Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 161.1
edited by Bei Jinggeng
on 2023/06/09 18:08
Change comment: There is no comment for this version
To version 146.3
edited by Xiaoling
on 2022/08/16 11:04
Change comment: Update document after refactoring.

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Xiaoling
Content
... ... @@ -6,25 +6,34 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
15 15  
16 -[[image:image-20220715001142-3.png||height="145" width="220"]]
20 +(((
21 +
22 +)))
17 17  
18 -
19 19  (((
20 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
21 21  )))
27 +)))
22 22  
23 23  (((
30 +(((
24 24  (% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 25  )))
33 +)))
26 26  
27 27  (((
36 +(((
28 28  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
29 29  )))
30 30  
... ... @@ -31,26 +31,28 @@
31 31  (((
32 32  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
33 33  )))
43 +)))
34 34  
35 35  (((
46 +(((
36 36  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
37 37  )))
49 +)))
38 38  
39 39  
52 +
40 40  == 1.2  Features ==
41 41  
42 42  
43 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 -* Ultra-long RF range
45 45  * Support LoRaWAN v1.0.4 protocol
46 46  * Support peer-to-peer protocol
47 47  * TCXO crystal to ensure RF performance on low temperature
48 -* Spring RF antenna
59 +* SMD Antenna pad and i-pex antenna connector
49 49  * Available in different frequency LoRaWAN frequency bands.
50 50  * World-wide unique OTAA keys.
51 51  * AT Command via UART-TTL interface
52 52  * Firmware upgradable via UART interface
53 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
64 +* Ultra-long RF range
54 54  
55 55  == 1.3  Specification ==
56 56  
... ... @@ -58,7 +58,8 @@
58 58  * CPU: 32-bit 48 MHz
59 59  * Flash: 256KB
60 60  * RAM: 64KB
61 -* Input Power Range: 5v
72 +* Input Power Range: 1.8v ~~ 3.7v
73 +* Power Consumption: < 4uA.
62 62  * Frequency Range: 150 MHz ~~ 960 MHz
63 63  * Maximum Power +22 dBm constant RF output
64 64  * High sensitivity: -148 dBm
... ... @@ -70,130 +70,449 @@
70 70  ** Operating: 10 ~~ 95% (Non-Condensing)
71 71  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
72 72  * LoRa Rx current: <9 mA
85 +* I/O Voltage: 3.3v
73 73  
74 -== 1.4  Pin Mapping & LED ==
87 +== 1.4  AT Command ==
75 75  
76 76  
77 -[[image:image-20220813183239-3.png||height="526" width="662"]]
90 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
78 78  
79 79  
80 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
81 81  
94 +== 1.5  Dimension ==
82 82  
96 +[[image:image-20220718094750-3.png]]
97 +
98 +
99 +
100 +== 1.6  Pin Mapping ==
101 +
102 +[[image:image-20220720111850-1.png]]
103 +
104 +
105 +
106 +== 1.7  Land Pattern ==
107 +
108 +
109 +[[image:image-20220517072821-2.png]]
110 +
111 +
112 +
113 += 2.  LA66 LoRaWAN Shield =
114 +
115 +
116 +== 2.1  Overview ==
117 +
118 +
83 83  (((
84 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
120 +[[image:image-20220715000826-2.png||height="145" width="220"]]
85 85  )))
86 86  
123 +(((
124 +
125 +)))
87 87  
88 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
127 +(((
128 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
129 +)))
89 89  
131 +(((
132 +(((
133 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
134 +)))
135 +)))
90 90  
91 -[[image:image-20220723100027-1.png]]
137 +(((
138 +(((
139 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
140 +)))
141 +)))
92 92  
143 +(((
144 +(((
145 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
146 +)))
147 +)))
93 93  
94 -Open the serial port tool
149 +(((
150 +(((
151 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
152 +)))
153 +)))
95 95  
96 -[[image:image-20220602161617-8.png]]
97 97  
98 98  
99 -[[image:image-20220602161718-9.png||height="457" width="800"]]
157 +== 2.2  Features ==
100 100  
101 101  
160 +* Arduino Shield base on LA66 LoRaWAN module
161 +* Support LoRaWAN v1.0.4 protocol
162 +* Support peer-to-peer protocol
163 +* TCXO crystal to ensure RF performance on low temperature
164 +* SMA connector
165 +* Available in different frequency LoRaWAN frequency bands.
166 +* World-wide unique OTAA keys.
167 +* AT Command via UART-TTL interface
168 +* Firmware upgradable via UART interface
169 +* Ultra-long RF range
102 102  
103 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
171 +== 2.3  Specification ==
104 104  
105 105  
106 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
174 +* CPU: 32-bit 48 MHz
175 +* Flash: 256KB
176 +* RAM: 64KB
177 +* Input Power Range: 1.8v ~~ 3.7v
178 +* Power Consumption: < 4uA.
179 +* Frequency Range: 150 MHz ~~ 960 MHz
180 +* Maximum Power +22 dBm constant RF output
181 +* High sensitivity: -148 dBm
182 +* Temperature:
183 +** Storage: -55 ~~ +125℃
184 +** Operating: -40 ~~ +85℃
185 +* Humidity:
186 +** Storage: 5 ~~ 95% (Non-Condensing)
187 +** Operating: 10 ~~ 95% (Non-Condensing)
188 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
189 +* LoRa Rx current: <9 mA
190 +* I/O Voltage: 3.3v
107 107  
192 +== 2.4  Pin Mapping & LED ==
108 108  
109 -[[image:image-20220602161935-10.png||height="498" width="800"]]
110 110  
195 +[[image:image-20220814101457-1.png||height="553" width="761"]]
111 111  
197 +~1. The LED lights up red when there is an upstream data packet
198 +2. When the network is successfully connected, the green light will be on for 5 seconds
199 +3. Purple light on when receiving downlink data packets
112 112  
113 -(% style="color:blue" %)**3.  See Uplink Command**
114 114  
115 115  
116 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
203 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
117 117  
118 -example: AT+SENDB=01,02,8,05820802581ea0a5
119 119  
120 -[[image:image-20220602162157-11.png||height="497" width="800"]]
206 +**Show connection diagram：**
121 121  
122 122  
209 +[[image:image-20220723170210-2.png||height="908" width="681"]]
123 123  
124 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
125 125  
126 126  
127 -[[image:image-20220817093644-1.png]]
213 +(% style="color:blue" %)**1.  open Arduino IDE**
128 128  
129 129  
130 -== 1.6  Example: How to join helium ==
216 +[[image:image-20220723170545-4.png]]
131 131  
132 132  
133 133  
134 -(% style="color:blue" %)**1.  Create a new device.**
220 +(% style="color:blue" %)**2.  Open project**
135 135  
136 136  
137 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
223 +LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
138 138  
225 +[[image:image-20220726135239-1.png]]
139 139  
140 140  
141 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
228 +(% style="color:blue" %)**3.  Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload**
142 142  
230 +[[image:image-20220726135356-2.png]]
143 143  
144 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
145 145  
233 +(% style="color:blue" %)**4.  After the upload is successful, open the serial port monitoring and send the AT command**
146 146  
147 147  
148 -(% style="color:blue" %)**3.  Use AT commands.**
236 +[[image:image-20220723172235-7.png||height="480" width="1027"]]
149 149  
150 150  
151 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
152 152  
240 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
153 153  
154 154  
155 -(% style="color:blue" %)**4.  Use the serial port tool**
243 +(% style="color:blue" %)**1.  Open project**
156 156  
157 157  
158 -[[image:image-20220909151517-2.png||height="543" width="708"]]
246 +Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
159 159  
160 160  
249 +[[image:image-20220723172502-8.png]]
161 161  
162 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
163 163  
164 164  
165 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
253 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
166 166  
167 167  
256 +[[image:image-20220723172938-9.png||height="652" width="1050"]]
168 168  
169 -(% style="color:blue" %)**6.  Network successfully.**
170 170  
171 171  
172 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
260 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
173 173  
174 174  
263 +(% style="color:blue" %)**1.  Open project**
175 175  
176 -(% style="color:blue" %)**7.  Send uplink using command**
177 177  
266 +Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
178 178  
179 -[[image:image-20220912085244-1.png]]
180 180  
269 +[[image:image-20220723173341-10.png||height="581" width="1014"]]
181 181  
182 -[[image:image-20220912085307-2.png]]
183 183  
184 184  
273 +(% style="color:blue" %)**2.  Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets**
185 185  
186 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
187 187  
276 +[[image:image-20220723173950-11.png||height="665" width="1012"]]
188 188  
189 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
190 190  
191 191  
280 +(% style="color:blue" %)**3.  Integration into Node-red via TTNV3**
281 +
282 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
283 +
284 +[[image:image-20220723175700-12.png||height="602" width="995"]]
285 +
286 +
287 +
288 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
289 +
290 +
291 +=== 2.8.1  Items needed for update ===
292 +
293 +
294 +1. LA66 LoRaWAN Shield
295 +1. Arduino
296 +1. USB TO TTL Adapter
297 +
298 +[[image:image-20220602100052-2.png||height="385" width="600"]]
299 +
300 +
301 +
302 +=== 2.8.2  Connection ===
303 +
304 +
305 +[[image:image-20220602101311-3.png||height="276" width="600"]]
306 +
307 +
308 +(((
309 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
310 +)))
311 +
312 +(((
313 +(% style="background-color:yellow" %)**GND  <-> GND
314 +TXD  <->  TXD
315 +RXD  <->  RXD**
316 +)))
317 +
318 +
319 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
320 +
321 +Connect USB TTL Adapter to PC after connecting the wires
322 +
323 +
324 +[[image:image-20220602102240-4.png||height="304" width="600"]]
325 +
326 +
327 +
328 +=== 2.8.3  Upgrade steps ===
329 +
330 +
331 +==== (% style="color:blue" %)1.  Switch SW1 to put in ISP position(%%) ====
332 +
333 +
334 +[[image:image-20220602102824-5.png||height="306" width="600"]]
335 +
336 +
337 +
338 +==== (% style="color:blue" %)2.  Press the RST switch once(%%) ====
339 +
340 +
341 +[[image:image-20220602104701-12.png||height="285" width="600"]]
342 +
343 +
344 +
345 +==== (% style="color:blue" %)3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
346 +
347 +
348 +(((
349 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
350 +)))
351 +
352 +
353 +[[image:image-20220602103227-6.png]]
354 +
355 +
356 +[[image:image-20220602103357-7.png]]
357 +
358 +
359 +
360 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
361 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
362 +
363 +
364 +[[image:image-20220602103844-8.png]]
365 +
366 +
367 +
368 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
369 +(% style="color:blue" %)**3. Select the bin file to burn**
370 +
371 +
372 +[[image:image-20220602104144-9.png]]
373 +
374 +
375 +[[image:image-20220602104251-10.png]]
376 +
377 +
378 +[[image:image-20220602104402-11.png]]
379 +
380 +
381 +
382 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
383 +(% style="color:blue" %)**4. Click to start the download**
384 +
385 +[[image:image-20220602104923-13.png]]
386 +
387 +
388 +
389 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
390 +(% style="color:blue" %)**5. Check update process**
391 +
392 +
393 +[[image:image-20220602104948-14.png]]
394 +
395 +
396 +
397 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
398 +(% style="color:blue" %)**The following picture shows that the burning is successful**
399 +
400 +[[image:image-20220602105251-15.png]]
401 +
402 +
403 +
404 += 3.  LA66 USB LoRaWAN Adapter =
405 +
406 +
407 +== 3.1  Overview ==
408 +
409 +
410 +[[image:image-20220715001142-3.png||height="145" width="220"]]
411 +
412 +
413 +(((
414 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
415 +)))
416 +
417 +(((
418 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
419 +)))
420 +
421 +(((
422 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
423 +)))
424 +
425 +(((
426 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
427 +)))
428 +
429 +(((
430 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
431 +)))
432 +
433 +
434 +
435 +== 3.2  Features ==
436 +
437 +
438 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
439 +* Ultra-long RF range
440 +* Support LoRaWAN v1.0.4 protocol
441 +* Support peer-to-peer protocol
442 +* TCXO crystal to ensure RF performance on low temperature
443 +* Spring RF antenna
444 +* Available in different frequency LoRaWAN frequency bands.
445 +* World-wide unique OTAA keys.
446 +* AT Command via UART-TTL interface
447 +* Firmware upgradable via UART interface
448 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
449 +
450 +== 3.3  Specification ==
451 +
452 +
453 +* CPU: 32-bit 48 MHz
454 +* Flash: 256KB
455 +* RAM: 64KB
456 +* Input Power Range: 5v
457 +* Frequency Range: 150 MHz ~~ 960 MHz
458 +* Maximum Power +22 dBm constant RF output
459 +* High sensitivity: -148 dBm
460 +* Temperature:
461 +** Storage: -55 ~~ +125℃
462 +** Operating: -40 ~~ +85℃
463 +* Humidity:
464 +** Storage: 5 ~~ 95% (Non-Condensing)
465 +** Operating: 10 ~~ 95% (Non-Condensing)
466 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
467 +* LoRa Rx current: <9 mA
468 +
469 +== 3.4  Pin Mapping & LED ==
470 +
471 +[[image:image-20220813183239-3.png||height="526" width="662"]]
472 +
473 +
474 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
475 +
476 +
477 +(((
478 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
479 +)))
480 +
481 +
482 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
483 +
484 +
485 +[[image:image-20220723100027-1.png]]
486 +
487 +
488 +Open the serial port tool
489 +
490 +[[image:image-20220602161617-8.png]]
491 +
492 +[[image:image-20220602161718-9.png||height="457" width="800"]]
493 +
494 +
495 +
496 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
497 +
498 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
499 +
500 +
501 +[[image:image-20220602161935-10.png||height="498" width="800"]]
502 +
503 +
504 +
505 +(% style="color:blue" %)**3. See Uplink Command**
506 +
507 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
508 +
509 +example: AT+SENDB=01,02,8,05820802581ea0a5
510 +
511 +[[image:image-20220602162157-11.png||height="497" width="800"]]
512 +
513 +
514 +
515 +(% style="color:blue" %)**4. Check to see if TTN received the message**
516 +
517 +[[image:image-20220602162331-12.png||height="420" width="800"]]
518 +
519 +
520 +
521 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
522 +
523 +
192 192  **Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
193 193  
194 194  (**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
195 195  
196 -
197 197  (% style="color:red" %)**Preconditions:**
198 198  
199 199  (% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
... ... @@ -206,30 +206,26 @@
206 206  
207 207  (% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
208 208  
209 -(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
540 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
210 210  
211 -(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
212 -
213 -
214 214  [[image:image-20220602115852-3.png||height="450" width="1187"]]
215 215  
216 216  
217 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
218 218  
546 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
219 219  
548 +
220 220  Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
221 221  
222 222  
223 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
552 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
224 224  
225 -
226 226  [[image:image-20220723100439-2.png]]
227 227  
228 228  
229 229  
230 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
558 +(% style="color:blue" %)**2. Install Minicom in RPi.**
231 231  
232 -
233 233  (% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
234 234  
235 235   (% style="background-color:yellow" %)**apt update**
... ... @@ -243,9 +243,8 @@
243 243  
244 244  
245 245  
246 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
573 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
247 247  
248 -
249 249  The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
250 250  
251 251  
... ... @@ -253,9 +253,8 @@
253 253  
254 254  
255 255  
256 -(% style="color:blue" %)**4.  Send Uplink message**
582 +(% style="color:blue" %)**4. Send Uplink message**
257 257  
258 -
259 259  Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
260 260  
261 261  example: AT+SENDB=01,02,8,05820802581ea0a5
... ... @@ -267,16 +267,16 @@
267 267  
268 268  Check to see if TTN received the message
269 269  
270 -
271 271  [[image:image-20220602160627-7.png||height="369" width="800"]]
272 272  
273 273  
274 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
275 275  
276 -=== 1.9.1  Hardware and Software Connection ===
599 +== 3.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
277 277  
278 278  
602 +=== 3.8.1  Hardware and Software Connection ===
279 279  
604 +
280 280  ==== (% style="color:blue" %)**Overview：**(%%) ====
281 281  
282 282  
... ... @@ -290,10 +290,8 @@
290 290  
291 291  
292 292  
293 -
294 294  ==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
295 295  
296 -
297 297  A USB to Type-C adapter is needed to connect to a Mobile phone.
298 298  
299 299  Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
... ... @@ -301,26 +301,19 @@
301 301  [[image:image-20220813174353-2.png||height="360" width="313"]]
302 302  
303 303  
304 -
305 305  ==== (% style="color:blue" %)**Download and Install App:**(%%) ====
306 306  
307 -
308 308  [[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
309 309  
310 -
311 311  [[image:image-20220813173738-1.png]]
312 312  
313 313  
314 -
315 315  ==== (% style="color:blue" %)**Use of APP:**(%%) ====
316 316  
317 -
318 318  Function and page introduction
319 319  
320 -
321 321  [[image:image-20220723113448-7.png||height="995" width="450"]]
322 322  
323 -
324 324  **Block Explain:**
325 325  
326 326  1.  Display LA66 USB LoRaWAN Module connection status
... ... @@ -350,10 +350,8 @@
350 350  13.  exit button
351 351  
352 352  
353 -
354 354  LA66 USB LoRaWAN Module not connected
355 355  
356 -
357 357  [[image:image-20220723110520-5.png||height="677" width="508"]]
358 358  
359 359  
... ... @@ -360,16 +360,15 @@
360 360  
361 361  Connect LA66 USB LoRaWAN Module
362 362  
363 -
364 364  [[image:image-20220723110626-6.png||height="681" width="511"]]
365 365  
366 366  
367 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
368 368  
681 +=== 3.8.2 Send data to TTNv3 and plot location info in Node-Red ===
369 369  
683 +
370 370  (% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
371 371  
372 -
373 373  [[image:image-20220723134549-8.png]]
374 374  
375 375  
... ... @@ -376,7 +376,6 @@
376 376  
377 377  (% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
378 378  
379 -
380 380  Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
381 381  
382 382  For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
... ... @@ -383,84 +383,40 @@
383 383  
384 384  After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
385 385  
386 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
387 387  
388 -
389 389  Example output in NodeRed is as below:
390 390  
391 391  [[image:image-20220723144339-1.png]]
392 392  
393 393  
394 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
395 395  
705 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
396 396  
397 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
398 398  
399 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
708 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
400 400  
401 -(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
710 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
402 402  
403 403  [[image:image-20220723150132-2.png]]
404 404  
405 -==== ** Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** ====
406 406  
407 -**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
408 408  
409 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
716 += 4.  FAQ =
410 410  
411 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
412 412  
413 -**2.  Select the COM port corresponding to USB TTL**
719 +== 4.1  How to Compile Source Code for LA66? ==
414 414  
415 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
416 416  
417 -**3.  Select the bin file to burn**
722 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Compile and Upload Code to ASR6601 Platform]]
418 418  
419 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
420 420  
421 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
422 422  
423 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
726 += 5.  Order Info =
424 424  
425 -**4.  Click to start the download**
426 426  
427 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
729 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
428 428  
429 -**5.  Check update process**
430 430  
431 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
432 -
433 -**The following picture shows that the burning is successful**
434 -
435 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
436 -
437 -= 2.  FAQ =
438 -
439 -== 2.1  How to Compile Source Code for LA66? ==
440 -
441 -
442 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
443 -
444 -
445 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
446 -
447 -
448 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
449 -
450 -
451 -== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
452 -
453 -Set the AT+COMMAND:
454 -
455 -AT+UUID=666666666666
456 -
457 -
458 -= 3.  Order Info =
459 -
460 -
461 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
462 -
463 -
464 464  (% style="color:blue" %)**XXX**(%%): The default frequency band
465 465  
466 466  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -473,37 +473,7 @@
473 473  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
474 474  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
475 475  
476 -= 4.  Reference =
744 += 6.  Reference =
477 477  
478 478  
479 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
480 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
481 -
482 -= 5.  FCC Statement =
483 -
484 -
485 -(% style="color:red" %)**FCC Caution:**
486 -
487 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
488 -
489 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
490 -
491 -
492 -(% style="color:red" %)**IMPORTANT NOTE: **
493 -
494 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
495 -
496 -—Reorient or relocate the receiving antenna.
497 -
498 -—Increase the separation between the equipment and receiver.
499 -
500 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
501 -
502 -—Consult the dealer or an experienced radio/TV technician for help.
503 -
504 -
505 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
506 -
507 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
508 -
509 -
747 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content