Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 63.1
edited by Herong Lu
on 2022/06/02 17:23
Change comment: There is no comment for this version
To version 161.1
edited by Bei Jinggeng
on 2023/06/09 18:08
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Lu
1 +XWiki.Bei
Content
... ... @@ -1,259 +1,509 @@
1 -{{box cssClass="floatinginfobox" title="**Contents**"}}
1 +
2 +
3 +**Table of Contents:**
4 +
2 2  {{toc/}}
3 -{{/box}}
4 4  
5 -= LA66 LoRaWAN Module =
6 6  
7 -== What is LA66 LoRaWAN Module ==
8 8  
9 -**Dragino LA66** is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRa and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
10 10  
11 -**LA66 **is a ready-to-use module which includes the LoRaWAN v1.0.4 protocol. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
12 12  
13 -**Each LA66 **module includes a world unique OTAA key for LoRaWAN registration.
11 += 1.  LA66 USB LoRaWAN Adapter =
14 14  
13 +== 1.1  Overview ==
15 15  
16 16  
17 -== Specification ==
16 +[[image:image-20220715001142-3.png||height="145" width="220"]]
18 18  
19 -[[image:image-20220517072526-1.png]]
20 20  
21 -Input Power Range: 1.8v ~~ 3.7v
19 +(((
20 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
21 +)))
22 22  
23 -Power Consumption: < 4uA.
23 +(((
24 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 +)))
24 24  
25 -Frequency Range: 150 MHz ~~ 960 MHz
27 +(((
28 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
29 +)))
26 26  
27 -Maximum Power +22 dBm constant RF output
31 +(((
32 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
33 +)))
28 28  
29 -High sensitivity: -148 dBm
35 +(((
36 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
37 +)))
30 30  
31 -Temperature:
32 32  
33 -* Storage: -55 ~~ +125℃
34 -* Operating: -40 ~~ +85℃
40 +== 1.2  Features ==
35 35  
36 -Humidity:
37 37  
38 -* Storage: 5 ~~ 95% (Non-Condensing)
39 -* Operating: 10 ~~ 95% (Non-Condensing)
43 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 +* Ultra-long RF range
45 +* Support LoRaWAN v1.0.4 protocol
46 +* Support peer-to-peer protocol
47 +* TCXO crystal to ensure RF performance on low temperature
48 +* Spring RF antenna
49 +* Available in different frequency LoRaWAN frequency bands.
50 +* World-wide unique OTAA keys.
51 +* AT Command via UART-TTL interface
52 +* Firmware upgradable via UART interface
53 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
40 40  
41 -LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
55 +== 1.3  Specification ==
42 42  
43 -LoRa Rx current: <9 mA
44 44  
45 -I/O Voltage: 3.3v
58 +* CPU: 32-bit 48 MHz
59 +* Flash: 256KB
60 +* RAM: 64KB
61 +* Input Power Range: 5v
62 +* Frequency Range: 150 MHz ~~ 960 MHz
63 +* Maximum Power +22 dBm constant RF output
64 +* High sensitivity: -148 dBm
65 +* Temperature:
66 +** Storage: -55 ~~ +125℃
67 +** Operating: -40 ~~ +85℃
68 +* Humidity:
69 +** Storage: 5 ~~ 95% (Non-Condensing)
70 +** Operating: 10 ~~ 95% (Non-Condensing)
71 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
72 +* LoRa Rx current: <9 mA
46 46  
74 +== 1.4  Pin Mapping & LED ==
47 47  
48 -== AT Command ==
49 49  
50 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
77 +[[image:image-20220813183239-3.png||height="526" width="662"]]
51 51  
52 52  
53 -== Pin Mapping ==
80 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
54 54  
55 -[[image:image-20220523101537-1.png]]
56 56  
57 -== Land Pattern ==
83 +(((
84 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
85 +)))
58 58  
59 -[[image:image-20220517072821-2.png]]
60 60  
88 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
61 61  
62 -== Part Number ==
63 63  
64 -Part Number: **LA66-XXX**
91 +[[image:image-20220723100027-1.png]]
65 65  
66 -**XX**: The default frequency band
67 67  
68 -* **AS923**: LoRaWAN AS923 band
69 -* **AU915**: LoRaWAN AU915 band
70 -* **EU433**: LoRaWAN EU433 band
71 -* **EU868**: LoRaWAN EU868 band
72 -* **KR920**: LoRaWAN KR920 band
73 -* **US915**: LoRaWAN US915 band
74 -* **IN865**: LoRaWAN IN865 band
75 -* **CN470**: LoRaWAN CN470 band
94 +Open the serial port tool
76 76  
77 -= LA66 LoRaWAN Shield =
96 +[[image:image-20220602161617-8.png]]
78 78  
79 -LA66 LoRaWAN Shield is the Arduino Breakout PCB to fast test the features of LA66 module and turn Arduino to support LoRaWAN.
80 80  
81 -== Pin Mapping & LED ==
99 +[[image:image-20220602161718-9.png||height="457" width="800"]]
82 82  
83 -== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
84 84  
85 -== Example: Join TTN network and send an uplink message, get downlink message. ==
86 86  
87 -== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
103 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
88 88  
89 -== Upgrade Firmware of LA66 LoRaWAN Shield ==
90 90  
91 -=== what needs to be used ===
106 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
92 92  
93 -1.LA66 LoRaWAN Shield that needs to be upgraded
94 94  
95 -2.Arduino
109 +[[image:image-20220602161935-10.png||height="498" width="800"]]
96 96  
97 -3.USB TO TTL
98 98  
99 -[[image:image-20220602100052-2.png]]
100 100  
101 -=== Wiring Schematic ===
113 +(% style="color:blue" %)**3.  See Uplink Command**
102 102  
103 -[[image:image-20220602101311-3.png]]
104 104  
105 -LA66 LoRaWAN Shield  >>>>>>>>>>>>USB TTL
116 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
106 106  
107 -GND  >>>>>>>>>>>>GND
118 +example: AT+SENDB=01,02,8,05820802581ea0a5
108 108  
109 -TXD  >>>>>>>>>>>>TXD
120 +[[image:image-20220602162157-11.png||height="497" width="800"]]
110 110  
111 -RXD  >>>>>>>>>>>>RXD
112 112  
113 -JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
114 114  
115 -Connect to the PC after connecting the wires
124 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
116 116  
117 -[[image:image-20220602102240-4.png]]
118 118  
119 -=== Upgrade steps ===
127 +[[image:image-20220817093644-1.png]]
120 120  
121 -==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
122 122  
123 -[[image:image-20220602102824-5.png]]
130 +== 1.6  Example: How to join helium ==
124 124  
125 -==== Press the RST switch on the LA66 LoRaWAN Shield once ====
126 126  
127 -[[image:image-20220602104701-12.png]]
128 128  
129 -==== Open the upgrade application software ====
134 +(% style="color:blue" %)**1.  Create a new device.**
130 130  
131 -Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
132 132  
133 -[[image:image-20220602103227-6.png]]
137 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
134 134  
135 -[[image:image-20220602103357-7.png]]
136 136  
137 -===== Select the COM port corresponding to USB TTL =====
138 138  
139 -[[image:image-20220602103844-8.png]]
141 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
140 140  
141 -===== Select the bin file to burn =====
142 142  
143 -[[image:image-20220602104144-9.png]]
144 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
144 144  
145 -[[image:image-20220602104251-10.png]]
146 146  
147 -[[image:image-20220602104402-11.png]]
148 148  
149 -===== Click to start the download =====
148 +(% style="color:blue" %)**3.  Use AT commands.**
150 150  
151 -[[image:image-20220602104923-13.png]]
152 152  
153 -===== The following figure appears to prove that the burning is in progress =====
151 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
154 154  
155 -[[image:image-20220602104948-14.png]]
156 156  
157 -===== The following picture appears to prove that the burning is successful =====
158 158  
159 -[[image:image-20220602105251-15.png]]
155 +(% style="color:blue" %)**4.  Use the serial port tool**
160 160  
161 -= LA66 USB LoRaWAN Adapter =
162 162  
163 -LA66 USB LoRaWAN Adapter is the USB Adapter for LA66, it combines a USB TTL Chip and LA66 module which can easy to test the LoRaWAN feature by using PC or embedded device which has USB Interface.
158 +[[image:image-20220909151517-2.png||height="543" width="708"]]
164 164  
165 -Before use, please make sure that the computer has installed the CP2102 driver
166 166  
167 -== Pin Mapping & LED ==
168 168  
169 -== Example Send & Get Messages via LoRaWAN in PC ==
162 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
170 170  
171 -Connect the LA66 LoRa Shield to the PC
172 172  
173 -[[image:image-20220602171217-1.png||height="615" width="915"]]
165 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
174 174  
175 -Open the serial port tool
176 176  
177 -[[image:image-20220602161617-8.png]]
178 178  
179 -[[image:image-20220602161718-9.png||height="529" width="927"]]
169 +(% style="color:blue" %)**6.  Network successfully.**
180 180  
181 -Press the reset switch RST on the LA66 LoRa Shield.
182 182  
183 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
172 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
184 184  
185 -[[image:image-20220602161935-10.png]]
186 186  
187 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
188 188  
189 -example: AT+SENDB=01,02,8,05820802581ea0a5
176 +(% style="color:blue" %)**7.  Send uplink using command**
190 190  
191 -[[image:image-20220602162157-11.png]]
192 192  
193 -Check to see if TTN received the message
179 +[[image:image-20220912085244-1.png]]
194 194  
195 -[[image:image-20220602162331-12.png||height="547" width="1044"]]
196 196  
197 -== Example Send & Get Messages via LoRaWAN in RPi ==
182 +[[image:image-20220912085307-2.png]]
198 198  
199 -Connect the LA66 LoRa Shield to the RPI
200 200  
201 -[[image:image-20220602171233-2.png||height="592" width="881"]]
202 202  
203 -Log in to the RPI's terminal and connect to the serial port
186 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
204 204  
205 -[[image:image-20220602153146-3.png]]
206 206  
207 -Press the reset switch RST on the LA66 LoRa Shield.
208 -The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
189 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
209 209  
210 -[[image:image-20220602154928-5.png]]
211 211  
212 -send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
192 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
213 213  
194 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
195 +
196 +
197 +(% style="color:red" %)**Preconditions:**
198 +
199 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
200 +
201 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
202 +
203 +
204 +
205 +(% style="color:blue" %)**Steps for usage:**
206 +
207 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
208 +
209 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
210 +
211 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
212 +
213 +
214 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
215 +
216 +
217 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
218 +
219 +
220 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
221 +
222 +
223 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
224 +
225 +
226 +[[image:image-20220723100439-2.png]]
227 +
228 +
229 +
230 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
231 +
232 +
233 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
234 +
235 + (% style="background-color:yellow" %)**apt update**
236 +
237 + (% style="background-color:yellow" %)**apt install minicom**
238 +
239 +
240 +Use minicom to connect to the RPI's terminal
241 +
242 +[[image:image-20220602153146-3.png||height="439" width="500"]]
243 +
244 +
245 +
246 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
247 +
248 +
249 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
250 +
251 +
252 +[[image:image-20220602154928-5.png||height="436" width="500"]]
253 +
254 +
255 +
256 +(% style="color:blue" %)**4.  Send Uplink message**
257 +
258 +
259 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
260 +
214 214  example: AT+SENDB=01,02,8,05820802581ea0a5
215 215  
216 -[[image:image-20220602160339-6.png]]
217 217  
264 +[[image:image-20220602160339-6.png||height="517" width="600"]]
265 +
266 +
267 +
218 218  Check to see if TTN received the message
219 219  
220 -[[image:image-20220602160627-7.png||height="468" width="1013"]]
221 221  
222 -=== Install Minicom ===
271 +[[image:image-20220602160627-7.png||height="369" width="800"]]
223 223  
224 -Enter the following command in the RPI terminal
225 225  
226 -apt update
274 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
227 227  
228 -[[image:image-20220602143155-1.png]]
276 +=== 1.9.1  Hardware and Software Connection ===
229 229  
230 -apt install minicom
231 231  
232 -[[image:image-20220602143744-2.png]]
233 233  
234 -=== Send PC's CPU/RAM usage to TTN via script. ===
280 +==== (% style="color:blue" %)**Overview：**(%%) ====
235 235  
236 -==== Take python as an example： ====
237 237  
238 -===== Preconditions: =====
283 +(((
284 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
239 239  
240 -1.LA66 USB LoRaWAN Adapter works fine
286 +* Send real-time location information of mobile phone to LoRaWAN network.
287 +* Check LoRaWAN network signal strengh.
288 +* Manually send messages to LoRaWAN network.
289 +)))
241 241  
242 -2.LA66 USB LoRaWAN Adapter  is registered with TTN
243 243  
244 -===== Steps for usage =====
245 245  
246 -1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
247 247  
248 -2.Run the script and see the TTN
294 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
249 249  
250 -[[image:image-20220602115852-3.png]]
251 251  
297 +A USB to Type-C adapter is needed to connect to a Mobile phone.
252 252  
299 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
253 253  
254 -== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
301 +[[image:image-20220813174353-2.png||height="360" width="313"]]
255 255  
256 256  
257 -== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
258 258  
305 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
306 +
307 +
308 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
309 +
310 +
311 +[[image:image-20220813173738-1.png]]
312 +
313 +
314 +
315 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
316 +
317 +
318 +Function and page introduction
319 +
320 +
321 +[[image:image-20220723113448-7.png||height="995" width="450"]]
322 +
323 +
324 +**Block Explain:**
325 +
326 +1.  Display LA66 USB LoRaWAN Module connection status
327 +
328 +2.  Check and reconnect
329 +
330 +3.  Turn send timestamps on or off
331 +
332 +4.  Display LoRaWan connection status
333 +
334 +5.  Check LoRaWan connection status
335 +
336 +6.  The RSSI value of the node when the ACK is received
337 +
338 +7.  Node's Signal Strength Icon
339 +
340 +8.  Configure Location Uplink Interval
341 +
342 +9.  AT command input box
343 +
344 +10.  Send Button:  Send input box info to LA66 USB Adapter
345 +
346 +11.  Output Log from LA66 USB adapter
347 +
348 +12.  clear log button
349 +
350 +13.  exit button
351 +
352 +
353 +
354 +LA66 USB LoRaWAN Module not connected
355 +
356 +
357 +[[image:image-20220723110520-5.png||height="677" width="508"]]
358 +
359 +
360 +
361 +Connect LA66 USB LoRaWAN Module
362 +
363 +
364 +[[image:image-20220723110626-6.png||height="681" width="511"]]
365 +
366 +
367 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
368 +
369 +
370 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
371 +
372 +
373 +[[image:image-20220723134549-8.png]]
374 +
375 +
376 +
377 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
378 +
379 +
380 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
381 +
382 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
383 +
384 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
385 +
386 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
387 +
388 +
389 +Example output in NodeRed is as below:
390 +
391 +[[image:image-20220723144339-1.png]]
392 +
393 +
394 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
395 +
396 +
397 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
398 +
399 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
400 +
401 +(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
402 +
403 +[[image:image-20220723150132-2.png]]
404 +
405 +==== ** Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** ====
406 +
407 +**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
408 +
409 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
410 +
411 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
412 +
413 +**2.  Select the COM port corresponding to USB TTL**
414 +
415 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
416 +
417 +**3.  Select the bin file to burn**
418 +
419 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
420 +
421 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
422 +
423 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
424 +
425 +**4.  Click to start the download**
426 +
427 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
428 +
429 +**5.  Check update process**
430 +
431 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
432 +
433 +**The following picture shows that the burning is successful**
434 +
435 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
436 +
437 += 2.  FAQ =
438 +
439 +== 2.1  How to Compile Source Code for LA66? ==
440 +
441 +
442 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
443 +
444 +
445 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
446 +
447 +
448 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
449 +
450 +
451 +== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
452 +
453 +Set the AT+COMMAND:
454 +
455 +AT+UUID=666666666666
456 +
457 +
458 += 3.  Order Info =
459 +
460 +
461 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
462 +
463 +
464 +(% style="color:blue" %)**XXX**(%%): The default frequency band
465 +
466 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
467 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
468 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
469 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
470 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
471 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
472 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
473 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
474 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
475 +
476 += 4.  Reference =
477 +
478 +
479 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
480 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
481 +
482 += 5.  FCC Statement =
483 +
484 +
485 +(% style="color:red" %)**FCC Caution:**
486 +
487 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
488 +
489 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
490 +
491 +
492 +(% style="color:red" %)**IMPORTANT NOTE: **
493 +
494 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
495 +
496 +—Reorient or relocate the receiving antenna.
497 +
498 +—Increase the separation between the equipment and receiver.
499 +
500 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
501 +
502 +—Consult the dealer or an experienced radio/TV technician for help.
503 +
504 +
505 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
506 +
507 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
508 +
259 259  
image-20220715000242-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content