Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 87.12 >
edited by Xiaoling
on 2022/07/13 10:04
To version < 150.1 >
edited by Edwin Chen
on 2022/08/30 19:09
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,46 +1,67 @@
1 1  
2 2  
3 +**Table of Contents:**
4 +
3 3  {{toc/}}
4 4  
5 5  
6 6  
7 -= 1.  LA66 LoRaWAN Module =
8 8  
9 9  
10 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
11 11  
12 12  
13 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
14 +== 1.1  Overview ==
14 14  
15 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 16  
17 +[[image:image-20220715001142-3.png||height="145" width="220"]]
18 +
19 +
20 +(((
21 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 +)))
27 +
28 +(((
17 17  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 +)))
18 18  
32 +(((
19 19  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 +)))
20 20  
36 +(((
21 21  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 +)))
22 22  
23 23  
41 +
24 24  == 1.2  Features ==
25 25  
44 +
45 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 +* Ultra-long RF range
26 26  * Support LoRaWAN v1.0.4 protocol
27 27  * Support peer-to-peer protocol
28 28  * TCXO crystal to ensure RF performance on low temperature
29 -* SMD Antenna pad and i-pex antenna connector
50 +* Spring RF antenna
30 30  * Available in different frequency LoRaWAN frequency bands.
31 31  * World-wide unique OTAA keys.
32 32  * AT Command via UART-TTL interface
33 33  * Firmware upgradable via UART interface
34 -* Ultra-long RF range
55 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
35 35  
36 36  
37 37  == 1.3  Specification ==
38 38  
60 +
39 39  * CPU: 32-bit 48 MHz
40 40  * Flash: 256KB
41 41  * RAM: 64KB
42 -* Input Power Range: 1.8v ~~ 3.7v
43 -* Power Consumption: < 4uA.
64 +* Input Power Range: 5v
44 44  * Frequency Range: 150 MHz ~~ 960 MHz
45 45  * Maximum Power +22 dBm constant RF output
46 46  * High sensitivity: -148 dBm
... ... @@ -52,381 +52,295 @@
52 52  ** Operating: 10 ~~ 95% (Non-Condensing)
53 53  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
54 54  * LoRa Rx current: <9 mA
55 -* I/O Voltage: 3.3v
56 56  
57 57  
58 -== 1.4  AT Command ==
78 +== 1.4  Pin Mapping & LED ==
59 59  
60 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
61 61  
81 +[[image:image-20220813183239-3.png||height="526" width="662"]]
62 62  
63 -== 1.5  Dimension ==
64 64  
65 -[[image:image-20220517072526-1.png]]
66 66  
85 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
67 67  
68 68  
69 -== 1.6  Pin Mapping ==
88 +(((
89 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
90 +)))
70 70  
71 71  
72 -[[image:image-20220523101537-1.png]]
93 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
73 73  
74 74  
96 +[[image:image-20220723100027-1.png]]
75 75  
76 -== 1.7  Land Pattern ==
77 77  
78 -[[image:image-20220517072821-2.png]]
99 +Open the serial port tool
79 79  
101 +[[image:image-20220602161617-8.png]]
80 80  
103 +[[image:image-20220602161718-9.png||height="457" width="800"]]
81 81  
82 -= 2.  LA66 LoRaWAN Shield =
83 83  
84 84  
85 -== 2.1  Overview ==
107 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
86 86  
87 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
88 88  
110 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
89 89  
90 -== 2.2  Features ==
91 91  
92 -* Arduino Shield base on LA66 LoRaWAN module
93 -* Support LoRaWAN v1.0.4 protocol
94 -* Support peer-to-peer protocol
95 -* TCXO crystal to ensure RF performance on low temperature
96 -* SMA connector
97 -* Available in different frequency LoRaWAN frequency bands.
98 -* World-wide unique OTAA keys.
99 -* AT Command via UART-TTL interface
100 -* Firmware upgradable via UART interface
101 -* Ultra-long RF range
113 +[[image:image-20220602161935-10.png||height="498" width="800"]]
102 102  
103 103  
104 -== 2.3  Specification ==
105 105  
106 -* CPU: 32-bit 48 MHz
107 -* Flash: 256KB
108 -* RAM: 64KB
109 -* Input Power Range: 1.8v ~~ 3.7v
110 -* Power Consumption: < 4uA.
111 -* Frequency Range: 150 MHz ~~ 960 MHz
112 -* Maximum Power +22 dBm constant RF output
113 -* High sensitivity: -148 dBm
114 -* Temperature:
115 -** Storage: -55 ~~ +125℃
116 -** Operating: -40 ~~ +85℃
117 -* Humidity:
118 -** Storage: 5 ~~ 95% (Non-Condensing)
119 -** Operating: 10 ~~ 95% (Non-Condensing)
120 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
121 -* LoRa Rx current: <9 mA
122 -* I/O Voltage: 3.3v
117 +(% style="color:blue" %)**3. See Uplink Command**
123 123  
124 124  
125 -== 2.4  Pin Mapping & LED ==
120 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
126 126  
122 +example: AT+SENDB=01,02,8,05820802581ea0a5
127 127  
124 +[[image:image-20220602162157-11.png||height="497" width="800"]]
128 128  
129 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
130 130  
131 131  
128 +(% style="color:blue" %)**4. Check to see if TTN received the message**
132 132  
133 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
134 134  
131 +[[image:image-20220817093644-1.png]]
135 135  
136 136  
137 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
138 138  
135 +== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
139 139  
140 140  
141 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
138 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
142 142  
140 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
143 143  
144 -=== 2.8.1  Items needed for update ===
145 145  
146 -1. LA66 LoRaWAN Shield
147 -1. Arduino
148 -1. USB TO TTL Adapter
143 +(% style="color:red" %)**Preconditions:**
149 149  
150 -[[image:image-20220602100052-2.png||height="385" width="600"]]
145 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
151 151  
147 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
152 152  
153 -=== 2.8.2  Connection ===
154 154  
155 155  
156 -[[image:image-20220602101311-3.png||height="276" width="600"]]
151 +(% style="color:blue" %)**Steps for usage:**
157 157  
153 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
158 158  
159 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
155 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
160 160  
161 -(% style="background-color:yellow" %)**GND  <-> GND
162 -TXD  <->  TXD
163 -RXD  <->  RXD**
164 164  
158 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
165 165  
166 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
167 167  
168 -Connect USB TTL Adapter to PC after connecting the wires
169 169  
162 +== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
170 170  
171 -[[image:image-20220602102240-4.png||height="304" width="600"]]
172 172  
165 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
173 173  
174 -=== 2.8.3  Upgrade steps ===
175 175  
168 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
176 176  
177 -==== 1.  Switch SW1 to put in ISP position ====
178 178  
171 +[[image:image-20220723100439-2.png]]
179 179  
180 -[[image:image-20220602102824-5.png||height="306" width="600"]]
181 181  
182 182  
175 +(% style="color:blue" %)**2. Install Minicom in RPi.**
183 183  
184 -==== 2.  Press the RST switch once ====
185 185  
178 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
186 186  
187 -[[image:image-20220602104701-12.png||height="285" width="600"]]
180 + (% style="background-color:yellow" %)**apt update**
188 188  
182 + (% style="background-color:yellow" %)**apt install minicom**
189 189  
190 190  
191 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
185 +Use minicom to connect to the RPI's terminal
192 192  
187 +[[image:image-20220602153146-3.png||height="439" width="500"]]
193 193  
194 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
195 195  
196 196  
197 -[[image:image-20220602103227-6.png]]
191 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
198 198  
199 199  
200 -[[image:image-20220602103357-7.png]]
194 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
201 201  
202 202  
197 +[[image:image-20220602154928-5.png||height="436" width="500"]]
203 203  
204 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
205 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
206 206  
207 207  
208 -[[image:image-20220602103844-8.png]]
201 +(% style="color:blue" %)**4. Send Uplink message**
209 209  
210 210  
204 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
211 211  
212 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
213 -(% style="color:blue" %)**3. Select the bin file to burn**
206 +example: AT+SENDB=01,02,8,05820802581ea0a5
214 214  
215 215  
216 -[[image:image-20220602104144-9.png]]
209 +[[image:image-20220602160339-6.png||height="517" width="600"]]
217 217  
218 218  
219 -[[image:image-20220602104251-10.png]]
220 220  
213 +Check to see if TTN received the message
221 221  
222 -[[image:image-20220602104402-11.png]]
215 +[[image:image-20220602160627-7.png||height="369" width="800"]]
223 223  
224 224  
225 225  
226 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
227 -(% style="color:blue" %)**4. Click to start the download**
219 +== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
228 228  
229 -[[image:image-20220602104923-13.png]]
230 230  
222 +=== 1.8.1  Hardware and Software Connection ===
231 231  
232 232  
233 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
234 -(% style="color:blue" %)**5. Check update process**
235 235  
226 +==== (% style="color:blue" %)**Overview：**(%%) ====
236 236  
237 -[[image:image-20220602104948-14.png]]
238 238  
229 +(((
230 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
239 239  
232 +* Send real-time location information of mobile phone to LoRaWAN network.
233 +* Check LoRaWAN network signal strengh.
234 +* Manually send messages to LoRaWAN network.
235 +)))
240 240  
241 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
242 -(% style="color:blue" %)**The following picture shows that the burning is successful**
243 243  
244 -[[image:image-20220602105251-15.png]]
245 245  
246 246  
240 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
247 247  
248 -= 3.  LA66 USB LoRaWAN Adapter =
249 249  
243 +A USB to Type-C adapter is needed to connect to a Mobile phone.
250 250  
251 -== 3.1  Overview ==
245 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
252 252  
253 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
247 +[[image:image-20220813174353-2.png||height="360" width="313"]]
254 254  
255 255  
256 -== 3.2  Features ==
257 257  
258 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
259 -* Ultra-long RF range
260 -* Support LoRaWAN v1.0.4 protocol
261 -* Support peer-to-peer protocol
262 -* TCXO crystal to ensure RF performance on low temperature
263 -* Spring RF antenna
264 -* Available in different frequency LoRaWAN frequency bands.
265 -* World-wide unique OTAA keys.
266 -* AT Command via UART-TTL interface
267 -* Firmware upgradable via UART interface
251 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
268 268  
269 269  
270 -== 3.3  Specification ==
254 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
271 271  
272 -* CPU: 32-bit 48 MHz
273 -* Flash: 256KB
274 -* RAM: 64KB
275 -* Input Power Range: 5v
276 -* Frequency Range: 150 MHz ~~ 960 MHz
277 -* Maximum Power +22 dBm constant RF output
278 -* High sensitivity: -148 dBm
279 -* Temperature:
280 -** Storage: -55 ~~ +125℃
281 -** Operating: -40 ~~ +85℃
282 -* Humidity:
283 -** Storage: 5 ~~ 95% (Non-Condensing)
284 -** Operating: 10 ~~ 95% (Non-Condensing)
285 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
286 -* LoRa Rx current: <9 mA
256 +[[image:image-20220813173738-1.png]]
287 287  
288 288  
289 -== 3.4  Pin Mapping & LED ==
290 290  
260 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
291 291  
292 292  
293 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
263 +Function and page introduction
294 294  
295 295  
296 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
266 +[[image:image-20220723113448-7.png||height="995" width="450"]]
297 297  
268 +**Block Explain:**
298 298  
299 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
270 +1.  Display LA66 USB LoRaWAN Module connection status
300 300  
272 +2.  Check and reconnect
301 301  
302 -[[image:image-20220602171217-1.png||height="538" width="800"]]
274 +3.  Turn send timestamps on or off
303 303  
276 +4.  Display LoRaWan connection status
304 304  
305 -Open the serial port tool
278 +5.  Check LoRaWan connection status
306 306  
307 -[[image:image-20220602161617-8.png]]
280 +6.  The RSSI value of the node when the ACK is received
308 308  
309 -[[image:image-20220602161718-9.png||height="457" width="800"]]
282 +7.  Node's Signal Strength Icon
310 310  
284 +8.  Configure Location Uplink Interval
311 311  
286 +9.  AT command input box
312 312  
313 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
288 +10.  Send Button:  Send input box info to LA66 USB Adapter
314 314  
315 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
290 +11.  Output Log from LA66 USB adapter
316 316  
292 +12.  clear log button
317 317  
318 -[[image:image-20220602161935-10.png||height="498" width="800"]]
294 +13.  exit button
319 319  
320 320  
321 321  
322 -(% style="color:blue" %)**3. See Uplink Command**
298 +LA66 USB LoRaWAN Module not connected
323 323  
324 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
325 325  
326 -example: AT+SENDB=01,02,8,05820802581ea0a5
301 +[[image:image-20220723110520-5.png||height="677" width="508"]]
327 327  
328 -[[image:image-20220602162157-11.png||height="497" width="800"]]
329 329  
330 330  
305 +Connect LA66 USB LoRaWAN Module
331 331  
332 -(% style="color:blue" %)**4. Check to see if TTN received the message**
307 +[[image:image-20220723110626-6.png||height="681" width="511"]]
333 333  
334 -[[image:image-20220602162331-12.png||height="420" width="800"]]
335 335  
336 336  
311 +=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
337 337  
338 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
339 339  
314 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
340 340  
341 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
342 342  
317 +[[image:image-20220723134549-8.png]]
343 343  
344 -(% style="color:red" %)**Preconditions:**
345 345  
346 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
347 347  
348 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
321 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
349 349  
350 350  
324 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
351 351  
352 -(% style="color:blue" %)**Steps for usage:**
326 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
353 353  
354 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
328 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
355 355  
356 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
357 357  
358 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
331 +Example output in NodeRed is as below:
359 359  
333 +[[image:image-20220723144339-1.png]]
360 360  
361 361  
362 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
363 363  
337 +== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
364 364  
365 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
366 366  
340 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
367 367  
368 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
342 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
369 369  
370 -[[image:image-20220602171233-2.png||height="538" width="800"]]
371 371  
345 +[[image:image-20220723150132-2.png]]
372 372  
373 373  
374 -(% style="color:blue" %)**2. Install Minicom in RPi.**
375 375  
376 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
349 += 2.  FAQ =
377 377  
378 - (% style="background-color:yellow" %)**apt update**
379 379  
380 - (% style="background-color:yellow" %)**apt install minicom**
352 +== 2.1  How to Compile Source Code for LA66? ==
381 381  
382 382  
383 -Use minicom to connect to the RPI's terminal
355 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
384 384  
385 -[[image:image-20220602153146-3.png||height="439" width="500"]]
386 386  
387 387  
359 += 3.  Order Info =
388 388  
389 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
390 390  
391 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
362 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
392 392  
393 393  
394 -[[image:image-20220602154928-5.png||height="436" width="500"]]
395 -
396 -
397 -
398 -(% style="color:blue" %)**4. Send Uplink message**
399 -
400 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
401 -
402 -example: AT+SENDB=01,02,8,05820802581ea0a5
403 -
404 -
405 -[[image:image-20220602160339-6.png||height="517" width="600"]]
406 -
407 -
408 -
409 -Check to see if TTN received the message
410 -
411 -[[image:image-20220602160627-7.png||height="369" width="800"]]
412 -
413 -
414 -
415 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
416 -
417 -
418 -
419 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
420 -
421 -
422 -
423 -
424 -= 4.  Order Info =
425 -
426 -
427 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
428 -
429 -
430 430  (% style="color:blue" %)**XXX**(%%): The default frequency band
431 431  
432 432  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -441,8 +441,10 @@
441 441  
442 442  
443 443  
444 -= 5.  Reference =
379 += 4.  Reference =
445 445  
446 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
447 447  
382 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
383 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
384 +
448 448  
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0