Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 87.13 >
edited by Xiaoling
on 2022/07/13 10:05
To version < 154.1 >
edited by Bei Jinggeng
on 2022/09/09 15:19
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Bei
Content
... ... @@ -6,43 +6,61 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
14 14  
15 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
14 +== 1.1  Overview ==
16 16  
17 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
18 18  
17 +[[image:image-20220715001142-3.png||height="145" width="220"]]
18 +
19 +
20 +(((
21 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 +)))
27 +
28 +(((
19 19  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 +)))
20 20  
32 +(((
21 21  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 +)))
22 22  
36 +(((
23 23  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 +)))
24 24  
25 25  
41 +
26 26  == 1.2  Features ==
27 27  
44 +
45 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 +* Ultra-long RF range
28 28  * Support LoRaWAN v1.0.4 protocol
29 29  * Support peer-to-peer protocol
30 30  * TCXO crystal to ensure RF performance on low temperature
31 -* SMD Antenna pad and i-pex antenna connector
50 +* Spring RF antenna
32 32  * Available in different frequency LoRaWAN frequency bands.
33 33  * World-wide unique OTAA keys.
34 34  * AT Command via UART-TTL interface
35 35  * Firmware upgradable via UART interface
36 -* Ultra-long RF range
55 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
37 37  
38 -
39 39  == 1.3  Specification ==
40 40  
59 +
41 41  * CPU: 32-bit 48 MHz
42 42  * Flash: 256KB
43 43  * RAM: 64KB
44 -* Input Power Range: 1.8v ~~ 3.7v
45 -* Power Consumption: < 4uA.
63 +* Input Power Range: 5v
46 46  * Frequency Range: 150 MHz ~~ 960 MHz
47 47  * Maximum Power +22 dBm constant RF output
48 48  * High sensitivity: -148 dBm
... ... @@ -54,381 +54,335 @@
54 54  ** Operating: 10 ~~ 95% (Non-Condensing)
55 55  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
56 56  * LoRa Rx current: <9 mA
57 -* I/O Voltage: 3.3v
58 58  
76 +== 1.4  Pin Mapping & LED ==
59 59  
60 -== 1.4  AT Command ==
61 61  
62 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
79 +[[image:image-20220813183239-3.png||height="526" width="662"]]
63 63  
64 64  
65 -== 1.5  Dimension ==
66 66  
67 -[[image:image-20220517072526-1.png]]
83 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
68 68  
69 69  
86 +(((
87 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
88 +)))
70 70  
71 -== 1.6  Pin Mapping ==
72 72  
91 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
73 73  
74 -[[image:image-20220523101537-1.png]]
75 75  
94 +[[image:image-20220723100027-1.png]]
76 76  
77 77  
78 -== 1.7  Land Pattern ==
97 +Open the serial port tool
79 79  
80 -[[image:image-20220517072821-2.png]]
99 +[[image:image-20220602161617-8.png]]
81 81  
101 +[[image:image-20220602161718-9.png||height="457" width="800"]]
82 82  
83 83  
84 -= 2.  LA66 LoRaWAN Shield =
85 85  
105 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
86 86  
87 -== 2.1  Overview ==
88 88  
89 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
108 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
90 90  
91 91  
92 -== 2.2  Features ==
111 +[[image:image-20220602161935-10.png||height="498" width="800"]]
93 93  
94 -* Arduino Shield base on LA66 LoRaWAN module
95 -* Support LoRaWAN v1.0.4 protocol
96 -* Support peer-to-peer protocol
97 -* TCXO crystal to ensure RF performance on low temperature
98 -* SMA connector
99 -* Available in different frequency LoRaWAN frequency bands.
100 -* World-wide unique OTAA keys.
101 -* AT Command via UART-TTL interface
102 -* Firmware upgradable via UART interface
103 -* Ultra-long RF range
104 104  
105 105  
106 -== 2.3  Specification ==
115 +(% style="color:blue" %)**3. See Uplink Command**
107 107  
108 -* CPU: 32-bit 48 MHz
109 -* Flash: 256KB
110 -* RAM: 64KB
111 -* Input Power Range: 1.8v ~~ 3.7v
112 -* Power Consumption: < 4uA.
113 -* Frequency Range: 150 MHz ~~ 960 MHz
114 -* Maximum Power +22 dBm constant RF output
115 -* High sensitivity: -148 dBm
116 -* Temperature:
117 -** Storage: -55 ~~ +125℃
118 -** Operating: -40 ~~ +85℃
119 -* Humidity:
120 -** Storage: 5 ~~ 95% (Non-Condensing)
121 -** Operating: 10 ~~ 95% (Non-Condensing)
122 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
123 -* LoRa Rx current: <9 mA
124 -* I/O Voltage: 3.3v
125 125  
118 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
126 126  
127 -== 2.4  Pin Mapping & LED ==
120 +example: AT+SENDB=01,02,8,05820802581ea0a5
128 128  
122 +[[image:image-20220602162157-11.png||height="497" width="800"]]
129 129  
130 130  
131 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
132 132  
126 +(% style="color:blue" %)**4. Check to see if TTN received the message**
133 133  
134 134  
135 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
129 +[[image:image-20220817093644-1.png]]
136 136  
137 137  
138 138  
139 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
133 +== 1.6  Example: How to join helium ==
140 140  
135 +(% style="color:blue" %)**1. Create a new device.**
141 141  
137 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
142 142  
143 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
144 144  
140 +(% style="color:blue" %)**2. Save the device after filling in the necessary information.**
145 145  
146 -=== 2.8.1  Items needed for update ===
142 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
147 147  
148 -1. LA66 LoRaWAN Shield
149 -1. Arduino
150 -1. USB TO TTL Adapter
151 151  
152 -[[image:image-20220602100052-2.png||height="385" width="600"]]
145 +(% style="color:blue" %)**3.  Use AT commands.**
153 153  
147 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
154 154  
155 -=== 2.8.2  Connection ===
156 156  
150 +(% style="color:blue" %)**4..  Use the serial port tool**
157 157  
158 -[[image:image-20220602101311-3.png||height="276" width="600"]]
152 +[[image:image-20220909151517-2.png||height="543" width="708"]]
159 159  
160 160  
161 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
155 +(% style="color:blue" %)**5.Use command AT+CFG to get device configuration**
162 162  
163 -(% style="background-color:yellow" %)**GND  <-> GND
164 -TXD  <->  TXD
165 -RXD  <->  RXD**
157 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
166 166  
167 167  
168 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
160 +(% style="color:blue" %)**6.  Network successfully.**
169 169  
170 -Connect USB TTL Adapter to PC after connecting the wires
162 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
171 171  
172 172  
173 -[[image:image-20220602102240-4.png||height="304" width="600"]]
165 +(% style="color:blue" %)**7.  Send uplink using command**
174 174  
167 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170659-5.png?rev=1.1||alt="image-20220907170659-5.png"]]
175 175  
176 -=== 2.8.3  Upgrade steps ===
169 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
177 177  
178 178  
179 -==== 1.  Switch SW1 to put in ISP position ====
172 +== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
180 180  
181 181  
182 -[[image:image-20220602102824-5.png||height="306" width="600"]]
175 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
183 183  
177 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
184 184  
185 185  
186 -==== 2.  Press the RST switch once ====
180 +(% style="color:red" %)**Preconditions:**
187 187  
182 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
188 188  
189 -[[image:image-20220602104701-12.png||height="285" width="600"]]
184 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
190 190  
191 191  
192 192  
193 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
188 +(% style="color:blue" %)**Steps for usage:**
194 194  
190 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
195 195  
196 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
192 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
197 197  
198 198  
199 -[[image:image-20220602103227-6.png]]
195 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
200 200  
201 201  
202 -[[image:image-20220602103357-7.png]]
203 203  
199 +== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
204 204  
205 205  
206 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
207 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
202 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
208 208  
209 209  
210 -[[image:image-20220602103844-8.png]]
205 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
211 211  
212 212  
208 +[[image:image-20220723100439-2.png]]
213 213  
214 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
215 -(% style="color:blue" %)**3. Select the bin file to burn**
216 216  
217 217  
218 -[[image:image-20220602104144-9.png]]
212 +(% style="color:blue" %)**2. Install Minicom in RPi.**
219 219  
220 220  
221 -[[image:image-20220602104251-10.png]]
215 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
222 222  
217 + (% style="background-color:yellow" %)**apt update**
223 223  
224 -[[image:image-20220602104402-11.png]]
219 + (% style="background-color:yellow" %)**apt install minicom**
225 225  
226 226  
222 +Use minicom to connect to the RPI's terminal
227 227  
228 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
229 -(% style="color:blue" %)**4. Click to start the download**
224 +[[image:image-20220602153146-3.png||height="439" width="500"]]
230 230  
231 -[[image:image-20220602104923-13.png]]
232 232  
233 233  
228 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
234 234  
235 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
236 -(% style="color:blue" %)**5. Check update process**
237 237  
231 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
238 238  
239 -[[image:image-20220602104948-14.png]]
240 240  
234 +[[image:image-20220602154928-5.png||height="436" width="500"]]
241 241  
242 242  
243 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
244 -(% style="color:blue" %)**The following picture shows that the burning is successful**
245 245  
246 -[[image:image-20220602105251-15.png]]
238 +(% style="color:blue" %)**4. Send Uplink message**
247 247  
248 248  
241 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
249 249  
250 -= 3.  LA66 USB LoRaWAN Adapter =
243 +example: AT+SENDB=01,02,8,05820802581ea0a5
251 251  
252 252  
253 -== 3.1  Overview ==
246 +[[image:image-20220602160339-6.png||height="517" width="600"]]
254 254  
255 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
256 256  
257 257  
258 -== 3.2  Features ==
250 +Check to see if TTN received the message
259 259  
260 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
261 -* Ultra-long RF range
262 -* Support LoRaWAN v1.0.4 protocol
263 -* Support peer-to-peer protocol
264 -* TCXO crystal to ensure RF performance on low temperature
265 -* Spring RF antenna
266 -* Available in different frequency LoRaWAN frequency bands.
267 -* World-wide unique OTAA keys.
268 -* AT Command via UART-TTL interface
269 -* Firmware upgradable via UART interface
252 +[[image:image-20220602160627-7.png||height="369" width="800"]]
270 270  
271 271  
272 -== 3.3  Specification ==
273 273  
274 -* CPU: 32-bit 48 MHz
275 -* Flash: 256KB
276 -* RAM: 64KB
277 -* Input Power Range: 5v
278 -* Frequency Range: 150 MHz ~~ 960 MHz
279 -* Maximum Power +22 dBm constant RF output
280 -* High sensitivity: -148 dBm
281 -* Temperature:
282 -** Storage: -55 ~~ +125℃
283 -** Operating: -40 ~~ +85℃
284 -* Humidity:
285 -** Storage: 5 ~~ 95% (Non-Condensing)
286 -** Operating: 10 ~~ 95% (Non-Condensing)
287 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
288 -* LoRa Rx current: <9 mA
256 +== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
289 289  
290 290  
291 -== 3.4  Pin Mapping & LED ==
259 +=== 1.8.1  Hardware and Software Connection ===
292 292  
293 293  
294 294  
295 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
263 +==== (% style="color:blue" %)**Overview：**(%%) ====
296 296  
297 297  
298 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
266 +(((
267 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
299 299  
269 +* Send real-time location information of mobile phone to LoRaWAN network.
270 +* Check LoRaWAN network signal strengh.
271 +* Manually send messages to LoRaWAN network.
272 +)))
300 300  
301 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
302 302  
303 303  
304 -[[image:image-20220602171217-1.png||height="538" width="800"]]
305 305  
277 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
306 306  
307 -Open the serial port tool
308 308  
309 -[[image:image-20220602161617-8.png]]
280 +A USB to Type-C adapter is needed to connect to a Mobile phone.
310 310  
311 -[[image:image-20220602161718-9.png||height="457" width="800"]]
282 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
312 312  
284 +[[image:image-20220813174353-2.png||height="360" width="313"]]
313 313  
314 314  
315 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
316 316  
317 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
288 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
318 318  
319 319  
320 -[[image:image-20220602161935-10.png||height="498" width="800"]]
291 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
321 321  
293 +[[image:image-20220813173738-1.png]]
322 322  
323 323  
324 -(% style="color:blue" %)**3. See Uplink Command**
325 325  
326 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
297 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
327 327  
328 -example: AT+SENDB=01,02,8,05820802581ea0a5
329 329  
330 -[[image:image-20220602162157-11.png||height="497" width="800"]]
300 +Function and page introduction
331 331  
332 332  
303 +[[image:image-20220723113448-7.png||height="995" width="450"]]
333 333  
334 -(% style="color:blue" %)**4. Check to see if TTN received the message**
305 +**Block Explain:**
335 335  
336 -[[image:image-20220602162331-12.png||height="420" width="800"]]
307 +1.  Display LA66 USB LoRaWAN Module connection status
337 337  
309 +2.  Check and reconnect
338 338  
311 +3.  Turn send timestamps on or off
339 339  
340 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
313 +4.  Display LoRaWan connection status
341 341  
315 +5.  Check LoRaWan connection status
342 342  
343 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
317 +6.  The RSSI value of the node when the ACK is received
344 344  
319 +7.  Node's Signal Strength Icon
345 345  
346 -(% style="color:red" %)**Preconditions:**
321 +8.  Configure Location Uplink Interval
347 347  
348 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
323 +9.  AT command input box
349 349  
350 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
325 +10.  Send Button:  Send input box info to LA66 USB Adapter
351 351  
327 +11.  Output Log from LA66 USB adapter
352 352  
329 +12.  clear log button
353 353  
354 -(% style="color:blue" %)**Steps for usage:**
331 +13.  exit button
355 355  
356 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
357 357  
358 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
359 359  
360 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
335 +LA66 USB LoRaWAN Module not connected
361 361  
362 362  
338 +[[image:image-20220723110520-5.png||height="677" width="508"]]
363 363  
364 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
365 365  
366 366  
367 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
342 +Connect LA66 USB LoRaWAN Module
368 368  
344 +[[image:image-20220723110626-6.png||height="681" width="511"]]
369 369  
370 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
371 371  
372 -[[image:image-20220602171233-2.png||height="538" width="800"]]
373 373  
348 +=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
374 374  
375 375  
376 -(% style="color:blue" %)**2. Install Minicom in RPi.**
351 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
377 377  
378 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
379 379  
380 - (% style="background-color:yellow" %)**apt update**
354 +[[image:image-20220723134549-8.png]]
381 381  
382 - (% style="background-color:yellow" %)**apt install minicom**
383 383  
384 384  
385 -Use minicom to connect to the RPI's terminal
358 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
386 386  
387 -[[image:image-20220602153146-3.png||height="439" width="500"]]
388 388  
361 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
389 389  
363 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
390 390  
391 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
365 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
392 392  
393 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
367 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
394 394  
395 395  
396 -[[image:image-20220602154928-5.png||height="436" width="500"]]
370 +Example output in NodeRed is as below:
397 397  
372 +[[image:image-20220723144339-1.png]]
398 398  
399 399  
400 -(% style="color:blue" %)**4. Send Uplink message**
401 401  
402 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
376 +== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
403 403  
404 -example: AT+SENDB=01,02,8,05820802581ea0a5
405 405  
379 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
406 406  
407 -[[image:image-20220602160339-6.png||height="517" width="600"]]
381 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
408 408  
409 409  
384 +[[image:image-20220723150132-2.png]]
410 410  
411 -Check to see if TTN received the message
412 412  
413 -[[image:image-20220602160627-7.png||height="369" width="800"]]
414 414  
388 += 2.  FAQ =
415 415  
416 416  
417 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
391 +== 2.1  How to Compile Source Code for LA66? ==
418 418  
419 419  
394 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
420 420  
421 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
422 422  
423 423  
398 += 3.  Order Info =
424 424  
425 425  
426 -= 4.  Order Info =
401 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
427 427  
428 428  
429 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
430 -
431 -
432 432  (% style="color:blue" %)**XXX**(%%): The default frequency band
433 433  
434 434  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -441,10 +441,10 @@
441 441  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
442 442  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
443 443  
416 += 4.  Reference =
444 444  
445 445  
446 -= 5.  Reference =
419 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
420 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
447 447  
448 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
449 -
450 450  
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0