Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 174.3
edited by Xiaoling
on 2024/03/20 14:12
Change comment: There is no comment for this version
To version 134.2
edited by Xiaoling
on 2022/07/26 10:28
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -6,25 +6,34 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
15 15  
16 -[[image:image-20220715001142-3.png||height="194" width="294"]][[image:image-20240101111030-2.png]]
20 +(((
21 +
22 +)))
17 17  
18 -
19 19  (((
20 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
21 21  )))
27 +)))
22 22  
23 23  (((
30 +(((
24 24  (% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 25  )))
33 +)))
26 26  
27 27  (((
36 +(((
28 28  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
29 29  )))
30 30  
... ... @@ -31,34 +31,35 @@
31 31  (((
32 32  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
33 33  )))
43 +)))
34 34  
35 35  (((
46 +(((
36 36  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
37 37  )))
49 +)))
38 38  
39 39  
52 +
40 40  == 1.2  Features ==
41 41  
42 -
43 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 -* Ultra-long RF range
45 -* Support LoRaWAN v1.0.3 protocol
55 +* Support LoRaWAN v1.0.4 protocol
46 46  * Support peer-to-peer protocol
47 47  * TCXO crystal to ensure RF performance on low temperature
48 -* Spring RF antenna
58 +* SMD Antenna pad and i-pex antenna connector
49 49  * Available in different frequency LoRaWAN frequency bands.
50 50  * World-wide unique OTAA keys.
51 51  * AT Command via UART-TTL interface
52 52  * Firmware upgradable via UART interface
53 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
63 +* Ultra-long RF range
54 54  
55 55  == 1.3  Specification ==
56 56  
57 -
58 58  * CPU: 32-bit 48 MHz
59 59  * Flash: 256KB
60 60  * RAM: 64KB
61 -* Input Power Range: 5v
70 +* Input Power Range: 1.8v ~~ 3.7v
71 +* Power Consumption: < 4uA.
62 62  * Frequency Range: 150 MHz ~~ 960 MHz
63 63  * Maximum Power +22 dBm constant RF output
64 64  * High sensitivity: -148 dBm
... ... @@ -70,426 +70,615 @@
70 70  ** Operating: 10 ~~ 95% (Non-Condensing)
71 71  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
72 72  * LoRa Rx current: <9 mA
83 +* I/O Voltage: 3.3v
73 73  
74 -== 1.4  Pin Mapping & LED ==
85 +== 1.4  AT Command ==
75 75  
76 76  
77 -[[image:image-20220813183239-3.png||height="526" width="662"]]
88 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
78 78  
79 79  
80 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
81 81  
92 +== 1.5  Dimension ==
82 82  
94 +[[image:image-20220718094750-3.png]]
95 +
96 +
97 +
98 +== 1.6  Pin Mapping ==
99 +
100 +[[image:image-20220720111850-1.png]]
101 +
102 +
103 +
104 +== 1.7  Land Pattern ==
105 +
106 +[[image:image-20220517072821-2.png]]
107 +
108 +
109 +
110 += 2.  LA66 LoRaWAN Shield =
111 +
112 +
113 +== 2.1  Overview ==
114 +
115 +
83 83  (((
84 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
117 +[[image:image-20220715000826-2.png||height="145" width="220"]]
85 85  )))
86 86  
87 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
120 +(((
121 +
122 +)))
88 88  
89 -[[image:image-20220723100027-1.png]]
124 +(((
125 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
126 +)))
90 90  
128 +(((
129 +(((
130 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
131 +)))
132 +)))
91 91  
92 -Open the serial port tool
134 +(((
135 +(((
136 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
137 +)))
138 +)))
93 93  
94 -[[image:image-20220602161617-8.png]]
140 +(((
141 +(((
142 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
143 +)))
144 +)))
95 95  
146 +(((
147 +(((
148 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
149 +)))
150 +)))
96 96  
97 -[[image:image-20220602161718-9.png||height="457" width="800"]]
98 98  
99 99  
100 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
154 +== 2.2  Features ==
101 101  
102 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
156 +* Arduino Shield base on LA66 LoRaWAN module
157 +* Support LoRaWAN v1.0.4 protocol
158 +* Support peer-to-peer protocol
159 +* TCXO crystal to ensure RF performance on low temperature
160 +* SMA connector
161 +* Available in different frequency LoRaWAN frequency bands.
162 +* World-wide unique OTAA keys.
163 +* AT Command via UART-TTL interface
164 +* Firmware upgradable via UART interface
165 +* Ultra-long RF range
103 103  
104 -[[image:image-20220602161935-10.png||height="498" width="800"]]
167 +== 2.3  Specification ==
105 105  
169 +* CPU: 32-bit 48 MHz
170 +* Flash: 256KB
171 +* RAM: 64KB
172 +* Input Power Range: 1.8v ~~ 3.7v
173 +* Power Consumption: < 4uA.
174 +* Frequency Range: 150 MHz ~~ 960 MHz
175 +* Maximum Power +22 dBm constant RF output
176 +* High sensitivity: -148 dBm
177 +* Temperature:
178 +** Storage: -55 ~~ +125℃
179 +** Operating: -40 ~~ +85℃
180 +* Humidity:
181 +** Storage: 5 ~~ 95% (Non-Condensing)
182 +** Operating: 10 ~~ 95% (Non-Condensing)
183 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
184 +* LoRa Rx current: <9 mA
185 +* I/O Voltage: 3.3v
106 106  
107 -(% style="color:blue" %)**3.  See Uplink Command**
187 +== 2.4  LED ==
108 108  
109 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
189 +~1. The LED lights up red when there is an upstream data packet
190 +2. When the network is successfully connected, the green light will be on for 5 seconds
191 +3. Purple light on when receiving downlink data packets
110 110  
111 -example: AT+SENDB=01,02,8,05820802581ea0a5
112 112  
113 -[[image:image-20220602162157-11.png||height="497" width="800"]]
194 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
114 114  
196 +Show connection diagram：
115 115  
116 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
198 +[[image:image-20220723170210-2.png||height="908" width="681"]]
117 117  
118 -[[image:image-20220817093644-1.png]]
200 +1.open Arduino IDE
119 119  
202 +[[image:image-20220723170545-4.png]]
120 120  
121 -== 1.6  Example: How to join helium ==
204 +2.Open project
122 122  
206 +[[image:image-20220723170750-5.png||height="533" width="930"]]
123 123  
124 -(% style="color:blue" %)**1.  Create a new device.**
208 +3.Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload
125 125  
126 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
210 +[[image:image-20220723171228-6.png]]
127 127  
212 +4.After the upload is successful, open the serial port monitoring and send the AT command
128 128  
129 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
214 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
130 130  
131 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
216 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
132 132  
218 +1.Open project
133 133  
134 -(% style="color:blue" %)**3.  Use AT commands.**
220 +[[image:image-20220723172502-8.png]]
135 135  
136 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
222 +2.Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
137 137  
224 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
138 138  
139 -(% style="color:blue" %)**4.  Use the serial port tool**
140 140  
141 -[[image:image-20220909151517-2.png||height="543" width="708"]]
142 142  
228 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
143 143  
144 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
145 145  
146 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
231 +**1.  Open project**
147 147  
148 148  
149 -(% style="color:blue" %)**6.  Network successfully.**
234 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
150 150  
151 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
152 152  
237 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
153 153  
154 -(% style="color:blue" %)**7.  Send uplink using command**
155 155  
156 -[[image:image-20220912085244-1.png]]
157 157  
158 -[[image:image-20220912085307-2.png]]
241 +**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
159 159  
160 160  
161 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
244 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
162 162  
163 163  
164 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
165 165  
248 +**3.  Integration into Node-red via TTNV3**
166 166  
167 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
250 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
168 168  
169 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
252 +[[image:image-20220723175700-12.png||height="602" width="995"]]
170 170  
171 171  
172 -(% style="color:red" %)**Preconditions:**
173 173  
174 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
256 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
175 175  
176 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
177 177  
259 +=== 2.8.1  Items needed for update ===
178 178  
179 -(% style="color:blue" %)**Steps for usage:**
180 180  
181 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
262 +1. LA66 LoRaWAN Shield
263 +1. Arduino
264 +1. USB TO TTL Adapter
182 182  
183 -(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
266 +[[image:image-20220602100052-2.png||height="385" width="600"]]
184 184  
185 -(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
186 186  
269 +=== 2.8.2  Connection ===
187 187  
188 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
189 189  
272 +[[image:image-20220602101311-3.png||height="276" width="600"]]
190 190  
191 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
192 192  
275 +(((
276 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
277 +)))
193 193  
194 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
279 +(((
280 +(% style="background-color:yellow" %)**GND  <-> GND
281 +TXD  <->  TXD
282 +RXD  <->  RXD**
283 +)))
195 195  
196 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
197 197  
198 -[[image:image-20220723100439-2.png]]
286 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
199 199  
288 +Connect USB TTL Adapter to PC after connecting the wires
200 200  
201 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
202 202  
203 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
291 +[[image:image-20220602102240-4.png||height="304" width="600"]]
204 204  
205 - (% style="background-color:yellow" %)**apt update**
206 206  
207 - (% style="background-color:yellow" %)**apt install minicom**
294 +=== 2.8.3  Upgrade steps ===
208 208  
209 -Use minicom to connect to the RPI's terminal
210 210  
211 -[[image:image-20220602153146-3.png||height="439" width="500"]]
297 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
212 212  
213 213  
214 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
300 +[[image:image-20220602102824-5.png||height="306" width="600"]]
215 215  
216 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
217 217  
218 -[[image:image-20220602154928-5.png||height="436" width="500"]]
219 219  
304 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
220 220  
221 -(% style="color:blue" %)**4.  Send Uplink message**
222 222  
223 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
307 +[[image:image-20220602104701-12.png||height="285" width="600"]]
224 224  
225 -example: AT+SENDB=01,02,8,05820802581ea0a5
226 226  
227 -[[image:image-20220602160339-6.png||height="517" width="600"]]
228 228  
311 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
229 229  
230 -Check to see if TTN received the message
231 231  
314 +(((
315 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
316 +)))
232 232  
233 -[[image:image-20220602160627-7.png||height="369" width="800"]]
234 234  
319 +[[image:image-20220602103227-6.png]]
235 235  
236 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
237 237  
238 -=== 1.9.1  Hardware and Software Connection ===
322 +[[image:image-20220602103357-7.png]]
239 239  
240 240  
241 -(% class="wikigeneratedid" id="HOverviewFF1A" %)
242 -(% style="color:blue" %)**Overview：**
243 243  
326 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
327 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
328 +
329 +
330 +[[image:image-20220602103844-8.png]]
331 +
332 +
333 +
334 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
335 +(% style="color:blue" %)**3. Select the bin file to burn**
336 +
337 +
338 +[[image:image-20220602104144-9.png]]
339 +
340 +
341 +[[image:image-20220602104251-10.png]]
342 +
343 +
344 +[[image:image-20220602104402-11.png]]
345 +
346 +
347 +
348 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
349 +(% style="color:blue" %)**4. Click to start the download**
350 +
351 +[[image:image-20220602104923-13.png]]
352 +
353 +
354 +
355 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
356 +(% style="color:blue" %)**5. Check update process**
357 +
358 +
359 +[[image:image-20220602104948-14.png]]
360 +
361 +
362 +
363 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
364 +(% style="color:blue" %)**The following picture shows that the burning is successful**
365 +
366 +[[image:image-20220602105251-15.png]]
367 +
368 +
369 +
370 += 3.  LA66 USB LoRaWAN Adapter =
371 +
372 +
373 +== 3.1  Overview ==
374 +
375 +
376 +[[image:image-20220715001142-3.png||height="145" width="220"]]
377 +
378 +
244 244  (((
245 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
380 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
381 +)))
246 246  
247 -* Send real-time location information of mobile phone to LoRaWAN network.
248 -* Check LoRaWAN network signal strengh.
249 -* Manually send messages to LoRaWAN network.
383 +(((
384 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
250 250  )))
251 251  
387 +(((
388 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
389 +)))
252 252  
391 +(((
392 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
393 +)))
253 253  
254 -(% class="wikigeneratedid" id="HHardwareConnection:" %)
255 -(% style="color:blue" %)**Hardware Connection:**
395 +(((
396 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
397 +)))
256 256  
257 -A USB to Type-C adapter is needed to connect to a Mobile phone.
258 258  
259 -(% style="color:red" %)**Note: The package of LA66 USB adapter already includes this USB Type-C adapter.**
260 260  
261 -[[image:image-20220813174353-2.png||height="360" width="313"]]
401 +== 3.2  Features ==
262 262  
403 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
404 +* Ultra-long RF range
405 +* Support LoRaWAN v1.0.4 protocol
406 +* Support peer-to-peer protocol
407 +* TCXO crystal to ensure RF performance on low temperature
408 +* Spring RF antenna
409 +* Available in different frequency LoRaWAN frequency bands.
410 +* World-wide unique OTAA keys.
411 +* AT Command via UART-TTL interface
412 +* Firmware upgradable via UART interface
413 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
263 263  
264 -(% class="wikigeneratedid" id="HDownloadandInstallApp:" %)
265 -(% style="color:blue" %)**Download and Install App:**
266 266  
267 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
268 268  
269 -[[image:image-20220813173738-1.png]]
417 +== 3.3  Specification ==
270 270  
419 +* CPU: 32-bit 48 MHz
420 +* Flash: 256KB
421 +* RAM: 64KB
422 +* Input Power Range: 5v
423 +* Frequency Range: 150 MHz ~~ 960 MHz
424 +* Maximum Power +22 dBm constant RF output
425 +* High sensitivity: -148 dBm
426 +* Temperature:
427 +** Storage: -55 ~~ +125℃
428 +** Operating: -40 ~~ +85℃
429 +* Humidity:
430 +** Storage: 5 ~~ 95% (Non-Condensing)
431 +** Operating: 10 ~~ 95% (Non-Condensing)
432 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
433 +* LoRa Rx current: <9 mA
271 271  
272 -(% class="wikigeneratedid" id="HUseofAPP:" %)
273 -(% style="color:blue" %)**Use of APP:**
274 274  
275 -Function and page introduction:
276 276  
277 -[[image:image-20220723113448-7.png||height="911" width="412"]]
437 +== 3.4  Pin Mapping & LED ==
278 278  
279 279  
280 -(% style="color:blue" %)**Block Explain:**
281 281  
282 -1.  Display LA66 USB LoRaWAN Module connection status
441 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
283 283  
284 -2.  Check and reconnect
285 285  
286 -3.  Turn send timestamps on or off
444 +(((
445 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
446 +)))
287 287  
288 -4.  Display LoRaWan connection status
289 289  
290 -5.  Check LoRaWan connection status
449 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
291 291  
292 -6.  The RSSI value of the node when the ACK is received
293 293  
294 -7.  Node's Signal Strength Icon
452 +[[image:image-20220723100027-1.png]]
295 295  
296 -8.  Configure Location Uplink Interval
297 297  
298 -9.  AT command input box
455 +Open the serial port tool
299 299  
300 -10.  Send Button:  Send input box info to LA66 USB Adapter
457 +[[image:image-20220602161617-8.png]]
301 301  
302 -11.  Output Log from LA66 USB adapter
459 +[[image:image-20220602161718-9.png||height="457" width="800"]]
303 303  
304 -12.  clear log button
305 305  
306 -13.  exit button
307 307  
463 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
308 308  
309 -LA66 USB LoRaWAN Module not connected:
465 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
310 310  
311 -[[image:image-20220723110520-5.png||height="677" width="508"]]
312 312  
468 +[[image:image-20220602161935-10.png||height="498" width="800"]]
313 313  
314 -Connect LA66 USB LoRaWAN Module:
315 315  
316 -[[image:image-20220723110626-6.png||height="681" width="511"]]
317 317  
472 +(% style="color:blue" %)**3. See Uplink Command**
318 318  
319 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
474 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
320 320  
476 +example: AT+SENDB=01,02,8,05820802581ea0a5
321 321  
322 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
478 +[[image:image-20220602162157-11.png||height="497" width="800"]]
323 323  
324 -[[image:image-20220723134549-8.png]]
325 325  
326 326  
327 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
482 +(% style="color:blue" %)**4. Check to see if TTN received the message**
328 328  
484 +[[image:image-20220602162331-12.png||height="420" width="800"]]
329 329  
330 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
331 331  
332 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
333 333  
334 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
488 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
335 335  
336 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
337 337  
491 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
338 338  
339 -Example output in NodeRed is as below:
493 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
340 340  
341 -[[image:image-20220723144339-1.png]]
495 +(% style="color:red" %)**Preconditions:**
342 342  
497 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
343 343  
344 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
499 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
345 345  
346 -=== 1.10.1 LA66V1 Update method ===
347 347  
348 348  
349 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
503 +(% style="color:blue" %)**Steps for usage:**
350 350  
351 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
505 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
352 352  
353 -**Firmware download:**
507 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
354 354  
355 -[[Firmware - Dropbox>>url:https://www.dropbox.com/sh/g99v0fxcltn9r1y/AABJQUWNgt61Z567OcUf-sIya/LA66%20LoRaWAN%20module/Firmware?dl=0&subfolder_nav_tracking=1]]
509 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
356 356  
357 -(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
358 358  
359 -[[image:image-20220723150132-2.png||height="514" width="506"]]
360 360  
513 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
361 361  
362 -(% class="wikigeneratedid" id="HOpentheUpgradetool28TremoProgrammer29inPCandUpgrade" %)
363 -(% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**
364 364  
365 -**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
516 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
366 366  
367 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
368 368  
369 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png" height="486" width="390"]]
519 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
370 370  
521 +[[image:image-20220723100439-2.png]]
371 371  
372 -**2.  Select the COM port corresponding to USB TTL**
373 373  
374 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png" height="291" width="389"]]
375 375  
525 +(% style="color:blue" %)**2. Install Minicom in RPi.**
376 376  
377 -**3.  Select the bin file to burn**
527 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
378 378  
379 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png" height="318" width="405"]]
529 + (% style="background-color:yellow" %)**apt update**
380 380  
381 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png" height="330" width="579"]]
531 + (% style="background-color:yellow" %)**apt install minicom**
382 382  
383 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png" height="290" width="372"]]
384 384  
534 +Use minicom to connect to the RPI's terminal
385 385  
386 -**4.  Click to start the download**
536 +[[image:image-20220602153146-3.png||height="439" width="500"]]
387 387  
388 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png" height="462" width="372"]]
389 389  
390 390  
391 -**5.  Check update process**
540 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
392 392  
393 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png" height="483" width="386"]]
542 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
394 394  
395 395  
396 -**The following picture shows that the burning is successful**
545 +[[image:image-20220602154928-5.png||height="436" width="500"]]
397 397  
398 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png" height="513" width="406"]]
399 399  
400 400  
401 -=== 1.10.2 LA66V2 Update method ===
549 +(% style="color:blue" %)**4. Send Uplink message**
402 402  
551 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
403 403  
404 -**Firmware download（Please select withbootloader version）:**
553 +example: AT+SENDB=01,02,8,05820802581ea0a5
405 405  
406 -[[Firmware - Dropbox>>url:https://www.dropbox.com/sh/g99v0fxcltn9r1y/AABJQUWNgt61Z567OcUf-sIya/LA66%20LoRaWAN%20module/Firmware?dl=0&subfolder_nav_tracking=1]]
407 407  
556 +[[image:image-20220602160339-6.png||height="517" width="600"]]
408 408  
409 -**Firmware update method:**
410 410  
411 -Please refer to this link
412 412  
413 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe]]
560 +Check to see if TTN received the message
414 414  
562 +[[image:image-20220602160627-7.png||height="369" width="800"]]
415 415  
416 -= 2.  FAQ =
417 417  
418 -== 2.1  How to Compile Source Code for LA66? ==
419 419  
566 +== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
420 420  
421 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
422 422  
569 +=== 3.8.1 DRAGINO-LA66-APP ===
423 423  
424 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
425 425  
572 +[[image:image-20220723102027-3.png]]
426 426  
427 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
428 428  
429 429  
430 -== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
576 +==== (% style="color:blue" %)**Overview：**(%%) ====
431 431  
432 432  
433 -Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
579 +DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
434 434  
581 +View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
435 435  
436 -== 2.4 How to use external antenna via ipex connector? ==
437 437  
438 438  
439 -You need to remove the spring antenna first, and also remove the resistor and capacitor.
440 -Connect external antenna.
585 +==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
441 441  
442 -[[image:image-20231129155939-1.png||height="529" width="397"]]
443 443  
588 +Requires a type-c to USB adapter
444 444  
445 -= 3.  Order Info =
590 +[[image:image-20220723104754-4.png]]
446 446  
447 447  
448 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
449 449  
450 -(% style="color:blue" %)**XXX**(%%): The default frequency band
594 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
451 451  
452 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
453 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
454 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
455 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
456 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
457 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
458 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
459 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
460 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
461 461  
462 -= 4.  Reference =
597 +Function and page introduction
463 463  
599 +[[image:image-20220723113448-7.png||height="1481" width="670"]]
464 464  
465 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
466 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
601 +1.Display LA66 USB LoRaWAN Module connection status
467 467  
468 -= 5.  FCC Statement =
603 +2.Check and reconnect
469 469  
605 +3.Turn send timestamps on or off
470 470  
471 -(% style="color:red" %)**FCC Caution:**
607 +4.Display LoRaWan connection status
472 472  
473 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
609 +5.Check LoRaWan connection status
474 474  
475 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
611 +6.The RSSI value of the node when the ACK is received
476 476  
613 +7.Node's Signal Strength Icon
477 477  
478 -(% style="color:red" %)**IMPORTANT NOTE: **
615 +8.Set the packet sending interval of the node in seconds
479 479  
480 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
617 +9.AT command input box
481 481  
482 -—Reorient or relocate the receiving antenna.
619 +10.Send AT command button
483 483  
484 -—Increase the separation between the equipment and receiver.
621 +11.Node log box
485 485  
486 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
623 +12.clear log button
487 487  
488 -—Consult the dealer or an experienced radio/TV technician for help.
625 +13.exit button
489 489  
490 490  
491 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
628 +LA66 USB LoRaWAN Module not connected
492 492  
493 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
630 +[[image:image-20220723110520-5.png||height="903" width="677"]]
494 494  
495 -
632 +
633 +
634 +Connect LA66 USB LoRaWAN Module
635 +
636 +[[image:image-20220723110626-6.png||height="906" width="680"]]
637 +
638 +
639 +
640 +=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
641 +
642 +
643 +**1.  Register LA66 USB LoRaWAN Module to TTNV3**
644 +
645 +[[image:image-20220723134549-8.png]]
646 +
647 +
648 +
649 +**2.  Open Node-RED,And import the JSON file to generate the flow**
650 +
651 +Sample JSON file please go to this link to download：放置JSON文件的链接
652 +
653 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
654 +
655 +The following is the positioning effect map
656 +
657 +[[image:image-20220723144339-1.png]]
658 +
659 +
660 +
661 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
662 +
663 +
664 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
665 +
666 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
667 +
668 +[[image:image-20220723150132-2.png]]
669 +
670 +
671 +
672 += 4.  Order Info =
673 +
674 +
675 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
676 +
677 +
678 +(% style="color:blue" %)**XXX**(%%): The default frequency band
679 +
680 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
681 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
682 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
683 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
684 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
685 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
686 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
687 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
688 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
689 +
690 +
691 += 5.  Reference =
692 +
693 +
694 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20231129155939-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -4.6 MB
Content
image-20240101111021-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -11.2 KB
Content
image-20240101111030-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -11.2 KB
Content