Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 161.2
edited by Xiaoling
on 2023/06/10 08:47
Change comment: There is no comment for this version
To version 93.1
edited by Edwin Chen
on 2022/07/15 00:12
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -6,22 +6,20 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 -
16 -[[image:image-20220715001142-3.png||height="145" width="220"]]
17 -
18 -
19 19  (((
20 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
16 +[[image:image-20220715000242-1.png||height="110" width="132"]]
17 +
18 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
21 21  )))
22 22  
23 23  (((
24 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
22 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 25  )))
26 26  
27 27  (((
... ... @@ -39,28 +39,23 @@
39 39  
40 40  == 1.2  Features ==
41 41  
42 -
43 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 -* Ultra-long RF range
45 45  * Support LoRaWAN v1.0.4 protocol
46 46  * Support peer-to-peer protocol
47 47  * TCXO crystal to ensure RF performance on low temperature
48 -* Spring RF antenna
43 +* SMD Antenna pad and i-pex antenna connector
49 49  * Available in different frequency LoRaWAN frequency bands.
50 50  * World-wide unique OTAA keys.
51 51  * AT Command via UART-TTL interface
52 52  * Firmware upgradable via UART interface
53 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
48 +* Ultra-long RF range
54 54  
55 -
56 -
57 57  == 1.3  Specification ==
58 58  
59 -
60 60  * CPU: 32-bit 48 MHz
61 61  * Flash: 256KB
62 62  * RAM: 64KB
63 -* Input Power Range: 5v
55 +* Input Power Range: 1.8v ~~ 3.7v
56 +* Power Consumption: < 4uA.
64 64  * Frequency Range: 150 MHz ~~ 960 MHz
65 65  * Maximum Power +22 dBm constant RF output
66 66  * High sensitivity: -148 dBm
... ... @@ -72,374 +72,412 @@
72 72  ** Operating: 10 ~~ 95% (Non-Condensing)
73 73  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
74 74  * LoRa Rx current: <9 mA
68 +* I/O Voltage: 3.3v
75 75  
70 +== 1.4  AT Command ==
76 76  
72 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
77 77  
78 -== 1.4  Pin Mapping & LED ==
79 79  
75 +== 1.5  Dimension ==
80 80  
81 -[[image:image-20220813183239-3.png||height="526" width="662"]]
77 +[[image:image-20220517072526-1.png]]
82 82  
83 83  
84 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
85 85  
81 +== 1.6  Pin Mapping ==
86 86  
87 -(((
88 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
89 89  
90 -
91 -)))
84 +[[image:image-20220523101537-1.png]]
92 92  
93 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
94 94  
95 -[[image:image-20220723100027-1.png]]
96 96  
88 +== 1.7  Land Pattern ==
97 97  
98 -Open the serial port tool
90 +[[image:image-20220517072821-2.png]]
99 99  
100 -[[image:image-20220602161617-8.png]]
101 101  
102 102  
103 -[[image:image-20220602161718-9.png||height="457" width="800"]]
94 += 2.  LA66 LoRaWAN Shield =
104 104  
105 105  
106 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
97 +== 2.1  Overview ==
107 107  
108 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
109 109  
110 -[[image:image-20220602161935-10.png||height="498" width="800"]]
100 +[[image:image-20220715000826-2.png||height="386" width="449"]]
111 111  
112 112  
113 -(% style="color:blue" %)**3.  See Uplink Command**
103 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
114 114  
115 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
105 +(((
106 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
107 +)))
116 116  
117 -example: AT+SENDB=01,02,8,05820802581ea0a5
109 +(((
110 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
111 +)))
118 118  
119 -[[image:image-20220602162157-11.png||height="497" width="800"]]
113 +(((
114 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
115 +)))
120 120  
117 +(((
118 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
119 +)))
121 121  
122 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
123 123  
124 -[[image:image-20220817093644-1.png]]
122 +== 2.2  Features ==
125 125  
124 +* Arduino Shield base on LA66 LoRaWAN module
125 +* Support LoRaWAN v1.0.4 protocol
126 +* Support peer-to-peer protocol
127 +* TCXO crystal to ensure RF performance on low temperature
128 +* SMA connector
129 +* Available in different frequency LoRaWAN frequency bands.
130 +* World-wide unique OTAA keys.
131 +* AT Command via UART-TTL interface
132 +* Firmware upgradable via UART interface
133 +* Ultra-long RF range
126 126  
127 -== 1.6  Example: How to join helium ==
135 +== 2.3  Specification ==
128 128  
137 +* CPU: 32-bit 48 MHz
138 +* Flash: 256KB
139 +* RAM: 64KB
140 +* Input Power Range: 1.8v ~~ 3.7v
141 +* Power Consumption: < 4uA.
142 +* Frequency Range: 150 MHz ~~ 960 MHz
143 +* Maximum Power +22 dBm constant RF output
144 +* High sensitivity: -148 dBm
145 +* Temperature:
146 +** Storage: -55 ~~ +125℃
147 +** Operating: -40 ~~ +85℃
148 +* Humidity:
149 +** Storage: 5 ~~ 95% (Non-Condensing)
150 +** Operating: 10 ~~ 95% (Non-Condensing)
151 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
152 +* LoRa Rx current: <9 mA
153 +* I/O Voltage: 3.3v
129 129  
130 -(% style="color:blue" %)**1.  Create a new device.**
155 +== 2.4  Pin Mapping & LED ==
131 131  
132 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
133 133  
134 134  
135 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
159 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
136 136  
137 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
138 138  
139 139  
140 -(% style="color:blue" %)**3.  Use AT commands.**
163 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
141 141  
142 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
143 143  
144 144  
145 -(% style="color:blue" %)**4.  Use the serial port tool**
167 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
146 146  
147 -[[image:image-20220909151517-2.png||height="543" width="708"]]
148 148  
149 149  
150 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
171 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
151 151  
152 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
153 153  
174 +=== 2.8.1  Items needed for update ===
154 154  
155 -(% style="color:blue" %)**6.  Network successfully.**
176 +1. LA66 LoRaWAN Shield
177 +1. Arduino
178 +1. USB TO TTL Adapter
156 156  
157 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
180 +[[image:image-20220602100052-2.png||height="385" width="600"]]
158 158  
159 159  
160 -(% style="color:blue" %)**7.  Send uplink using command**
183 +=== 2.8.2  Connection ===
161 161  
162 -[[image:image-20220912085244-1.png]]
163 163  
164 -[[image:image-20220912085307-2.png]]
186 +[[image:image-20220602101311-3.png||height="276" width="600"]]
165 165  
166 166  
167 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
189 +(((
190 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
191 +)))
168 168  
193 +(((
194 +(% style="background-color:yellow" %)**GND  <-> GND
195 +TXD  <->  TXD
196 +RXD  <->  RXD**
197 +)))
169 169  
170 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
171 171  
200 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
172 172  
173 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
202 +Connect USB TTL Adapter to PC after connecting the wires
174 174  
175 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
176 176  
205 +[[image:image-20220602102240-4.png||height="304" width="600"]]
177 177  
178 -(% style="color:red" %)**Preconditions:**
179 179  
180 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
208 +=== 2.8.3  Upgrade steps ===
181 181  
182 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
183 183  
211 +==== 1.  Switch SW1 to put in ISP position ====
184 184  
185 185  
186 -(% style="color:blue" %)**Steps for usage:**
214 +[[image:image-20220602102824-5.png||height="306" width="600"]]
187 187  
188 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
189 189  
190 -(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
191 191  
192 -(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
218 +==== 2.  Press the RST switch once ====
193 193  
194 194  
195 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
221 +[[image:image-20220602104701-12.png||height="285" width="600"]]
196 196  
197 197  
198 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
199 199  
225 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
200 200  
201 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
202 202  
228 +(((
229 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
230 +)))
203 203  
204 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
205 205  
206 -[[image:image-20220723100439-2.png]]
233 +[[image:image-20220602103227-6.png]]
207 207  
208 208  
209 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
236 +[[image:image-20220602103357-7.png]]
210 210  
211 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
212 212  
213 - (% style="background-color:yellow" %)**apt update**
214 214  
215 - (% style="background-color:yellow" %)**apt install minicom**
240 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
241 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
216 216  
217 -Use minicom to connect to the RPI's terminal
218 218  
219 -[[image:image-20220602153146-3.png||height="439" width="500"]]
244 +[[image:image-20220602103844-8.png]]
220 220  
221 221  
222 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
223 223  
224 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
248 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
249 +(% style="color:blue" %)**3. Select the bin file to burn**
225 225  
226 -[[image:image-20220602154928-5.png||height="436" width="500"]]
227 227  
252 +[[image:image-20220602104144-9.png]]
228 228  
229 -(% style="color:blue" %)**4.  Send Uplink message**
230 230  
231 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
255 +[[image:image-20220602104251-10.png]]
232 232  
233 -example: AT+SENDB=01,02,8,05820802581ea0a5
234 234  
235 -[[image:image-20220602160339-6.png||height="517" width="600"]]
258 +[[image:image-20220602104402-11.png]]
236 236  
237 237  
238 238  
239 -Check to see if TTN received the message
262 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
263 +(% style="color:blue" %)**4. Click to start the download**
240 240  
265 +[[image:image-20220602104923-13.png]]
241 241  
242 -[[image:image-20220602160627-7.png||height="369" width="800"]]
243 243  
244 244  
245 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
269 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
270 +(% style="color:blue" %)**5. Check update process**
246 246  
247 -=== 1.9.1  Hardware and Software Connection ===
248 248  
273 +[[image:image-20220602104948-14.png]]
249 249  
250 250  
251 -==== (% style="color:blue" %)**Overview：**(%%) ====
252 252  
277 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
278 +(% style="color:blue" %)**The following picture shows that the burning is successful**
253 253  
254 -(((
255 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
280 +[[image:image-20220602105251-15.png]]
256 256  
257 -* Send real-time location information of mobile phone to LoRaWAN network.
258 -* Check LoRaWAN network signal strengh.
259 -* Manually send messages to LoRaWAN network.
260 -)))
261 261  
262 262  
284 += 3.  LA66 USB LoRaWAN Adapter =
263 263  
264 264  
265 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
287 +== 3.1  Overview ==
266 266  
289 +[[image:image-20220715001142-3.png||height="145" width="220"]]
267 267  
268 -A USB to Type-C adapter is needed to connect to a Mobile phone.
291 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
269 269  
270 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
293 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
271 271  
272 -[[image:image-20220813174353-2.png||height="360" width="313"]]
295 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
273 273  
297 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
274 274  
299 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
275 275  
276 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
277 277  
302 +== 3.2  Features ==
278 278  
279 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
304 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
305 +* Ultra-long RF range
306 +* Support LoRaWAN v1.0.4 protocol
307 +* Support peer-to-peer protocol
308 +* TCXO crystal to ensure RF performance on low temperature
309 +* Spring RF antenna
310 +* Available in different frequency LoRaWAN frequency bands.
311 +* World-wide unique OTAA keys.
312 +* AT Command via UART-TTL interface
313 +* Firmware upgradable via UART interface
280 280  
315 +== 3.3  Specification ==
281 281  
282 -[[image:image-20220813173738-1.png]]
317 +* CPU: 32-bit 48 MHz
318 +* Flash: 256KB
319 +* RAM: 64KB
320 +* Input Power Range: 5v
321 +* Frequency Range: 150 MHz ~~ 960 MHz
322 +* Maximum Power +22 dBm constant RF output
323 +* High sensitivity: -148 dBm
324 +* Temperature:
325 +** Storage: -55 ~~ +125℃
326 +** Operating: -40 ~~ +85℃
327 +* Humidity:
328 +** Storage: 5 ~~ 95% (Non-Condensing)
329 +** Operating: 10 ~~ 95% (Non-Condensing)
330 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
331 +* LoRa Rx current: <9 mA
283 283  
333 +== 3.4  Pin Mapping & LED ==
284 284  
285 285  
286 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
287 287  
337 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
288 288  
289 -Function and page introduction
290 290  
340 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
291 291  
292 -[[image:image-20220723113448-7.png||height="995" width="450"]]
293 293  
343 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
294 294  
295 -(% style="color:blue" %)**Block Explain:**
296 296  
297 -1.  Display LA66 USB LoRaWAN Module connection status
346 +[[image:image-20220602171217-1.png||height="538" width="800"]]
298 298  
299 -2.  Check and reconnect
300 300  
301 -3.  Turn send timestamps on or off
349 +Open the serial port tool
302 302  
303 -4.  Display LoRaWan connection status
351 +[[image:image-20220602161617-8.png]]
304 304  
305 -5.  Check LoRaWan connection status
353 +[[image:image-20220602161718-9.png||height="457" width="800"]]
306 306  
307 -6.  The RSSI value of the node when the ACK is received
308 308  
309 -7.  Node's Signal Strength Icon
310 310  
311 -8.  Configure Location Uplink Interval
357 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
312 312  
313 -9.  AT command input box
359 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
314 314  
315 -10.  Send Button:  Send input box info to LA66 USB Adapter
316 316  
317 -11.  Output Log from LA66 USB adapter
362 +[[image:image-20220602161935-10.png||height="498" width="800"]]
318 318  
319 -12.  clear log button
320 320  
321 -13.  exit button
322 322  
366 +(% style="color:blue" %)**3. See Uplink Command**
323 323  
368 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
324 324  
325 -LA66 USB LoRaWAN Module not connected
370 +example: AT+SENDB=01,02,8,05820802581ea0a5
326 326  
372 +[[image:image-20220602162157-11.png||height="497" width="800"]]
327 327  
328 -[[image:image-20220723110520-5.png||height="677" width="508"]]
329 329  
330 330  
376 +(% style="color:blue" %)**4. Check to see if TTN received the message**
331 331  
332 -Connect LA66 USB LoRaWAN Module
378 +[[image:image-20220602162331-12.png||height="420" width="800"]]
333 333  
334 334  
335 -[[image:image-20220723110626-6.png||height="681" width="511"]]
336 336  
382 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
337 337  
338 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
339 339  
385 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
340 340  
341 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
342 342  
388 +(% style="color:red" %)**Preconditions:**
343 343  
344 -[[image:image-20220723134549-8.png]]
390 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
345 345  
392 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
346 346  
347 347  
348 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
349 349  
396 +(% style="color:blue" %)**Steps for usage:**
350 350  
351 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
398 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
352 352  
353 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
400 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
354 354  
355 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
402 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
356 356  
357 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
358 358  
359 359  
360 -Example output in NodeRed is as below:
406 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
361 361  
362 -[[image:image-20220723144339-1.png]]
363 363  
409 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
364 364  
365 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
366 366  
412 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
367 367  
368 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
414 +[[image:image-20220602171233-2.png||height="538" width="800"]]
369 369  
370 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
371 371  
372 -(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
373 373  
374 -[[image:image-20220723150132-2.png]]
418 +(% style="color:blue" %)**2. Install Minicom in RPi.**
375 375  
420 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
376 376  
422 + (% style="background-color:yellow" %)**apt update**
377 377  
378 -=== (% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** (%%) ===
424 + (% style="background-color:yellow" %)**apt install minicom**
379 379  
380 380  
381 -**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
427 +Use minicom to connect to the RPI's terminal
382 382  
383 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
429 +[[image:image-20220602153146-3.png||height="439" width="500"]]
384 384  
385 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
386 386  
387 387  
388 -**2.  Select the COM port corresponding to USB TTL**
433 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
389 389  
390 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
435 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
391 391  
392 392  
393 -**3.  Select the bin file to burn**
438 +[[image:image-20220602154928-5.png||height="436" width="500"]]
394 394  
395 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
396 396  
397 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
398 398  
399 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
442 +(% style="color:blue" %)**4. Send Uplink message**
400 400  
444 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
401 401  
402 -**4.  Click to start the download**
446 +example: AT+SENDB=01,02,8,05820802581ea0a5
403 403  
404 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
405 405  
449 +[[image:image-20220602160339-6.png||height="517" width="600"]]
406 406  
407 -**5.  Check update process**
408 408  
409 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
410 410  
453 +Check to see if TTN received the message
411 411  
412 -**The following picture shows that the burning is successful**
455 +[[image:image-20220602160627-7.png||height="369" width="800"]]
413 413  
414 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
415 415  
416 416  
417 -= 2.  FAQ =
459 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
418 418  
419 -== 2.1  How to Compile Source Code for LA66? ==
420 420  
421 421  
422 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
463 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
423 423  
424 424  
425 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
426 426  
427 427  
428 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
468 += 4.  Order Info =
429 429  
430 430  
431 -== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
471 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
432 432  
433 433  
434 -Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
435 -
436 -
437 -= 3.  Order Info =
438 -
439 -
440 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
441 -
442 -
443 443  (% style="color:blue" %)**XXX**(%%): The default frequency band
444 444  
445 445  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -452,41 +452,8 @@
452 452  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
453 453  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
454 454  
486 += 5.  Reference =
455 455  
488 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
456 456  
457 -= 4.  Reference =
458 -
459 -
460 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
461 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
462 -
463 -
464 -
465 -= 5.  FCC Statement =
466 -
467 -
468 -(% style="color:red" %)**FCC Caution:**
469 -
470 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
471 -
472 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
473 -
474 -
475 -(% style="color:red" %)**IMPORTANT NOTE: **
476 -
477 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
478 -
479 -—Reorient or relocate the receiving antenna.
480 -
481 -—Increase the separation between the equipment and receiver.
482 -
483 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
484 -
485 -—Consult the dealer or an experienced radio/TV technician for help.
486 -
487 -
488 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
489 -
490 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
491 -
492 492  
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content