Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 161.3
edited by Xiaoling
on 2023/09/19 18:00
Change comment: There is no comment for this version
To version 93.1
edited by Edwin Chen
on 2022/07/15 00:12
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -6,22 +6,20 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 -
16 -[[image:image-20220715001142-3.png||height="145" width="220"]]
17 -
18 -
19 19  (((
20 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
16 +[[image:image-20220715000242-1.png||height="110" width="132"]]
17 +
18 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
21 21  )))
22 22  
23 23  (((
24 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
22 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 25  )))
26 26  
27 27  (((
... ... @@ -39,26 +39,23 @@
39 39  
40 40  == 1.2  Features ==
41 41  
42 -
43 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 -* Ultra-long RF range
45 -* Support LoRaWAN v1.0.3 protocol
40 +* Support LoRaWAN v1.0.4 protocol
46 46  * Support peer-to-peer protocol
47 47  * TCXO crystal to ensure RF performance on low temperature
48 -* Spring RF antenna
43 +* SMD Antenna pad and i-pex antenna connector
49 49  * Available in different frequency LoRaWAN frequency bands.
50 50  * World-wide unique OTAA keys.
51 51  * AT Command via UART-TTL interface
52 52  * Firmware upgradable via UART interface
53 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
48 +* Ultra-long RF range
54 54  
55 55  == 1.3  Specification ==
56 56  
57 -
58 58  * CPU: 32-bit 48 MHz
59 59  * Flash: 256KB
60 60  * RAM: 64KB
61 -* Input Power Range: 5v
55 +* Input Power Range: 1.8v ~~ 3.7v
56 +* Power Consumption: < 4uA.
62 62  * Frequency Range: 150 MHz ~~ 960 MHz
63 63  * Maximum Power +22 dBm constant RF output
64 64  * High sensitivity: -148 dBm
... ... @@ -70,373 +70,412 @@
70 70  ** Operating: 10 ~~ 95% (Non-Condensing)
71 71  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
72 72  * LoRa Rx current: <9 mA
68 +* I/O Voltage: 3.3v
73 73  
70 +== 1.4  AT Command ==
74 74  
75 -== 1.4  Pin Mapping & LED ==
72 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
76 76  
77 77  
78 -[[image:image-20220813183239-3.png||height="526" width="662"]]
75 +== 1.5  Dimension ==
79 79  
77 +[[image:image-20220517072526-1.png]]
80 80  
81 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
82 82  
83 83  
84 -(((
85 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
81 +== 1.6  Pin Mapping ==
86 86  
87 -
88 -)))
89 89  
90 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
84 +[[image:image-20220523101537-1.png]]
91 91  
92 -[[image:image-20220723100027-1.png]]
93 93  
94 94  
95 -Open the serial port tool
88 +== 1.7  Land Pattern ==
96 96  
97 -[[image:image-20220602161617-8.png]]
90 +[[image:image-20220517072821-2.png]]
98 98  
99 99  
100 -[[image:image-20220602161718-9.png||height="457" width="800"]]
101 101  
94 += 2.  LA66 LoRaWAN Shield =
102 102  
103 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
104 104  
105 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
97 +== 2.1  Overview ==
106 106  
107 -[[image:image-20220602161935-10.png||height="498" width="800"]]
108 108  
100 +[[image:image-20220715000826-2.png||height="386" width="449"]]
109 109  
110 -(% style="color:blue" %)**3.  See Uplink Command**
111 111  
112 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
103 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
113 113  
114 -example: AT+SENDB=01,02,8,05820802581ea0a5
105 +(((
106 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
107 +)))
115 115  
116 -[[image:image-20220602162157-11.png||height="497" width="800"]]
109 +(((
110 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
111 +)))
117 117  
113 +(((
114 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
115 +)))
118 118  
119 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
117 +(((
118 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
119 +)))
120 120  
121 -[[image:image-20220817093644-1.png]]
122 122  
122 +== 2.2  Features ==
123 123  
124 -== 1.6  Example: How to join helium ==
124 +* Arduino Shield base on LA66 LoRaWAN module
125 +* Support LoRaWAN v1.0.4 protocol
126 +* Support peer-to-peer protocol
127 +* TCXO crystal to ensure RF performance on low temperature
128 +* SMA connector
129 +* Available in different frequency LoRaWAN frequency bands.
130 +* World-wide unique OTAA keys.
131 +* AT Command via UART-TTL interface
132 +* Firmware upgradable via UART interface
133 +* Ultra-long RF range
125 125  
135 +== 2.3  Specification ==
126 126  
127 -(% style="color:blue" %)**1.  Create a new device.**
137 +* CPU: 32-bit 48 MHz
138 +* Flash: 256KB
139 +* RAM: 64KB
140 +* Input Power Range: 1.8v ~~ 3.7v
141 +* Power Consumption: < 4uA.
142 +* Frequency Range: 150 MHz ~~ 960 MHz
143 +* Maximum Power +22 dBm constant RF output
144 +* High sensitivity: -148 dBm
145 +* Temperature:
146 +** Storage: -55 ~~ +125℃
147 +** Operating: -40 ~~ +85℃
148 +* Humidity:
149 +** Storage: 5 ~~ 95% (Non-Condensing)
150 +** Operating: 10 ~~ 95% (Non-Condensing)
151 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
152 +* LoRa Rx current: <9 mA
153 +* I/O Voltage: 3.3v
128 128  
129 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
155 +== 2.4  Pin Mapping & LED ==
130 130  
131 131  
132 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
133 133  
134 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
159 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
135 135  
136 136  
137 -(% style="color:blue" %)**3.  Use AT commands.**
138 138  
139 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
163 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
140 140  
141 141  
142 -(% style="color:blue" %)**4.  Use the serial port tool**
143 143  
144 -[[image:image-20220909151517-2.png||height="543" width="708"]]
167 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
145 145  
146 146  
147 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
148 148  
149 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
171 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
150 150  
151 151  
152 -(% style="color:blue" %)**6.  Network successfully.**
174 +=== 2.8.1  Items needed for update ===
153 153  
154 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
176 +1. LA66 LoRaWAN Shield
177 +1. Arduino
178 +1. USB TO TTL Adapter
155 155  
180 +[[image:image-20220602100052-2.png||height="385" width="600"]]
156 156  
157 -(% style="color:blue" %)**7.  Send uplink using command**
158 158  
159 -[[image:image-20220912085244-1.png]]
183 +=== 2.8.2  Connection ===
160 160  
161 -[[image:image-20220912085307-2.png]]
162 162  
186 +[[image:image-20220602101311-3.png||height="276" width="600"]]
163 163  
164 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
165 165  
189 +(((
190 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
191 +)))
166 166  
167 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
193 +(((
194 +(% style="background-color:yellow" %)**GND  <-> GND
195 +TXD  <->  TXD
196 +RXD  <->  RXD**
197 +)))
168 168  
169 169  
170 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
200 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
171 171  
172 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
202 +Connect USB TTL Adapter to PC after connecting the wires
173 173  
174 174  
175 -(% style="color:red" %)**Preconditions:**
205 +[[image:image-20220602102240-4.png||height="304" width="600"]]
176 176  
177 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
178 178  
179 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
208 +=== 2.8.3  Upgrade steps ===
180 180  
181 181  
211 +==== 1.  Switch SW1 to put in ISP position ====
182 182  
183 -(% style="color:blue" %)**Steps for usage:**
184 184  
185 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
214 +[[image:image-20220602102824-5.png||height="306" width="600"]]
186 186  
187 -(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
188 188  
189 -(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
190 190  
218 +==== 2.  Press the RST switch once ====
191 191  
192 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
193 193  
221 +[[image:image-20220602104701-12.png||height="285" width="600"]]
194 194  
195 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
196 196  
197 197  
198 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
225 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
199 199  
200 200  
201 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
228 +(((
229 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
230 +)))
202 202  
203 -[[image:image-20220723100439-2.png]]
204 204  
233 +[[image:image-20220602103227-6.png]]
205 205  
206 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
207 207  
208 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
236 +[[image:image-20220602103357-7.png]]
209 209  
210 - (% style="background-color:yellow" %)**apt update**
211 211  
212 - (% style="background-color:yellow" %)**apt install minicom**
213 213  
214 -Use minicom to connect to the RPI's terminal
240 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
241 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
215 215  
216 -[[image:image-20220602153146-3.png||height="439" width="500"]]
217 217  
244 +[[image:image-20220602103844-8.png]]
218 218  
219 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
220 220  
221 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
222 222  
223 -[[image:image-20220602154928-5.png||height="436" width="500"]]
248 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
249 +(% style="color:blue" %)**3. Select the bin file to burn**
224 224  
225 225  
226 -(% style="color:blue" %)**4.  Send Uplink message**
252 +[[image:image-20220602104144-9.png]]
227 227  
228 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
229 229  
230 -example: AT+SENDB=01,02,8,05820802581ea0a5
255 +[[image:image-20220602104251-10.png]]
231 231  
232 -[[image:image-20220602160339-6.png||height="517" width="600"]]
233 233  
258 +[[image:image-20220602104402-11.png]]
234 234  
235 235  
236 -Check to see if TTN received the message
237 237  
262 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
263 +(% style="color:blue" %)**4. Click to start the download**
238 238  
239 -[[image:image-20220602160627-7.png||height="369" width="800"]]
265 +[[image:image-20220602104923-13.png]]
240 240  
241 241  
242 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
243 243  
244 -=== 1.9.1  Hardware and Software Connection ===
269 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
270 +(% style="color:blue" %)**5. Check update process**
245 245  
246 246  
273 +[[image:image-20220602104948-14.png]]
247 247  
248 -==== (% style="color:blue" %)**Overview：**(%%) ====
249 249  
250 250  
251 -(((
252 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
277 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
278 +(% style="color:blue" %)**The following picture shows that the burning is successful**
253 253  
254 -* Send real-time location information of mobile phone to LoRaWAN network.
255 -* Check LoRaWAN network signal strengh.
256 -* Manually send messages to LoRaWAN network.
257 -)))
280 +[[image:image-20220602105251-15.png]]
258 258  
259 259  
260 260  
284 += 3.  LA66 USB LoRaWAN Adapter =
261 261  
262 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
263 263  
287 +== 3.1  Overview ==
264 264  
265 -A USB to Type-C adapter is needed to connect to a Mobile phone.
289 +[[image:image-20220715001142-3.png||height="145" width="220"]]
266 266  
267 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
291 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
268 268  
269 -[[image:image-20220813174353-2.png||height="360" width="313"]]
293 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
270 270  
295 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
271 271  
297 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
272 272  
273 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
299 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
274 274  
275 275  
276 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
302 +== 3.2  Features ==
277 277  
304 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
305 +* Ultra-long RF range
306 +* Support LoRaWAN v1.0.4 protocol
307 +* Support peer-to-peer protocol
308 +* TCXO crystal to ensure RF performance on low temperature
309 +* Spring RF antenna
310 +* Available in different frequency LoRaWAN frequency bands.
311 +* World-wide unique OTAA keys.
312 +* AT Command via UART-TTL interface
313 +* Firmware upgradable via UART interface
278 278  
279 -[[image:image-20220813173738-1.png]]
315 +== 3.3  Specification ==
280 280  
317 +* CPU: 32-bit 48 MHz
318 +* Flash: 256KB
319 +* RAM: 64KB
320 +* Input Power Range: 5v
321 +* Frequency Range: 150 MHz ~~ 960 MHz
322 +* Maximum Power +22 dBm constant RF output
323 +* High sensitivity: -148 dBm
324 +* Temperature:
325 +** Storage: -55 ~~ +125℃
326 +** Operating: -40 ~~ +85℃
327 +* Humidity:
328 +** Storage: 5 ~~ 95% (Non-Condensing)
329 +** Operating: 10 ~~ 95% (Non-Condensing)
330 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
331 +* LoRa Rx current: <9 mA
281 281  
333 +== 3.4  Pin Mapping & LED ==
282 282  
283 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
284 284  
285 285  
286 -Function and page introduction
337 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
287 287  
288 288  
289 -[[image:image-20220723113448-7.png||height="995" width="450"]]
340 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
290 290  
291 291  
292 -(% style="color:blue" %)**Block Explain:**
343 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
293 293  
294 -1.  Display LA66 USB LoRaWAN Module connection status
295 295  
296 -2.  Check and reconnect
346 +[[image:image-20220602171217-1.png||height="538" width="800"]]
297 297  
298 -3.  Turn send timestamps on or off
299 299  
300 -4.  Display LoRaWan connection status
349 +Open the serial port tool
301 301  
302 -5.  Check LoRaWan connection status
351 +[[image:image-20220602161617-8.png]]
303 303  
304 -6.  The RSSI value of the node when the ACK is received
353 +[[image:image-20220602161718-9.png||height="457" width="800"]]
305 305  
306 -7.  Node's Signal Strength Icon
307 307  
308 -8.  Configure Location Uplink Interval
309 309  
310 -9.  AT command input box
357 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
311 311  
312 -10.  Send Button:  Send input box info to LA66 USB Adapter
359 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
313 313  
314 -11.  Output Log from LA66 USB adapter
315 315  
316 -12.  clear log button
362 +[[image:image-20220602161935-10.png||height="498" width="800"]]
317 317  
318 -13.  exit button
319 319  
320 320  
366 +(% style="color:blue" %)**3. See Uplink Command**
321 321  
322 -LA66 USB LoRaWAN Module not connected
368 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
323 323  
370 +example: AT+SENDB=01,02,8,05820802581ea0a5
324 324  
325 -[[image:image-20220723110520-5.png||height="677" width="508"]]
372 +[[image:image-20220602162157-11.png||height="497" width="800"]]
326 326  
327 327  
328 328  
329 -Connect LA66 USB LoRaWAN Module
376 +(% style="color:blue" %)**4. Check to see if TTN received the message**
330 330  
378 +[[image:image-20220602162331-12.png||height="420" width="800"]]
331 331  
332 -[[image:image-20220723110626-6.png||height="681" width="511"]]
333 333  
334 334  
335 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
382 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
336 336  
337 337  
338 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
385 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
339 339  
340 340  
341 -[[image:image-20220723134549-8.png]]
388 +(% style="color:red" %)**Preconditions:**
342 342  
390 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
343 343  
392 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
344 344  
345 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
346 346  
347 347  
348 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
396 +(% style="color:blue" %)**Steps for usage:**
349 349  
350 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
398 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
351 351  
352 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
400 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
353 353  
354 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
402 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
355 355  
356 356  
357 -Example output in NodeRed is as below:
358 358  
359 -[[image:image-20220723144339-1.png]]
406 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
360 360  
361 361  
362 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
409 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
363 363  
364 364  
365 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
412 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
366 366  
367 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
414 +[[image:image-20220602171233-2.png||height="538" width="800"]]
368 368  
369 -(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
370 370  
371 -[[image:image-20220723150132-2.png]]
372 372  
418 +(% style="color:blue" %)**2. Install Minicom in RPi.**
373 373  
420 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
374 374  
375 -=== (% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** (%%) ===
422 + (% style="background-color:yellow" %)**apt update**
376 376  
424 + (% style="background-color:yellow" %)**apt install minicom**
377 377  
378 -**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
379 379  
380 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
427 +Use minicom to connect to the RPI's terminal
381 381  
382 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
429 +[[image:image-20220602153146-3.png||height="439" width="500"]]
383 383  
384 384  
385 -**2.  Select the COM port corresponding to USB TTL**
386 386  
387 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
433 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
388 388  
435 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
389 389  
390 -**3.  Select the bin file to burn**
391 391  
392 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
438 +[[image:image-20220602154928-5.png||height="436" width="500"]]
393 393  
394 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
395 395  
396 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
397 397  
442 +(% style="color:blue" %)**4. Send Uplink message**
398 398  
399 -**4.  Click to start the download**
444 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
400 400  
401 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
446 +example: AT+SENDB=01,02,8,05820802581ea0a5
402 402  
403 403  
404 -**5.  Check update process**
449 +[[image:image-20220602160339-6.png||height="517" width="600"]]
405 405  
406 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
407 407  
408 408  
409 -**The following picture shows that the burning is successful**
453 +Check to see if TTN received the message
410 410  
411 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
455 +[[image:image-20220602160627-7.png||height="369" width="800"]]
412 412  
413 413  
414 -= 2.  FAQ =
415 415  
416 -== 2.1  How to Compile Source Code for LA66? ==
459 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
417 417  
418 418  
419 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
420 420  
463 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
421 421  
422 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
423 423  
424 424  
425 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
426 426  
468 += 4.  Order Info =
427 427  
428 -== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
429 429  
471 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
430 430  
431 -Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
432 432  
433 -
434 -= 3.  Order Info =
435 -
436 -
437 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
438 -
439 -
440 440  (% style="color:blue" %)**XXX**(%%): The default frequency band
441 441  
442 442  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -449,39 +449,8 @@
449 449  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
450 450  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
451 451  
486 += 5.  Reference =
452 452  
453 -= 4.  Reference =
488 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
454 454  
455 -
456 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
457 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
458 -
459 -
460 -= 5.  FCC Statement =
461 -
462 -
463 -(% style="color:red" %)**FCC Caution:**
464 -
465 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
466 -
467 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
468 -
469 -
470 -(% style="color:red" %)**IMPORTANT NOTE: **
471 -
472 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
473 -
474 -—Reorient or relocate the receiving antenna.
475 -
476 -—Increase the separation between the equipment and receiver.
477 -
478 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
479 -
480 -—Consult the dealer or an experienced radio/TV technician for help.
481 -
482 -
483 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
484 -
485 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
486 -
487 487  
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content