Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 87.15 >
edited by Xiaoling
on 2022/07/13 10:09
To version < 148.2 >
edited by Xiaoling
on 2022/08/17 08:46
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Content
... ... @@ -6,18 +6,23 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
14 14  
14 +== 1.1  Overview ==
15 +
16 +
17 +[[image:image-20220715001142-3.png||height="145" width="220"]]
18 +
19 +
15 15  (((
16 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
21 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
17 17  )))
18 18  
19 19  (((
20 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
21 21  )))
22 22  
23 23  (((
... ... @@ -33,96 +33,31 @@
33 33  )))
34 34  
35 35  
41 +
36 36  == 1.2  Features ==
37 37  
44 +
45 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 +* Ultra-long RF range
38 38  * Support LoRaWAN v1.0.4 protocol
39 39  * Support peer-to-peer protocol
40 40  * TCXO crystal to ensure RF performance on low temperature
41 -* SMD Antenna pad and i-pex antenna connector
50 +* Spring RF antenna
42 42  * Available in different frequency LoRaWAN frequency bands.
43 43  * World-wide unique OTAA keys.
44 44  * AT Command via UART-TTL interface
45 45  * Firmware upgradable via UART interface
46 -* Ultra-long RF range
55 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
47 47  
48 48  
49 49  
50 50  == 1.3  Specification ==
51 51  
52 -* CPU: 32-bit 48 MHz
53 -* Flash: 256KB
54 -* RAM: 64KB
55 -* Input Power Range: 1.8v ~~ 3.7v
56 -* Power Consumption: < 4uA.
57 -* Frequency Range: 150 MHz ~~ 960 MHz
58 -* Maximum Power +22 dBm constant RF output
59 -* High sensitivity: -148 dBm
60 -* Temperature:
61 -** Storage: -55 ~~ +125℃
62 -** Operating: -40 ~~ +85℃
63 -* Humidity:
64 -** Storage: 5 ~~ 95% (Non-Condensing)
65 -** Operating: 10 ~~ 95% (Non-Condensing)
66 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
67 -* LoRa Rx current: <9 mA
68 -* I/O Voltage: 3.3v
69 69  
70 -
71 -
72 -== 1.4  AT Command ==
73 -
74 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
75 -
76 -
77 -== 1.5  Dimension ==
78 -
79 -[[image:image-20220517072526-1.png]]
80 -
81 -
82 -
83 -== 1.6  Pin Mapping ==
84 -
85 -
86 -[[image:image-20220523101537-1.png]]
87 -
88 -
89 -
90 -== 1.7  Land Pattern ==
91 -
92 -[[image:image-20220517072821-2.png]]
93 -
94 -
95 -
96 -= 2.  LA66 LoRaWAN Shield =
97 -
98 -
99 -== 2.1  Overview ==
100 -
101 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
102 -
103 -
104 -== 2.2  Features ==
105 -
106 -* Arduino Shield base on LA66 LoRaWAN module
107 -* Support LoRaWAN v1.0.4 protocol
108 -* Support peer-to-peer protocol
109 -* TCXO crystal to ensure RF performance on low temperature
110 -* SMA connector
111 -* Available in different frequency LoRaWAN frequency bands.
112 -* World-wide unique OTAA keys.
113 -* AT Command via UART-TTL interface
114 -* Firmware upgradable via UART interface
115 -* Ultra-long RF range
116 -
117 -
118 -
119 -== 2.3  Specification ==
120 -
121 121  * CPU: 32-bit 48 MHz
122 122  * Flash: 256KB
123 123  * RAM: 64KB
124 -* Input Power Range: 1.8v ~~ 3.7v
125 -* Power Consumption: < 4uA.
65 +* Input Power Range: 5v
126 126  * Frequency Range: 150 MHz ~~ 960 MHz
127 127  * Maximum Power +22 dBm constant RF output
128 128  * High sensitivity: -148 dBm
... ... @@ -134,320 +134,277 @@
134 134  ** Operating: 10 ~~ 95% (Non-Condensing)
135 135  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
136 136  * LoRa Rx current: <9 mA
137 -* I/O Voltage: 3.3v
138 138  
139 139  
140 140  
141 -== 2.4  Pin Mapping & LED ==
80 +== 1.4  Pin Mapping & LED ==
142 142  
82 +[[image:image-20220813183239-3.png||height="526" width="662"]]
143 143  
144 144  
145 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
146 146  
86 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
147 147  
148 148  
149 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
89 +(((
90 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
91 +)))
150 150  
151 151  
94 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
152 152  
153 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
154 154  
97 +[[image:image-20220723100027-1.png]]
155 155  
156 156  
157 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
100 +Open the serial port tool
158 158  
102 +[[image:image-20220602161617-8.png]]
159 159  
160 -=== 2.8.1  Items needed for update ===
104 +[[image:image-20220602161718-9.png||height="457" width="800"]]
161 161  
162 -1. LA66 LoRaWAN Shield
163 -1. Arduino
164 -1. USB TO TTL Adapter
165 165  
166 166  
108 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
167 167  
110 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
168 168  
169 -[[image:image-20220602100052-2.png||height="385" width="600"]]
170 170  
113 +[[image:image-20220602161935-10.png||height="498" width="800"]]
171 171  
172 -=== 2.8.2  Connection ===
173 173  
174 174  
175 -[[image:image-20220602101311-3.png||height="276" width="600"]]
117 +(% style="color:blue" %)**3. See Uplink Command**
176 176  
119 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
177 177  
178 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
121 +example: AT+SENDB=01,02,8,05820802581ea0a5
179 179  
180 -(% style="background-color:yellow" %)**GND  <-> GND
181 -TXD  <->  TXD
182 -RXD  <->  RXD**
123 +[[image:image-20220602162157-11.png||height="497" width="800"]]
183 183  
184 184  
185 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
186 186  
187 -Connect USB TTL Adapter to PC after connecting the wires
127 +(% style="color:blue" %)**4. Check to see if TTN received the message**
188 188  
129 +[[image:image-20220817084532-1.jpeg||height="563" width="1076"]]
189 189  
190 -[[image:image-20220602102240-4.png||height="304" width="600"]]
191 191  
192 192  
193 -=== 2.8.3  Upgrade steps ===
133 +== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
194 194  
195 195  
196 -==== 1.  Switch SW1 to put in ISP position ====
136 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
197 197  
138 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
198 198  
199 -[[image:image-20220602102824-5.png||height="306" width="600"]]
140 +(% style="color:red" %)**Preconditions:**
200 200  
142 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
201 201  
144 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
202 202  
203 -==== 2.  Press the RST switch once ====
204 204  
205 205  
206 -[[image:image-20220602104701-12.png||height="285" width="600"]]
148 +(% style="color:blue" %)**Steps for usage:**
207 207  
150 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
208 208  
152 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
209 209  
210 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
154 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
211 211  
212 212  
213 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
214 214  
158 +== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
215 215  
216 -[[image:image-20220602103227-6.png]]
217 217  
161 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
218 218  
219 -[[image:image-20220602103357-7.png]]
220 220  
164 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
221 221  
166 +[[image:image-20220723100439-2.png]]
222 222  
223 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
224 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
225 225  
226 226  
227 -[[image:image-20220602103844-8.png]]
170 +(% style="color:blue" %)**2. Install Minicom in RPi.**
228 228  
172 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
229 229  
174 + (% style="background-color:yellow" %)**apt update**
230 230  
231 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
232 -(% style="color:blue" %)**3. Select the bin file to burn**
176 + (% style="background-color:yellow" %)**apt install minicom**
233 233  
234 234  
235 -[[image:image-20220602104144-9.png]]
179 +Use minicom to connect to the RPI's terminal
236 236  
181 +[[image:image-20220602153146-3.png||height="439" width="500"]]
237 237  
238 -[[image:image-20220602104251-10.png]]
239 239  
240 240  
241 -[[image:image-20220602104402-11.png]]
185 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
242 242  
187 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
243 243  
244 244  
245 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
246 -(% style="color:blue" %)**4. Click to start the download**
190 +[[image:image-20220602154928-5.png||height="436" width="500"]]
247 247  
248 -[[image:image-20220602104923-13.png]]
249 249  
250 250  
194 +(% style="color:blue" %)**4. Send Uplink message**
251 251  
252 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
253 -(% style="color:blue" %)**5. Check update process**
196 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
254 254  
198 +example: AT+SENDB=01,02,8,05820802581ea0a5
255 255  
256 -[[image:image-20220602104948-14.png]]
257 257  
201 +[[image:image-20220602160339-6.png||height="517" width="600"]]
258 258  
259 259  
260 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
261 -(% style="color:blue" %)**The following picture shows that the burning is successful**
262 262  
263 -[[image:image-20220602105251-15.png]]
205 +Check to see if TTN received the message
264 264  
207 +[[image:image-20220602160627-7.png||height="369" width="800"]]
265 265  
266 266  
267 -= 3.  LA66 USB LoRaWAN Adapter =
268 268  
211 +== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
269 269  
270 -== 3.1  Overview ==
271 271  
272 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
214 +=== 1.8.1  Hardware and Software Connection ===
273 273  
274 274  
275 -== 3.2  Features ==
276 276  
277 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
278 -* Ultra-long RF range
279 -* Support LoRaWAN v1.0.4 protocol
280 -* Support peer-to-peer protocol
281 -* TCXO crystal to ensure RF performance on low temperature
282 -* Spring RF antenna
283 -* Available in different frequency LoRaWAN frequency bands.
284 -* World-wide unique OTAA keys.
285 -* AT Command via UART-TTL interface
286 -* Firmware upgradable via UART interface
218 +==== (% style="color:blue" %)**Overview：**(%%) ====
287 287  
288 288  
221 +(((
222 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
289 289  
290 -== 3.3  Specification ==
224 +* Send real-time location information of mobile phone to LoRaWAN network.
225 +* Check LoRaWAN network signal strengh.
226 +* Manually send messages to LoRaWAN network.
227 +)))
291 291  
292 -* CPU: 32-bit 48 MHz
293 -* Flash: 256KB
294 -* RAM: 64KB
295 -* Input Power Range: 5v
296 -* Frequency Range: 150 MHz ~~ 960 MHz
297 -* Maximum Power +22 dBm constant RF output
298 -* High sensitivity: -148 dBm
299 -* Temperature:
300 -** Storage: -55 ~~ +125℃
301 -** Operating: -40 ~~ +85℃
302 -* Humidity:
303 -** Storage: 5 ~~ 95% (Non-Condensing)
304 -** Operating: 10 ~~ 95% (Non-Condensing)
305 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
306 -* LoRa Rx current: <9 mA
307 307  
308 308  
309 309  
310 -== 3.4  Pin Mapping & LED ==
232 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
311 311  
234 +A USB to Type-C adapter is needed to connect to a Mobile phone.
312 312  
236 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
313 313  
314 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
238 +[[image:image-20220813174353-2.png||height="360" width="313"]]
315 315  
316 316  
317 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
318 318  
242 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
319 319  
320 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
244 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
321 321  
246 +[[image:image-20220813173738-1.png]]
322 322  
323 -[[image:image-20220602171217-1.png||height="538" width="800"]]
324 324  
325 325  
326 -Open the serial port tool
250 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
327 327  
328 -[[image:image-20220602161617-8.png]]
252 +Function and page introduction
329 329  
330 -[[image:image-20220602161718-9.png||height="457" width="800"]]
254 +[[image:image-20220723113448-7.png||height="995" width="450"]]
331 331  
256 +**Block Explain:**
332 332  
258 +1.  Display LA66 USB LoRaWAN Module connection status
333 333  
334 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
260 +2.  Check and reconnect
335 335  
336 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
262 +3.  Turn send timestamps on or off
337 337  
264 +4.  Display LoRaWan connection status
338 338  
339 -[[image:image-20220602161935-10.png||height="498" width="800"]]
266 +5.  Check LoRaWan connection status
340 340  
268 +6.  The RSSI value of the node when the ACK is received
341 341  
270 +7.  Node's Signal Strength Icon
342 342  
343 -(% style="color:blue" %)**3. See Uplink Command**
272 +8.  Configure Location Uplink Interval
344 344  
345 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
274 +9.  AT command input box
346 346  
347 -example: AT+SENDB=01,02,8,05820802581ea0a5
276 +10.  Send Button:  Send input box info to LA66 USB Adapter
348 348  
349 -[[image:image-20220602162157-11.png||height="497" width="800"]]
278 +11.  Output Log from LA66 USB adapter
350 350  
280 +12.  clear log button
351 351  
282 +13.  exit button
352 352  
353 -(% style="color:blue" %)**4. Check to see if TTN received the message**
354 354  
355 -[[image:image-20220602162331-12.png||height="420" width="800"]]
285 +LA66 USB LoRaWAN Module not connected
356 356  
287 +[[image:image-20220723110520-5.png||height="677" width="508"]]
357 357  
358 358  
359 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
360 360  
291 +Connect LA66 USB LoRaWAN Module
361 361  
362 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
293 +[[image:image-20220723110626-6.png||height="681" width="511"]]
363 363  
364 364  
365 -(% style="color:red" %)**Preconditions:**
366 366  
367 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
297 +=== 1.8.2 Send data to TTNv3 and plot location info in Node-Red ===
368 368  
369 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
370 370  
300 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
371 371  
302 +[[image:image-20220723134549-8.png]]
372 372  
373 -(% style="color:blue" %)**Steps for usage:**
374 374  
375 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
376 376  
377 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
306 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
378 378  
379 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
308 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
380 380  
310 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
381 381  
312 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
382 382  
383 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
384 384  
315 +Example output in NodeRed is as below:
385 385  
386 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
317 +[[image:image-20220723144339-1.png]]
387 387  
388 388  
389 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
390 390  
391 -[[image:image-20220602171233-2.png||height="538" width="800"]]
321 +== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
392 392  
393 393  
324 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
394 394  
395 -(% style="color:blue" %)**2. Install Minicom in RPi.**
326 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
396 396  
397 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
328 +[[image:image-20220723150132-2.png]]
398 398  
399 - (% style="background-color:yellow" %)**apt update**
400 400  
401 - (% style="background-color:yellow" %)**apt install minicom**
402 402  
332 += 2.  FAQ =
403 403  
404 -Use minicom to connect to the RPI's terminal
405 405  
406 -[[image:image-20220602153146-3.png||height="439" width="500"]]
335 +== 2.1  How to Compile Source Code for LA66? ==
407 407  
408 408  
338 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
409 409  
410 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
411 411  
412 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
413 413  
342 += 3.  Order Info =
414 414  
415 -[[image:image-20220602154928-5.png||height="436" width="500"]]
416 416  
345 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
417 417  
418 418  
419 -(% style="color:blue" %)**4. Send Uplink message**
420 -
421 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
422 -
423 -example: AT+SENDB=01,02,8,05820802581ea0a5
424 -
425 -
426 -[[image:image-20220602160339-6.png||height="517" width="600"]]
427 -
428 -
429 -
430 -Check to see if TTN received the message
431 -
432 -[[image:image-20220602160627-7.png||height="369" width="800"]]
433 -
434 -
435 -
436 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
437 -
438 -
439 -
440 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
441 -
442 -
443 -
444 -
445 -= 4.  Order Info =
446 -
447 -
448 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
449 -
450 -
451 451  (% style="color:blue" %)**XXX**(%%): The default frequency band
452 452  
453 453  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -462,8 +462,7 @@
462 462  
463 463  
464 464  
465 -= 5.  Reference =
362 += 4.  Reference =
466 466  
467 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
468 468  
469 -
365 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0