information of mobile phone to LoRaWAN network.
227 +* Check LoRaWAN network signal strengh.
228 +* Manually send messages to LoRaWAN network.
229 +)))
236 236  
237 237  
238 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
239 -(% style="color:blue" %)**The following picture shows that the burning is successful**
240 240  
241 -[[image:image-20220602105251-15.png]]
242 242  
234 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
243 243  
236 +A USB to Type-C adapter is needed to connect to a Mobile phone.
244 244  
245 -= 3.  LA66 USB LoRaWAN Adapter =
238 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
246 246  
240 +[[image:image-20220813174353-2.png||height="360" width="313"]]
247 247  
248 -== 3.1  Overview ==
249 249  
250 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
251 251  
244 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
252 252  
253 -== 3.2  Features ==
246 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
254 254  
255 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
256 -* Ultra-long RF range
257 -* Support LoRaWAN v1.0.4 protocol
258 -* Support peer-to-peer protocol
259 -* TCXO crystal to ensure RF performance on low temperature
260 -* Spring RF antenna
261 -* Available in different frequency LoRaWAN frequency bands.
262 -* World-wide unique OTAA keys.
263 -* AT Command via UART-TTL interface
264 -* Firmware upgradable via UART interface
248 +[[image:image-20220813173738-1.png]]
265 265  
266 -== 3.3  Specification ==
267 267  
268 -* CPU: 32-bit 48 MHz
269 -* Flash: 256KB
270 -* RAM: 64KB
271 -* Input Power Range: 5v
272 -* Frequency Range: 150 MHz ~~ 960 MHz
273 -* Maximum Power +22 dBm constant RF output
274 -* High sensitivity: -148 dBm
275 -* Temperature:
276 -** Storage: -55 ~~ +125℃
277 -** Operating: -40 ~~ +85℃
278 -* Humidity:
279 -** Storage: 5 ~~ 95% (Non-Condensing)
280 -** Operating: 10 ~~ 95% (Non-Condensing)
281 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
282 -* LoRa Rx current: <9 mA
283 283  
284 -== 3.4  Pin Mapping & LED ==
252 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
285 285  
254 +Function and page introduction
286 286  
256 +[[image:image-20220723113448-7.png||height="995" width="450"]]
287 287  
288 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
258 +**Block Explain:**
289 289  
260 +1.  Display LA66 USB LoRaWAN Module connection status
290 290  
291 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
262 +2.  Check and reconnect
292 292  
264 +3.  Turn send timestamps on or off
293 293  
294 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
266 +4.  Display LoRaWan connection status
295 295  
268 +5.  Check LoRaWan connection status
296 296  
297 -[[image:image-20220602171217-1.png||height="538" width="800"]]
270 +6.  The RSSI value of the node when the ACK is received
298 298  
272 +7.  Node's Signal Strength Icon
299 299  
300 -Open the serial port tool
274 +8.  Configure Location Uplink Interval
301 301  
302 -[[image:image-20220602161617-8.png]]
276 +9.  AT command input box
303 303  
304 -[[image:image-20220602161718-9.png||height="457" width="800"]]
278 +10.  Send Button:  Send input box info to LA66 USB Adapter
305 305  
280 +11.  Output Log from LA66 USB adapter
306 306  
282 +12.  clear log button
307 307  
308 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
284 +13.  exit button
309 309  
310 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
311 311  
287 +LA66 USB LoRaWAN Module not connected
312 312  
313 -[[image:image-20220602161935-10.png||height="498" width="800"]]
289 +[[image:image-20220723110520-5.png||height="677" width="508"]]
314 314  
315 315  
316 316  
317 -(% style="color:blue" %)**3. See Uplink Command**
293 +Connect LA66 USB LoRaWAN Module
318 318  
319 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
295 +[[image:image-20220723110626-6.png||height="681" width="511"]]
320 320  
321 -example: AT+SENDB=01,02,8,05820802581ea0a5
322 322  
323 -[[image:image-20220602162157-11.png||height="497" width="800"]]
324 324  
299 +=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
325 325  
326 326  
327 -(% style="color:blue" %)**4. Check to see if TTN received the message**
302 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
328 328  
329 -[[image:image-20220602162331-12.png||height="420" width="800"]]
304 +[[image:image-20220723134549-8.png]]
330 330  
331 331  
332 332  
333 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
308 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
334 334  
310 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
335 335  
336 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
312 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
337 337  
314 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
338 338  
339 -(% style="color:red" %)**Preconditions:**
340 340  
341 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
317 +Example output in NodeRed is as below:
342 342  
343 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
319 +[[image:image-20220723144339-1.png]]
344 344  
345 345  
346 346  
347 -(% style="color:blue" %)**Steps for usage:**
323 +== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
348 348  
349 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
350 350  
351 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
326 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
352 352  
353 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
328 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
354 354  
355 355  
331 +[[image:image-20220723150132-2.png]]
356 356  
357 -== Example Send & Get Messages via LoRaWAN in RPi ==
358 358  
359 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
360 360  
361 -~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
335 += 2.  FAQ =
362 362  
363 -[[image:image-20220602171233-2.png||height="538" width="800"]]
364 364  
338 +== 2.1  How to Compile Source Code for LA66? ==
365 365  
366 -2. Install Minicom in RPi.
367 367  
368 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
341 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
369 369  
370 -(% class="mark" %)apt update
371 371  
372 -(% class="mark" %)apt install minicom
373 373  
345 += 3.  Order Info =
374 374  
375 -Use minicom to connect to the RPI's terminal
376 376  
377 -[[image:image-20220602153146-3.png||height="439" width="500"]]
348 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
378 378  
379 379  
380 -3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
381 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
351 +(% style="color:blue" %)**XXX**(%%): The default frequency band
382 382  
383 -[[image:image-20220602154928-5.png||height="436" width="500"]]
353 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
354 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
355 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
356 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
357 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
358 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
359 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
360 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
361 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
384 384  
385 385  
386 -4. Send Uplink message
387 387  
388 -Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
389 389  
390 -example: AT+SENDB=01,02,8,05820802581ea0a5
391 391  
392 -[[image:image-20220602160339-6.png||height="517" width="600"]]
367 += 4.  Reference =
393 393  
394 -Check to see if TTN received the message
395 395  
396 -[[image:image-20220602160627-7.png||height="369" width="800"]]
397 -
398 -
399 -
400 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
401 -
402 -
403 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
404 -
405 -
406 -
407 -= Order Info =
408 -
409 -Part Number:
410 -
411 -**LA66-XXX**, **LA66-LoRaWAN-Shield-XXX** or **LA66-USB-LoRaWAN-Adapter-XXX**
412 -
413 -**XXX**: The default frequency band
414 -
415 -* **AS923**: LoRaWAN AS923 band
416 -* **AU915**: LoRaWAN AU915 band
417 -* **EU433**: LoRaWAN EU433 band
418 -* **EU868**: LoRaWAN EU868 band
419 -* **KR920**: LoRaWAN KR920 band
420 -* **US915**: LoRaWAN US915 band
421 -* **IN865**: LoRaWAN IN865 band
422 -* **CN470**: LoRaWAN CN470 band
423 -* **PP**: Peer to Peer LoRa Protocol
424 -
425 -= Reference =
426 -
427 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
428 -
429 -
370 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content