Last modified by Xiaoling on 2025/02/07 16:37

From version 78.1
edited by Edwin Chen
on 2022/07/10 21:41
Change comment: There is no comment for this version
To version 148.2
edited by Xiaoling
on 2022/08/17 08:46
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,41 +1,68 @@
1 -{{box cssClass="floatinginfobox" title="**Contents**"}}
1 +
2 +
3 +**Table of Contents:**
4 +
2 2  {{toc/}}
3 -{{/box}}
4 4  
5 -= LA66 LoRaWAN Module =
6 6  
7 -== What is LA66 LoRaWAN Module ==
8 8  
9 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
10 10  
11 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
12 12  
11 += 1.  LA66 USB LoRaWAN Adapter =
12 +
13 +
14 +== 1.1  Overview ==
15 +
16 +
17 +[[image:image-20220715001142-3.png||height="145" width="220"]]
18 +
19 +
20 +(((
21 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 +)))
27 +
28 +(((
13 13  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 +)))
14 14  
32 +(((
15 15  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 +)))
16 16  
36 +(((
17 17  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 +)))
18 18  
19 19  
20 -== Features ==
21 21  
42 +== 1.2  Features ==
43 +
44 +
45 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 +* Ultra-long RF range
22 22  * Support LoRaWAN v1.0.4 protocol
23 23  * Support peer-to-peer protocol
24 24  * TCXO crystal to ensure RF performance on low temperature
25 -* SMD Antenna pad and i-pex antenna connector
50 +* Spring RF antenna
26 26  * Available in different frequency LoRaWAN frequency bands.
27 27  * World-wide unique OTAA keys.
28 28  * AT Command via UART-TTL interface
29 29  * Firmware upgradable via UART interface
30 -* Ultra-long RF range
55 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
31 31  
32 -== Specification ==
33 33  
58 +
59 +== 1.3  Specification ==
60 +
61 +
34 34  * CPU: 32-bit 48 MHz
35 35  * Flash: 256KB
36 36  * RAM: 64KB
37 -* Input Power Range: 1.8v ~~ 3.7v
38 -* Power Consumption: < 4uA.
65 +* Input Power Range: 5v
39 39  * Frequency Range: 150 MHz ~~ 960 MHz
40 40  * Maximum Power +22 dBm constant RF output
41 41  * High sensitivity: -148 dBm
... ... @@ -47,350 +47,292 @@
47 47  ** Operating: 10 ~~ 95% (Non-Condensing)
48 48  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
49 49  * LoRa Rx current: <9 mA
50 -* I/O Voltage: 3.3v
51 51  
52 -== AT Command ==
53 53  
54 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
55 55  
80 +== 1.4  Pin Mapping & LED ==
56 56  
57 -== Dimension ==
82 +[[image:image-20220813183239-3.png||height="526" width="662"]]
58 58  
59 -[[image:image-20220517072526-1.png]]
60 60  
61 61  
62 -== Pin Mapping ==
86 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
63 63  
64 -[[image:image-20220523101537-1.png]]
65 65  
66 -== Land Pattern ==
89 +(((
90 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
91 +)))
67 67  
68 -[[image:image-20220517072821-2.png]]
69 69  
94 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
70 70  
71 -== Order Info ==
72 72  
73 -Part Number: **LA66-XXX**
97 +[[image:image-20220723100027-1.png]]
74 74  
75 -**XX**: The default frequency band
76 76  
77 -* **AS923**: LoRaWAN AS923 band
78 -* **AU915**: LoRaWAN AU915 band
79 -* **EU433**: LoRaWAN EU433 band
80 -* **EU868**: LoRaWAN EU868 band
81 -* **KR920**: LoRaWAN KR920 band
82 -* **US915**: LoRaWAN US915 band
83 -* **IN865**: LoRaWAN IN865 band
84 -* **CN470**: LoRaWAN CN470 band
85 -* **PP**: Peer to Peer LoRa Protocol
100 +Open the serial port tool
86 86  
87 -= LA66 LoRaWAN Shield =
102 +[[image:image-20220602161617-8.png]]
88 88  
89 -== Overview ==
104 +[[image:image-20220602161718-9.png||height="457" width="800"]]
90 90  
91 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
92 92  
93 93  
94 -== Features ==
108 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
95 95  
96 -* Arduino Shield base on LA66 LoRaWAN module
97 -* Support LoRaWAN v1.0.4 protocol
98 -* Support peer-to-peer protocol
99 -* TCXO crystal to ensure RF performance on low temperature
100 -* SMA connector
101 -* Available in different frequency LoRaWAN frequency bands.
102 -* World-wide unique OTAA keys.
103 -* AT Command via UART-TTL interface
104 -* Firmware upgradable via UART interface
105 -* Ultra-long RF range
110 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
106 106  
107 -== Specification ==
108 108  
109 -* CPU: 32-bit 48 MHz
110 -* Flash: 256KB
111 -* RAM: 64KB
112 -* Input Power Range: 1.8v ~~ 3.7v
113 -* Power Consumption: < 4uA.
114 -* Frequency Range: 150 MHz ~~ 960 MHz
115 -* Maximum Power +22 dBm constant RF output
116 -* High sensitivity: -148 dBm
117 -* Temperature:
118 -** Storage: -55 ~~ +125℃
119 -** Operating: -40 ~~ +85℃
120 -* Humidity:
121 -** Storage: 5 ~~ 95% (Non-Condensing)
122 -** Operating: 10 ~~ 95% (Non-Condensing)
123 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 -* LoRa Rx current: <9 mA
125 -* I/O Voltage: 3.3v
113 +[[image:image-20220602161935-10.png||height="498" width="800"]]
126 126  
127 -== Pin Mapping & LED ==
128 128  
129 -== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
130 130  
131 -== Example: Join TTN network and send an uplink message, get downlink message. ==
117 +(% style="color:blue" %)**3. See Uplink Command**
132 132  
133 -== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
119 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
134 134  
135 -== Upgrade Firmware of LA66 LoRaWAN Shield ==
121 +example: AT+SENDB=01,02,8,05820802581ea0a5
136 136  
137 -=== Items needed for update ===
123 +[[image:image-20220602162157-11.png||height="497" width="800"]]
138 138  
139 -1. LA66 LoRaWAN Shield
140 -1. Arduino
141 -1. USB TO TTL Adapter
142 142  
143 -[[image:image-20220602100052-2.png||height="385" width="600"]]
144 144  
127 +(% style="color:blue" %)**4. Check to see if TTN received the message**
145 145  
146 -=== Connection ===
129 +[[image:image-20220817084532-1.jpeg||height="563" width="1076"]]
147 147  
148 -[[image:image-20220602101311-3.png||height="276" width="600"]]
149 149  
150 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 -**GND  <-> GND
152 -TXD  <-> TXD
153 -RXD  <-> RXD**
154 154  
155 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
133 +== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
156 156  
157 -Connect USB TTL Adapter to PC after connecting the wires
158 158  
136 +**Use python as an example:**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
159 159  
160 -[[image:image-20220602102240-4.png||height="304" width="600"]]
138 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
161 161  
140 +(% style="color:red" %)**Preconditions:**
162 162  
163 -=== Upgrade steps ===
142 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
164 164  
165 -==== Switch SW1 to put in ISP position ====
144 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
166 166  
167 -[[image:image-20220602102824-5.png||height="306" width="600"]]
168 168  
169 169  
170 -==== Press the RST switch once ====
148 +(% style="color:blue" %)**Steps for usage:**
171 171  
172 -[[image:image-20220602104701-12.png||height="285" width="600"]]
150 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
173 173  
152 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
174 174  
175 -==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
154 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
176 176  
177 -**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
178 178  
179 -[[image:image-20220602103227-6.png]]
180 180  
181 -[[image:image-20220602103357-7.png]]
158 +== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
182 182  
183 183  
184 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
185 -**2. Select the COM port corresponding to USB TTL**
161 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
186 186  
187 -[[image:image-20220602103844-8.png]]
188 188  
164 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
189 189  
190 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
191 -**3. Select the bin file to burn**
166 +[[image:image-20220723100439-2.png]]
192 192  
193 -[[image:image-20220602104144-9.png]]
194 194  
195 -[[image:image-20220602104251-10.png]]
196 196  
197 -[[image:image-20220602104402-11.png]]
170 +(% style="color:blue" %)**2. Install Minicom in RPi.**
198 198  
172 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
199 199  
200 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
201 -**4. Click to start the download**
174 + (% style="background-color:yellow" %)**apt update**
202 202  
203 -[[image:image-20220602104923-13.png]]
176 + (% style="background-color:yellow" %)**apt install minicom**
204 204  
205 205  
206 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
207 -**5. Check update process**
179 +Use minicom to connect to the RPI's terminal
208 208  
209 -[[image:image-20220602104948-14.png]]
181 +[[image:image-20220602153146-3.png||height="439" width="500"]]
210 210  
211 211  
212 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
213 -**The following picture shows that the burning is successful**
214 214  
215 -[[image:image-20220602105251-15.png]]
185 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
216 216  
187 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
217 217  
218 -== Order Info ==
219 219  
220 -Part Number: **LA66-LoRaWAN-Shield-XXX**
190 +[[image:image-20220602154928-5.png||height="436" width="500"]]
221 221  
222 -**XX**: The default frequency band
223 223  
224 -* **AS923**: LoRaWAN AS923 band
225 -* **AU915**: LoRaWAN AU915 band
226 -* **EU433**: LoRaWAN EU433 band
227 -* **EU868**: LoRaWAN EU868 band
228 -* **KR920**: LoRaWAN KR920 band
229 -* **US915**: LoRaWAN US915 band
230 -* **IN865**: LoRaWAN IN865 band
231 -* **CN470**: LoRaWAN CN470 band
232 -* **PP**: Peer to Peer LoRa Protocol
233 233  
234 -== Package Info ==
194 +(% style="color:blue" %)**4. Send Uplink message**
235 235  
236 -* LA66 LoRaWAN Shield x 1
237 -* RF Antenna x 1
196 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
238 238  
239 -= LA66 USB LoRaWAN Adapter =
198 +example: AT+SENDB=01,02,8,05820802581ea0a5
240 240  
241 -== Overview ==
242 242  
243 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
201 +[[image:image-20220602160339-6.png||height="517" width="600"]]
244 244  
245 245  
246 -== Features ==
247 247  
248 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
249 -* Ultra-long RF range
250 -* Support LoRaWAN v1.0.4 protocol
251 -* Support peer-to-peer protocol
252 -* TCXO crystal to ensure RF performance on low temperature
253 -* Spring RF antenna
254 -* Available in different frequency LoRaWAN frequency bands.
255 -* World-wide unique OTAA keys.
256 -* AT Command via UART-TTL interface
257 -* Firmware upgradable via UART interface
205 +Check to see if TTN received the message
258 258  
259 -== Specification ==
207 +[[image:image-20220602160627-7.png||height="369" width="800"]]
260 260  
261 -* CPU: 32-bit 48 MHz
262 -* Flash: 256KB
263 -* RAM: 64KB
264 -* Input Power Range: 5v
265 -* Frequency Range: 150 MHz ~~ 960 MHz
266 -* Maximum Power +22 dBm constant RF output
267 -* High sensitivity: -148 dBm
268 -* Temperature:
269 -** Storage: -55 ~~ +125℃
270 -** Operating: -40 ~~ +85℃
271 -* Humidity:
272 -** Storage: 5 ~~ 95% (Non-Condensing)
273 -** Operating: 10 ~~ 95% (Non-Condensing)
274 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
275 -* LoRa Rx current: <9 mA
276 276  
277 -== Pin Mapping & LED ==
278 278  
279 -== Example Send & Get Messages via LoRaWAN in PC ==
211 +== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
280 280  
281 -Connect the LA66 LoRa Shield to the PC
282 282  
283 -[[image:image-20220602171217-1.png||height="615" width="915"]]
214 +=== 1.8.1  Hardware and Software Connection ===
284 284  
285 -Open the serial port tool
286 286  
287 -[[image:image-20220602161617-8.png]]
288 288  
289 -[[image:image-20220602161718-9.png||height="529" width="927"]]
218 +==== (% style="color:blue" %)**Overview:**(%%) ====
290 290  
291 -Press the reset switch RST on the LA66 LoRa Shield.
292 292  
293 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
221 +(((
222 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
294 294  
295 -[[image:image-20220602161935-10.png]]
224 +* Send real-time location information of mobile phone to LoRaWAN network.
225 +* Check LoRaWAN network signal strengh.
226 +* Manually send messages to LoRaWAN network.
227 +)))
296 296  
297 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
298 298  
299 -example: AT+SENDB=01,02,8,05820802581ea0a5
300 300  
301 -[[image:image-20220602162157-11.png]]
302 302  
303 -Check to see if TTN received the message
232 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
304 304  
305 -[[image:image-20220602162331-12.png||height="547" width="1044"]]
234 +A USB to Type-C adapter is needed to connect to a Mobile phone.
306 306  
307 -== Example Send & Get Messages via LoRaWAN in RPi ==
236 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
308 308  
309 -Connect the LA66 LoRa Shield to the RPI
238 +[[image:image-20220813174353-2.png||height="360" width="313"]]
310 310  
311 -[[image:image-20220602171233-2.png||height="592" width="881"]]
312 312  
313 -Log in to the RPI's terminal and connect to the serial port
314 314  
315 -[[image:image-20220602153146-3.png]]
242 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
316 316  
317 -Press the reset switch RST on the LA66 LoRa Shield.
318 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
244 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
319 319  
320 -[[image:image-20220602154928-5.png]]
246 +[[image:image-20220813173738-1.png]]
321 321  
322 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
323 323  
324 -example: AT+SENDB=01,02,8,05820802581ea0a5
325 325  
326 -[[image:image-20220602160339-6.png]]
250 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
327 327  
328 -Check to see if TTN received the message
252 +Function and page introduction
329 329  
330 -[[image:image-20220602160627-7.png||height="468" width="1013"]]
254 +[[image:image-20220723113448-7.png||height="995" width="450"]]
331 331  
332 -=== Install Minicom ===
256 +**Block Explain:**
333 333  
334 -Enter the following command in the RPI terminal
258 +1.  Display LA66 USB LoRaWAN Module connection status
335 335  
336 -apt update
260 +2.  Check and reconnect
337 337  
338 -[[image:image-20220602143155-1.png]]
262 +3.  Turn send timestamps on or off
339 339  
340 -apt install minicom
264 +4.  Display LoRaWan connection status
341 341  
342 -[[image:image-20220602143744-2.png]]
266 +5.  Check LoRaWan connection status
343 343  
344 -=== Send PC's CPU/RAM usage to TTN via script. ===
268 +6.  The RSSI value of the node when the ACK is received
345 345  
346 -==== Take python as an example ====
270 +7.  Node's Signal Strength Icon
347 347  
348 -===== Preconditions: =====
272 +8.  Configure Location Uplink Interval
349 349  
350 -1.LA66 USB LoRaWAN Adapter works fine
274 +9.  AT command input box
351 351  
352 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
276 +10.  Send Button:  Send input box info to LA66 USB Adapter
353 353  
354 -===== Steps for usage =====
278 +11.  Output Log from LA66 USB adapter
355 355  
356 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
280 +12.  clear log button
357 357  
358 -2.Run the script and see the TTN
282 +13.  exit button
359 359  
360 -[[image:image-20220602115852-3.png]]
361 361  
285 +LA66 USB LoRaWAN Module not connected
362 362  
287 +[[image:image-20220723110520-5.png||height="677" width="508"]]
363 363  
364 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
365 365  
366 366  
367 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
291 +Connect LA66 USB LoRaWAN Module
368 368  
293 +[[image:image-20220723110626-6.png||height="681" width="511"]]
369 369  
370 370  
371 -== Order Info ==
372 372  
373 -Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
297 +=== 1.8.2 Send data to TTNv3 and plot location info in Node-Red ===
374 374  
375 -**XX**: The default frequency band
376 376  
377 -* **AS923**: LoRaWAN AS923 band
378 -* **AU915**: LoRaWAN AU915 band
379 -* **EU433**: LoRaWAN EU433 band
380 -* **EU868**: LoRaWAN EU868 band
381 -* **KR920**: LoRaWAN KR920 band
382 -* **US915**: LoRaWAN US915 band
383 -* **IN865**: LoRaWAN IN865 band
384 -* **CN470**: LoRaWAN CN470 band
385 -* **PP**: Peer to Peer LoRa Protocol
300 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
386 386  
387 -== Package Info ==
302 +[[image:image-20220723134549-8.png]]
388 388  
389 -* LA66 USB LoRaWAN Adapter x 1
390 390  
391 391  
392 -= Reference =
306 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
393 393  
394 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
308 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
395 395  
396 -
310 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
311 +
312 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
313 +
314 +
315 +Example output in NodeRed is as below:
316 +
317 +[[image:image-20220723144339-1.png]]
318 +
319 +
320 +
321 +== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
322 +
323 +
324 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
325 +
326 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
327 +
328 +[[image:image-20220723150132-2.png]]
329 +
330 +
331 +
332 += 2.  FAQ =
333 +
334 +
335 +== 2.1  How to Compile Source Code for LA66? ==
336 +
337 +
338 +Compile and Upload Code to ASR6601 Platform :[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
339 +
340 +
341 +
342 += 3.  Order Info =
343 +
344 +
345 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
346 +
347 +
348 +(% style="color:blue" %)**XXX**(%%): The default frequency band
349 +
350 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
351 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
352 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
353 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
354 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
355 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
356 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
357 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
358 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
359 +
360 +
361 +
362 += 4.  Reference =
363 +
364 +
365 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content