Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 162.1
edited by Bei Jinggeng
on 2023/11/29 15:49
Change comment: There is no comment for this version
To version 87.1
edited by Edwin Chen
on 2022/07/11 09:10
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Edwin
Content
... ... @@ -1,64 +1,41 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
9 9  
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 -
13 -== 1.1  Overview ==
14 -
15 -
16 -[[image:image-20220715001142-3.png||height="145" width="220"]]
17 -
18 -
19 -(((
20 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
21 -)))
22 -
23 -(((
24 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 -)))
26 -
27 -(((
28 28  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
29 -)))
30 30  
31 -(((
32 32  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
33 -)))
34 34  
35 -(((
36 36  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
37 -)))
38 38  
39 39  
40 -== 1.2  Features ==
20 +== Features ==
41 41  
42 -
43 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 -* Ultra-long RF range
45 -* Support LoRaWAN v1.0.3 protocol
22 +* Support LoRaWAN v1.0.4 protocol
46 46  * Support peer-to-peer protocol
47 47  * TCXO crystal to ensure RF performance on low temperature
48 -* Spring RF antenna
25 +* SMD Antenna pad and i-pex antenna connector
49 49  * Available in different frequency LoRaWAN frequency bands.
50 50  * World-wide unique OTAA keys.
51 51  * AT Command via UART-TTL interface
52 52  * Firmware upgradable via UART interface
53 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
30 +* Ultra-long RF range
54 54  
55 -== 1.3  Specification ==
32 +== Specification ==
56 56  
57 -
58 58  * CPU: 32-bit 48 MHz
59 59  * Flash: 256KB
60 60  * RAM: 64KB
61 -* Input Power Range: 5v
37 +* Input Power Range: 1.8v ~~ 3.7v
38 +* Power Consumption: < 4uA.
62 62  * Frequency Range: 150 MHz ~~ 960 MHz
63 63  * Maximum Power +22 dBm constant RF output
64 64  * High sensitivity: -148 dBm
... ... @@ -70,415 +70,331 @@
70 70  ** Operating: 10 ~~ 95% (Non-Condensing)
71 71  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
72 72  * LoRa Rx current: <9 mA
50 +* I/O Voltage: 3.3v
73 73  
74 -== 1.4  Pin Mapping & LED ==
52 +== AT Command ==
75 75  
54 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
76 76  
77 -[[image:image-20220813183239-3.png||height="526" width="662"]]
78 78  
57 +== Dimension ==
79 79  
80 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
59 +[[image:image-20220517072526-1.png]]
81 81  
82 82  
83 -(((
84 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
62 +== Pin Mapping ==
85 85  
86 -
87 -)))
64 +[[image:image-20220523101537-1.png]]
88 88  
89 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
66 +== Land Pattern ==
90 90  
91 -[[image:image-20220723100027-1.png]]
68 +[[image:image-20220517072821-2.png]]
92 92  
93 93  
94 -Open the serial port tool
95 95  
96 -[[image:image-20220602161617-8.png]]
72 += LA66 LoRaWAN Shield =
97 97  
74 +== Overview ==
98 98  
99 -[[image:image-20220602161718-9.png||height="457" width="800"]]
76 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
100 100  
101 101  
102 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
79 +== Features ==
103 103  
104 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
81 +* Arduino Shield base on LA66 LoRaWAN module
82 +* Support LoRaWAN v1.0.4 protocol
83 +* Support peer-to-peer protocol
84 +* TCXO crystal to ensure RF performance on low temperature
85 +* SMA connector
86 +* Available in different frequency LoRaWAN frequency bands.
87 +* World-wide unique OTAA keys.
88 +* AT Command via UART-TTL interface
89 +* Firmware upgradable via UART interface
90 +* Ultra-long RF range
105 105  
106 -[[image:image-20220602161935-10.png||height="498" width="800"]]
92 +== Specification ==
107 107  
94 +* CPU: 32-bit 48 MHz
95 +* Flash: 256KB
96 +* RAM: 64KB
97 +* Input Power Range: 1.8v ~~ 3.7v
98 +* Power Consumption: < 4uA.
99 +* Frequency Range: 150 MHz ~~ 960 MHz
100 +* Maximum Power +22 dBm constant RF output
101 +* High sensitivity: -148 dBm
102 +* Temperature:
103 +** Storage: -55 ~~ +125℃
104 +** Operating: -40 ~~ +85℃
105 +* Humidity:
106 +** Storage: 5 ~~ 95% (Non-Condensing)
107 +** Operating: 10 ~~ 95% (Non-Condensing)
108 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
109 +* LoRa Rx current: <9 mA
110 +* I/O Voltage: 3.3v
108 108  
109 -(% style="color:blue" %)**3.  See Uplink Command**
112 +== Pin Mapping & LED ==
110 110  
111 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
114 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
112 112  
113 -example: AT+SENDB=01,02,8,05820802581ea0a5
116 +== Example: Join TTN network and send an uplink message, get downlink message. ==
114 114  
115 -[[image:image-20220602162157-11.png||height="497" width="800"]]
118 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
116 116  
120 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
117 117  
118 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
122 +=== Items needed for update ===
119 119  
120 -[[image:image-20220817093644-1.png]]
124 +1. LA66 LoRaWAN Shield
125 +1. Arduino
126 +1. USB TO TTL Adapter
121 121  
128 +[[image:image-20220602100052-2.png||height="385" width="600"]]
122 122  
123 -== 1.6  Example: How to join helium ==
124 124  
131 +=== Connection ===
125 125  
126 -(% style="color:blue" %)**1.  Create a new device.**
133 +[[image:image-20220602101311-3.png||height="276" width="600"]]
127 127  
128 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
135 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
136 +**GND  <-> GND
137 +TXD  <-> TXD
138 +RXD  <-> RXD**
129 129  
140 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
130 130  
131 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
142 +Connect USB TTL Adapter to PC after connecting the wires
132 132  
133 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
134 134  
145 +[[image:image-20220602102240-4.png||height="304" width="600"]]
135 135  
136 -(% style="color:blue" %)**3.  Use AT commands.**
137 137  
138 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
148 +=== Upgrade steps ===
139 139  
150 +==== Switch SW1 to put in ISP position ====
140 140  
141 -(% style="color:blue" %)**4.  Use the serial port tool**
152 +[[image:image-20220602102824-5.png||height="306" width="600"]]
142 142  
143 -[[image:image-20220909151517-2.png||height="543" width="708"]]
144 144  
155 +==== Press the RST switch once ====
145 145  
146 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
157 +[[image:image-20220602104701-12.png||height="285" width="600"]]
147 147  
148 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
149 149  
160 +==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
150 150  
151 -(% style="color:blue" %)**6.  Network successfully.**
162 +**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
152 152  
153 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
164 +[[image:image-20220602103227-6.png]]
154 154  
166 +[[image:image-20220602103357-7.png]]
155 155  
156 -(% style="color:blue" %)**7.  Send uplink using command**
157 157  
158 -[[image:image-20220912085244-1.png]]
169 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
170 +**2. Select the COM port corresponding to USB TTL**
159 159  
160 -[[image:image-20220912085307-2.png]]
172 +[[image:image-20220602103844-8.png]]
161 161  
162 162  
163 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
175 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
176 +**3. Select the bin file to burn**
164 164  
178 +[[image:image-20220602104144-9.png]]
165 165  
166 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
180 +[[image:image-20220602104251-10.png]]
167 167  
182 +[[image:image-20220602104402-11.png]]
168 168  
169 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
170 170  
171 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
185 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
186 +**4. Click to start the download**
172 172  
188 +[[image:image-20220602104923-13.png]]
173 173  
174 -(% style="color:red" %)**Preconditions:**
175 175  
176 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
191 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
192 +**5. Check update process**
177 177  
178 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
194 +[[image:image-20220602104948-14.png]]
179 179  
180 180  
197 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
198 +**The following picture shows that the burning is successful**
181 181  
182 -(% style="color:blue" %)**Steps for usage:**
200 +[[image:image-20220602105251-15.png]]
183 183  
184 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
185 185  
186 -(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
187 187  
188 -(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
204 += LA66 USB LoRaWAN Adapter =
189 189  
206 +== Overview ==
190 190  
191 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
208 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
192 192  
193 193  
194 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
211 +== Features ==
195 195  
213 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
214 +* Ultra-long RF range
215 +* Support LoRaWAN v1.0.4 protocol
216 +* Support peer-to-peer protocol
217 +* TCXO crystal to ensure RF performance on low temperature
218 +* Spring RF antenna
219 +* Available in different frequency LoRaWAN frequency bands.
220 +* World-wide unique OTAA keys.
221 +* AT Command via UART-TTL interface
222 +* Firmware upgradable via UART interface
196 196  
197 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
224 +== Specification ==
198 198  
226 +* CPU: 32-bit 48 MHz
227 +* Flash: 256KB
228 +* RAM: 64KB
229 +* Input Power Range: 5v
230 +* Frequency Range: 150 MHz ~~ 960 MHz
231 +* Maximum Power +22 dBm constant RF output
232 +* High sensitivity: -148 dBm
233 +* Temperature:
234 +** Storage: -55 ~~ +125℃
235 +** Operating: -40 ~~ +85℃
236 +* Humidity:
237 +** Storage: 5 ~~ 95% (Non-Condensing)
238 +** Operating: 10 ~~ 95% (Non-Condensing)
239 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
240 +* LoRa Rx current: <9 mA
199 199  
200 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
242 +== Pin Mapping & LED ==
201 201  
202 -[[image:image-20220723100439-2.png]]
244 +== Example Send & Get Messages via LoRaWAN in PC ==
203 203  
246 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
204 204  
205 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
248 +~1. Connect the LA66 USB LoRaWAN adapter to PC
206 206  
207 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
250 +[[image:image-20220602171217-1.png||height="538" width="800"]]
208 208  
209 - (% style="background-color:yellow" %)**apt update**
252 +Open the serial port tool
210 210  
211 - (% style="background-color:yellow" %)**apt install minicom**
254 +[[image:image-20220602161617-8.png]]
212 212  
213 -Use minicom to connect to the RPI's terminal
256 +[[image:image-20220602161718-9.png||height="457" width="800"]]
214 214  
215 -[[image:image-20220602153146-3.png||height="439" width="500"]]
216 216  
259 +2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
217 217  
218 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
261 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
219 219  
220 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
263 +[[image:image-20220602161935-10.png||height="498" width="800"]]
221 221  
222 -[[image:image-20220602154928-5.png||height="436" width="500"]]
223 223  
266 +3. See Uplink Command
224 224  
225 -(% style="color:blue" %)**4.  Send Uplink message**
268 +Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
226 226  
227 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
228 -
229 229  example: AT+SENDB=01,02,8,05820802581ea0a5
230 230  
231 -[[image:image-20220602160339-6.png||height="517" width="600"]]
272 +[[image:image-20220602162157-11.png||height="497" width="800"]]
232 232  
233 233  
275 +4. Check to see if TTN received the message
234 234  
235 -Check to see if TTN received the message
277 +[[image:image-20220602162331-12.png||height="420" width="800"]]
236 236  
237 237  
238 -[[image:image-20220602160627-7.png||height="369" width="800"]]
239 239  
281 +== Example:Send PC's CPU/RAM usage to TTN via python ==
240 240  
241 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
283 +(% class="wikigeneratedid" id="HUsepythonasanexampleFF1A" %)
284 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
242 242  
243 -=== 1.9.1  Hardware and Software Connection ===
286 +(% class="wikigeneratedid" id="HPreconditions:" %)
287 +**Preconditions:**
244 244  
289 +1.LA66 USB LoRaWAN Adapter works fine
245 245  
291 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
246 246  
247 -==== (% style="color:blue" %)**Overview：**(%%) ====
293 +(% class="wikigeneratedid" id="HStepsforusage" %)
294 +**Steps for usage**
248 248  
296 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
249 249  
250 -(((
251 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
298 +2.Run the python script in PC and see the TTN
252 252  
253 -* Send real-time location information of mobile phone to LoRaWAN network.
254 -* Check LoRaWAN network signal strengh.
255 -* Manually send messages to LoRaWAN network.
256 -)))
300 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
257 257  
258 258  
259 259  
304 +== Example Send & Get Messages via LoRaWAN in RPi ==
260 260  
261 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
306 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
262 262  
308 +~1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
263 263  
264 -A USB to Type-C adapter is needed to connect to a Mobile phone.
310 +[[image:image-20220602171233-2.png||height="538" width="800"]]
265 265  
266 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
267 267  
268 -[[image:image-20220813174353-2.png||height="360" width="313"]]
313 +2. Install Minicom in RPi.
269 269  
315 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
270 270  
317 +(% class="mark" %)apt update
271 271  
272 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
319 +(% class="mark" %)apt install minicom
273 273  
274 274  
275 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
322 +Use minicom to connect to the RPI's terminal
276 276  
324 +[[image:image-20220602153146-3.png||height="439" width="500"]]
277 277  
278 -[[image:image-20220813173738-1.png]]
279 279  
327 +3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.
328 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
280 280  
330 +[[image:image-20220602154928-5.png||height="436" width="500"]]
281 281  
282 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
283 283  
333 +4. Send Uplink message
284 284  
285 -Function and page introduction
335 +Format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
286 286  
337 +example: AT+SENDB=01,02,8,05820802581ea0a5
287 287  
288 -[[image:image-20220723113448-7.png||height="995" width="450"]]
339 +[[image:image-20220602160339-6.png||height="517" width="600"]]
289 289  
341 +Check to see if TTN received the message
290 290  
291 -(% style="color:blue" %)**Block Explain:**
343 +[[image:image-20220602160627-7.png||height="369" width="800"]]
292 292  
293 -1.  Display LA66 USB LoRaWAN Module connection status
294 294  
295 -2.  Check and reconnect
296 296  
297 -3.  Turn send timestamps on or off
347 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
298 298  
299 -4.  Display LoRaWan connection status
300 300  
301 -5.  Check LoRaWan connection status
350 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
302 302  
303 -6.  The RSSI value of the node when the ACK is received
304 304  
305 -7.  Node's Signal Strength Icon
306 306  
307 -8.  Configure Location Uplink Interval
354 += Order Info =
308 308  
309 -9.  AT command input box
356 +Part Number:
310 310  
311 -10.  Send Button:  Send input box info to LA66 USB Adapter
358 +**LA66-XXX**, **LA66-LoRaWAN-Shield-XXX** or **LA66-USB-LoRaWAN-Adapter-XXX**
312 312  
313 -11.  Output Log from LA66 USB adapter
360 +**XXX**: The default frequency band
314 314  
315 -12.  clear log button
362 +* **AS923**: LoRaWAN AS923 band
363 +* **AU915**: LoRaWAN AU915 band
364 +* **EU433**: LoRaWAN EU433 band
365 +* **EU868**: LoRaWAN EU868 band
366 +* **KR920**: LoRaWAN KR920 band
367 +* **US915**: LoRaWAN US915 band
368 +* **IN865**: LoRaWAN IN865 band
369 +* **CN470**: LoRaWAN CN470 band
370 +* **PP**: Peer to Peer LoRa Protocol
316 316  
317 -13.  exit button
318 318  
373 += Reference =
319 319  
375 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
320 320  
321 -LA66 USB LoRaWAN Module not connected
322 -
323 -
324 -[[image:image-20220723110520-5.png||height="677" width="508"]]
325 -
326 -
327 -
328 -Connect LA66 USB LoRaWAN Module
329 -
330 -
331 -[[image:image-20220723110626-6.png||height="681" width="511"]]
332 -
333 -
334 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
335 -
336 -
337 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
338 -
339 -
340 -[[image:image-20220723134549-8.png]]
341 -
342 -
343 -
344 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
345 -
346 -
347 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
348 -
349 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
350 -
351 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
352 -
353 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
354 -
355 -
356 -Example output in NodeRed is as below:
357 -
358 -[[image:image-20220723144339-1.png]]
359 -
360 -
361 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
362 -
363 -
364 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
365 -
366 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
367 -
368 -(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
369 -
370 -[[image:image-20220723150132-2.png]]
371 -
372 -
373 -
374 -=== (% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** (%%) ===
375 -
376 -
377 -**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
378 -
379 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
380 -
381 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
382 -
383 -
384 -**2.  Select the COM port corresponding to USB TTL**
385 -
386 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
387 -
388 -
389 -**3.  Select the bin file to burn**
390 -
391 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
392 -
393 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
394 -
395 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
396 -
397 -
398 -**4.  Click to start the download**
399 -
400 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
401 -
402 -
403 -**5.  Check update process**
404 -
405 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
406 -
407 -
408 -**The following picture shows that the burning is successful**
409 -
410 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
411 -
412 -
413 -= 2.  FAQ =
414 -
415 -== 2.1  How to Compile Source Code for LA66? ==
416 -
417 -
418 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
419 -
420 -
421 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
422 -
423 -
424 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
425 -
426 -
427 -== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
428 -
429 -
430 -Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
431 -
432 -
433 -= 3.  Order Info =
434 -
435 -
436 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
437 -
438 -
439 -(% style="color:blue" %)**XXX**(%%): The default frequency band
440 -
441 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
442 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
443 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
444 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
445 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
446 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
447 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
448 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
449 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
450 -
451 -= 4.  Reference =
452 -
453 -
454 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
455 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
456 -
457 -= 5.  FCC Statement =
458 -
459 -
460 -(% style="color:red" %)**FCC Caution:**
461 -
462 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
463 -
464 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
465 -
466 -
467 -(% style="color:red" %)**IMPORTANT NOTE: **
468 -
469 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
470 -
471 -—Reorient or relocate the receiving antenna.
472 -
473 -—Increase the separation between the equipment and receiver.
474 -
475 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
476 -
477 -—Consult the dealer or an experienced radio/TV technician for help.
478 -
479 -
480 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
481 -
482 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
483 -
484 484  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content