Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 169.2
edited by Xiaoling
on 2024/01/22 09:39
Change comment: There is no comment for this version
To version 134.2
edited by Xiaoling
on 2022/07/26 10:28
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -6,25 +6,34 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
15 15  
16 -[[image:image-20220715001142-3.png||height="194" width="294"]][[image:image-20240101111030-2.png]]
20 +(((
21 +
22 +)))
17 17  
18 -
19 19  (((
20 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
21 21  )))
27 +)))
22 22  
23 23  (((
30 +(((
24 24  (% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 25  )))
33 +)))
26 26  
27 27  (((
36 +(((
28 28  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
29 29  )))
30 30  
... ... @@ -31,34 +31,35 @@
31 31  (((
32 32  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
33 33  )))
43 +)))
34 34  
35 35  (((
46 +(((
36 36  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
37 37  )))
49 +)))
38 38  
39 39  
52 +
40 40  == 1.2  Features ==
41 41  
42 -
43 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 -* Ultra-long RF range
45 -* Support LoRaWAN v1.0.3 protocol
55 +* Support LoRaWAN v1.0.4 protocol
46 46  * Support peer-to-peer protocol
47 47  * TCXO crystal to ensure RF performance on low temperature
48 -* Spring RF antenna
58 +* SMD Antenna pad and i-pex antenna connector
49 49  * Available in different frequency LoRaWAN frequency bands.
50 50  * World-wide unique OTAA keys.
51 51  * AT Command via UART-TTL interface
52 52  * Firmware upgradable via UART interface
53 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
63 +* Ultra-long RF range
54 54  
55 55  == 1.3  Specification ==
56 56  
57 -
58 58  * CPU: 32-bit 48 MHz
59 59  * Flash: 256KB
60 60  * RAM: 64KB
61 -* Input Power Range: 5v
70 +* Input Power Range: 1.8v ~~ 3.7v
71 +* Power Consumption: < 4uA.
62 62  * Frequency Range: 150 MHz ~~ 960 MHz
63 63  * Maximum Power +22 dBm constant RF output
64 64  * High sensitivity: -148 dBm
... ... @@ -70,404 +70,615 @@
70 70  ** Operating: 10 ~~ 95% (Non-Condensing)
71 71  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
72 72  * LoRa Rx current: <9 mA
83 +* I/O Voltage: 3.3v
73 73  
74 -== 1.4  Pin Mapping & LED ==
85 +== 1.4  AT Command ==
75 75  
76 76  
77 -[[image:image-20220813183239-3.png||height="526" width="662"]]
88 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
78 78  
79 79  
80 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
81 81  
92 +== 1.5  Dimension ==
82 82  
94 +[[image:image-20220718094750-3.png]]
95 +
96 +
97 +
98 +== 1.6  Pin Mapping ==
99 +
100 +[[image:image-20220720111850-1.png]]
101 +
102 +
103 +
104 +== 1.7  Land Pattern ==
105 +
106 +[[image:image-20220517072821-2.png]]
107 +
108 +
109 +
110 += 2.  LA66 LoRaWAN Shield =
111 +
112 +
113 +== 2.1  Overview ==
114 +
115 +
83 83  (((
84 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
117 +[[image:image-20220715000826-2.png||height="145" width="220"]]
85 85  )))
86 86  
87 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
120 +(((
121 +
122 +)))
88 88  
89 -[[image:image-20220723100027-1.png]]
124 +(((
125 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
126 +)))
90 90  
128 +(((
129 +(((
130 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
131 +)))
132 +)))
91 91  
92 -Open the serial port tool
134 +(((
135 +(((
136 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
137 +)))
138 +)))
93 93  
94 -[[image:image-20220602161617-8.png]]
140 +(((
141 +(((
142 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
143 +)))
144 +)))
95 95  
146 +(((
147 +(((
148 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
149 +)))
150 +)))
96 96  
97 -[[image:image-20220602161718-9.png||height="457" width="800"]]
98 98  
99 99  
100 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
154 +== 2.2  Features ==
101 101  
102 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
156 +* Arduino Shield base on LA66 LoRaWAN module
157 +* Support LoRaWAN v1.0.4 protocol
158 +* Support peer-to-peer protocol
159 +* TCXO crystal to ensure RF performance on low temperature
160 +* SMA connector
161 +* Available in different frequency LoRaWAN frequency bands.
162 +* World-wide unique OTAA keys.
163 +* AT Command via UART-TTL interface
164 +* Firmware upgradable via UART interface
165 +* Ultra-long RF range
103 103  
104 -[[image:image-20220602161935-10.png||height="498" width="800"]]
167 +== 2.3  Specification ==
105 105  
169 +* CPU: 32-bit 48 MHz
170 +* Flash: 256KB
171 +* RAM: 64KB
172 +* Input Power Range: 1.8v ~~ 3.7v
173 +* Power Consumption: < 4uA.
174 +* Frequency Range: 150 MHz ~~ 960 MHz
175 +* Maximum Power +22 dBm constant RF output
176 +* High sensitivity: -148 dBm
177 +* Temperature:
178 +** Storage: -55 ~~ +125℃
179 +** Operating: -40 ~~ +85℃
180 +* Humidity:
181 +** Storage: 5 ~~ 95% (Non-Condensing)
182 +** Operating: 10 ~~ 95% (Non-Condensing)
183 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
184 +* LoRa Rx current: <9 mA
185 +* I/O Voltage: 3.3v
106 106  
107 -(% style="color:blue" %)**3.  See Uplink Command**
187 +== 2.4  LED ==
108 108  
109 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
189 +~1. The LED lights up red when there is an upstream data packet
190 +2. When the network is successfully connected, the green light will be on for 5 seconds
191 +3. Purple light on when receiving downlink data packets
110 110  
111 -example: AT+SENDB=01,02,8,05820802581ea0a5
112 112  
113 -[[image:image-20220602162157-11.png||height="497" width="800"]]
194 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
114 114  
196 +Show connection diagram：
115 115  
116 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
198 +[[image:image-20220723170210-2.png||height="908" width="681"]]
117 117  
118 -[[image:image-20220817093644-1.png]]
200 +1.open Arduino IDE
119 119  
202 +[[image:image-20220723170545-4.png]]
120 120  
121 -== 1.6  Example: How to join helium ==
204 +2.Open project
122 122  
206 +[[image:image-20220723170750-5.png||height="533" width="930"]]
123 123  
124 -(% style="color:blue" %)**1.  Create a new device.**
208 +3.Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload
125 125  
126 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
210 +[[image:image-20220723171228-6.png]]
127 127  
212 +4.After the upload is successful, open the serial port monitoring and send the AT command
128 128  
129 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
214 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
130 130  
131 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
216 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
132 132  
218 +1.Open project
133 133  
134 -(% style="color:blue" %)**3.  Use AT commands.**
220 +[[image:image-20220723172502-8.png]]
135 135  
136 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
222 +2.Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
137 137  
224 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
138 138  
139 -(% style="color:blue" %)**4.  Use the serial port tool**
140 140  
141 -[[image:image-20220909151517-2.png||height="543" width="708"]]
142 142  
228 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
143 143  
144 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
145 145  
146 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
231 +**1.  Open project**
147 147  
148 148  
149 -(% style="color:blue" %)**6.  Network successfully.**
234 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0>>https://www.dropbox.com/sh/trqitpm9adkupva/AAAE542NzwlHubIAIDxe6IWFa?dl=0]]
150 150  
151 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
152 152  
237 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
153 153  
154 -(% style="color:blue" %)**7.  Send uplink using command**
155 155  
156 -[[image:image-20220912085244-1.png]]
157 157  
158 -[[image:image-20220912085307-2.png]]
241 +**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
159 159  
160 160  
161 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
244 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
162 162  
163 163  
164 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
165 165  
248 +**3.  Integration into Node-red via TTNV3**
166 166  
167 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
250 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
168 168  
169 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
252 +[[image:image-20220723175700-12.png||height="602" width="995"]]
170 170  
171 171  
172 -(% style="color:red" %)**Preconditions:**
173 173  
174 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
256 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
175 175  
176 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
177 177  
259 +=== 2.8.1  Items needed for update ===
178 178  
179 -(% style="color:blue" %)**Steps for usage:**
180 180  
181 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
262 +1. LA66 LoRaWAN Shield
263 +1. Arduino
264 +1. USB TO TTL Adapter
182 182  
183 -(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
266 +[[image:image-20220602100052-2.png||height="385" width="600"]]
184 184  
185 -(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
186 186  
269 +=== 2.8.2  Connection ===
187 187  
188 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
189 189  
272 +[[image:image-20220602101311-3.png||height="276" width="600"]]
190 190  
191 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
192 192  
275 +(((
276 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
277 +)))
193 193  
194 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
279 +(((
280 +(% style="background-color:yellow" %)**GND  <-> GND
281 +TXD  <->  TXD
282 +RXD  <->  RXD**
283 +)))
195 195  
196 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
197 197  
198 -[[image:image-20220723100439-2.png]]
286 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
199 199  
288 +Connect USB TTL Adapter to PC after connecting the wires
200 200  
201 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
202 202  
203 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
291 +[[image:image-20220602102240-4.png||height="304" width="600"]]
204 204  
205 - (% style="background-color:yellow" %)**apt update**
206 206  
207 - (% style="background-color:yellow" %)**apt install minicom**
294 +=== 2.8.3  Upgrade steps ===
208 208  
209 -Use minicom to connect to the RPI's terminal
210 210  
211 -[[image:image-20220602153146-3.png||height="439" width="500"]]
297 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
212 212  
213 213  
214 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
300 +[[image:image-20220602102824-5.png||height="306" width="600"]]
215 215  
216 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
217 217  
218 -[[image:image-20220602154928-5.png||height="436" width="500"]]
219 219  
304 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
220 220  
221 -(% style="color:blue" %)**4.  Send Uplink message**
222 222  
223 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
307 +[[image:image-20220602104701-12.png||height="285" width="600"]]
224 224  
225 -example: AT+SENDB=01,02,8,05820802581ea0a5
226 226  
227 -[[image:image-20220602160339-6.png||height="517" width="600"]]
228 228  
311 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
229 229  
230 -Check to see if TTN received the message
231 231  
314 +(((
315 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
316 +)))
232 232  
233 -[[image:image-20220602160627-7.png||height="369" width="800"]]
234 234  
319 +[[image:image-20220602103227-6.png]]
235 235  
236 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
237 237  
238 -=== 1.9.1  Hardware and Software Connection ===
322 +[[image:image-20220602103357-7.png]]
239 239  
240 240  
241 -==== (% style="color:blue" %)**Overview：**(%%) ====
242 242  
326 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
327 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
328 +
329 +
330 +[[image:image-20220602103844-8.png]]
331 +
332 +
333 +
334 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
335 +(% style="color:blue" %)**3. Select the bin file to burn**
336 +
337 +
338 +[[image:image-20220602104144-9.png]]
339 +
340 +
341 +[[image:image-20220602104251-10.png]]
342 +
343 +
344 +[[image:image-20220602104402-11.png]]
345 +
346 +
347 +
348 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
349 +(% style="color:blue" %)**4. Click to start the download**
350 +
351 +[[image:image-20220602104923-13.png]]
352 +
353 +
354 +
355 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
356 +(% style="color:blue" %)**5. Check update process**
357 +
358 +
359 +[[image:image-20220602104948-14.png]]
360 +
361 +
362 +
363 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
364 +(% style="color:blue" %)**The following picture shows that the burning is successful**
365 +
366 +[[image:image-20220602105251-15.png]]
367 +
368 +
369 +
370 += 3.  LA66 USB LoRaWAN Adapter =
371 +
372 +
373 +== 3.1  Overview ==
374 +
375 +
376 +[[image:image-20220715001142-3.png||height="145" width="220"]]
377 +
378 +
243 243  (((
244 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
380 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
381 +)))
245 245  
246 -* Send real-time location information of mobile phone to LoRaWAN network.
247 -* Check LoRaWAN network signal strengh.
248 -* Manually send messages to LoRaWAN network.
383 +(((
384 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
249 249  )))
250 250  
387 +(((
388 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
389 +)))
251 251  
391 +(((
392 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
393 +)))
252 252  
253 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
395 +(((
396 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
397 +)))
254 254  
255 -A USB to Type-C adapter is needed to connect to a Mobile phone.
256 256  
257 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
258 258  
259 -[[image:image-20220813174353-2.png||height="360" width="313"]]
401 +== 3.2  Features ==
260 260  
403 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
404 +* Ultra-long RF range
405 +* Support LoRaWAN v1.0.4 protocol
406 +* Support peer-to-peer protocol
407 +* TCXO crystal to ensure RF performance on low temperature
408 +* Spring RF antenna
409 +* Available in different frequency LoRaWAN frequency bands.
410 +* World-wide unique OTAA keys.
411 +* AT Command via UART-TTL interface
412 +* Firmware upgradable via UART interface
413 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
261 261  
262 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
263 263  
264 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
265 265  
266 -[[image:image-20220813173738-1.png]]
417 +== 3.3  Specification ==
267 267  
419 +* CPU: 32-bit 48 MHz
420 +* Flash: 256KB
421 +* RAM: 64KB
422 +* Input Power Range: 5v
423 +* Frequency Range: 150 MHz ~~ 960 MHz
424 +* Maximum Power +22 dBm constant RF output
425 +* High sensitivity: -148 dBm
426 +* Temperature:
427 +** Storage: -55 ~~ +125℃
428 +** Operating: -40 ~~ +85℃
429 +* Humidity:
430 +** Storage: 5 ~~ 95% (Non-Condensing)
431 +** Operating: 10 ~~ 95% (Non-Condensing)
432 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
433 +* LoRa Rx current: <9 mA
268 268  
269 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
270 270  
271 -Function and page introduction:
272 272  
273 -[[image:image-20220723113448-7.png||height="995" width="450"]]
437 +== 3.4  Pin Mapping & LED ==
274 274  
275 275  
276 -(% style="color:blue" %)**Block Explain:**
277 277  
278 -1.  Display LA66 USB LoRaWAN Module connection status
441 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
279 279  
280 -2.  Check and reconnect
281 281  
282 -3.  Turn send timestamps on or off
444 +(((
445 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
446 +)))
283 283  
284 -4.  Display LoRaWan connection status
285 285  
286 -5.  Check LoRaWan connection status
449 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
287 287  
288 -6.  The RSSI value of the node when the ACK is received
289 289  
290 -7.  Node's Signal Strength Icon
452 +[[image:image-20220723100027-1.png]]
291 291  
292 -8.  Configure Location Uplink Interval
293 293  
294 -9.  AT command input box
455 +Open the serial port tool
295 295  
296 -10.  Send Button:  Send input box info to LA66 USB Adapter
457 +[[image:image-20220602161617-8.png]]
297 297  
298 -11.  Output Log from LA66 USB adapter
459 +[[image:image-20220602161718-9.png||height="457" width="800"]]
299 299  
300 -12.  clear log button
301 301  
302 -13.  exit button
303 303  
463 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
304 304  
305 -LA66 USB LoRaWAN Module not connected:
465 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
306 306  
307 -[[image:image-20220723110520-5.png||height="677" width="508"]]
308 308  
468 +[[image:image-20220602161935-10.png||height="498" width="800"]]
309 309  
310 -Connect LA66 USB LoRaWAN Module:
311 311  
312 -[[image:image-20220723110626-6.png||height="681" width="511"]]
313 313  
472 +(% style="color:blue" %)**3. See Uplink Command**
314 314  
315 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
474 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
316 316  
476 +example: AT+SENDB=01,02,8,05820802581ea0a5
317 317  
318 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
478 +[[image:image-20220602162157-11.png||height="497" width="800"]]
319 319  
320 320  
321 -[[image:image-20220723134549-8.png]]
322 322  
482 +(% style="color:blue" %)**4. Check to see if TTN received the message**
323 323  
484 +[[image:image-20220602162331-12.png||height="420" width="800"]]
324 324  
325 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
326 326  
327 327  
328 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
488 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
329 329  
330 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
331 331  
332 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
491 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
333 333  
334 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
493 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
335 335  
495 +(% style="color:red" %)**Preconditions:**
336 336  
337 -Example output in NodeRed is as below:
497 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
338 338  
339 -[[image:image-20220723144339-1.png]]
499 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
340 340  
341 341  
342 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
343 343  
503 +(% style="color:blue" %)**Steps for usage:**
344 344  
345 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
505 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
346 346  
347 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
507 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
348 348  
349 -(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
509 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
350 350  
351 -[[image:image-20220723150132-2.png]]
352 352  
353 353  
354 -=== (% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** (%%) ===
513 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
355 355  
356 356  
357 -**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
516 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
358 358  
359 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
360 360  
361 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
519 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
362 362  
521 +[[image:image-20220723100439-2.png]]
363 363  
364 -**2.  Select the COM port corresponding to USB TTL**
365 365  
366 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
367 367  
525 +(% style="color:blue" %)**2. Install Minicom in RPi.**
368 368  
369 -**3.  Select the bin file to burn**
527 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
370 370  
371 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
529 + (% style="background-color:yellow" %)**apt update**
372 372  
373 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
531 + (% style="background-color:yellow" %)**apt install minicom**
374 374  
375 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
376 376  
534 +Use minicom to connect to the RPI's terminal
377 377  
378 -**4.  Click to start the download**
536 +[[image:image-20220602153146-3.png||height="439" width="500"]]
379 379  
380 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
381 381  
382 382  
383 -**5.  Check update process**
540 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
384 384  
385 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
542 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
386 386  
387 387  
388 -**The following picture shows that the burning is successful**
545 +[[image:image-20220602154928-5.png||height="436" width="500"]]
389 389  
390 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
391 391  
392 392  
393 -= 2.  FAQ =
549 +(% style="color:blue" %)**4. Send Uplink message**
394 394  
395 -== 2.1  How to Compile Source Code for LA66? ==
551 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
396 396  
553 +example: AT+SENDB=01,02,8,05820802581ea0a5
397 397  
398 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
399 399  
556 +[[image:image-20220602160339-6.png||height="517" width="600"]]
400 400  
401 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
402 402  
403 403  
404 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
560 +Check to see if TTN received the message
405 405  
562 +[[image:image-20220602160627-7.png||height="369" width="800"]]
406 406  
407 -== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
408 408  
409 409  
410 -Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
566 +== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and APP sample process and DRAGINO-LA66-APP. ==
411 411  
412 412  
413 -== 2.4 How to use external antenna via ipex connector? ==
569 +=== 3.8.1 DRAGINO-LA66-APP ===
414 414  
415 415  
416 -You need to remove the spring antenna first, and also remove the resistor and capacitor.
417 -Connect external antenna.
572 +[[image:image-20220723102027-3.png]]
418 418  
419 -[[image:image-20231129155939-1.png||height="529" width="397"]]
420 420  
421 421  
422 -= 3.  Order Info =
576 +==== (% style="color:blue" %)**Overview：**(%%) ====
423 423  
424 424  
425 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
579 +DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Adapter and APP sample process. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Adapter.
426 426  
581 +View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
427 427  
428 -(% style="color:blue" %)**XXX**(%%): The default frequency band
429 429  
430 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
431 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
432 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
433 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
434 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
435 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
436 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
437 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
438 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
439 439  
440 -= 4.  Reference =
585 +==== (% style="color:blue" %)**Conditions of Use：**(%%) ====
441 441  
442 442  
443 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
444 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
588 +Requires a type-c to USB adapter
445 445  
446 -= 5.  FCC Statement =
590 +[[image:image-20220723104754-4.png]]
447 447  
448 448  
449 -(% style="color:red" %)**FCC Caution:**
450 450  
451 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
594 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
452 452  
453 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
454 454  
597 +Function and page introduction
455 455  
456 -(% style="color:red" %)**IMPORTANT NOTE: **
599 +[[image:image-20220723113448-7.png||height="1481" width="670"]]
457 457  
458 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
601 +1.Display LA66 USB LoRaWAN Module connection status
459 459  
460 -—Reorient or relocate the receiving antenna.
603 +2.Check and reconnect
461 461  
462 -—Increase the separation between the equipment and receiver.
605 +3.Turn send timestamps on or off
463 463  
464 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
607 +4.Display LoRaWan connection status
465 465  
466 -—Consult the dealer or an experienced radio/TV technician for help.
609 +5.Check LoRaWan connection status
467 467  
611 +6.The RSSI value of the node when the ACK is received
468 468  
469 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
613 +7.Node's Signal Strength Icon
470 470  
471 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
615 +8.Set the packet sending interval of the node in seconds
472 472  
473 -
617 +9.AT command input box
618 +
619 +10.Send AT command button
620 +
621 +11.Node log box
622 +
623 +12.clear log button
624 +
625 +13.exit button
626 +
627 +
628 +LA66 USB LoRaWAN Module not connected
629 +
630 +[[image:image-20220723110520-5.png||height="903" width="677"]]
631 +
632 +
633 +
634 +Connect LA66 USB LoRaWAN Module
635 +
636 +[[image:image-20220723110626-6.png||height="906" width="680"]]
637 +
638 +
639 +
640 +=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Adapter and integrate it into Node-RED ===
641 +
642 +
643 +**1.  Register LA66 USB LoRaWAN Module to TTNV3**
644 +
645 +[[image:image-20220723134549-8.png]]
646 +
647 +
648 +
649 +**2.  Open Node-RED,And import the JSON file to generate the flow**
650 +
651 +Sample JSON file please go to this link to download：放置JSON文件的链接
652 +
653 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
654 +
655 +The following is the positioning effect map
656 +
657 +[[image:image-20220723144339-1.png]]
658 +
659 +
660 +
661 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
662 +
663 +
664 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
665 +
666 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
667 +
668 +[[image:image-20220723150132-2.png]]
669 +
670 +
671 +
672 += 4.  Order Info =
673 +
674 +
675 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
676 +
677 +
678 +(% style="color:blue" %)**XXX**(%%): The default frequency band
679 +
680 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
681 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
682 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
683 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
684 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
685 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
686 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
687 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
688 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
689 +
690 +
691 += 5.  Reference =
692 +
693 +
694 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
image-20231129155939-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -4.6 MB
Content
image-20240101111021-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -11.2 KB
Content
image-20240101111030-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -11.2 KB
Content