Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 171.1
edited by Bei Jinggeng
on 2024/03/15 09:54
Change comment: There is no comment for this version
To version 146.4
edited by Xiaoling
on 2022/08/16 11:04
Change comment: Updated the relative links.

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Xiaoling
Content
... ... @@ -6,25 +6,34 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
15 15  
16 -[[image:image-20220715001142-3.png||height="194" width="294"]][[image:image-20240101111030-2.png]]
20 +(((
21 +
22 +)))
17 17  
18 -
19 19  (((
20 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
21 21  )))
27 +)))
22 22  
23 23  (((
30 +(((
24 24  (% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 25  )))
33 +)))
26 26  
27 27  (((
36 +(((
28 28  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
29 29  )))
30 30  
... ... @@ -31,26 +31,28 @@
31 31  (((
32 32  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
33 33  )))
43 +)))
34 34  
35 35  (((
46 +(((
36 36  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
37 37  )))
49 +)))
38 38  
39 39  
52 +
40 40  == 1.2  Features ==
41 41  
42 42  
43 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 -* Ultra-long RF range
45 -* Support LoRaWAN v1.0.3 protocol
56 +* Support LoRaWAN v1.0.4 protocol
46 46  * Support peer-to-peer protocol
47 47  * TCXO crystal to ensure RF performance on low temperature
48 -* Spring RF antenna
59 +* SMD Antenna pad and i-pex antenna connector
49 49  * Available in different frequency LoRaWAN frequency bands.
50 50  * World-wide unique OTAA keys.
51 51  * AT Command via UART-TTL interface
52 52  * Firmware upgradable via UART interface
53 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
64 +* Ultra-long RF range
54 54  
55 55  == 1.3  Specification ==
56 56  
... ... @@ -58,7 +58,8 @@
58 58  * CPU: 32-bit 48 MHz
59 59  * Flash: 256KB
60 60  * RAM: 64KB
61 -* Input Power Range: 5v
72 +* Input Power Range: 1.8v ~~ 3.7v
73 +* Power Consumption: < 4uA.
62 62  * Frequency Range: 150 MHz ~~ 960 MHz
63 63  * Maximum Power +22 dBm constant RF output
64 64  * High sensitivity: -148 dBm
... ... @@ -70,105 +70,449 @@
70 70  ** Operating: 10 ~~ 95% (Non-Condensing)
71 71  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
72 72  * LoRa Rx current: <9 mA
85 +* I/O Voltage: 3.3v
73 73  
74 -== 1.4  Pin Mapping & LED ==
87 +== 1.4  AT Command ==
75 75  
76 76  
77 -[[image:image-20220813183239-3.png||height="526" width="662"]]
90 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
78 78  
79 79  
80 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
81 81  
94 +== 1.5  Dimension ==
82 82  
96 +[[image:image-20220718094750-3.png]]
97 +
98 +
99 +
100 +== 1.6  Pin Mapping ==
101 +
102 +[[image:image-20220720111850-1.png]]
103 +
104 +
105 +
106 +== 1.7  Land Pattern ==
107 +
108 +
109 +[[image:image-20220517072821-2.png]]
110 +
111 +
112 +
113 += 2.  LA66 LoRaWAN Shield =
114 +
115 +
116 +== 2.1  Overview ==
117 +
118 +
83 83  (((
84 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
120 +[[image:image-20220715000826-2.png||height="145" width="220"]]
85 85  )))
86 86  
87 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
123 +(((
124 +
125 +)))
88 88  
89 -[[image:image-20220723100027-1.png]]
127 +(((
128 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
129 +)))
90 90  
131 +(((
132 +(((
133 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
134 +)))
135 +)))
91 91  
92 -Open the serial port tool
137 +(((
138 +(((
139 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
140 +)))
141 +)))
93 93  
94 -[[image:image-20220602161617-8.png]]
143 +(((
144 +(((
145 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
146 +)))
147 +)))
95 95  
149 +(((
150 +(((
151 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
152 +)))
153 +)))
96 96  
97 -[[image:image-20220602161718-9.png||height="457" width="800"]]
98 98  
99 99  
100 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
157 +== 2.2  Features ==
101 101  
102 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
103 103  
104 -[[image:image-20220602161935-10.png||height="498" width="800"]]
160 +* Arduino Shield base on LA66 LoRaWAN module
161 +* Support LoRaWAN v1.0.4 protocol
162 +* Support peer-to-peer protocol
163 +* TCXO crystal to ensure RF performance on low temperature
164 +* SMA connector
165 +* Available in different frequency LoRaWAN frequency bands.
166 +* World-wide unique OTAA keys.
167 +* AT Command via UART-TTL interface
168 +* Firmware upgradable via UART interface
169 +* Ultra-long RF range
105 105  
171 +== 2.3  Specification ==
106 106  
107 -(% style="color:blue" %)**3.  See Uplink Command**
108 108  
109 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
174 +* CPU: 32-bit 48 MHz
175 +* Flash: 256KB
176 +* RAM: 64KB
177 +* Input Power Range: 1.8v ~~ 3.7v
178 +* Power Consumption: < 4uA.
179 +* Frequency Range: 150 MHz ~~ 960 MHz
180 +* Maximum Power +22 dBm constant RF output
181 +* High sensitivity: -148 dBm
182 +* Temperature:
183 +** Storage: -55 ~~ +125℃
184 +** Operating: -40 ~~ +85℃
185 +* Humidity:
186 +** Storage: 5 ~~ 95% (Non-Condensing)
187 +** Operating: 10 ~~ 95% (Non-Condensing)
188 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
189 +* LoRa Rx current: <9 mA
190 +* I/O Voltage: 3.3v
110 110  
111 -example: AT+SENDB=01,02,8,05820802581ea0a5
192 +== 2.4  Pin Mapping & LED ==
112 112  
113 -[[image:image-20220602162157-11.png||height="497" width="800"]]
114 114  
195 +[[image:image-20220814101457-1.png||height="553" width="761"]]
115 115  
116 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
197 +~1. The LED lights up red when there is an upstream data packet
198 +2. When the network is successfully connected, the green light will be on for 5 seconds
199 +3. Purple light on when receiving downlink data packets
117 117  
118 -[[image:image-20220817093644-1.png]]
119 119  
120 120  
121 -== 1.6  Example: How to join helium ==
203 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
122 122  
123 123  
124 -(% style="color:blue" %)**1.  Create a new device.**
206 +**Show connection diagram：**
125 125  
126 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
127 127  
209 +[[image:image-20220723170210-2.png||height="908" width="681"]]
128 128  
129 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
130 130  
131 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
132 132  
213 +(% style="color:blue" %)**1.  open Arduino IDE**
133 133  
134 -(% style="color:blue" %)**3.  Use AT commands.**
135 135  
136 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
216 +[[image:image-20220723170545-4.png]]
137 137  
138 138  
139 -(% style="color:blue" %)**4.  Use the serial port tool**
140 140  
141 -[[image:image-20220909151517-2.png||height="543" width="708"]]
220 +(% style="color:blue" %)**2.  Open project**
142 142  
143 143  
144 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
223 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
145 145  
146 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
225 +[[image:image-20220726135239-1.png]]
147 147  
148 148  
149 -(% style="color:blue" %)**6.  Network successfully.**
228 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
150 150  
151 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
230 +[[image:image-20220726135356-2.png]]
152 152  
153 153  
154 -(% style="color:blue" %)**7.  Send uplink using command**
233 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
155 155  
156 -[[image:image-20220912085244-1.png]]
157 157  
158 -[[image:image-20220912085307-2.png]]
236 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
159 159  
160 160  
161 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
162 162  
240 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
163 163  
164 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
165 165  
243 +(% style="color:blue" %)**1.  Open project**
166 166  
245 +
246 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
247 +
248 +
249 +[[image:image-20220723172502-8.png]]
250 +
251 +
252 +
253 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
254 +
255 +
256 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
257 +
258 +
259 +
260 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
261 +
262 +
263 +(% style="color:blue" %)**1.  Open project**
264 +
265 +
266 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
267 +
268 +
269 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
270 +
271 +
272 +
273 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
274 +
275 +
276 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
277 +
278 +
279 +
280 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
281 +
282 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
283 +
284 +[[image:image-20220723175700-12.png||height="602" width="995"]]
285 +
286 +
287 +
288 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
289 +
290 +
291 +=== 2.8.1  Items needed for update ===
292 +
293 +
294 +1. LA66 LoRaWAN Shield
295 +1. Arduino
296 +1. USB TO TTL Adapter
297 +
298 +[[image:image-20220602100052-2.png||height="385" width="600"]]
299 +
300 +
301 +
302 +=== 2.8.2  Connection ===
303 +
304 +
305 +[[image:image-20220602101311-3.png||height="276" width="600"]]
306 +
307 +
308 +(((
309 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
310 +)))
311 +
312 +(((
313 +(% style="background-color:yellow" %)**GND  <-> GND
314 +TXD  <->  TXD
315 +RXD  <->  RXD**
316 +)))
317 +
318 +
319 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
320 +
321 +Connect USB TTL Adapter to PC after connecting the wires
322 +
323 +
324 +[[image:image-20220602102240-4.png||height="304" width="600"]]
325 +
326 +
327 +
328 +=== 2.8.3  Upgrade steps ===
329 +
330 +
331 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
332 +
333 +
334 +[[image:image-20220602102824-5.png||height="306" width="600"]]
335 +
336 +
337 +
338 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
339 +
340 +
341 +[[image:image-20220602104701-12.png||height="285" width="600"]]
342 +
343 +
344 +
345 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
346 +
347 +
348 +(((
349 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
350 +)))
351 +
352 +
353 +[[image:image-20220602103227-6.png]]
354 +
355 +
356 +[[image:image-20220602103357-7.png]]
357 +
358 +
359 +
360 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
361 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
362 +
363 +
364 +[[image:image-20220602103844-8.png]]
365 +
366 +
367 +
368 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
369 +(% style="color:blue" %)**3. Select the bin file to burn**
370 +
371 +
372 +[[image:image-20220602104144-9.png]]
373 +
374 +
375 +[[image:image-20220602104251-10.png]]
376 +
377 +
378 +[[image:image-20220602104402-11.png]]
379 +
380 +
381 +
382 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
383 +(% style="color:blue" %)**4. Click to start the download**
384 +
385 +[[image:image-20220602104923-13.png]]
386 +
387 +
388 +
389 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
390 +(% style="color:blue" %)**5. Check update process**
391 +
392 +
393 +[[image:image-20220602104948-14.png]]
394 +
395 +
396 +
397 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
398 +(% style="color:blue" %)**The following picture shows that the burning is successful**
399 +
400 +[[image:image-20220602105251-15.png]]
401 +
402 +
403 +
404 += 3.  LA66 USB LoRaWAN Adapter =
405 +
406 +
407 +== 3.1  Overview ==
408 +
409 +
410 +[[image:image-20220715001142-3.png||height="145" width="220"]]
411 +
412 +
413 +(((
414 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
415 +)))
416 +
417 +(((
418 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
419 +)))
420 +
421 +(((
422 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
423 +)))
424 +
425 +(((
426 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
427 +)))
428 +
429 +(((
430 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
431 +)))
432 +
433 +
434 +
435 +== 3.2  Features ==
436 +
437 +
438 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
439 +* Ultra-long RF range
440 +* Support LoRaWAN v1.0.4 protocol
441 +* Support peer-to-peer protocol
442 +* TCXO crystal to ensure RF performance on low temperature
443 +* Spring RF antenna
444 +* Available in different frequency LoRaWAN frequency bands.
445 +* World-wide unique OTAA keys.
446 +* AT Command via UART-TTL interface
447 +* Firmware upgradable via UART interface
448 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
449 +
450 +== 3.3  Specification ==
451 +
452 +
453 +* CPU: 32-bit 48 MHz
454 +* Flash: 256KB
455 +* RAM: 64KB
456 +* Input Power Range: 5v
457 +* Frequency Range: 150 MHz ~~ 960 MHz
458 +* Maximum Power +22 dBm constant RF output
459 +* High sensitivity: -148 dBm
460 +* Temperature:
461 +** Storage: -55 ~~ +125℃
462 +** Operating: -40 ~~ +85℃
463 +* Humidity:
464 +** Storage: 5 ~~ 95% (Non-Condensing)
465 +** Operating: 10 ~~ 95% (Non-Condensing)
466 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
467 +* LoRa Rx current: <9 mA
468 +
469 +== 3.4  Pin Mapping & LED ==
470 +
471 +[[image:image-20220813183239-3.png||height="526" width="662"]]
472 +
473 +
474 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
475 +
476 +
477 +(((
478 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
479 +)))
480 +
481 +
482 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
483 +
484 +
485 +[[image:image-20220723100027-1.png]]
486 +
487 +
488 +Open the serial port tool
489 +
490 +[[image:image-20220602161617-8.png]]
491 +
492 +[[image:image-20220602161718-9.png||height="457" width="800"]]
493 +
494 +
495 +
496 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
497 +
498 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
499 +
500 +
501 +[[image:image-20220602161935-10.png||height="498" width="800"]]
502 +
503 +
504 +
505 +(% style="color:blue" %)**3. See Uplink Command**
506 +
507 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
508 +
509 +example: AT+SENDB=01,02,8,05820802581ea0a5
510 +
511 +[[image:image-20220602162157-11.png||height="497" width="800"]]
512 +
513 +
514 +
515 +(% style="color:blue" %)**4. Check to see if TTN received the message**
516 +
517 +[[image:image-20220602162331-12.png||height="420" width="800"]]
518 +
519 +
520 +
521 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
522 +
523 +
167 167  **Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
168 168  
169 169  (**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
170 170  
171 -
172 172  (% style="color:red" %)**Preconditions:**
173 173  
174 174  (% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
... ... @@ -176,30 +176,31 @@
176 176  (% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
177 177  
178 178  
535 +
179 179  (% style="color:blue" %)**Steps for usage:**
180 180  
181 181  (% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
182 182  
183 -(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
540 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
184 184  
185 -(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
186 -
187 -
188 188  [[image:image-20220602115852-3.png||height="450" width="1187"]]
189 189  
190 190  
191 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
192 192  
546 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
193 193  
548 +
194 194  Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
195 195  
196 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
197 197  
552 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
553 +
198 198  [[image:image-20220723100439-2.png]]
199 199  
200 200  
201 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
202 202  
558 +(% style="color:blue" %)**2. Install Minicom in RPi.**
559 +
203 203  (% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
204 204  
205 205   (% style="background-color:yellow" %)**apt update**
... ... @@ -206,41 +206,48 @@
206 206  
207 207   (% style="background-color:yellow" %)**apt install minicom**
208 208  
566 +
209 209  Use minicom to connect to the RPI's terminal
210 210  
211 211  [[image:image-20220602153146-3.png||height="439" width="500"]]
212 212  
213 213  
214 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
215 215  
573 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
574 +
216 216  The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
217 217  
577 +
218 218  [[image:image-20220602154928-5.png||height="436" width="500"]]
219 219  
220 220  
221 -(% style="color:blue" %)**4.  Send Uplink message**
222 222  
582 +(% style="color:blue" %)**4. Send Uplink message**
583 +
223 223  Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
224 224  
225 225  example: AT+SENDB=01,02,8,05820802581ea0a5
226 226  
588 +
227 227  [[image:image-20220602160339-6.png||height="517" width="600"]]
228 228  
229 229  
592 +
230 230  Check to see if TTN received the message
231 231  
232 -
233 233  [[image:image-20220602160627-7.png||height="369" width="800"]]
234 234  
235 235  
236 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
237 237  
238 -=== 1.9.1  Hardware and Software Connection ===
599 +== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
239 239  
240 240  
241 -(% class="wikigeneratedid" id="HOverviewFF1A" %)
242 -(% style="color:blue" %)**Overview：**
602 +=== 3.8.1  Hardware and Software Connection ===
243 243  
604 +
605 +==== (% style="color:blue" %)**Overview：**(%%) ====
606 +
607 +
244 244  (((
245 245  DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
246 246  
... ... @@ -251,8 +251,7 @@
251 251  
252 252  
253 253  
254 -(% class="wikigeneratedid" id="HHardwareConnection:" %)
255 -(% style="color:blue" %)**Hardware Connection:**
618 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
256 256  
257 257  A USB to Type-C adapter is needed to connect to a Mobile phone.
258 258  
... ... @@ -261,8 +261,7 @@
261 261  [[image:image-20220813174353-2.png||height="360" width="313"]]
262 262  
263 263  
264 -(% class="wikigeneratedid" id="HDownloadandInstallApp:" %)
265 -(% style="color:blue" %)**Download and Install App:**
627 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
266 266  
267 267  [[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
268 268  
... ... @@ -269,16 +269,14 @@
269 269  [[image:image-20220813173738-1.png]]
270 270  
271 271  
272 -(% class="wikigeneratedid" id="HUseofAPP:" %)
273 -(% style="color:blue" %)**Use of APP:**
634 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
274 274  
275 -Function and page introduction:
636 +Function and page introduction
276 276  
277 277  [[image:image-20220723113448-7.png||height="995" width="450"]]
278 278  
640 +**Block Explain:**
279 279  
280 -(% style="color:blue" %)**Block Explain:**
281 -
282 282  1.  Display LA66 USB LoRaWAN Module connection status
283 283  
284 284  2.  Check and reconnect
... ... @@ -306,22 +306,23 @@
306 306  13.  exit button
307 307  
308 308  
309 -LA66 USB LoRaWAN Module not connected:
669 +LA66 USB LoRaWAN Module not connected
310 310  
311 311  [[image:image-20220723110520-5.png||height="677" width="508"]]
312 312  
313 313  
314 -Connect LA66 USB LoRaWAN Module:
315 315  
675 +Connect LA66 USB LoRaWAN Module
676 +
316 316  [[image:image-20220723110626-6.png||height="681" width="511"]]
317 317  
318 318  
319 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
320 320  
681 +=== 3.8.2 Send data to TTNv3 and plot location info in Node-Red ===
321 321  
683 +
322 322  (% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
323 323  
324 -
325 325  [[image:image-20220723134549-8.png]]
326 326  
327 327  
... ... @@ -328,7 +328,6 @@
328 328  
329 329  (% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
330 330  
331 -
332 332  Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
333 333  
334 334  For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
... ... @@ -335,111 +335,40 @@
335 335  
336 336  After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
337 337  
338 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
339 339  
340 -
341 341  Example output in NodeRed is as below:
342 342  
343 343  [[image:image-20220723144339-1.png]]
344 344  
345 345  
346 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
347 347  
348 -=== 1.10.1 LA66V1 Update method ===
705 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
349 349  
350 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
351 351  
352 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
708 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
353 353  
354 -(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
710 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
355 355  
356 -[[image:image-20220723150132-2.png||height="514" width="506"]]
712 +[[image:image-20220723150132-2.png]]
357 357  
358 358  
359 -(% class="wikigeneratedid" id="HOpentheUpgradetool28TremoProgrammer29inPCandUpgrade" %)
360 -(% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**
361 361  
362 -**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
716 += 4.  FAQ =
363 363  
364 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
365 365  
366 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png" height="486" width="390"]]
719 +== 4.1  How to Compile Source Code for LA66? ==
367 367  
368 368  
369 -**2.  Select the COM port corresponding to USB TTL**
370 -
371 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png" height="291" width="389"]]
372 -
373 -
374 -**3.  Select the bin file to burn**
375 -
376 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png" height="318" width="405"]]
377 -
378 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png" height="330" width="579"]]
379 -
380 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png" height="290" width="372"]]
381 -
382 -
383 -**4.  Click to start the download**
384 -
385 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png" height="462" width="372"]]
386 -
387 -
388 -**5.  Check update process**
389 -
390 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png" height="483" width="386"]]
391 -
392 -
393 -**The following picture shows that the burning is successful**
394 -
395 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png" height="513" width="406"]]
396 -
397 -(% class="wikigeneratedid" %)
398 -=== ===
399 -
400 -(% class="wikigeneratedid" %)
401 -=== 1.10.2 LA66V2 Update method ===
402 -
403 -Please refer to this link
404 -
405 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe]]
406 -
407 -
408 -= 2.  FAQ =
409 -
410 -== 2.1  How to Compile Source Code for LA66? ==
411 -
412 -
413 413  Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
414 414  
415 415  
416 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
417 417  
726 += 5.  Order Info =
418 418  
419 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
420 420  
729 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
421 421  
422 -== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
423 423  
424 -
425 -Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
426 -
427 -
428 -== 2.4 How to use external antenna via ipex connector? ==
429 -
430 -
431 -You need to remove the spring antenna first, and also remove the resistor and capacitor.
432 -Connect external antenna.
433 -
434 -[[image:image-20231129155939-1.png||height="529" width="397"]]
435 -
436 -
437 -= 3.  Order Info =
438 -
439 -
440 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
441 -
442 -
443 443  (% style="color:blue" %)**XXX**(%%): The default frequency band
444 444  
445 445  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -452,37 +452,7 @@
452 452  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
453 453  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
454 454  
455 -= 4.  Reference =
744 += 6.  Reference =
456 456  
457 457  
458 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
459 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
460 -
461 -= 5.  FCC Statement =
462 -
463 -
464 -(% style="color:red" %)**FCC Caution:**
465 -
466 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
467 -
468 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
469 -
470 -
471 -(% style="color:red" %)**IMPORTANT NOTE: **
472 -
473 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
474 -
475 -—Reorient or relocate the receiving antenna.
476 -
477 -—Increase the separation between the equipment and receiver.
478 -
479 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
480 -
481 -—Consult the dealer or an experienced radio/TV technician for help.
482 -
483 -
484 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
485 -
486 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
487 -
488 -
747 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20231129155939-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -4.6 MB
Content
image-20240101111021-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -11.2 KB
Content
image-20240101111030-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -11.2 KB
Content