Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 87.14 >
edited by Xiaoling
on 2022/07/13 10:06
To version < 149.3 >
edited by Xiaoling
on 2022/08/17 09:50
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Content
... ... @@ -6,113 +6,62 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
14 14  
15 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
14 +== 1.1  Overview ==
16 16  
17 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
18 18  
19 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
17 +[[image:image-20220715001142-3.png||height="145" width="220"]]
20 20  
21 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
22 22  
23 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
20 +(((
21 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 +)))
24 24  
24 +(((
25 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 +)))
25 25  
26 -== 1.2  Features ==
28 +(((
29 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 +)))
27 27  
28 -* Support LoRaWAN v1.0.4 protocol
29 -* Support peer-to-peer protocol
30 -* TCXO crystal to ensure RF performance on low temperature
31 -* SMD Antenna pad and i-pex antenna connector
32 -* Available in different frequency LoRaWAN frequency bands.
33 -* World-wide unique OTAA keys.
34 -* AT Command via UART-TTL interface
35 -* Firmware upgradable via UART interface
36 -* Ultra-long RF range
32 +(((
33 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 +)))
37 37  
36 +(((
37 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 +)))
38 38  
39 39  
40 -== 1.3  Specification ==
41 41  
42 -* CPU: 32-bit 48 MHz
43 -* Flash: 256KB
44 -* RAM: 64KB
45 -* Input Power Range: 1.8v ~~ 3.7v
46 -* Power Consumption: < 4uA.
47 -* Frequency Range: 150 MHz ~~ 960 MHz
48 -* Maximum Power +22 dBm constant RF output
49 -* High sensitivity: -148 dBm
50 -* Temperature:
51 -** Storage: -55 ~~ +125℃
52 -** Operating: -40 ~~ +85℃
53 -* Humidity:
54 -** Storage: 5 ~~ 95% (Non-Condensing)
55 -** Operating: 10 ~~ 95% (Non-Condensing)
56 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
57 -* LoRa Rx current: <9 mA
58 -* I/O Voltage: 3.3v
42 +== 1.2  Features ==
59 59  
60 60  
61 -
62 -== 1.4  AT Command ==
63 -
64 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
65 -
66 -
67 -== 1.5  Dimension ==
68 -
69 -[[image:image-20220517072526-1.png]]
70 -
71 -
72 -
73 -== 1.6  Pin Mapping ==
74 -
75 -
76 -[[image:image-20220523101537-1.png]]
77 -
78 -
79 -
80 -== 1.7  Land Pattern ==
81 -
82 -[[image:image-20220517072821-2.png]]
83 -
84 -
85 -
86 -= 2.  LA66 LoRaWAN Shield =
87 -
88 -
89 -== 2.1  Overview ==
90 -
91 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
92 -
93 -
94 -== 2.2  Features ==
95 -
96 -* Arduino Shield base on LA66 LoRaWAN module
45 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 +* Ultra-long RF range
97 97  * Support LoRaWAN v1.0.4 protocol
98 98  * Support peer-to-peer protocol
99 99  * TCXO crystal to ensure RF performance on low temperature
100 -* SMA connector
50 +* Spring RF antenna
101 101  * Available in different frequency LoRaWAN frequency bands.
102 102  * World-wide unique OTAA keys.
103 103  * AT Command via UART-TTL interface
104 104  * Firmware upgradable via UART interface
105 -* Ultra-long RF range
55 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
106 106  
107 107  
58 +== 1.3  Specification ==
108 108  
109 -== 2.3  Specification ==
110 110  
111 111  * CPU: 32-bit 48 MHz
112 112  * Flash: 256KB
113 113  * RAM: 64KB
114 -* Input Power Range: 1.8v ~~ 3.7v
115 -* Power Consumption: < 4uA.
64 +* Input Power Range: 5v
116 116  * Frequency Range: 150 MHz ~~ 960 MHz
117 117  * Maximum Power +22 dBm constant RF output
118 118  * High sensitivity: -148 dBm
... ... @@ -124,320 +124,278 @@
124 124  ** Operating: 10 ~~ 95% (Non-Condensing)
125 125  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
126 126  * LoRa Rx current: <9 mA
127 -* I/O Voltage: 3.3v
128 128  
129 129  
78 +== 1.4  Pin Mapping & LED ==
130 130  
131 -== 2.4  Pin Mapping & LED ==
80 +[[image:image-20220813183239-3.png||height="526" width="662"]]
132 132  
133 133  
134 134  
135 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
84 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
136 136  
137 137  
87 +(((
88 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
89 +)))
138 138  
139 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
140 140  
92 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
141 141  
142 142  
143 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
95 +[[image:image-20220723100027-1.png]]
144 144  
145 145  
98 +Open the serial port tool
146 146  
147 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
100 +[[image:image-20220602161617-8.png]]
148 148  
102 +[[image:image-20220602161718-9.png||height="457" width="800"]]
149 149  
150 -=== 2.8.1  Items needed for update ===
151 151  
152 -1. LA66 LoRaWAN Shield
153 -1. Arduino
154 -1. USB TO TTL Adapter
155 155  
106 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
156 156  
108 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
157 157  
158 158  
159 -[[image:image-20220602100052-2.png||height="385" width="600"]]
111 +[[image:image-20220602161935-10.png||height="498" width="800"]]
160 160  
161 161  
162 -=== 2.8.2  Connection ===
163 163  
115 +(% style="color:blue" %)**3. See Uplink Command**
164 164  
165 -[[image:image-20220602101311-3.png||height="276" width="600"]]
117 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
166 166  
119 +example: AT+SENDB=01,02,8,05820802581ea0a5
167 167  
168 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
121 +[[image:image-20220602162157-11.png||height="497" width="800"]]
169 169  
170 -(% style="background-color:yellow" %)**GND  <-> GND
171 -TXD  <->  TXD
172 -RXD  <->  RXD**
173 173  
174 174  
175 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
125 +(% style="color:blue" %)**4. Check to see if TTN received the message**
176 176  
177 -Connect USB TTL Adapter to PC after connecting the wires
178 178  
179 179  
180 -[[image:image-20220602102240-4.png||height="304" width="600"]]
129 +[[image:image-20220817093644-1.png]]
181 181  
182 182  
183 -=== 2.8.3  Upgrade steps ===
184 184  
133 +== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
185 185  
186 -==== 1.  Switch SW1 to put in ISP position ====
187 187  
136 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
188 188  
189 -[[image:image-20220602102824-5.png||height="306" width="600"]]
138 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
190 190  
140 +(% style="color:red" %)**Preconditions:**
191 191  
142 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
192 192  
193 -==== 2.  Press the RST switch once ====
144 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
194 194  
195 195  
196 -[[image:image-20220602104701-12.png||height="285" width="600"]]
197 197  
148 +(% style="color:blue" %)**Steps for usage:**
198 198  
150 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
199 199  
200 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
152 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
201 201  
154 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
202 202  
203 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
204 204  
205 205  
206 -[[image:image-20220602103227-6.png]]
158 +== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
207 207  
208 208  
209 -[[image:image-20220602103357-7.png]]
161 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
210 210  
211 211  
164 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
212 212  
213 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
214 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
166 +[[image:image-20220723100439-2.png]]
215 215  
216 216  
217 -[[image:image-20220602103844-8.png]]
218 218  
170 +(% style="color:blue" %)**2. Install Minicom in RPi.**
219 219  
172 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
220 220  
221 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
222 -(% style="color:blue" %)**3. Select the bin file to burn**
174 + (% style="background-color:yellow" %)**apt update**
223 223  
176 + (% style="background-color:yellow" %)**apt install minicom**
224 224  
225 -[[image:image-20220602104144-9.png]]
226 226  
179 +Use minicom to connect to the RPI's terminal
227 227  
228 -[[image:image-20220602104251-10.png]]
181 +[[image:image-20220602153146-3.png||height="439" width="500"]]
229 229  
230 230  
231 -[[image:image-20220602104402-11.png]]
232 232  
185 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
233 233  
187 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
234 234  
235 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
236 -(% style="color:blue" %)**4. Click to start the download**
237 237  
238 -[[image:image-20220602104923-13.png]]
190 +[[image:image-20220602154928-5.png||height="436" width="500"]]
239 239  
240 240  
241 241  
242 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
243 -(% style="color:blue" %)**5. Check update process**
194 +(% style="color:blue" %)**4. Send Uplink message**
244 244  
196 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
245 245  
246 -[[image:image-20220602104948-14.png]]
198 +example: AT+SENDB=01,02,8,05820802581ea0a5
247 247  
248 248  
201 +[[image:image-20220602160339-6.png||height="517" width="600"]]
249 249  
250 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
251 -(% style="color:blue" %)**The following picture shows that the burning is successful**
252 252  
253 -[[image:image-20220602105251-15.png]]
254 254  
205 +Check to see if TTN received the message
255 255  
207 +[[image:image-20220602160627-7.png||height="369" width="800"]]
256 256  
257 -= 3.  LA66 USB LoRaWAN Adapter =
258 258  
259 259  
260 -== 3.1  Overview ==
211 +== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
261 261  
262 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
263 263  
214 +=== 1.8.1  Hardware and Software Connection ===
264 264  
265 -== 3.2  Features ==
266 266  
267 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
268 -* Ultra-long RF range
269 -* Support LoRaWAN v1.0.4 protocol
270 -* Support peer-to-peer protocol
271 -* TCXO crystal to ensure RF performance on low temperature
272 -* Spring RF antenna
273 -* Available in different frequency LoRaWAN frequency bands.
274 -* World-wide unique OTAA keys.
275 -* AT Command via UART-TTL interface
276 -* Firmware upgradable via UART interface
277 277  
218 +==== (% style="color:blue" %)**Overview：**(%%) ====
278 278  
279 279  
280 -== 3.3  Specification ==
221 +(((
222 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
281 281  
282 -* CPU: 32-bit 48 MHz
283 -* Flash: 256KB
284 -* RAM: 64KB
285 -* Input Power Range: 5v
286 -* Frequency Range: 150 MHz ~~ 960 MHz
287 -* Maximum Power +22 dBm constant RF output
288 -* High sensitivity: -148 dBm
289 -* Temperature:
290 -** Storage: -55 ~~ +125℃
291 -** Operating: -40 ~~ +85℃
292 -* Humidity:
293 -** Storage: 5 ~~ 95% (Non-Condensing)
294 -** Operating: 10 ~~ 95% (Non-Condensing)
295 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
296 -* LoRa Rx current: <9 mA
224 +* Send real-time location information of mobile phone to LoRaWAN network.
225 +* Check LoRaWAN network signal strengh.
226 +* Manually send messages to LoRaWAN network.
227 +)))
297 297  
298 298  
299 299  
300 -== 3.4  Pin Mapping & LED ==
301 301  
232 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
302 302  
234 +A USB to Type-C adapter is needed to connect to a Mobile phone.
303 303  
304 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
236 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
305 305  
238 +[[image:image-20220813174353-2.png||height="360" width="313"]]
306 306  
307 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
308 308  
309 309  
310 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
242 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
311 311  
244 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
312 312  
313 -[[image:image-20220602171217-1.png||height="538" width="800"]]
246 +[[image:image-20220813173738-1.png]]
314 314  
315 315  
316 -Open the serial port tool
317 317  
318 -[[image:image-20220602161617-8.png]]
250 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
319 319  
320 -[[image:image-20220602161718-9.png||height="457" width="800"]]
252 +Function and page introduction
321 321  
254 +[[image:image-20220723113448-7.png||height="995" width="450"]]
322 322  
256 +**Block Explain:**
323 323  
324 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
258 +1.  Display LA66 USB LoRaWAN Module connection status
325 325  
326 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
260 +2.  Check and reconnect
327 327  
262 +3.  Turn send timestamps on or off
328 328  
329 -[[image:image-20220602161935-10.png||height="498" width="800"]]
264 +4.  Display LoRaWan connection status
330 330  
266 +5.  Check LoRaWan connection status
331 331  
268 +6.  The RSSI value of the node when the ACK is received
332 332  
333 -(% style="color:blue" %)**3. See Uplink Command**
270 +7.  Node's Signal Strength Icon
334 334  
335 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
272 +8.  Configure Location Uplink Interval
336 336  
337 -example: AT+SENDB=01,02,8,05820802581ea0a5
274 +9.  AT command input box
338 338  
339 -[[image:image-20220602162157-11.png||height="497" width="800"]]
276 +10.  Send Button:  Send input box info to LA66 USB Adapter
340 340  
278 +11.  Output Log from LA66 USB adapter
341 341  
280 +12.  clear log button
342 342  
343 -(% style="color:blue" %)**4. Check to see if TTN received the message**
282 +13.  exit button
344 344  
345 -[[image:image-20220602162331-12.png||height="420" width="800"]]
346 346  
285 +LA66 USB LoRaWAN Module not connected
347 347  
287 +[[image:image-20220723110520-5.png||height="677" width="508"]]
348 348  
349 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
350 350  
351 351  
352 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
291 +Connect LA66 USB LoRaWAN Module
353 353  
293 +[[image:image-20220723110626-6.png||height="681" width="511"]]
354 354  
355 -(% style="color:red" %)**Preconditions:**
356 356  
357 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
358 358  
359 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
297 +=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
360 360  
361 361  
300 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
362 362  
363 -(% style="color:blue" %)**Steps for usage:**
302 +[[image:image-20220723134549-8.png]]
364 364  
365 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
366 366  
367 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
368 368  
369 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
306 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
370 370  
308 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
371 371  
310 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
372 372  
373 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
312 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
374 374  
375 375  
376 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
315 +Example output in NodeRed is as below:
377 377  
317 +[[image:image-20220723144339-1.png]]
378 378  
379 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
380 380  
381 -[[image:image-20220602171233-2.png||height="538" width="800"]]
382 382  
321 +== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
383 383  
384 384  
385 -(% style="color:blue" %)**2. Install Minicom in RPi.**
324 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
386 386  
387 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
326 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
388 388  
389 - (% style="background-color:yellow" %)**apt update**
328 +[[image:image-20220723150132-2.png]]
390 390  
391 - (% style="background-color:yellow" %)**apt install minicom**
392 392  
393 393  
394 -Use minicom to connect to the RPI's terminal
332 += 2.  FAQ =
395 395  
396 -[[image:image-20220602153146-3.png||height="439" width="500"]]
397 397  
335 +== 2.1  How to Compile Source Code for LA66? ==
398 398  
399 399  
400 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
338 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
401 401  
402 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
403 403  
404 404  
405 -[[image:image-20220602154928-5.png||height="436" width="500"]]
342 += 3.  Order Info =
406 406  
407 407  
345 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
408 408  
409 -(% style="color:blue" %)**4. Send Uplink message**
410 410  
411 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
412 -
413 -example: AT+SENDB=01,02,8,05820802581ea0a5
414 -
415 -
416 -[[image:image-20220602160339-6.png||height="517" width="600"]]
417 -
418 -
419 -
420 -Check to see if TTN received the message
421 -
422 -[[image:image-20220602160627-7.png||height="369" width="800"]]
423 -
424 -
425 -
426 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
427 -
428 -
429 -
430 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
431 -
432 -
433 -
434 -
435 -= 4.  Order Info =
436 -
437 -
438 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
439 -
440 -
441 441  (% style="color:blue" %)**XXX**(%%): The default frequency band
442 442  
443 443  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -452,8 +452,9 @@
452 452  
453 453  
454 454  
455 -= 5.  Reference =
456 456  
457 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
458 458  
459 -
364 += 4.  Reference =
365 +
366 +
367 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0