Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 73.1
edited by Edwin Chen
on 2022/07/03 00:12
Change comment: There is no comment for this version
To version 146.5
edited by Xiaoling
on 2022/08/16 14:51
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,41 +1,69 @@
1 -{{box cssClass="floatinginfobox" title="**Contents**"}}
1 +
2 +
3 +**Table of Contents:**
4 +
2 2  {{toc/}}
3 -{{/box}}
4 4  
5 -= LA66 LoRaWAN Module =
6 6  
7 -== What is LA66 LoRaWAN Module ==
8 8  
9 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
10 10  
11 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
12 12  
11 += 1.  LA66 USB LoRaWAN Adapter =
12 +
13 +
14 +== 1.1  Overview ==
15 +
16 +
17 +[[image:image-20220715001142-3.png||height="145" width="220"]]
18 +
19 +
20 +(((
21 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 +)))
23 +
24 +(((
25 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 +)))
27 +
28 +(((
13 13  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 +)))
14 14  
32 +(((
15 15  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 +)))
16 16  
36 +(((
17 17  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 +)))
18 18  
19 19  
20 -== Features ==
21 21  
42 +== 1.2  Features ==
43 +
44 +
45 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 +* Ultra-long RF range
22 22  * Support LoRaWAN v1.0.4 protocol
23 23  * Support peer-to-peer protocol
24 24  * TCXO crystal to ensure RF performance on low temperature
25 -* SMD Antenna pad and i-pex antenna connector
50 +* Spring RF antenna
26 26  * Available in different frequency LoRaWAN frequency bands.
27 27  * World-wide unique OTAA keys.
28 28  * AT Command via UART-TTL interface
29 29  * Firmware upgradable via UART interface
30 -* Ultra-long RF range
55 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
31 31  
32 -== Specification ==
33 33  
58 +
59 +
60 +== 1.3  Specification ==
61 +
62 +
34 34  * CPU: 32-bit 48 MHz
35 35  * Flash: 256KB
36 36  * RAM: 64KB
37 -* Input Power Range: 1.8v ~~ 3.7v
38 -* Power Consumption: < 4uA.
66 +* Input Power Range: 5v
39 39  * Frequency Range: 150 MHz ~~ 960 MHz
40 40  * Maximum Power +22 dBm constant RF output
41 41  * High sensitivity: -148 dBm
... ... @@ -47,342 +47,294 @@
47 47  ** Operating: 10 ~~ 95% (Non-Condensing)
48 48  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
49 49  * LoRa Rx current: <9 mA
50 -* I/O Voltage: 3.3v
51 51  
52 -== AT Command ==
53 53  
54 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
55 55  
56 56  
57 -== Dimension ==
82 +== 1.4  Pin Mapping & LED ==
58 58  
59 -[[image:image-20220517072526-1.png]]
84 +[[image:image-20220813183239-3.png||height="526" width="662"]]
60 60  
61 61  
62 -== Pin Mapping ==
63 63  
64 -[[image:image-20220523101537-1.png]]
88 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
65 65  
66 -== Land Pattern ==
67 67  
68 -[[image:image-20220517072821-2.png]]
91 +(((
92 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
93 +)))
69 69  
70 70  
71 -== Order Info ==
96 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
72 72  
73 -Part Number: **LA66-XXX**
74 74  
75 -**XX**: The default frequency band
99 +[[image:image-20220723100027-1.png]]
76 76  
77 -* **AS923**: LoRaWAN AS923 band
78 -* **AU915**: LoRaWAN AU915 band
79 -* **EU433**: LoRaWAN EU433 band
80 -* **EU868**: LoRaWAN EU868 band
81 -* **KR920**: LoRaWAN KR920 band
82 -* **US915**: LoRaWAN US915 band
83 -* **IN865**: LoRaWAN IN865 band
84 -* **CN470**: LoRaWAN CN470 band
85 -* **PP**: Peer to Peer LoRa Protocol
86 86  
87 -= LA66 LoRaWAN Shield =
102 +Open the serial port tool
88 88  
89 -== Overview ==
104 +[[image:image-20220602161617-8.png]]
90 90  
91 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
106 +[[image:image-20220602161718-9.png||height="457" width="800"]]
92 92  
93 93  
94 -== Features ==
95 95  
96 -* Arduino Shield base on LA66 LoRaWAN module
97 -* Support LoRaWAN v1.0.4 protocol
98 -* Support peer-to-peer protocol
99 -* TCXO crystal to ensure RF performance on low temperature
100 -* SMA connector
101 -* Available in different frequency LoRaWAN frequency bands.
102 -* World-wide unique OTAA keys.
103 -* AT Command via UART-TTL interface
104 -* Firmware upgradable via UART interface
105 -* Ultra-long RF range
110 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
106 106  
107 -== Specification ==
112 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
108 108  
109 -* CPU: 32-bit 48 MHz
110 -* Flash: 256KB
111 -* RAM: 64KB
112 -* Input Power Range: 1.8v ~~ 3.7v
113 -* Power Consumption: < 4uA.
114 -* Frequency Range: 150 MHz ~~ 960 MHz
115 -* Maximum Power +22 dBm constant RF output
116 -* High sensitivity: -148 dBm
117 -* Temperature:
118 -** Storage: -55 ~~ +125℃
119 -** Operating: -40 ~~ +85℃
120 -* Humidity:
121 -** Storage: 5 ~~ 95% (Non-Condensing)
122 -** Operating: 10 ~~ 95% (Non-Condensing)
123 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 -* LoRa Rx current: <9 mA
125 -* I/O Voltage: 3.3v
126 126  
127 -== Pin Mapping & LED ==
115 +[[image:image-20220602161935-10.png||height="498" width="800"]]
128 128  
129 -== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
130 130  
131 -== Example: Join TTN network and send an uplink message, get downlink message. ==
132 132  
133 -== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
119 +(% style="color:blue" %)**3. See Uplink Command**
134 134  
135 -== Upgrade Firmware of LA66 LoRaWAN Shield ==
121 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
136 136  
137 -=== what needs to be used ===
123 +example: AT+SENDB=01,02,8,05820802581ea0a5
138 138  
139 -1.LA66 LoRaWAN Shield that needs to be upgraded
125 +[[image:image-20220602162157-11.png||height="497" width="800"]]
140 140  
141 -2.Arduino
142 142  
143 -3.USB TO TTL
144 144  
145 -[[image:image-20220602100052-2.png]]
129 +(% style="color:blue" %)**4. Check to see if TTN received the message**
146 146  
147 -=== Wiring Schematic ===
131 +[[image:image-20220602162331-12.png||height="420" width="800"]]
148 148  
149 -[[image:image-20220602101311-3.png]]
150 150  
151 -LA66 LoRaWAN Shield  >>>>>>>>>>>>USB TTL
152 152  
153 -GND  >>>>>>>>>>>>GND
135 +== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
154 154  
155 -TXD  >>>>>>>>>>>>TXD
156 156  
157 -RXD  >>>>>>>>>>>>RXD
138 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
158 158  
159 -JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
140 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
160 160  
161 -Connect to the PC after connecting the wires
142 +(% style="color:red" %)**Preconditions:**
162 162  
163 -[[image:image-20220602102240-4.png]]
144 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
164 164  
165 -=== Upgrade steps ===
146 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
166 166  
167 -==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
168 168  
169 -[[image:image-20220602102824-5.png]]
170 170  
171 -==== Press the RST switch on the LA66 LoRaWAN Shield once ====
150 +(% style="color:blue" %)**Steps for usage:**
172 172  
173 -[[image:image-20220602104701-12.png]]
152 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
174 174  
175 -==== Open the upgrade application software ====
154 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
176 176  
177 -Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
156 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
178 178  
179 -[[image:image-20220602103227-6.png]]
180 180  
181 -[[image:image-20220602103357-7.png]]
182 182  
183 -===== Select the COM port corresponding to USB TTL =====
160 +== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
184 184  
185 -[[image:image-20220602103844-8.png]]
186 186  
187 -===== Select the bin file to burn =====
163 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
188 188  
189 -[[image:image-20220602104144-9.png]]
190 190  
191 -[[image:image-20220602104251-10.png]]
166 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
192 192  
193 -[[image:image-20220602104402-11.png]]
168 +[[image:image-20220723100439-2.png]]
194 194  
195 -===== Click to start the download =====
196 196  
197 -[[image:image-20220602104923-13.png]]
198 198  
199 -===== The following figure appears to prove that the burning is in progress =====
172 +(% style="color:blue" %)**2. Install Minicom in RPi.**
200 200  
201 -[[image:image-20220602104948-14.png]]
174 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
202 202  
203 -===== The following picture appears to prove that the burning is successful =====
176 + (% style="background-color:yellow" %)**apt update**
204 204  
205 -[[image:image-20220602105251-15.png]]
178 + (% style="background-color:yellow" %)**apt install minicom**
206 206  
207 207  
208 -== Order Info ==
181 +Use minicom to connect to the RPI's terminal
209 209  
210 -Part Number: **LA66-LoRaWAN-Shield-XXX**
183 +[[image:image-20220602153146-3.png||height="439" width="500"]]
211 211  
212 -**XX**: The default frequency band
213 213  
214 -* **AS923**: LoRaWAN AS923 band
215 -* **AU915**: LoRaWAN AU915 band
216 -* **EU433**: LoRaWAN EU433 band
217 -* **EU868**: LoRaWAN EU868 band
218 -* **KR920**: LoRaWAN KR920 band
219 -* **US915**: LoRaWAN US915 band
220 -* **IN865**: LoRaWAN IN865 band
221 -* **CN470**: LoRaWAN CN470 band
222 -* **PP**: Peer to Peer LoRa Protocol
223 223  
224 -== Package Info ==
187 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
225 225  
226 -* LA66 LoRaWAN Shield x 1
227 -* RF Antenna x 1
189 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
228 228  
229 229  
192 +[[image:image-20220602154928-5.png||height="436" width="500"]]
230 230  
231 231  
232 -= LA66 USB LoRaWAN Adapter =
233 233  
234 -== Overview ==
196 +(% style="color:blue" %)**4. Send Uplink message**
235 235  
236 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
198 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
237 237  
200 +example: AT+SENDB=01,02,8,05820802581ea0a5
238 238  
239 -== Features ==
240 240  
241 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
242 -* Ultra-long RF range
243 -* Support LoRaWAN v1.0.4 protocol
244 -* Support peer-to-peer protocol
245 -* TCXO crystal to ensure RF performance on low temperature
246 -* Spring RF antenna
247 -* Available in different frequency LoRaWAN frequency bands.
248 -* World-wide unique OTAA keys.
249 -* AT Command via UART-TTL interface
250 -* Firmware upgradable via UART interface
203 +[[image:image-20220602160339-6.png||height="517" width="600"]]
251 251  
252 252  
253 253  
254 -== Specification ==
207 +Check to see if TTN received the message
255 255  
256 -* CPU: 32-bit 48 MHz
257 -* Flash: 256KB
258 -* RAM: 64KB
259 -* Input Power Range: 5v
260 -* Frequency Range: 150 MHz ~~ 960 MHz
261 -* Maximum Power +22 dBm constant RF output
262 -* High sensitivity: -148 dBm
263 -* Temperature:
264 -** Storage: -55 ~~ +125℃
265 -** Operating: -40 ~~ +85℃
266 -* Humidity:
267 -** Storage: 5 ~~ 95% (Non-Condensing)
268 -** Operating: 10 ~~ 95% (Non-Condensing)
269 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
270 -* LoRa Rx current: <9 mA
209 +[[image:image-20220602160627-7.png||height="369" width="800"]]
271 271  
272 272  
273 273  
274 -== Pin Mapping & LED ==
213 +== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
275 275  
276 -== Example Send & Get Messages via LoRaWAN in PC ==
277 277  
278 -Connect the LA66 LoRa Shield to the PC
216 +=== 1.8.1  Hardware and Software Connection ===
279 279  
280 -[[image:image-20220602171217-1.png||height="615" width="915"]]
281 281  
282 -Open the serial port tool
283 283  
284 -[[image:image-20220602161617-8.png]]
220 +==== (% style="color:blue" %)**Overview：**(%%) ====
285 285  
286 -[[image:image-20220602161718-9.png||height="529" width="927"]]
287 287  
288 -Press the reset switch RST on the LA66 LoRa Shield.
223 +(((
224 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
289 289  
290 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
226 +* Send real-time location information of mobile phone to LoRaWAN network.
227 +* Check LoRaWAN network signal strengh.
228 +* Manually send messages to LoRaWAN network.
229 +)))
291 291  
292 -[[image:image-20220602161935-10.png]]
293 293  
294 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
295 295  
296 -example: AT+SENDB=01,02,8,05820802581ea0a5
297 297  
298 -[[image:image-20220602162157-11.png]]
234 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
299 299  
300 -Check to see if TTN received the message
236 +A USB to Type-C adapter is needed to connect to a Mobile phone.
301 301  
302 -[[image:image-20220602162331-12.png||height="547" width="1044"]]
238 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
303 303  
304 -== Example Send & Get Messages via LoRaWAN in RPi ==
240 +[[image:image-20220813174353-2.png||height="360" width="313"]]
305 305  
306 -Connect the LA66 LoRa Shield to the RPI
307 307  
308 -[[image:image-20220602171233-2.png||height="592" width="881"]]
309 309  
310 -Log in to the RPI's terminal and connect to the serial port
244 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
311 311  
312 -[[image:image-20220602153146-3.png]]
246 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
313 313  
314 -Press the reset switch RST on the LA66 LoRa Shield.
315 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
248 +[[image:image-20220813173738-1.png]]
316 316  
317 -[[image:image-20220602154928-5.png]]
318 318  
319 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
320 320  
321 -example: AT+SENDB=01,02,8,05820802581ea0a5
252 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
322 322  
323 -[[image:image-20220602160339-6.png]]
254 +Function and page introduction
324 324  
325 -Check to see if TTN received the message
256 +[[image:image-20220723113448-7.png||height="995" width="450"]]
326 326  
327 -[[image:image-20220602160627-7.png||height="468" width="1013"]]
258 +**Block Explain:**
328 328  
329 -=== Install Minicom ===
260 +1.  Display LA66 USB LoRaWAN Module connection status
330 330  
331 -Enter the following command in the RPI terminal
262 +2.  Check and reconnect
332 332  
333 -apt update
264 +3.  Turn send timestamps on or off
334 334  
335 -[[image:image-20220602143155-1.png]]
266 +4.  Display LoRaWan connection status
336 336  
337 -apt install minicom
268 +5.  Check LoRaWan connection status
338 338  
339 -[[image:image-20220602143744-2.png]]
270 +6.  The RSSI value of the node when the ACK is received
340 340  
341 -=== Send PC's CPU/RAM usage to TTN via script. ===
272 +7.  Node's Signal Strength Icon
342 342  
343 -==== Take python as an example： ====
274 +8.  Configure Location Uplink Interval
344 344  
345 -===== Preconditions: =====
276 +9.  AT command input box
346 346  
347 -1.LA66 USB LoRaWAN Adapter works fine
278 +10.  Send Button:  Send input box info to LA66 USB Adapter
348 348  
349 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
280 +11.  Output Log from LA66 USB adapter
350 350  
351 -===== Steps for usage =====
282 +12.  clear log button
352 352  
353 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
284 +13.  exit button
354 354  
355 -2.Run the script and see the TTN
356 356  
357 -[[image:image-20220602115852-3.png]]
287 +LA66 USB LoRaWAN Module not connected
358 358  
289 +[[image:image-20220723110520-5.png||height="677" width="508"]]
359 359  
360 360  
361 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
362 362  
293 +Connect LA66 USB LoRaWAN Module
363 363  
364 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
295 +[[image:image-20220723110626-6.png||height="681" width="511"]]
365 365  
366 366  
367 367  
368 -== Order Info ==
299 +=== 1.8.2 Send data to TTNv3 and plot location info in Node-Red ===
369 369  
370 -Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
371 371  
372 -**XX**: The default frequency band
302 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
373 373  
374 -* **AS923**: LoRaWAN AS923 band
375 -* **AU915**: LoRaWAN AU915 band
376 -* **EU433**: LoRaWAN EU433 band
377 -* **EU868**: LoRaWAN EU868 band
378 -* **KR920**: LoRaWAN KR920 band
379 -* **US915**: LoRaWAN US915 band
380 -* **IN865**: LoRaWAN IN865 band
381 -* **CN470**: LoRaWAN CN470 band
382 -* **PP**: Peer to Peer LoRa Protocol
304 +[[image:image-20220723134549-8.png]]
383 383  
384 -== Package Info ==
385 385  
386 -* LA66 USB LoRaWAN Adapter x 1
387 387  
388 -
308 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
309 +
310 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
311 +
312 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
313 +
314 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
315 +
316 +
317 +Example output in NodeRed is as below:
318 +
319 +[[image:image-20220723144339-1.png]]
320 +
321 +
322 +
323 +== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
324 +
325 +
326 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
327 +
328 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
329 +
330 +[[image:image-20220723150132-2.png]]
331 +
332 +
333 +
334 += 2.  FAQ =
335 +
336 +
337 +== 2.1  How to Compile Source Code for LA66? ==
338 +
339 +
340 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
341 +
342 +
343 +
344 += 3.  Order Info =
345 +
346 +
347 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
348 +
349 +
350 +(% style="color:blue" %)**XXX**(%%): The default frequency band
351 +
352 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
353 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
354 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
355 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
356 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
357 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
358 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
359 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
360 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
361 +
362 +
363 +
364 +
365 += 4.  Reference =
366 +
367 +
368 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content