Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 161.1
edited by Bei Jinggeng
on 2023/06/09 18:08
Change comment: There is no comment for this version
To version 106.1
edited by Herong Lu
on 2022/07/23 10:49
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Lu
Content
... ... @@ -6,25 +6,34 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
15 15  
16 -[[image:image-20220715001142-3.png||height="145" width="220"]]
20 +(((
21 +
22 +)))
17 17  
18 -
19 19  (((
20 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
21 21  )))
27 +)))
22 22  
23 23  (((
30 +(((
24 24  (% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 25  )))
33 +)))
26 26  
27 27  (((
36 +(((
28 28  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
29 29  )))
30 30  
... ... @@ -31,34 +31,36 @@
31 31  (((
32 32  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
33 33  )))
43 +)))
34 34  
35 35  (((
46 +(((
36 36  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
37 37  )))
49 +)))
38 38  
39 39  
52 +
40 40  == 1.2  Features ==
41 41  
42 -
43 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 -* Ultra-long RF range
45 45  * Support LoRaWAN v1.0.4 protocol
46 46  * Support peer-to-peer protocol
47 47  * TCXO crystal to ensure RF performance on low temperature
48 -* Spring RF antenna
58 +* SMD Antenna pad and i-pex antenna connector
49 49  * Available in different frequency LoRaWAN frequency bands.
50 50  * World-wide unique OTAA keys.
51 51  * AT Command via UART-TTL interface
52 52  * Firmware upgradable via UART interface
53 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
63 +* Ultra-long RF range
54 54  
65 +
55 55  == 1.3  Specification ==
56 56  
57 -
58 58  * CPU: 32-bit 48 MHz
59 59  * Flash: 256KB
60 60  * RAM: 64KB
61 -* Input Power Range: 5v
71 +* Input Power Range: 1.8v ~~ 3.7v
72 +* Power Consumption: < 4uA.
62 62  * Frequency Range: 150 MHz ~~ 960 MHz
63 63  * Maximum Power +22 dBm constant RF output
64 64  * High sensitivity: -148 dBm
... ... @@ -70,397 +70,469 @@
70 70  ** Operating: 10 ~~ 95% (Non-Condensing)
71 71  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
72 72  * LoRa Rx current: <9 mA
84 +* I/O Voltage: 3.3v
73 73  
74 -== 1.4  Pin Mapping & LED ==
75 75  
87 +== 1.4  AT Command ==
76 76  
77 -[[image:image-20220813183239-3.png||height="526" width="662"]]
78 78  
90 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
79 79  
80 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
81 81  
82 82  
83 -(((
84 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
85 -)))
94 +== 1.5  Dimension ==
86 86  
96 +[[image:image-20220718094750-3.png]]
87 87  
88 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
89 89  
90 90  
91 -[[image:image-20220723100027-1.png]]
100 +== 1.6  Pin Mapping ==
92 92  
102 +[[image:image-20220720111850-1.png]]
93 93  
94 -Open the serial port tool
95 95  
96 -[[image:image-20220602161617-8.png]]
97 97  
106 +== 1.7  Land Pattern ==
98 98  
99 -[[image:image-20220602161718-9.png||height="457" width="800"]]
108 +[[image:image-20220517072821-2.png]]
100 100  
101 101  
102 102  
103 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
112 += 2.  LA66 LoRaWAN Shield =
104 104  
105 105  
106 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
115 +== 2.1  Overview ==
107 107  
108 108  
109 -[[image:image-20220602161935-10.png||height="498" width="800"]]
118 +(((
119 +[[image:image-20220715000826-2.png||height="145" width="220"]]
120 +)))
110 110  
122 +(((
123 +
124 +)))
111 111  
126 +(((
127 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
128 +)))
112 112  
113 -(% style="color:blue" %)**3.  See Uplink Command**
130 +(((
131 +(((
132 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
133 +)))
134 +)))
114 114  
136 +(((
137 +(((
138 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
139 +)))
140 +)))
115 115  
116 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
142 +(((
143 +(((
144 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
145 +)))
146 +)))
117 117  
118 -example: AT+SENDB=01,02,8,05820802581ea0a5
148 +(((
149 +(((
150 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
151 +)))
152 +)))
119 119  
120 -[[image:image-20220602162157-11.png||height="497" width="800"]]
121 121  
122 122  
156 +== 2.2  Features ==
123 123  
124 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
158 +* Arduino Shield base on LA66 LoRaWAN module
159 +* Support LoRaWAN v1.0.4 protocol
160 +* Support peer-to-peer protocol
161 +* TCXO crystal to ensure RF performance on low temperature
162 +* SMA connector
163 +* Available in different frequency LoRaWAN frequency bands.
164 +* World-wide unique OTAA keys.
165 +* AT Command via UART-TTL interface
166 +* Firmware upgradable via UART interface
167 +* Ultra-long RF range
125 125  
126 126  
127 -[[image:image-20220817093644-1.png]]
170 +== 2.3  Specification ==
128 128  
172 +* CPU: 32-bit 48 MHz
173 +* Flash: 256KB
174 +* RAM: 64KB
175 +* Input Power Range: 1.8v ~~ 3.7v
176 +* Power Consumption: < 4uA.
177 +* Frequency Range: 150 MHz ~~ 960 MHz
178 +* Maximum Power +22 dBm constant RF output
179 +* High sensitivity: -148 dBm
180 +* Temperature:
181 +** Storage: -55 ~~ +125℃
182 +** Operating: -40 ~~ +85℃
183 +* Humidity:
184 +** Storage: 5 ~~ 95% (Non-Condensing)
185 +** Operating: 10 ~~ 95% (Non-Condensing)
186 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
187 +* LoRa Rx current: <9 mA
188 +* I/O Voltage: 3.3v
129 129  
130 -== 1.6  Example: How to join helium ==
131 131  
191 +== 2.4  Pin Mapping & LED ==
132 132  
133 133  
134 -(% style="color:blue" %)**1.  Create a new device.**
135 135  
195 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
136 136  
137 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
138 138  
139 139  
199 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
140 140  
141 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
142 142  
143 143  
144 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
203 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
145 145  
146 146  
147 147  
148 -(% style="color:blue" %)**3.  Use AT commands.**
207 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
149 149  
150 150  
151 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
210 +=== 2.8.1  Items needed for update ===
152 152  
212 +1. LA66 LoRaWAN Shield
213 +1. Arduino
214 +1. USB TO TTL Adapter
153 153  
216 +[[image:image-20220602100052-2.png||height="385" width="600"]]
154 154  
155 -(% style="color:blue" %)**4.  Use the serial port tool**
156 156  
219 +=== 2.8.2  Connection ===
157 157  
158 -[[image:image-20220909151517-2.png||height="543" width="708"]]
159 159  
222 +[[image:image-20220602101311-3.png||height="276" width="600"]]
160 160  
161 161  
162 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
225 +(((
226 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
227 +)))
163 163  
229 +(((
230 +(% style="background-color:yellow" %)**GND  <-> GND
231 +TXD  <->  TXD
232 +RXD  <->  RXD**
233 +)))
164 164  
165 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
166 166  
236 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
167 167  
238 +Connect USB TTL Adapter to PC after connecting the wires
168 168  
169 -(% style="color:blue" %)**6.  Network successfully.**
170 170  
241 +[[image:image-20220602102240-4.png||height="304" width="600"]]
171 171  
172 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
173 173  
244 +=== 2.8.3  Upgrade steps ===
174 174  
175 175  
176 -(% style="color:blue" %)**7.  Send uplink using command**
247 +==== 1.  Switch SW1 to put in ISP position ====
177 177  
178 178  
179 -[[image:image-20220912085244-1.png]]
250 +[[image:image-20220602102824-5.png||height="306" width="600"]]
180 180  
181 181  
182 -[[image:image-20220912085307-2.png]]
183 183  
254 +==== 2.  Press the RST switch once ====
184 184  
185 185  
186 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
257 +[[image:image-20220602104701-12.png||height="285" width="600"]]
187 187  
188 188  
189 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
190 190  
261 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
191 191  
192 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
193 193  
194 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
264 +(((
265 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
266 +)))
195 195  
196 196  
197 -(% style="color:red" %)**Preconditions:**
269 +[[image:image-20220602103227-6.png]]
198 198  
199 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
200 200  
201 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
272 +[[image:image-20220602103357-7.png]]
202 202  
203 203  
204 204  
205 -(% style="color:blue" %)**Steps for usage:**
276 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
277 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
206 206  
207 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
208 208  
209 -(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
280 +[[image:image-20220602103844-8.png]]
210 210  
211 -(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
212 212  
213 213  
214 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
284 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
285 +(% style="color:blue" %)**3. Select the bin file to burn**
215 215  
216 216  
217 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
288 +[[image:image-20220602104144-9.png]]
218 218  
219 219  
220 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
291 +[[image:image-20220602104251-10.png]]
221 221  
222 222  
223 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
294 +[[image:image-20220602104402-11.png]]
224 224  
225 225  
226 -[[image:image-20220723100439-2.png]]
227 227  
298 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
299 +(% style="color:blue" %)**4. Click to start the download**
228 228  
301 +[[image:image-20220602104923-13.png]]
229 229  
230 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
231 231  
232 232  
233 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
305 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
306 +(% style="color:blue" %)**5. Check update process**
234 234  
235 - (% style="background-color:yellow" %)**apt update**
236 236  
237 - (% style="background-color:yellow" %)**apt install minicom**
309 +[[image:image-20220602104948-14.png]]
238 238  
239 239  
240 -Use minicom to connect to the RPI's terminal
241 241  
242 -[[image:image-20220602153146-3.png||height="439" width="500"]]
313 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
314 +(% style="color:blue" %)**The following picture shows that the burning is successful**
243 243  
316 +[[image:image-20220602105251-15.png]]
244 244  
245 245  
246 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
247 247  
320 += 3.  LA66 USB LoRaWAN Adapter =
248 248  
249 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
250 250  
323 +== 3.1  Overview ==
251 251  
252 -[[image:image-20220602154928-5.png||height="436" width="500"]]
253 253  
326 +[[image:image-20220715001142-3.png||height="145" width="220"]]
254 254  
255 255  
256 -(% style="color:blue" %)**4.  Send Uplink message**
329 +(((
330 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
331 +)))
257 257  
333 +(((
334 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
335 +)))
258 258  
259 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
337 +(((
338 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
339 +)))
260 260  
261 -example: AT+SENDB=01,02,8,05820802581ea0a5
341 +(((
342 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
343 +)))
262 262  
345 +(((
346 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
347 +)))
263 263  
264 -[[image:image-20220602160339-6.png||height="517" width="600"]]
265 265  
266 266  
351 +== 3.2  Features ==
267 267  
268 -Check to see if TTN received the message
353 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
354 +* Ultra-long RF range
355 +* Support LoRaWAN v1.0.4 protocol
356 +* Support peer-to-peer protocol
357 +* TCXO crystal to ensure RF performance on low temperature
358 +* Spring RF antenna
359 +* Available in different frequency LoRaWAN frequency bands.
360 +* World-wide unique OTAA keys.
361 +* AT Command via UART-TTL interface
362 +* Firmware upgradable via UART interface
363 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
269 269  
270 270  
271 -[[image:image-20220602160627-7.png||height="369" width="800"]]
366 +== 3.3  Specification ==
272 272  
368 +* CPU: 32-bit 48 MHz
369 +* Flash: 256KB
370 +* RAM: 64KB
371 +* Input Power Range: 5v
372 +* Frequency Range: 150 MHz ~~ 960 MHz
373 +* Maximum Power +22 dBm constant RF output
374 +* High sensitivity: -148 dBm
375 +* Temperature:
376 +** Storage: -55 ~~ +125℃
377 +** Operating: -40 ~~ +85℃
378 +* Humidity:
379 +** Storage: 5 ~~ 95% (Non-Condensing)
380 +** Operating: 10 ~~ 95% (Non-Condensing)
381 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
382 +* LoRa Rx current: <9 mA
273 273  
274 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
275 275  
276 -=== 1.9.1  Hardware and Software Connection ===
385 +== 3.4  Pin Mapping & LED ==
277 277  
278 278  
279 279  
280 -==== (% style="color:blue" %)**Overview：**(%%) ====
389 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
281 281  
282 282  
283 283  (((
284 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
285 -
286 -* Send real-time location information of mobile phone to LoRaWAN network.
287 -* Check LoRaWAN network signal strengh.
288 -* Manually send messages to LoRaWAN network.
393 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
289 289  )))
290 290  
291 291  
397 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
292 292  
293 293  
294 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
400 +[[image:image-20220723100027-1.png]]
295 295  
296 296  
297 -A USB to Type-C adapter is needed to connect to a Mobile phone.
403 +Open the serial port tool
298 298  
299 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
405 +[[image:image-20220602161617-8.png]]
300 300  
301 -[[image:image-20220813174353-2.png||height="360" width="313"]]
407 +[[image:image-20220602161718-9.png||height="457" width="800"]]
302 302  
303 303  
304 304  
305 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
411 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
306 306  
413 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
307 307  
308 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
309 309  
416 +[[image:image-20220602161935-10.png||height="498" width="800"]]
310 310  
311 -[[image:image-20220813173738-1.png]]
312 312  
313 313  
420 +(% style="color:blue" %)**3. See Uplink Command**
314 314  
315 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
422 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
316 316  
424 +example: AT+SENDB=01,02,8,05820802581ea0a5
317 317  
318 -Function and page introduction
426 +[[image:image-20220602162157-11.png||height="497" width="800"]]
319 319  
320 320  
321 -[[image:image-20220723113448-7.png||height="995" width="450"]]
322 322  
430 +(% style="color:blue" %)**4. Check to see if TTN received the message**
323 323  
324 -**Block Explain:**
432 +[[image:image-20220602162331-12.png||height="420" width="800"]]
325 325  
326 -1.  Display LA66 USB LoRaWAN Module connection status
327 327  
328 -2.  Check and reconnect
329 329  
330 -3.  Turn send timestamps on or off
436 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
331 331  
332 -4.  Display LoRaWan connection status
333 333  
334 -5.  Check LoRaWan connection status
439 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
335 335  
336 -6.  The RSSI value of the node when the ACK is received
441 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
337 337  
338 -7.  Node's Signal Strength Icon
443 +(% style="color:red" %)**Preconditions:**
339 339  
340 -8.  Configure Location Uplink Interval
445 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
341 341  
342 -9.  AT command input box
447 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
343 343  
344 -10.  Send Button:  Send input box info to LA66 USB Adapter
345 345  
346 -11.  Output Log from LA66 USB adapter
347 347  
348 -12.  clear log button
451 +(% style="color:blue" %)**Steps for usage:**
349 349  
350 -13.  exit button
453 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
351 351  
455 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
352 352  
457 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
353 353  
354 -LA66 USB LoRaWAN Module not connected
355 355  
356 356  
357 -[[image:image-20220723110520-5.png||height="677" width="508"]]
461 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
358 358  
359 359  
464 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
360 360  
361 -Connect LA66 USB LoRaWAN Module
362 362  
467 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
363 363  
364 -[[image:image-20220723110626-6.png||height="681" width="511"]]
469 +[[image:image-20220723100439-2.png]]
365 365  
366 366  
367 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
368 368  
473 +(% style="color:blue" %)**2. Install Minicom in RPi.**
369 369  
370 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
475 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
371 371  
477 + (% style="background-color:yellow" %)**apt update**
372 372  
373 -[[image:image-20220723134549-8.png]]
479 + (% style="background-color:yellow" %)**apt install minicom**
374 374  
375 375  
482 +Use minicom to connect to the RPI's terminal
376 376  
377 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
484 +[[image:image-20220602153146-3.png||height="439" width="500"]]
378 378  
379 379  
380 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
381 381  
382 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
488 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
383 383  
384 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
490 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
385 385  
386 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
387 387  
493 +[[image:image-20220602154928-5.png||height="436" width="500"]]
388 388  
389 -Example output in NodeRed is as below:
390 390  
391 -[[image:image-20220723144339-1.png]]
392 392  
497 +(% style="color:blue" %)**4. Send Uplink message**
393 393  
394 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
499 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
395 395  
501 +example: AT+SENDB=01,02,8,05820802581ea0a5
396 396  
397 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
398 398  
399 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
504 +[[image:image-20220602160339-6.png||height="517" width="600"]]
400 400  
401 -(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
402 402  
403 -[[image:image-20220723150132-2.png]]
404 404  
405 -==== ** Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** ====
508 +Check to see if TTN received the message
406 406  
407 -**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
510 +[[image:image-20220602160627-7.png||height="369" width="800"]]
408 408  
409 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
410 410  
411 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
412 412  
413 -**2.  Select the COM port corresponding to USB TTL**
514 +== 3.8  Example: Use of LA66 USB LoRaWAN Module and DRAGINO-LA66-APP. ==
414 414  
415 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
516 +=== 3.8.1 DRAGINO-LA66-APP ===
416 416  
417 -**3.  Select the bin file to burn**
518 +[[image:image-20220723102027-3.png]]
418 418  
419 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
520 +==== Overview： ====
420 420  
421 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
522 +DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Module. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Module.（DRAGINO-LA66-APP currently only supports Android system）
422 422  
423 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
524 +==== Conditions of Use： ====
424 424  
425 -**4.  Click to start the download**
526 +Requires a type-c to USB adapter
426 426  
427 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
528 +[[image:image-20220723104754-4.png]]
428 428  
429 -**5.  Check update process**
530 +==== Use of APP: ====
430 430  
431 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
532 +LA66 USB LoRaWAN Module not connected
432 432  
433 -**The following picture shows that the burning is successful**
434 434  
435 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
436 436  
437 -= 2.  FAQ =
536 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
438 438  
439 -== 2.1  How to Compile Source Code for LA66? ==
440 440  
441 441  
442 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
443 443  
541 += 4.  Order Info =
444 444  
445 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
446 446  
544 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
447 447  
448 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
449 449  
450 -
451 -== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
452 -
453 -Set the AT+COMMAND:
454 -
455 -AT+UUID=666666666666
456 -
457 -
458 -= 3.  Order Info =
459 -
460 -
461 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
462 -
463 -
464 464  (% style="color:blue" %)**XXX**(%%): The default frequency band
465 465  
466 466  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -473,37 +473,6 @@
473 473  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
474 474  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
475 475  
476 -= 4.  Reference =
559 += 5.  Reference =
477 477  
478 -
479 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
480 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
481 -
482 -= 5.  FCC Statement =
483 -
484 -
485 -(% style="color:red" %)**FCC Caution:**
486 -
487 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
488 -
489 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
490 -
491 -
492 -(% style="color:red" %)**IMPORTANT NOTE: **
493 -
494 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
495 -
496 -—Reorient or relocate the receiving antenna.
497 -
498 -—Increase the separation between the equipment and receiver.
499 -
500 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
501 -
502 -—Consult the dealer or an experienced radio/TV technician for help.
503 -
504 -
505 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
506 -
507 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
508 -
509 -
561 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content