Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 172.1
edited by Bei Jinggeng
on 2024/03/15 09:56
Change comment: There is no comment for this version
To version 93.1
edited by Edwin Chen
on 2022/07/15 00:12
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Edwin
Content
... ... @@ -6,22 +6,20 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 -
16 -[[image:image-20220715001142-3.png||height="194" width="294"]][[image:image-20240101111030-2.png]]
17 -
18 -
19 19  (((
20 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
16 +[[image:image-20220715000242-1.png||height="110" width="132"]]
17 +
18 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
21 21  )))
22 22  
23 23  (((
24 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
22 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 25  )))
26 26  
27 27  (((
... ... @@ -39,26 +39,23 @@
39 39  
40 40  == 1.2  Features ==
41 41  
42 -
43 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 -* Ultra-long RF range
45 -* Support LoRaWAN v1.0.3 protocol
40 +* Support LoRaWAN v1.0.4 protocol
46 46  * Support peer-to-peer protocol
47 47  * TCXO crystal to ensure RF performance on low temperature
48 -* Spring RF antenna
43 +* SMD Antenna pad and i-pex antenna connector
49 49  * Available in different frequency LoRaWAN frequency bands.
50 50  * World-wide unique OTAA keys.
51 51  * AT Command via UART-TTL interface
52 52  * Firmware upgradable via UART interface
53 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
48 +* Ultra-long RF range
54 54  
55 55  == 1.3  Specification ==
56 56  
57 -
58 58  * CPU: 32-bit 48 MHz
59 59  * Flash: 256KB
60 60  * RAM: 64KB
61 -* Input Power Range: 5v
55 +* Input Power Range: 1.8v ~~ 3.7v
56 +* Power Consumption: < 4uA.
62 62  * Frequency Range: 150 MHz ~~ 960 MHz
63 63  * Maximum Power +22 dBm constant RF output
64 64  * High sensitivity: -148 dBm
... ... @@ -70,372 +70,412 @@
70 70  ** Operating: 10 ~~ 95% (Non-Condensing)
71 71  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
72 72  * LoRa Rx current: <9 mA
68 +* I/O Voltage: 3.3v
73 73  
74 -== 1.4  Pin Mapping & LED ==
70 +== 1.4  AT Command ==
75 75  
72 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
76 76  
77 -[[image:image-20220813183239-3.png||height="526" width="662"]]
78 78  
75 +== 1.5  Dimension ==
79 79  
80 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
77 +[[image:image-20220517072526-1.png]]
81 81  
82 82  
83 -(((
84 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
85 -)))
86 86  
87 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
81 +== 1.6  Pin Mapping ==
88 88  
89 -[[image:image-20220723100027-1.png]]
90 90  
84 +[[image:image-20220523101537-1.png]]
91 91  
92 -Open the serial port tool
93 93  
94 -[[image:image-20220602161617-8.png]]
95 95  
88 +== 1.7  Land Pattern ==
96 96  
97 -[[image:image-20220602161718-9.png||height="457" width="800"]]
90 +[[image:image-20220517072821-2.png]]
98 98  
99 99  
100 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
101 101  
102 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
94 += 2.  LA66 LoRaWAN Shield =
103 103  
104 -[[image:image-20220602161935-10.png||height="498" width="800"]]
105 105  
97 +== 2.1  Overview ==
106 106  
107 -(% style="color:blue" %)**3.  See Uplink Command**
108 108  
109 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
100 +[[image:image-20220715000826-2.png||height="386" width="449"]]
110 110  
111 -example: AT+SENDB=01,02,8,05820802581ea0a5
112 112  
113 -[[image:image-20220602162157-11.png||height="497" width="800"]]
103 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
114 114  
105 +(((
106 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
107 +)))
115 115  
116 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
109 +(((
110 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
111 +)))
117 117  
118 -[[image:image-20220817093644-1.png]]
113 +(((
114 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
115 +)))
119 119  
117 +(((
118 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
119 +)))
120 120  
121 -== 1.6  Example: How to join helium ==
122 122  
122 +== 2.2  Features ==
123 123  
124 -(% style="color:blue" %)**1.  Create a new device.**
124 +* Arduino Shield base on LA66 LoRaWAN module
125 +* Support LoRaWAN v1.0.4 protocol
126 +* Support peer-to-peer protocol
127 +* TCXO crystal to ensure RF performance on low temperature
128 +* SMA connector
129 +* Available in different frequency LoRaWAN frequency bands.
130 +* World-wide unique OTAA keys.
131 +* AT Command via UART-TTL interface
132 +* Firmware upgradable via UART interface
133 +* Ultra-long RF range
125 125  
126 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
135 +== 2.3  Specification ==
127 127  
137 +* CPU: 32-bit 48 MHz
138 +* Flash: 256KB
139 +* RAM: 64KB
140 +* Input Power Range: 1.8v ~~ 3.7v
141 +* Power Consumption: < 4uA.
142 +* Frequency Range: 150 MHz ~~ 960 MHz
143 +* Maximum Power +22 dBm constant RF output
144 +* High sensitivity: -148 dBm
145 +* Temperature:
146 +** Storage: -55 ~~ +125℃
147 +** Operating: -40 ~~ +85℃
148 +* Humidity:
149 +** Storage: 5 ~~ 95% (Non-Condensing)
150 +** Operating: 10 ~~ 95% (Non-Condensing)
151 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
152 +* LoRa Rx current: <9 mA
153 +* I/O Voltage: 3.3v
128 128  
129 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
155 +== 2.4  Pin Mapping & LED ==
130 130  
131 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
132 132  
133 133  
134 -(% style="color:blue" %)**3.  Use AT commands.**
159 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
135 135  
136 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
137 137  
138 138  
139 -(% style="color:blue" %)**4.  Use the serial port tool**
163 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
140 140  
141 -[[image:image-20220909151517-2.png||height="543" width="708"]]
142 142  
143 143  
144 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
167 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
145 145  
146 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
147 147  
148 148  
149 -(% style="color:blue" %)**6.  Network successfully.**
171 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
150 150  
151 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
152 152  
174 +=== 2.8.1  Items needed for update ===
153 153  
154 -(% style="color:blue" %)**7.  Send uplink using command**
176 +1. LA66 LoRaWAN Shield
177 +1. Arduino
178 +1. USB TO TTL Adapter
155 155  
156 -[[image:image-20220912085244-1.png]]
180 +[[image:image-20220602100052-2.png||height="385" width="600"]]
157 157  
158 -[[image:image-20220912085307-2.png]]
159 159  
183 +=== 2.8.2  Connection ===
160 160  
161 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
162 162  
186 +[[image:image-20220602101311-3.png||height="276" width="600"]]
163 163  
164 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
165 165  
189 +(((
190 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
191 +)))
166 166  
167 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
193 +(((
194 +(% style="background-color:yellow" %)**GND  <-> GND
195 +TXD  <->  TXD
196 +RXD  <->  RXD**
197 +)))
168 168  
169 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
170 170  
200 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
171 171  
172 -(% style="color:red" %)**Preconditions:**
202 +Connect USB TTL Adapter to PC after connecting the wires
173 173  
174 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
175 175  
176 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
205 +[[image:image-20220602102240-4.png||height="304" width="600"]]
177 177  
178 178  
179 -(% style="color:blue" %)**Steps for usage:**
208 +=== 2.8.3  Upgrade steps ===
180 180  
181 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
182 182  
183 -(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
211 +==== 1.  Switch SW1 to put in ISP position ====
184 184  
185 -(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
186 186  
214 +[[image:image-20220602102824-5.png||height="306" width="600"]]
187 187  
188 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
189 189  
190 190  
191 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
218 +==== 2.  Press the RST switch once ====
192 192  
193 193  
194 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
221 +[[image:image-20220602104701-12.png||height="285" width="600"]]
195 195  
196 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
197 197  
198 -[[image:image-20220723100439-2.png]]
199 199  
225 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
200 200  
201 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
202 202  
203 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
228 +(((
229 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
230 +)))
204 204  
205 - (% style="background-color:yellow" %)**apt update**
206 206  
207 - (% style="background-color:yellow" %)**apt install minicom**
233 +[[image:image-20220602103227-6.png]]
208 208  
209 -Use minicom to connect to the RPI's terminal
210 210  
211 -[[image:image-20220602153146-3.png||height="439" width="500"]]
236 +[[image:image-20220602103357-7.png]]
212 212  
213 213  
214 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
215 215  
216 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
240 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
241 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
217 217  
218 -[[image:image-20220602154928-5.png||height="436" width="500"]]
219 219  
244 +[[image:image-20220602103844-8.png]]
220 220  
221 -(% style="color:blue" %)**4.  Send Uplink message**
222 222  
223 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
224 224  
225 -example: AT+SENDB=01,02,8,05820802581ea0a5
248 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
249 +(% style="color:blue" %)**3. Select the bin file to burn**
226 226  
227 -[[image:image-20220602160339-6.png||height="517" width="600"]]
228 228  
252 +[[image:image-20220602104144-9.png]]
229 229  
230 -Check to see if TTN received the message
231 231  
255 +[[image:image-20220602104251-10.png]]
232 232  
233 -[[image:image-20220602160627-7.png||height="369" width="800"]]
234 234  
258 +[[image:image-20220602104402-11.png]]
235 235  
236 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
237 237  
238 -=== 1.9.1  Hardware and Software Connection ===
239 239  
262 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
263 +(% style="color:blue" %)**4. Click to start the download**
240 240  
241 -(% class="wikigeneratedid" id="HOverviewFF1A" %)
242 -(% style="color:blue" %)**Overview：**
265 +[[image:image-20220602104923-13.png]]
243 243  
244 -(((
245 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
246 246  
247 -* Send real-time location information of mobile phone to LoRaWAN network.
248 -* Check LoRaWAN network signal strengh.
249 -* Manually send messages to LoRaWAN network.
250 -)))
251 251  
269 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
270 +(% style="color:blue" %)**5. Check update process**
252 252  
253 253  
254 -(% class="wikigeneratedid" id="HHardwareConnection:" %)
255 -(% style="color:blue" %)**Hardware Connection:**
273 +[[image:image-20220602104948-14.png]]
256 256  
257 -A USB to Type-C adapter is needed to connect to a Mobile phone.
258 258  
259 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
260 260  
261 -[[image:image-20220813174353-2.png||height="360" width="313"]]
277 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
278 +(% style="color:blue" %)**The following picture shows that the burning is successful**
262 262  
280 +[[image:image-20220602105251-15.png]]
263 263  
264 -(% class="wikigeneratedid" id="HDownloadandInstallApp:" %)
265 -(% style="color:blue" %)**Download and Install App:**
266 266  
267 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
268 268  
269 -[[image:image-20220813173738-1.png]]
284 += 3.  LA66 USB LoRaWAN Adapter =
270 270  
271 271  
272 -(% class="wikigeneratedid" id="HUseofAPP:" %)
273 -(% style="color:blue" %)**Use of APP:**
287 +== 3.1  Overview ==
274 274  
275 -Function and page introduction:
289 +[[image:image-20220715001142-3.png||height="145" width="220"]]
276 276  
277 -[[image:image-20220723113448-7.png||height="995" width="450"]]
291 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
278 278  
293 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
279 279  
280 -(% style="color:blue" %)**Block Explain:**
295 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
281 281  
282 -1.  Display LA66 USB LoRaWAN Module connection status
297 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
283 283  
284 -2.  Check and reconnect
299 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
285 285  
286 -3.  Turn send timestamps on or off
287 287  
288 -4.  Display LoRaWan connection status
302 +== 3.2  Features ==
289 289  
290 -5.  Check LoRaWan connection status
304 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
305 +* Ultra-long RF range
306 +* Support LoRaWAN v1.0.4 protocol
307 +* Support peer-to-peer protocol
308 +* TCXO crystal to ensure RF performance on low temperature
309 +* Spring RF antenna
310 +* Available in different frequency LoRaWAN frequency bands.
311 +* World-wide unique OTAA keys.
312 +* AT Command via UART-TTL interface
313 +* Firmware upgradable via UART interface
291 291  
292 -6.  The RSSI value of the node when the ACK is received
315 +== 3.3  Specification ==
293 293  
294 -7.  Node's Signal Strength Icon
317 +* CPU: 32-bit 48 MHz
318 +* Flash: 256KB
319 +* RAM: 64KB
320 +* Input Power Range: 5v
321 +* Frequency Range: 150 MHz ~~ 960 MHz
322 +* Maximum Power +22 dBm constant RF output
323 +* High sensitivity: -148 dBm
324 +* Temperature:
325 +** Storage: -55 ~~ +125℃
326 +** Operating: -40 ~~ +85℃
327 +* Humidity:
328 +** Storage: 5 ~~ 95% (Non-Condensing)
329 +** Operating: 10 ~~ 95% (Non-Condensing)
330 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
331 +* LoRa Rx current: <9 mA
295 295  
296 -8.  Configure Location Uplink Interval
333 +== 3.4  Pin Mapping & LED ==
297 297  
298 -9.  AT command input box
299 299  
300 -10.  Send Button:  Send input box info to LA66 USB Adapter
301 301  
302 -11.  Output Log from LA66 USB adapter
337 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
303 303  
304 -12.  clear log button
305 305  
306 -13.  exit button
340 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
307 307  
308 308  
309 -LA66 USB LoRaWAN Module not connected:
343 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
310 310  
311 -[[image:image-20220723110520-5.png||height="677" width="508"]]
312 312  
346 +[[image:image-20220602171217-1.png||height="538" width="800"]]
313 313  
314 -Connect LA66 USB LoRaWAN Module:
315 315  
316 -[[image:image-20220723110626-6.png||height="681" width="511"]]
349 +Open the serial port tool
317 317  
351 +[[image:image-20220602161617-8.png]]
318 318  
319 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
353 +[[image:image-20220602161718-9.png||height="457" width="800"]]
320 320  
321 321  
322 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
323 323  
357 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
324 324  
325 -[[image:image-20220723134549-8.png]]
359 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
326 326  
327 327  
362 +[[image:image-20220602161935-10.png||height="498" width="800"]]
328 328  
329 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
330 330  
331 331  
332 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
366 +(% style="color:blue" %)**3. See Uplink Command**
333 333  
334 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
368 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
335 335  
336 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
370 +example: AT+SENDB=01,02,8,05820802581ea0a5
337 337  
338 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
372 +[[image:image-20220602162157-11.png||height="497" width="800"]]
339 339  
340 340  
341 -Example output in NodeRed is as below:
342 342  
343 -[[image:image-20220723144339-1.png]]
376 +(% style="color:blue" %)**4. Check to see if TTN received the message**
344 344  
378 +[[image:image-20220602162331-12.png||height="420" width="800"]]
345 345  
346 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
347 347  
348 -=== 1.10.1 LA66V1 Update method ===
349 349  
350 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
382 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
351 351  
352 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
353 353  
354 -(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
385 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
355 355  
356 -[[image:image-20220723150132-2.png||height="514" width="506"]]
357 357  
388 +(% style="color:red" %)**Preconditions:**
358 358  
359 -(% class="wikigeneratedid" id="HOpentheUpgradetool28TremoProgrammer29inPCandUpgrade" %)
360 -(% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**
390 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
361 361  
362 -**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
392 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
363 363  
364 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
365 365  
366 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png" height="486" width="390"]]
367 367  
396 +(% style="color:blue" %)**Steps for usage:**
368 368  
369 -**2.  Select the COM port corresponding to USB TTL**
398 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
370 370  
371 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png" height="291" width="389"]]
400 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
372 372  
402 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
373 373  
374 -**3.  Select the bin file to burn**
375 375  
376 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png" height="318" width="405"]]
377 377  
378 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png" height="330" width="579"]]
406 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
379 379  
380 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png" height="290" width="372"]]
381 381  
409 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
382 382  
383 -**4.  Click to start the download**
384 384  
385 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png" height="462" width="372"]]
412 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
386 386  
414 +[[image:image-20220602171233-2.png||height="538" width="800"]]
387 387  
388 -**5.  Check update process**
389 389  
390 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png" height="483" width="386"]]
391 391  
418 +(% style="color:blue" %)**2. Install Minicom in RPi.**
392 392  
393 -**The following picture shows that the burning is successful**
420 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
394 394  
395 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png" height="513" width="406"]]
422 + (% style="background-color:yellow" %)**apt update**
396 396  
397 -=== 1.10.2 LA66V2 Update method ===
424 + (% style="background-color:yellow" %)**apt install minicom**
398 398  
399 -Please refer to this link
400 400  
401 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe]]
427 +Use minicom to connect to the RPI's terminal
402 402  
429 +[[image:image-20220602153146-3.png||height="439" width="500"]]
403 403  
404 -= 2.  FAQ =
405 405  
406 -== 2.1  How to Compile Source Code for LA66? ==
407 407  
433 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
408 408  
409 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
435 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
410 410  
411 411  
412 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
438 +[[image:image-20220602154928-5.png||height="436" width="500"]]
413 413  
414 414  
415 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
416 416  
442 +(% style="color:blue" %)**4. Send Uplink message**
417 417  
418 -== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
444 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
419 419  
446 +example: AT+SENDB=01,02,8,05820802581ea0a5
420 420  
421 -Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
422 422  
449 +[[image:image-20220602160339-6.png||height="517" width="600"]]
423 423  
424 -== 2.4 How to use external antenna via ipex connector? ==
425 425  
426 426  
427 -You need to remove the spring antenna first, and also remove the resistor and capacitor.
428 -Connect external antenna.
453 +Check to see if TTN received the message
429 429  
430 -[[image:image-20231129155939-1.png||height="529" width="397"]]
455 +[[image:image-20220602160627-7.png||height="369" width="800"]]
431 431  
432 432  
433 -= 3.  Order Info =
434 434  
459 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
435 435  
436 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
437 437  
438 438  
463 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
464 +
465 +
466 +
467 +
468 += 4.  Order Info =
469 +
470 +
471 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
472 +
473 +
439 439  (% style="color:blue" %)**XXX**(%%): The default frequency band
440 440  
441 441  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -448,37 +448,8 @@
448 448  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
449 449  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
450 450  
451 -= 4.  Reference =
486 += 5.  Reference =
452 452  
488 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
453 453  
454 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
455 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
456 -
457 -= 5.  FCC Statement =
458 -
459 -
460 -(% style="color:red" %)**FCC Caution:**
461 -
462 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
463 -
464 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
465 -
466 -
467 -(% style="color:red" %)**IMPORTANT NOTE: **
468 -
469 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
470 -
471 -—Reorient or relocate the receiving antenna.
472 -
473 -—Increase the separation between the equipment and receiver.
474 -
475 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
476 -
477 -—Consult the dealer or an experienced radio/TV technician for help.
478 -
479 -
480 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
481 -
482 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
483 -
484 484  
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20231129155939-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -4.6 MB
Content
image-20240101111021-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -11.2 KB
Content
image-20240101111030-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -11.2 KB
Content