Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 87.11 >
edited by Xiaoling
on 2022/07/13 10:04
To version < 157.1 >
edited by Xiaoling
on 2022/09/12 08:53
>
Change comment: Uploaded new attachment "image-20220912085307-2.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Content
... ... @@ -1,46 +1,66 @@
1 1  
2 2  
3 +**Table of Contents:**
4 +
3 3  {{toc/}}
4 4  
5 5  
6 6  
7 -= 1.  LA66 LoRaWAN Module =
8 8  
9 9  
10 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
11 11  
12 12  
13 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
14 +== 1.1  Overview ==
14 14  
15 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 16  
17 +[[image:image-20220715001142-3.png||height="145" width="220"]]
18 +
19 +
20 +(((
21 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 +)))
27 +
28 +(((
17 17  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 +)))
18 18  
32 +(((
19 19  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 +)))
20 20  
36 +(((
21 21  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 +)))
22 22  
23 23  
41 +
24 24  == 1.2  Features ==
25 25  
44 +
45 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 +* Ultra-long RF range
26 26  * Support LoRaWAN v1.0.4 protocol
27 27  * Support peer-to-peer protocol
28 28  * TCXO crystal to ensure RF performance on low temperature
29 -* SMD Antenna pad and i-pex antenna connector
50 +* Spring RF antenna
30 30  * Available in different frequency LoRaWAN frequency bands.
31 31  * World-wide unique OTAA keys.
32 32  * AT Command via UART-TTL interface
33 33  * Firmware upgradable via UART interface
34 -* Ultra-long RF range
55 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
35 35  
36 -
37 37  == 1.3  Specification ==
38 38  
59 +
39 39  * CPU: 32-bit 48 MHz
40 40  * Flash: 256KB
41 41  * RAM: 64KB
42 -* Input Power Range: 1.8v ~~ 3.7v
43 -* Power Consumption: < 4uA.
63 +* Input Power Range: 5v
44 44  * Frequency Range: 150 MHz ~~ 960 MHz
45 45  * Maximum Power +22 dBm constant RF output
46 46  * High sensitivity: -148 dBm
... ... @@ -52,381 +52,335 @@
52 52  ** Operating: 10 ~~ 95% (Non-Condensing)
53 53  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
54 54  * LoRa Rx current: <9 mA
55 -* I/O Voltage: 3.3v
56 56  
76 +== 1.4  Pin Mapping & LED ==
57 57  
58 -== 1.4  AT Command ==
59 59  
60 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
79 +[[image:image-20220813183239-3.png||height="526" width="662"]]
61 61  
62 62  
63 -== 1.5  Dimension ==
64 64  
65 -[[image:image-20220517072526-1.png]]
83 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
66 66  
67 67  
86 +(((
87 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
88 +)))
68 68  
69 -== 1.6  Pin Mapping ==
70 70  
91 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
71 71  
72 -[[image:image-20220523101537-1.png]]
73 73  
94 +[[image:image-20220723100027-1.png]]
74 74  
75 75  
76 -== 1.7  Land Pattern ==
97 +Open the serial port tool
77 77  
78 -[[image:image-20220517072821-2.png]]
99 +[[image:image-20220602161617-8.png]]
79 79  
101 +[[image:image-20220602161718-9.png||height="457" width="800"]]
80 80  
81 81  
82 -= 2.  LA66 LoRaWAN Shield =
83 83  
105 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
84 84  
85 -== 2.1  Overview ==
86 86  
87 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
108 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
88 88  
89 89  
90 -== 2.2  Features ==
111 +[[image:image-20220602161935-10.png||height="498" width="800"]]
91 91  
92 -* Arduino Shield base on LA66 LoRaWAN module
93 -* Support LoRaWAN v1.0.4 protocol
94 -* Support peer-to-peer protocol
95 -* TCXO crystal to ensure RF performance on low temperature
96 -* SMA connector
97 -* Available in different frequency LoRaWAN frequency bands.
98 -* World-wide unique OTAA keys.
99 -* AT Command via UART-TTL interface
100 -* Firmware upgradable via UART interface
101 -* Ultra-long RF range
102 102  
103 103  
104 -== 2.3  Specification ==
115 +(% style="color:blue" %)**3. See Uplink Command**
105 105  
106 -* CPU: 32-bit 48 MHz
107 -* Flash: 256KB
108 -* RAM: 64KB
109 -* Input Power Range: 1.8v ~~ 3.7v
110 -* Power Consumption: < 4uA.
111 -* Frequency Range: 150 MHz ~~ 960 MHz
112 -* Maximum Power +22 dBm constant RF output
113 -* High sensitivity: -148 dBm
114 -* Temperature:
115 -** Storage: -55 ~~ +125℃
116 -** Operating: -40 ~~ +85℃
117 -* Humidity:
118 -** Storage: 5 ~~ 95% (Non-Condensing)
119 -** Operating: 10 ~~ 95% (Non-Condensing)
120 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
121 -* LoRa Rx current: <9 mA
122 -* I/O Voltage: 3.3v
123 123  
118 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
124 124  
125 -== 2.4  Pin Mapping & LED ==
120 +example: AT+SENDB=01,02,8,05820802581ea0a5
126 126  
122 +[[image:image-20220602162157-11.png||height="497" width="800"]]
127 127  
128 128  
129 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
130 130  
126 +(% style="color:blue" %)**4. Check to see if TTN received the message**
131 131  
132 132  
133 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
129 +[[image:image-20220817093644-1.png]]
134 134  
135 135  
136 136  
137 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
133 +== 1.6  Example: How to join helium ==
138 138  
135 +(% style="color:blue" %)**1. Create a new device.**
139 139  
137 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
140 140  
141 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
142 142  
140 +(% style="color:blue" %)**2. Save the device after filling in the necessary information.**
143 143  
144 -=== 2.8.1  Items needed for update ===
142 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
145 145  
146 -1. LA66 LoRaWAN Shield
147 -1. Arduino
148 -1. USB TO TTL Adapter
149 149  
150 -[[image:image-20220602100052-2.png||height="385" width="600"]]
145 +(% style="color:blue" %)**3.  Use AT commands.**
151 151  
147 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
152 152  
153 -=== 2.8.2  Connection ===
154 154  
150 +(% style="color:blue" %)**4..  Use the serial port tool**
155 155  
156 -[[image:image-20220602101311-3.png||height="276" width="600"]]
152 +[[image:image-20220909151517-2.png||height="543" width="708"]]
157 157  
158 158  
159 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
155 +(% style="color:blue" %)**5.Use command AT+CFG to get device configuration**
160 160  
161 -(% style="background-color:yellow" %)**GND  <-> GND
162 -TXD  <->  TXD
163 -RXD  <->  RXD**
157 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
164 164  
165 165  
166 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
160 +(% style="color:blue" %)**6.  Network successfully.**
167 167  
168 -Connect USB TTL Adapter to PC after connecting the wires
162 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
169 169  
170 170  
171 -[[image:image-20220602102240-4.png||height="304" width="600"]]
165 +(% style="color:blue" %)**7.  Send uplink using command**
172 172  
167 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170659-5.png?rev=1.1||alt="image-20220907170659-5.png"]]
173 173  
174 -=== 2.8.3  Upgrade steps ===
169 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
175 175  
176 176  
177 -==== 1.  Switch SW1 to put in ISP position ====
172 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
178 178  
179 179  
180 -[[image:image-20220602102824-5.png||height="306" width="600"]]
175 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
181 181  
177 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
182 182  
183 183  
184 -==== 2.  Press the RST switch once ====
180 +(% style="color:red" %)**Preconditions:**
185 185  
182 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
186 186  
187 -[[image:image-20220602104701-12.png||height="285" width="600"]]
184 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
188 188  
189 189  
190 190  
191 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
188 +(% style="color:blue" %)**Steps for usage:**
192 192  
190 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
193 193  
194 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
192 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
195 195  
196 196  
197 -[[image:image-20220602103227-6.png]]
195 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
198 198  
199 199  
200 -[[image:image-20220602103357-7.png]]
201 201  
199 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
202 202  
203 203  
204 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
205 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
202 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
206 206  
207 207  
208 -[[image:image-20220602103844-8.png]]
205 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
209 209  
210 210  
208 +[[image:image-20220723100439-2.png]]
211 211  
212 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
213 -(% style="color:blue" %)**3. Select the bin file to burn**
214 214  
215 215  
216 -[[image:image-20220602104144-9.png]]
212 +(% style="color:blue" %)**2. Install Minicom in RPi.**
217 217  
218 218  
219 -[[image:image-20220602104251-10.png]]
215 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
220 220  
217 + (% style="background-color:yellow" %)**apt update**
221 221  
222 -[[image:image-20220602104402-11.png]]
219 + (% style="background-color:yellow" %)**apt install minicom**
223 223  
224 224  
222 +Use minicom to connect to the RPI's terminal
225 225  
226 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
227 -(% style="color:blue" %)**4. Click to start the download**
224 +[[image:image-20220602153146-3.png||height="439" width="500"]]
228 228  
229 -[[image:image-20220602104923-13.png]]
230 230  
231 231  
228 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
232 232  
233 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
234 -(% style="color:blue" %)**5. Check update process**
235 235  
231 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
236 236  
237 -[[image:image-20220602104948-14.png]]
238 238  
234 +[[image:image-20220602154928-5.png||height="436" width="500"]]
239 239  
240 240  
241 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
242 -(% style="color:blue" %)**The following picture shows that the burning is successful**
243 243  
244 -[[image:image-20220602105251-15.png]]
238 +(% style="color:blue" %)**4. Send Uplink message**
245 245  
246 246  
241 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
247 247  
248 -= 3.  LA66 USB LoRaWAN Adapter =
243 +example: AT+SENDB=01,02,8,05820802581ea0a5
249 249  
250 250  
251 -== 3.1  Overview ==
246 +[[image:image-20220602160339-6.png||height="517" width="600"]]
252 252  
253 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
254 254  
255 255  
256 -== 3.2  Features ==
250 +Check to see if TTN received the message
257 257  
258 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
259 -* Ultra-long RF range
260 -* Support LoRaWAN v1.0.4 protocol
261 -* Support peer-to-peer protocol
262 -* TCXO crystal to ensure RF performance on low temperature
263 -* Spring RF antenna
264 -* Available in different frequency LoRaWAN frequency bands.
265 -* World-wide unique OTAA keys.
266 -* AT Command via UART-TTL interface
267 -* Firmware upgradable via UART interface
252 +[[image:image-20220602160627-7.png||height="369" width="800"]]
268 268  
269 269  
270 -== 3.3  Specification ==
271 271  
272 -* CPU: 32-bit 48 MHz
273 -* Flash: 256KB
274 -* RAM: 64KB
275 -* Input Power Range: 5v
276 -* Frequency Range: 150 MHz ~~ 960 MHz
277 -* Maximum Power +22 dBm constant RF output
278 -* High sensitivity: -148 dBm
279 -* Temperature:
280 -** Storage: -55 ~~ +125℃
281 -** Operating: -40 ~~ +85℃
282 -* Humidity:
283 -** Storage: 5 ~~ 95% (Non-Condensing)
284 -** Operating: 10 ~~ 95% (Non-Condensing)
285 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
286 -* LoRa Rx current: <9 mA
256 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
287 287  
288 288  
289 -== 3.4  Pin Mapping & LED ==
259 +=== 1.9.1  Hardware and Software Connection ===
290 290  
291 291  
292 292  
293 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
263 +==== (% style="color:blue" %)**Overview：**(%%) ====
294 294  
295 295  
296 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
266 +(((
267 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
297 297  
269 +* Send real-time location information of mobile phone to LoRaWAN network.
270 +* Check LoRaWAN network signal strengh.
271 +* Manually send messages to LoRaWAN network.
272 +)))
298 298  
299 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
300 300  
301 301  
302 -[[image:image-20220602171217-1.png||height="538" width="800"]]
303 303  
277 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
304 304  
305 -Open the serial port tool
306 306  
307 -[[image:image-20220602161617-8.png]]
280 +A USB to Type-C adapter is needed to connect to a Mobile phone.
308 308  
309 -[[image:image-20220602161718-9.png||height="457" width="800"]]
282 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
310 310  
284 +[[image:image-20220813174353-2.png||height="360" width="313"]]
311 311  
312 312  
313 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
314 314  
315 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
288 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
316 316  
317 317  
318 -[[image:image-20220602161935-10.png||height="498" width="800"]]
291 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
319 319  
293 +[[image:image-20220813173738-1.png]]
320 320  
321 321  
322 -(% style="color:blue" %)**3. See Uplink Command**
323 323  
324 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
297 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
325 325  
326 -example: AT+SENDB=01,02,8,05820802581ea0a5
327 327  
328 -[[image:image-20220602162157-11.png||height="497" width="800"]]
300 +Function and page introduction
329 329  
330 330  
303 +[[image:image-20220723113448-7.png||height="995" width="450"]]
331 331  
332 -(% style="color:blue" %)**4. Check to see if TTN received the message**
305 +**Block Explain:**
333 333  
334 -[[image:image-20220602162331-12.png||height="420" width="800"]]
307 +1.  Display LA66 USB LoRaWAN Module connection status
335 335  
309 +2.  Check and reconnect
336 336  
311 +3.  Turn send timestamps on or off
337 337  
338 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
313 +4.  Display LoRaWan connection status
339 339  
315 +5.  Check LoRaWan connection status
340 340  
341 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
317 +6.  The RSSI value of the node when the ACK is received
342 342  
319 +7.  Node's Signal Strength Icon
343 343  
344 -(% style="color:red" %)**Preconditions:**
321 +8.  Configure Location Uplink Interval
345 345  
346 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
323 +9.  AT command input box
347 347  
348 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
325 +10.  Send Button:  Send input box info to LA66 USB Adapter
349 349  
327 +11.  Output Log from LA66 USB adapter
350 350  
329 +12.  clear log button
351 351  
352 -(% style="color:blue" %)**Steps for usage:**
331 +13.  exit button
353 353  
354 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
355 355  
356 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
357 357  
358 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
335 +LA66 USB LoRaWAN Module not connected
359 359  
360 360  
338 +[[image:image-20220723110520-5.png||height="677" width="508"]]
361 361  
362 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
363 363  
364 364  
365 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
342 +Connect LA66 USB LoRaWAN Module
366 366  
344 +[[image:image-20220723110626-6.png||height="681" width="511"]]
367 367  
368 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
369 369  
370 -[[image:image-20220602171233-2.png||height="538" width="800"]]
371 371  
348 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
372 372  
373 373  
374 -(% style="color:blue" %)**2. Install Minicom in RPi.**
351 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
375 375  
376 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
377 377  
378 - (% style="background-color:yellow" %)**apt update**
354 +[[image:image-20220723134549-8.png]]
379 379  
380 - (% style="background-color:yellow" %)**apt install minicom**
381 381  
382 382  
383 -Use minicom to connect to the RPI's terminal
358 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
384 384  
385 -[[image:image-20220602153146-3.png||height="439" width="500"]]
386 386  
361 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
387 387  
363 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
388 388  
389 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
365 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
390 390  
391 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
367 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
392 392  
393 393  
394 -[[image:image-20220602154928-5.png||height="436" width="500"]]
370 +Example output in NodeRed is as below:
395 395  
372 +[[image:image-20220723144339-1.png]]
396 396  
397 397  
398 -(% style="color:blue" %)**4. Send Uplink message**
399 399  
400 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
376 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
401 401  
402 -example: AT+SENDB=01,02,8,05820802581ea0a5
403 403  
379 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
404 404  
405 -[[image:image-20220602160339-6.png||height="517" width="600"]]
381 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
406 406  
407 407  
384 +[[image:image-20220723150132-2.png]]
408 408  
409 -Check to see if TTN received the message
410 410  
411 -[[image:image-20220602160627-7.png||height="369" width="800"]]
412 412  
388 += 2.  FAQ =
413 413  
414 414  
415 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
391 +== 2.1  How to Compile Source Code for LA66? ==
416 416  
417 417  
394 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
418 418  
419 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
420 420  
421 421  
398 += 3.  Order Info =
422 422  
423 423  
424 -= 4.  Order Info =
401 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
425 425  
426 426  
427 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
428 -
429 -
430 430  (% style="color:blue" %)**XXX**(%%): The default frequency band
431 431  
432 432  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -439,10 +439,10 @@
439 439  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
440 440  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
441 441  
416 += 4.  Reference =
442 442  
443 443  
444 -= 5.  Reference =
419 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
420 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
445 445  
446 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
447 -
448 448  
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0