Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 87.2
edited by Xiaoling
on 2022/07/13 09:34
Change comment: There is no comment for this version
To version 149.7
edited by Xiaoling
on 2022/08/22 16:24
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Content
... ... @@ -1,50 +1,68 @@
1 1  
2 2  
3 -{{box cssClass="floatinginfobox" title="**Contents**"}}
4 -{{toc/}}
5 -{{/box}}
3 +**Table of Contents:**
6 6  
7 7  {{toc/}}
8 8  
9 9  
10 10  
11 -= 1.  LA66 LoRaWAN Module =
12 12  
13 13  
14 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
15 15  
16 16  
17 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
14 +== 1.1  Overview ==
18 18  
19 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
20 20  
17 +[[image:image-20220715001142-3.png||height="145" width="220"]]
18 +
19 +
20 +(((
21 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 +)))
27 +
28 +(((
21 21  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 +)))
22 22  
32 +(((
23 23  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 +)))
24 24  
36 +(((
25 25  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 +)))
26 26  
27 27  
41 +
28 28  == 1.2  Features ==
29 29  
44 +
45 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 +* Ultra-long RF range
30 30  * Support LoRaWAN v1.0.4 protocol
31 31  * Support peer-to-peer protocol
32 32  * TCXO crystal to ensure RF performance on low temperature
33 -* SMD Antenna pad and i-pex antenna connector
50 +* Spring RF antenna
34 34  * Available in different frequency LoRaWAN frequency bands.
35 35  * World-wide unique OTAA keys.
36 36  * AT Command via UART-TTL interface
37 37  * Firmware upgradable via UART interface
38 -* Ultra-long RF range
55 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
39 39  
40 40  
58 +
41 41  == 1.3  Specification ==
42 42  
61 +
43 43  * CPU: 32-bit 48 MHz
44 44  * Flash: 256KB
45 45  * RAM: 64KB
46 -* Input Power Range: 1.8v ~~ 3.7v
47 -* Power Consumption: < 4uA.
65 +* Input Power Range: 5v
48 48  * Frequency Range: 150 MHz ~~ 960 MHz
49 49  * Maximum Power +22 dBm constant RF output
50 50  * High sensitivity: -148 dBm
... ... @@ -56,367 +56,315 @@
56 56  ** Operating: 10 ~~ 95% (Non-Condensing)
57 57  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
58 58  * LoRa Rx current: <9 mA
59 -* I/O Voltage: 3.3v
60 60  
61 61  
62 -== 1.4  AT Command ==
63 63  
64 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
80 +== 1.4  Pin Mapping & LED ==
65 65  
66 66  
67 -== 1.5  Dimension ==
83 +[[image:image-20220813183239-3.png||height="526" width="662"]]
68 68  
69 -[[image:image-20220517072526-1.png]]
70 70  
71 71  
87 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
72 72  
73 -== 1.6  Pin Mapping ==
74 74  
90 +(((
91 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
92 +)))
75 75  
76 -[[image:image-20220523101537-1.png]]
77 77  
95 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
78 78  
79 79  
80 -== 1.7  Land Pattern ==
98 +[[image:image-20220723100027-1.png]]
81 81  
82 -[[image:image-20220517072821-2.png]]
83 83  
101 +Open the serial port tool
84 84  
103 +[[image:image-20220602161617-8.png]]
85 85  
86 -= 2.  LA66 LoRaWAN Shield =
105 +[[image:image-20220602161718-9.png||height="457" width="800"]]
87 87  
88 88  
89 -== 2.1  Overview ==
90 90  
91 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
109 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
92 92  
93 93  
94 -== 2.2  Features ==
112 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
95 95  
96 -* Arduino Shield base on LA66 LoRaWAN module
97 -* Support LoRaWAN v1.0.4 protocol
98 -* Support peer-to-peer protocol
99 -* TCXO crystal to ensure RF performance on low temperature
100 -* SMA connector
101 -* Available in different frequency LoRaWAN frequency bands.
102 -* World-wide unique OTAA keys.
103 -* AT Command via UART-TTL interface
104 -* Firmware upgradable via UART interface
105 -* Ultra-long RF range
106 106  
115 +[[image:image-20220602161935-10.png||height="498" width="800"]]
107 107  
108 -== 2.3  Specification ==
109 109  
110 -* CPU: 32-bit 48 MHz
111 -* Flash: 256KB
112 -* RAM: 64KB
113 -* Input Power Range: 1.8v ~~ 3.7v
114 -* Power Consumption: < 4uA.
115 -* Frequency Range: 150 MHz ~~ 960 MHz
116 -* Maximum Power +22 dBm constant RF output
117 -* High sensitivity: -148 dBm
118 -* Temperature:
119 -** Storage: -55 ~~ +125℃
120 -** Operating: -40 ~~ +85℃
121 -* Humidity:
122 -** Storage: 5 ~~ 95% (Non-Condensing)
123 -** Operating: 10 ~~ 95% (Non-Condensing)
124 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
125 -* LoRa Rx current: <9 mA
126 -* I/O Voltage: 3.3v
127 127  
119 +(% style="color:blue" %)**3. See Uplink Command**
128 128  
129 -== 2.4  Pin Mapping & LED ==
130 130  
122 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
131 131  
124 +example: AT+SENDB=01,02,8,05820802581ea0a5
132 132  
133 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
126 +[[image:image-20220602162157-11.png||height="497" width="800"]]
134 134  
135 135  
136 136  
137 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
130 +(% style="color:blue" %)**4. Check to see if TTN received the message**
138 138  
139 139  
133 +[[image:image-20220817093644-1.png]]
140 140  
141 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
142 142  
143 143  
137 +== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
144 144  
145 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
146 146  
140 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
147 147  
148 -=== 2.8.1  Items needed for update ===
142 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
149 149  
150 -1. LA66 LoRaWAN Shield
151 -1. Arduino
152 -1. USB TO TTL Adapter
153 153  
154 -[[image:image-20220602100052-2.png||height="385" width="600"]]
145 +(% style="color:red" %)**Preconditions:**
155 155  
147 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
156 156  
157 -=== 2.8.2  Connection ===
149 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
158 158  
159 159  
160 -[[image:image-20220602101311-3.png||height="276" width="600"]]
161 161  
153 +(% style="color:blue" %)**Steps for usage:**
162 162  
163 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
155 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
164 164  
157 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
165 165  
166 -(% style="background-color:yellow" %)**GND  <-> GND
167 -TXD  <->  TXD
168 -RXD  <->  RXD**
169 169  
160 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
170 170  
171 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
172 172  
173 -Connect USB TTL Adapter to PC after connecting the wires
174 174  
164 +== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
175 175  
176 -[[image:image-20220602102240-4.png||height="304" width="600"]]
177 177  
167 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
178 178  
179 -=== 2.8.3  Upgrade steps ===
180 180  
170 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
181 181  
182 -==== 1.  Switch SW1 to put in ISP position ====
183 183  
173 +[[image:image-20220723100439-2.png]]
184 184  
185 -[[image:image-20220602102824-5.png||height="306" width="600"]]
186 186  
187 187  
188 -==== 2.  Press the RST switch once ====
177 +(% style="color:blue" %)**2. Install Minicom in RPi.**
189 189  
190 -[[image:image-20220602104701-12.png||height="285" width="600"]]
191 191  
180 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
192 192  
193 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
182 + (% style="background-color:yellow" %)**apt update**
194 194  
184 + (% style="background-color:yellow" %)**apt install minicom**
195 195  
196 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
197 197  
187 +Use minicom to connect to the RPI's terminal
198 198  
199 -[[image:image-20220602103227-6.png]]
189 +[[image:image-20220602153146-3.png||height="439" width="500"]]
200 200  
201 201  
202 -[[image:image-20220602103357-7.png]]
203 203  
193 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
204 204  
205 205  
206 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
207 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
196 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
208 208  
209 209  
210 -[[image:image-20220602103844-8.png]]
199 +[[image:image-20220602154928-5.png||height="436" width="500"]]
211 211  
212 212  
213 213  
214 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
215 -(% style="color:blue" %)**3. Select the bin file to burn**
203 +(% style="color:blue" %)**4. Send Uplink message**
216 216  
217 217  
218 -[[image:image-20220602104144-9.png]]
206 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
219 219  
208 +example: AT+SENDB=01,02,8,05820802581ea0a5
220 220  
221 -[[image:image-20220602104251-10.png]]
222 222  
211 +[[image:image-20220602160339-6.png||height="517" width="600"]]
223 223  
224 -[[image:image-20220602104402-11.png]]
225 225  
226 226  
215 +Check to see if TTN received the message
227 227  
228 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
229 -(% style="color:blue" %)**4. Click to start the download**
217 +[[image:image-20220602160627-7.png||height="369" width="800"]]
230 230  
231 -[[image:image-20220602104923-13.png]]
232 232  
233 233  
234 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
235 -(% style="color:blue" %)**5. Check update process**
221 +== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
236 236  
237 237  
238 -[[image:image-20220602104948-14.png]]
224 +=== 1.8.1  Hardware and Software Connection ===
239 239  
240 240  
241 241  
242 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
243 -(% style="color:blue" %)**The following picture shows that the burning is successful**
228 +==== (% style="color:blue" %)**Overview：**(%%) ====
244 244  
245 -[[image:image-20220602105251-15.png]]
246 246  
231 +(((
232 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
247 247  
234 +* Send real-time location information of mobile phone to LoRaWAN network.
235 +* Check LoRaWAN network signal strengh.
236 +* Manually send messages to LoRaWAN network.
237 +)))
248 248  
249 -= 3.  LA66 USB LoRaWAN Adapter =
250 250  
251 251  
252 -== 3.1  Overview ==
253 253  
254 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
242 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
255 255  
256 256  
257 -== 3.2  Features ==
245 +A USB to Type-C adapter is needed to connect to a Mobile phone.
258 258  
259 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
260 -* Ultra-long RF range
261 -* Support LoRaWAN v1.0.4 protocol
262 -* Support peer-to-peer protocol
263 -* TCXO crystal to ensure RF performance on low temperature
264 -* Spring RF antenna
265 -* Available in different frequency LoRaWAN frequency bands.
266 -* World-wide unique OTAA keys.
267 -* AT Command via UART-TTL interface
268 -* Firmware upgradable via UART interface
247 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
269 269  
270 -== Specification ==
249 +[[image:image-20220813174353-2.png||height="360" width="313"]]
271 271  
272 -* CPU: 32-bit 48 MHz
273 -* Flash: 256KB
274 -* RAM: 64KB
275 -* Input Power Range: 5v
276 -* Frequency Range: 150 MHz ~~ 960 MHz
277 -* Maximum Power +22 dBm constant RF output
278 -* High sensitivity: -148 dBm
279 -* Temperature:
280 -** Storage: -55 ~~ +125℃
281 -** Operating: -40 ~~ +85℃
282 -* Humidity:
283 -** Storage: 5 ~~ 95% (Non-Condensing)
284 -** Operating: 10 ~~ 95% (Non-Condensing)
285 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
286 -* LoRa Rx current: <9 mA
287 287  
288 -== Pin Mapping & LED ==
289 289  
290 -== Example Send & Get Messages via LoRaWAN in PC ==
253 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
291 291  
292 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
293 293  
294 -~1. Connect the LA66 USB LoRaWAN adapter to PC
256 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
295 295  
296 -[[image:image-20220602171217-1.png||height="538" width="800"]]
258 +[[image:image-20220813173738-1.png]]
297 297  
298 -Open the serial port tool
299 299  
300 -[[image:image-20220602161617-8.png]]
301 301  
302 -[[image:image-20220602161718-9.png||height="457" width="800"]]
262 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
303 303  
304 304  
305 -2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
265 +Function and page introduction
306 306  
307 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
308 308  
309 -[[image:image-20220602161935-10.png||height="498" width="800"]]
268 +[[image:image-20220723113448-7.png||height="995" width="450"]]
310 310  
270 +**Block Explain:**
311 311  
312 -3. See Uplink Command
272 +1.  Display LA66 USB LoRaWAN Module connection status
313 313  
314 -Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
274 +2.  Check and reconnect
315 315  
316 -example: AT+SENDB=01,02,8,05820802581ea0a5
276 +3.  Turn send timestamps on or off
317 317  
318 -[[image:image-20220602162157-11.png||height="497" width="800"]]
278 +4.  Display LoRaWan connection status
319 319  
280 +5.  Check LoRaWan connection status
320 320  
321 -4. Check to see if TTN received the message
282 +6.  The RSSI value of the node when the ACK is received
322 322  
323 -[[image:image-20220602162331-12.png||height="420" width="800"]]
284 +7.  Node's Signal Strength Icon
324 324  
286 +8.  Configure Location Uplink Interval
325 325  
288 +9.  AT command input box
326 326  
327 -== Example:Send PC's CPU/RAM usage to TTN via python ==
290 +10.  Send Button:  Send input box info to LA66 USB Adapter
328 328  
329 -(% class="wikigeneratedid" id="HUsepythonasanexampleFF1A" %)
330 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
292 +11.  Output Log from LA66 USB adapter
331 331  
332 -(% class="wikigeneratedid" id="HPreconditions:" %)
333 -**Preconditions:**
294 +12.  clear log button
334 334  
335 -1.LA66 USB LoRaWAN Adapter works fine
296 +13.  exit button
336 336  
337 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
338 338  
339 -(% class="wikigeneratedid" id="HStepsforusage" %)
340 -**Steps for usage**
341 341  
342 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
300 +LA66 USB LoRaWAN Module not connected
343 343  
344 -2.Run the python script in PC and see the TTN
345 345  
346 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
303 +[[image:image-20220723110520-5.png||height="677" width="508"]]
347 347  
348 348  
349 349  
350 -== Example Send & Get Messages via LoRaWAN in RPi ==
307 +Connect LA66 USB LoRaWAN Module
351 351  
352 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
309 +[[image:image-20220723110626-6.png||height="681" width="511"]]
353 353  
354 -~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
355 355  
356 -[[image:image-20220602171233-2.png||height="538" width="800"]]
357 357  
313 +=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
358 358  
359 -2. Install Minicom in RPi.
360 360  
361 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
316 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
362 362  
363 -(% class="mark" %)apt update
364 364  
365 -(% class="mark" %)apt install minicom
319 +[[image:image-20220723134549-8.png]]
366 366  
367 367  
368 -Use minicom to connect to the RPI's terminal
369 369  
370 -[[image:image-20220602153146-3.png||height="439" width="500"]]
323 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
371 371  
372 372  
373 -3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
374 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
326 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
375 375  
376 -[[image:image-20220602154928-5.png||height="436" width="500"]]
328 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
377 377  
330 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
378 378  
379 -4. Send Uplink message
380 380  
381 -Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
333 +Example output in NodeRed is as below:
382 382  
383 -example: AT+SENDB=01,02,8,05820802581ea0a5
335 +[[image:image-20220723144339-1.png]]
384 384  
385 -[[image:image-20220602160339-6.png||height="517" width="600"]]
386 386  
387 -Check to see if TTN received the message
388 388  
389 -[[image:image-20220602160627-7.png||height="369" width="800"]]
339 +== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
390 390  
391 391  
342 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
392 392  
393 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
344 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
394 394  
395 395  
396 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
347 +[[image:image-20220723150132-2.png]]
397 397  
398 398  
399 399  
400 -= Order Info =
351 += 2.  FAQ =
401 401  
402 -Part Number:
403 403  
404 -**LA66-XXX**, **LA66-LoRaWAN-Shield-XXX** or **LA66-USB-LoRaWAN-Adapter-XXX**
354 +== 2.1  How to Compile Source Code for LA66? ==
405 405  
406 -**XXX**: The default frequency band
407 407  
408 -* **AS923**: LoRaWAN AS923 band
409 -* **AU915**: LoRaWAN AU915 band
410 -* **EU433**: LoRaWAN EU433 band
411 -* **EU868**: LoRaWAN EU868 band
412 -* **KR920**: LoRaWAN KR920 band
413 -* **US915**: LoRaWAN US915 band
414 -* **IN865**: LoRaWAN IN865 band
415 -* **CN470**: LoRaWAN CN470 band
416 -* **PP**: Peer to Peer LoRa Protocol
357 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
417 417  
418 -= Reference =
419 419  
420 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
421 421  
361 += 3.  Order Info =
362 +
363 +
364 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
365 +
366 +
367 +(% style="color:blue" %)**XXX**(%%): The default frequency band
368 +
369 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
370 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
371 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
372 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
373 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
374 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
375 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
376 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
377 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
378 +
379 +
380 +
381 +
382 += 4.  Reference =
383 +
384 +
385 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
386 +
387 +
422 422  
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content