Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 87.16 >
edited by Xiaoling
on 2022/07/13 10:10
To version < 155.1 >
edited by Bei Jinggeng
on 2022/09/09 15:22
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Bei
Content
... ... @@ -6,18 +6,23 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
14 14  
14 +== 1.1  Overview ==
15 +
16 +
17 +[[image:image-20220715001142-3.png||height="145" width="220"]]
18 +
19 +
15 15  (((
16 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
21 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
17 17  )))
18 18  
19 19  (((
20 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
21 21  )))
22 22  
23 23  (((
... ... @@ -33,27 +33,29 @@
33 33  )))
34 34  
35 35  
41 +
36 36  == 1.2  Features ==
37 37  
44 +
45 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 +* Ultra-long RF range
38 38  * Support LoRaWAN v1.0.4 protocol
39 39  * Support peer-to-peer protocol
40 40  * TCXO crystal to ensure RF performance on low temperature
41 -* SMD Antenna pad and i-pex antenna connector
50 +* Spring RF antenna
42 42  * Available in different frequency LoRaWAN frequency bands.
43 43  * World-wide unique OTAA keys.
44 44  * AT Command via UART-TTL interface
45 45  * Firmware upgradable via UART interface
46 -* Ultra-long RF range
55 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
47 47  
48 -
49 -
50 50  == 1.3  Specification ==
51 51  
59 +
52 52  * CPU: 32-bit 48 MHz
53 53  * Flash: 256KB
54 54  * RAM: 64KB
55 -* Input Power Range: 1.8v ~~ 3.7v
56 -* Power Consumption: < 4uA.
63 +* Input Power Range: 5v
57 57  * Frequency Range: 150 MHz ~~ 960 MHz
58 58  * Maximum Power +22 dBm constant RF output
59 59  * High sensitivity: -148 dBm
... ... @@ -65,391 +65,335 @@
65 65  ** Operating: 10 ~~ 95% (Non-Condensing)
66 66  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
67 67  * LoRa Rx current: <9 mA
68 -* I/O Voltage: 3.3v
69 69  
76 +== 1.4  Pin Mapping & LED ==
70 70  
71 71  
72 -== 1.4  AT Command ==
79 +[[image:image-20220813183239-3.png||height="526" width="662"]]
73 73  
74 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
75 75  
76 76  
77 -== 1.5  Dimension ==
83 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
78 78  
79 -[[image:image-20220517072526-1.png]]
80 80  
86 +(((
87 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
88 +)))
81 81  
82 82  
83 -== 1.6  Pin Mapping ==
91 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
84 84  
85 85  
86 -[[image:image-20220523101537-1.png]]
94 +[[image:image-20220723100027-1.png]]
87 87  
88 88  
97 +Open the serial port tool
89 89  
90 -== 1.7  Land Pattern ==
99 +[[image:image-20220602161617-8.png]]
91 91  
92 -[[image:image-20220517072821-2.png]]
101 +[[image:image-20220602161718-9.png||height="457" width="800"]]
93 93  
94 94  
95 95  
96 -= 2.  LA66 LoRaWAN Shield =
105 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
97 97  
98 98  
99 -== 2.1  Overview ==
108 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
100 100  
101 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
102 102  
111 +[[image:image-20220602161935-10.png||height="498" width="800"]]
103 103  
104 -== 2.2  Features ==
105 105  
106 -* Arduino Shield base on LA66 LoRaWAN module
107 -* Support LoRaWAN v1.0.4 protocol
108 -* Support peer-to-peer protocol
109 -* TCXO crystal to ensure RF performance on low temperature
110 -* SMA connector
111 -* Available in different frequency LoRaWAN frequency bands.
112 -* World-wide unique OTAA keys.
113 -* AT Command via UART-TTL interface
114 -* Firmware upgradable via UART interface
115 -* Ultra-long RF range
116 116  
115 +(% style="color:blue" %)**3. See Uplink Command**
117 117  
118 118  
119 -== 2.3  Specification ==
118 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
120 120  
121 -* CPU: 32-bit 48 MHz
122 -* Flash: 256KB
123 -* RAM: 64KB
124 -* Input Power Range: 1.8v ~~ 3.7v
125 -* Power Consumption: < 4uA.
126 -* Frequency Range: 150 MHz ~~ 960 MHz
127 -* Maximum Power +22 dBm constant RF output
128 -* High sensitivity: -148 dBm
129 -* Temperature:
130 -** Storage: -55 ~~ +125℃
131 -** Operating: -40 ~~ +85℃
132 -* Humidity:
133 -** Storage: 5 ~~ 95% (Non-Condensing)
134 -** Operating: 10 ~~ 95% (Non-Condensing)
135 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
136 -* LoRa Rx current: <9 mA
137 -* I/O Voltage: 3.3v
120 +example: AT+SENDB=01,02,8,05820802581ea0a5
138 138  
122 +[[image:image-20220602162157-11.png||height="497" width="800"]]
139 139  
140 140  
141 -== 2.4  Pin Mapping & LED ==
142 142  
126 +(% style="color:blue" %)**4. Check to see if TTN received the message**
143 143  
144 144  
145 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
129 +[[image:image-20220817093644-1.png]]
146 146  
147 147  
148 148  
149 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
133 +== 1.6  Example: How to join helium ==
150 150  
135 +(% style="color:blue" %)**1. Create a new device.**
151 151  
137 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
152 152  
153 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
154 154  
140 +(% style="color:blue" %)**2. Save the device after filling in the necessary information.**
155 155  
142 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
156 156  
157 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
158 158  
145 +(% style="color:blue" %)**3.  Use AT commands.**
159 159  
160 -=== 2.8.1  Items needed for update ===
147 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
161 161  
162 -1. LA66 LoRaWAN Shield
163 -1. Arduino
164 -1. USB TO TTL Adapter
165 165  
150 +(% style="color:blue" %)**4..  Use the serial port tool**
166 166  
152 +[[image:image-20220909151517-2.png||height="543" width="708"]]
167 167  
168 168  
169 -[[image:image-20220602100052-2.png||height="385" width="600"]]
155 +(% style="color:blue" %)**5.Use command AT+CFG to get device configuration**
170 170  
157 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
171 171  
172 -=== 2.8.2  Connection ===
173 173  
160 +(% style="color:blue" %)**6.  Network successfully.**
174 174  
175 -[[image:image-20220602101311-3.png||height="276" width="600"]]
162 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
176 176  
177 177  
178 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
165 +(% style="color:blue" %)**7.  Send uplink using command**
179 179  
180 -(((
181 -(% style="background-color:yellow" %)**GND  <-> GND
182 -TXD  <->  TXD
183 -RXD  <->  RXD**
184 -)))
167 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170659-5.png?rev=1.1||alt="image-20220907170659-5.png"]]
185 185  
169 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
186 186  
187 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
188 188  
189 -Connect USB TTL Adapter to PC after connecting the wires
172 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
190 190  
191 191  
192 -[[image:image-20220602102240-4.png||height="304" width="600"]]
175 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
193 193  
177 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
194 194  
195 -=== 2.8.3  Upgrade steps ===
196 196  
180 +(% style="color:red" %)**Preconditions:**
197 197  
198 -==== 1.  Switch SW1 to put in ISP position ====
182 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
199 199  
184 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
200 200  
201 -[[image:image-20220602102824-5.png||height="306" width="600"]]
202 202  
203 203  
188 +(% style="color:blue" %)**Steps for usage:**
204 204  
205 -==== 2.  Press the RST switch once ====
190 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
206 206  
192 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
207 207  
208 -[[image:image-20220602104701-12.png||height="285" width="600"]]
209 209  
195 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
210 210  
211 211  
212 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
213 213  
199 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
214 214  
215 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
216 216  
202 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
217 217  
218 -[[image:image-20220602103227-6.png]]
219 219  
205 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
220 220  
221 -[[image:image-20220602103357-7.png]]
222 222  
208 +[[image:image-20220723100439-2.png]]
223 223  
224 224  
225 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
226 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
227 227  
212 +(% style="color:blue" %)**2. Install Minicom in RPi.**
228 228  
229 -[[image:image-20220602103844-8.png]]
230 230  
215 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
231 231  
217 + (% style="background-color:yellow" %)**apt update**
232 232  
233 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
234 -(% style="color:blue" %)**3. Select the bin file to burn**
219 + (% style="background-color:yellow" %)**apt install minicom**
235 235  
236 236  
237 -[[image:image-20220602104144-9.png]]
222 +Use minicom to connect to the RPI's terminal
238 238  
224 +[[image:image-20220602153146-3.png||height="439" width="500"]]
239 239  
240 -[[image:image-20220602104251-10.png]]
241 241  
242 242  
243 -[[image:image-20220602104402-11.png]]
228 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
244 244  
245 245  
231 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
246 246  
247 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
248 -(% style="color:blue" %)**4. Click to start the download**
249 249  
250 -[[image:image-20220602104923-13.png]]
234 +[[image:image-20220602154928-5.png||height="436" width="500"]]
251 251  
252 252  
253 253  
254 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
255 -(% style="color:blue" %)**5. Check update process**
238 +(% style="color:blue" %)**4. Send Uplink message**
256 256  
257 257  
258 -[[image:image-20220602104948-14.png]]
241 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
259 259  
243 +example: AT+SENDB=01,02,8,05820802581ea0a5
260 260  
261 261  
262 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
263 -(% style="color:blue" %)**The following picture shows that the burning is successful**
246 +[[image:image-20220602160339-6.png||height="517" width="600"]]
264 264  
265 -[[image:image-20220602105251-15.png]]
266 266  
267 267  
250 +Check to see if TTN received the message
268 268  
269 -= 3.  LA66 USB LoRaWAN Adapter =
252 +[[image:image-20220602160627-7.png||height="369" width="800"]]
270 270  
271 271  
272 -== 3.1  Overview ==
273 273  
274 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
256 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
275 275  
276 276  
277 -== 3.2  Features ==
259 +=== 1.9.1  Hardware and Software Connection ===
278 278  
279 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
280 -* Ultra-long RF range
281 -* Support LoRaWAN v1.0.4 protocol
282 -* Support peer-to-peer protocol
283 -* TCXO crystal to ensure RF performance on low temperature
284 -* Spring RF antenna
285 -* Available in different frequency LoRaWAN frequency bands.
286 -* World-wide unique OTAA keys.
287 -* AT Command via UART-TTL interface
288 -* Firmware upgradable via UART interface
289 289  
290 290  
263 +==== (% style="color:blue" %)**Overview：**(%%) ====
291 291  
292 -== 3.3  Specification ==
293 293  
294 -* CPU: 32-bit 48 MHz
295 -* Flash: 256KB
296 -* RAM: 64KB
297 -* Input Power Range: 5v
298 -* Frequency Range: 150 MHz ~~ 960 MHz
299 -* Maximum Power +22 dBm constant RF output
300 -* High sensitivity: -148 dBm
301 -* Temperature:
302 -** Storage: -55 ~~ +125℃
303 -** Operating: -40 ~~ +85℃
304 -* Humidity:
305 -** Storage: 5 ~~ 95% (Non-Condensing)
306 -** Operating: 10 ~~ 95% (Non-Condensing)
307 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
308 -* LoRa Rx current: <9 mA
266 +(((
267 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
309 309  
269 +* Send real-time location information of mobile phone to LoRaWAN network.
270 +* Check LoRaWAN network signal strengh.
271 +* Manually send messages to LoRaWAN network.
272 +)))
310 310  
311 311  
312 -== 3.4  Pin Mapping & LED ==
313 313  
314 314  
277 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
315 315  
316 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
317 317  
280 +A USB to Type-C adapter is needed to connect to a Mobile phone.
318 318  
319 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
282 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
320 320  
284 +[[image:image-20220813174353-2.png||height="360" width="313"]]
321 321  
322 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
323 323  
324 324  
325 -[[image:image-20220602171217-1.png||height="538" width="800"]]
288 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
326 326  
327 327  
328 -Open the serial port tool
291 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
329 329  
330 -[[image:image-20220602161617-8.png]]
293 +[[image:image-20220813173738-1.png]]
331 331  
332 -[[image:image-20220602161718-9.png||height="457" width="800"]]
333 333  
334 334  
297 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
335 335  
336 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
337 337  
338 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
300 +Function and page introduction
339 339  
340 340  
341 -[[image:image-20220602161935-10.png||height="498" width="800"]]
303 +[[image:image-20220723113448-7.png||height="995" width="450"]]
342 342  
305 +**Block Explain:**
343 343  
307 +1.  Display LA66 USB LoRaWAN Module connection status
344 344  
345 -(% style="color:blue" %)**3. See Uplink Command**
309 +2.  Check and reconnect
346 346  
347 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
311 +3.  Turn send timestamps on or off
348 348  
349 -example: AT+SENDB=01,02,8,05820802581ea0a5
313 +4.  Display LoRaWan connection status
350 350  
351 -[[image:image-20220602162157-11.png||height="497" width="800"]]
315 +5.  Check LoRaWan connection status
352 352  
317 +6.  The RSSI value of the node when the ACK is received
353 353  
319 +7.  Node's Signal Strength Icon
354 354  
355 -(% style="color:blue" %)**4. Check to see if TTN received the message**
321 +8.  Configure Location Uplink Interval
356 356  
357 -[[image:image-20220602162331-12.png||height="420" width="800"]]
323 +9.  AT command input box
358 358  
325 +10.  Send Button:  Send input box info to LA66 USB Adapter
359 359  
327 +11.  Output Log from LA66 USB adapter
360 360  
361 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
329 +12.  clear log button
362 362  
331 +13.  exit button
363 363  
364 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
365 365  
366 366  
367 -(% style="color:red" %)**Preconditions:**
335 +LA66 USB LoRaWAN Module not connected
368 368  
369 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
370 370  
371 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
338 +[[image:image-20220723110520-5.png||height="677" width="508"]]
372 372  
373 373  
374 374  
375 -(% style="color:blue" %)**Steps for usage:**
342 +Connect LA66 USB LoRaWAN Module
376 376  
377 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
344 +[[image:image-20220723110626-6.png||height="681" width="511"]]
378 378  
379 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
380 380  
381 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
382 382  
348 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
383 383  
384 384  
385 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
351 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
386 386  
387 387  
388 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
354 +[[image:image-20220723134549-8.png]]
389 389  
390 390  
391 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
392 392  
393 -[[image:image-20220602171233-2.png||height="538" width="800"]]
358 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
394 394  
395 395  
361 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
396 396  
397 -(% style="color:blue" %)**2. Install Minicom in RPi.**
363 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
398 398  
399 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
365 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
400 400  
401 - (% style="background-color:yellow" %)**apt update**
367 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
402 402  
403 - (% style="background-color:yellow" %)**apt install minicom**
404 404  
370 +Example output in NodeRed is as below:
405 405  
406 -Use minicom to connect to the RPI's terminal
372 +[[image:image-20220723144339-1.png]]
407 407  
408 -[[image:image-20220602153146-3.png||height="439" width="500"]]
409 409  
410 410  
376 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
411 411  
412 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
413 413  
414 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
379 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
415 415  
381 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
416 416  
417 -[[image:image-20220602154928-5.png||height="436" width="500"]]
418 418  
384 +[[image:image-20220723150132-2.png]]
419 419  
420 420  
421 -(% style="color:blue" %)**4. Send Uplink message**
422 422  
423 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
388 += 2.  FAQ =
424 424  
425 -example: AT+SENDB=01,02,8,05820802581ea0a5
426 426  
391 +== 2.1  How to Compile Source Code for LA66? ==
427 427  
428 -[[image:image-20220602160339-6.png||height="517" width="600"]]
429 429  
394 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
430 430  
431 431  
432 -Check to see if TTN received the message
433 433  
434 -[[image:image-20220602160627-7.png||height="369" width="800"]]
398 += 3.  Order Info =
435 435  
436 436  
401 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
437 437  
438 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
439 439  
440 -
441 -
442 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
443 -
444 -
445 -
446 -
447 -= 4.  Order Info =
448 -
449 -
450 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
451 -
452 -
453 453  (% style="color:blue" %)**XXX**(%%): The default frequency band
454 454  
455 455  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -462,10 +462,10 @@
462 462  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
463 463  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
464 464  
416 += 4.  Reference =
465 465  
466 466  
467 -= 5.  Reference =
419 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
420 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
468 468  
469 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
470 -
471 471  
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0