Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 75.1
edited by Edwin Chen
on 2022/07/03 00:21
Change comment: There is no comment for this version
To version 149.2
edited by Xiaoling
on 2022/08/17 09:37
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,41 +1,68 @@
1 -{{box cssClass="floatinginfobox" title="**Contents**"}}
1 +
2 +
3 +**Table of Contents:**
4 +
2 2  {{toc/}}
3 -{{/box}}
4 4  
5 -= LA66 LoRaWAN Module =
6 6  
7 -== What is LA66 LoRaWAN Module ==
8 8  
9 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
10 10  
11 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
12 12  
11 += 1.  LA66 USB LoRaWAN Adapter =
12 +
13 +
14 +== 1.1  Overview ==
15 +
16 +
17 +[[image:image-20220715001142-3.png||height="145" width="220"]]
18 +
19 +
20 +(((
21 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 +)))
27 +
28 +(((
13 13  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 +)))
14 14  
32 +(((
15 15  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 +)))
16 16  
36 +(((
17 17  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 +)))
18 18  
19 19  
20 -== Features ==
21 21  
42 +== 1.2  Features ==
43 +
44 +
45 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 +* Ultra-long RF range
22 22  * Support LoRaWAN v1.0.4 protocol
23 23  * Support peer-to-peer protocol
24 24  * TCXO crystal to ensure RF performance on low temperature
25 -* SMD Antenna pad and i-pex antenna connector
50 +* Spring RF antenna
26 26  * Available in different frequency LoRaWAN frequency bands.
27 27  * World-wide unique OTAA keys.
28 28  * AT Command via UART-TTL interface
29 29  * Firmware upgradable via UART interface
30 -* Ultra-long RF range
55 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
31 31  
32 -== Specification ==
33 33  
58 +
59 +== 1.3  Specification ==
60 +
61 +
34 34  * CPU: 32-bit 48 MHz
35 35  * Flash: 256KB
36 36  * RAM: 64KB
37 -* Input Power Range: 1.8v ~~ 3.7v
38 -* Power Consumption: < 4uA.
65 +* Input Power Range: 5v
39 39  * Frequency Range: 150 MHz ~~ 960 MHz
40 40  * Maximum Power +22 dBm constant RF output
41 41  * High sensitivity: -148 dBm
... ... @@ -47,336 +47,293 @@
47 47  ** Operating: 10 ~~ 95% (Non-Condensing)
48 48  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
49 49  * LoRa Rx current: <9 mA
50 -* I/O Voltage: 3.3v
51 51  
52 -== AT Command ==
53 53  
54 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
55 55  
80 +== 1.4  Pin Mapping & LED ==
56 56  
57 -== Dimension ==
82 +[[image:image-20220813183239-3.png||height="526" width="662"]]
58 58  
59 -[[image:image-20220517072526-1.png]]
60 60  
61 61  
62 -== Pin Mapping ==
86 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
63 63  
64 -[[image:image-20220523101537-1.png]]
65 65  
66 -== Land Pattern ==
89 +(((
90 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
91 +)))
67 67  
68 -[[image:image-20220517072821-2.png]]
69 69  
94 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
70 70  
71 -== Order Info ==
72 72  
73 -Part Number: **LA66-XXX**
97 +[[image:image-20220723100027-1.png]]
74 74  
75 -**XX**: The default frequency band
76 76  
77 -* **AS923**: LoRaWAN AS923 band
78 -* **AU915**: LoRaWAN AU915 band
79 -* **EU433**: LoRaWAN EU433 band
80 -* **EU868**: LoRaWAN EU868 band
81 -* **KR920**: LoRaWAN KR920 band
82 -* **US915**: LoRaWAN US915 band
83 -* **IN865**: LoRaWAN IN865 band
84 -* **CN470**: LoRaWAN CN470 band
85 -* **PP**: Peer to Peer LoRa Protocol
100 +Open the serial port tool
86 86  
87 -= LA66 LoRaWAN Shield =
102 +[[image:image-20220602161617-8.png]]
88 88  
89 -== Overview ==
104 +[[image:image-20220602161718-9.png||height="457" width="800"]]
90 90  
91 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
92 92  
93 93  
94 -== Features ==
108 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
95 95  
96 -* Arduino Shield base on LA66 LoRaWAN module
97 -* Support LoRaWAN v1.0.4 protocol
98 -* Support peer-to-peer protocol
99 -* TCXO crystal to ensure RF performance on low temperature
100 -* SMA connector
101 -* Available in different frequency LoRaWAN frequency bands.
102 -* World-wide unique OTAA keys.
103 -* AT Command via UART-TTL interface
104 -* Firmware upgradable via UART interface
105 -* Ultra-long RF range
110 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
106 106  
107 -== Specification ==
108 108  
109 -* CPU: 32-bit 48 MHz
110 -* Flash: 256KB
111 -* RAM: 64KB
112 -* Input Power Range: 1.8v ~~ 3.7v
113 -* Power Consumption: < 4uA.
114 -* Frequency Range: 150 MHz ~~ 960 MHz
115 -* Maximum Power +22 dBm constant RF output
116 -* High sensitivity: -148 dBm
117 -* Temperature:
118 -** Storage: -55 ~~ +125℃
119 -** Operating: -40 ~~ +85℃
120 -* Humidity:
121 -** Storage: 5 ~~ 95% (Non-Condensing)
122 -** Operating: 10 ~~ 95% (Non-Condensing)
123 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 -* LoRa Rx current: <9 mA
125 -* I/O Voltage: 3.3v
113 +[[image:image-20220602161935-10.png||height="498" width="800"]]
126 126  
127 -== Pin Mapping & LED ==
128 128  
129 -== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
130 130  
131 -== Example: Join TTN network and send an uplink message, get downlink message. ==
117 +(% style="color:blue" %)**3. See Uplink Command**
132 132  
133 -== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
119 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
134 134  
135 -== Upgrade Firmware of LA66 LoRaWAN Shield ==
121 +example: AT+SENDB=01,02,8,05820802581ea0a5
136 136  
137 -=== Items needed for update ===
123 +[[image:image-20220602162157-11.png||height="497" width="800"]]
138 138  
139 -1. LA66 LoRaWAN Shield
140 -1. Arduino
141 -1. USB TO TTL Adapter
142 142  
143 -[[image:image-20220602100052-2.png||height="385" width="600"]]
144 144  
127 +(% style="color:blue" %)**4. Check to see if TTN received the message**
145 145  
146 -=== Connection ===
147 147  
148 -[[image:image-20220602101311-3.png||height="276" width="600"]]
149 149  
150 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 -**GND  <-> GND
152 -TXD  <-> TXD
153 -RXD  <-> RXD**
131 +[[image:image-20220817093644-1.png]]
154 154  
155 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield.
156 156  
157 -Connect USB TTL Adapter to PC after connecting the wires
158 158  
135 +== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
159 159  
160 -[[image:image-20220602102240-4.png||height="304" width="600"]]
161 161  
138 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
162 162  
163 -=== Upgrade steps ===
140 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
164 164  
165 -==== Switch SW1 to put in ISP position ====
142 +(% style="color:red" %)**Preconditions:**
166 166  
167 -[[image:image-20220602102824-5.png||height="306" width="600"]]
144 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
168 168  
146 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
169 169  
170 -==== Press the RST switch once ====
171 171  
172 -[[image:image-20220602104701-12.png||height="285" width="600"]]
173 173  
150 +(% style="color:blue" %)**Steps for usage:**
174 174  
175 -==== Open the Upgrade tool (Tremo Programmer) in PC ====
152 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
176 176  
177 -Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
154 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
178 178  
179 -[[image:image-20220602103227-6.png]]
156 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
180 180  
181 -[[image:image-20220602103357-7.png]]
182 182  
183 -===== Select the COM port corresponding to USB TTL =====
184 184  
185 -[[image:image-20220602103844-8.png]]
160 +== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
186 186  
187 -===== Select the bin file to burn =====
188 188  
189 -[[image:image-20220602104144-9.png]]
163 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
190 190  
191 -[[image:image-20220602104251-10.png]]
192 192  
193 -[[image:image-20220602104402-11.png]]
166 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
194 194  
195 -===== Click to start the download =====
168 +[[image:image-20220723100439-2.png]]
196 196  
197 -[[image:image-20220602104923-13.png]]
198 198  
199 -===== The following figure appears to prove that the burning is in progress =====
200 200  
201 -[[image:image-20220602104948-14.png]]
172 +(% style="color:blue" %)**2. Install Minicom in RPi.**
202 202  
203 -===== The following picture appears to prove that the burning is successful =====
174 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
204 204  
205 -[[image:image-20220602105251-15.png]]
176 + (% style="background-color:yellow" %)**apt update**
206 206  
178 + (% style="background-color:yellow" %)**apt install minicom**
207 207  
208 -== Order Info ==
209 209  
210 -Part Number: **LA66-LoRaWAN-Shield-XXX**
181 +Use minicom to connect to the RPI's terminal
211 211  
212 -**XX**: The default frequency band
183 +[[image:image-20220602153146-3.png||height="439" width="500"]]
213 213  
214 -* **AS923**: LoRaWAN AS923 band
215 -* **AU915**: LoRaWAN AU915 band
216 -* **EU433**: LoRaWAN EU433 band
217 -* **EU868**: LoRaWAN EU868 band
218 -* **KR920**: LoRaWAN KR920 band
219 -* **US915**: LoRaWAN US915 band
220 -* **IN865**: LoRaWAN IN865 band
221 -* **CN470**: LoRaWAN CN470 band
222 -* **PP**: Peer to Peer LoRa Protocol
223 223  
224 -== Package Info ==
225 225  
226 -* LA66 LoRaWAN Shield x 1
227 -* RF Antenna x 1
187 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
228 228  
189 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
229 229  
230 -= LA66 USB LoRaWAN Adapter =
231 231  
232 -== Overview ==
192 +[[image:image-20220602154928-5.png||height="436" width="500"]]
233 233  
234 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
235 235  
236 236  
237 -== Features ==
196 +(% style="color:blue" %)**4. Send Uplink message**
238 238  
239 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
240 -* Ultra-long RF range
241 -* Support LoRaWAN v1.0.4 protocol
242 -* Support peer-to-peer protocol
243 -* TCXO crystal to ensure RF performance on low temperature
244 -* Spring RF antenna
245 -* Available in different frequency LoRaWAN frequency bands.
246 -* World-wide unique OTAA keys.
247 -* AT Command via UART-TTL interface
248 -* Firmware upgradable via UART interface
198 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
249 249  
250 -== Specification ==
200 +example: AT+SENDB=01,02,8,05820802581ea0a5
251 251  
252 -* CPU: 32-bit 48 MHz
253 -* Flash: 256KB
254 -* RAM: 64KB
255 -* Input Power Range: 5v
256 -* Frequency Range: 150 MHz ~~ 960 MHz
257 -* Maximum Power +22 dBm constant RF output
258 -* High sensitivity: -148 dBm
259 -* Temperature:
260 -** Storage: -55 ~~ +125℃
261 -** Operating: -40 ~~ +85℃
262 -* Humidity:
263 -** Storage: 5 ~~ 95% (Non-Condensing)
264 -** Operating: 10 ~~ 95% (Non-Condensing)
265 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
266 -* LoRa Rx current: <9 mA
267 267  
268 -== Pin Mapping & LED ==
203 +[[image:image-20220602160339-6.png||height="517" width="600"]]
269 269  
270 -== Example Send & Get Messages via LoRaWAN in PC ==
271 271  
272 -Connect the LA66 LoRa Shield to the PC
273 273  
274 -[[image:image-20220602171217-1.png||height="615" width="915"]]
207 +Check to see if TTN received the message
275 275  
276 -Open the serial port tool
209 +[[image:image-20220602160627-7.png||height="369" width="800"]]
277 277  
278 -[[image:image-20220602161617-8.png]]
279 279  
280 -[[image:image-20220602161718-9.png||height="529" width="927"]]
281 281  
282 -Press the reset switch RST on the LA66 LoRa Shield.
213 +== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
283 283  
284 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
285 285  
286 -[[image:image-20220602161935-10.png]]
216 +=== 1.8.1  Hardware and Software Connection ===
287 287  
288 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
289 289  
290 -example: AT+SENDB=01,02,8,05820802581ea0a5
291 291  
292 -[[image:image-20220602162157-11.png]]
220 +==== (% style="color:blue" %)**Overview：**(%%) ====
293 293  
294 -Check to see if TTN received the message
295 295  
296 -[[image:image-20220602162331-12.png||height="547" width="1044"]]
223 +(((
224 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
297 297  
298 -== Example Send & Get Messages via LoRaWAN in RPi ==
226 +* Send real-time location information of mobile phone to LoRaWAN network.
227 +* Check LoRaWAN network signal strengh.
228 +* Manually send messages to LoRaWAN network.
229 +)))
299 299  
300 -Connect the LA66 LoRa Shield to the RPI
301 301  
302 -[[image:image-20220602171233-2.png||height="592" width="881"]]
303 303  
304 -Log in to the RPI's terminal and connect to the serial port
305 305  
306 -[[image:image-20220602153146-3.png]]
234 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
307 307  
308 -Press the reset switch RST on the LA66 LoRa Shield.
309 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
236 +A USB to Type-C adapter is needed to connect to a Mobile phone.
310 310  
311 -[[image:image-20220602154928-5.png]]
238 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
312 312  
313 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
240 +[[image:image-20220813174353-2.png||height="360" width="313"]]
314 314  
315 -example: AT+SENDB=01,02,8,05820802581ea0a5
316 316  
317 -[[image:image-20220602160339-6.png]]
318 318  
319 -Check to see if TTN received the message
244 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
320 320  
321 -[[image:image-20220602160627-7.png||height="468" width="1013"]]
246 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
322 322  
323 -=== Install Minicom ===
248 +[[image:image-20220813173738-1.png]]
324 324  
325 -Enter the following command in the RPI terminal
326 326  
327 -apt update
328 328  
329 -[[image:image-20220602143155-1.png]]
252 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
330 330  
331 -apt install minicom
254 +Function and page introduction
332 332  
333 -[[image:image-20220602143744-2.png]]
256 +[[image:image-20220723113448-7.png||height="995" width="450"]]
334 334  
335 -=== Send PC's CPU/RAM usage to TTN via script. ===
258 +**Block Explain:**
336 336  
337 -==== Take python as an example： ====
260 +1.  Display LA66 USB LoRaWAN Module connection status
338 338  
339 -===== Preconditions: =====
262 +2.  Check and reconnect
340 340  
341 -1.LA66 USB LoRaWAN Adapter works fine
264 +3.  Turn send timestamps on or off
342 342  
343 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
266 +4.  Display LoRaWan connection status
344 344  
345 -===== Steps for usage =====
268 +5.  Check LoRaWan connection status
346 346  
347 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
270 +6.  The RSSI value of the node when the ACK is received
348 348  
349 -2.Run the script and see the TTN
272 +7.  Node's Signal Strength Icon
350 350  
351 -[[image:image-20220602115852-3.png]]
274 +8.  Configure Location Uplink Interval
352 352  
276 +9.  AT command input box
353 353  
278 +10.  Send Button:  Send input box info to LA66 USB Adapter
354 354  
355 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
280 +11.  Output Log from LA66 USB adapter
356 356  
282 +12.  clear log button
357 357  
358 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
284 +13.  exit button
359 359  
360 360  
287 +LA66 USB LoRaWAN Module not connected
361 361  
362 -== Order Info ==
289 +[[image:image-20220723110520-5.png||height="677" width="508"]]
363 363  
364 -Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
365 365  
366 -**XX**: The default frequency band
367 367  
368 -* **AS923**: LoRaWAN AS923 band
369 -* **AU915**: LoRaWAN AU915 band
370 -* **EU433**: LoRaWAN EU433 band
371 -* **EU868**: LoRaWAN EU868 band
372 -* **KR920**: LoRaWAN KR920 band
373 -* **US915**: LoRaWAN US915 band
374 -* **IN865**: LoRaWAN IN865 band
375 -* **CN470**: LoRaWAN CN470 band
376 -* **PP**: Peer to Peer LoRa Protocol
293 +Connect LA66 USB LoRaWAN Module
377 377  
378 -== Package Info ==
295 +[[image:image-20220723110626-6.png||height="681" width="511"]]
379 379  
380 -* LA66 USB LoRaWAN Adapter x 1
381 381  
382 -
298 +
299 +=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
300 +
301 +
302 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
303 +
304 +[[image:image-20220723134549-8.png]]
305 +
306 +
307 +
308 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
309 +
310 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
311 +
312 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
313 +
314 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
315 +
316 +
317 +Example output in NodeRed is as below:
318 +
319 +[[image:image-20220723144339-1.png]]
320 +
321 +
322 +
323 +== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
324 +
325 +
326 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
327 +
328 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
329 +
330 +[[image:image-20220723150132-2.png]]
331 +
332 +
333 +
334 += 2.  FAQ =
335 +
336 +
337 +== 2.1  How to Compile Source Code for LA66? ==
338 +
339 +
340 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
341 +
342 +
343 +
344 += 3.  Order Info =
345 +
346 +
347 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
348 +
349 +
350 +(% style="color:blue" %)**XXX**(%%): The default frequency band
351 +
352 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
353 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
354 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
355 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
356 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
357 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
358 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
359 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
360 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
361 +
362 +
363 += 4.  Reference =
364 +
365 +
366 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content