Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 161.1
edited by Bei Jinggeng
on 2023/06/09 18:08
Change comment: There is no comment for this version
To version 102.1
edited by Herong Lu
on 2022/07/23 10:00
Change comment: Uploaded new attachment "image-20220723100027-1.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Lu
Content
... ... @@ -6,25 +6,34 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
15 15  
16 -[[image:image-20220715001142-3.png||height="145" width="220"]]
20 +(((
21 +
22 +)))
17 17  
18 -
19 19  (((
20 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
21 21  )))
27 +)))
22 22  
23 23  (((
30 +(((
24 24  (% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 25  )))
33 +)))
26 26  
27 27  (((
36 +(((
28 28  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
29 29  )))
30 30  
... ... @@ -31,34 +31,37 @@
31 31  (((
32 32  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
33 33  )))
43 +)))
34 34  
35 35  (((
46 +(((
36 36  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
37 37  )))
49 +)))
38 38  
39 39  
52 +
40 40  == 1.2  Features ==
41 41  
42 -
43 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 -* Ultra-long RF range
45 45  * Support LoRaWAN v1.0.4 protocol
46 46  * Support peer-to-peer protocol
47 47  * TCXO crystal to ensure RF performance on low temperature
48 -* Spring RF antenna
58 +* SMD Antenna pad and i-pex antenna connector
49 49  * Available in different frequency LoRaWAN frequency bands.
50 50  * World-wide unique OTAA keys.
51 51  * AT Command via UART-TTL interface
52 52  * Firmware upgradable via UART interface
53 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
63 +* Ultra-long RF range
54 54  
55 -== 1.3  Specification ==
56 56  
57 57  
67 +== 1.3  Specification ==
68 +
58 58  * CPU: 32-bit 48 MHz
59 59  * Flash: 256KB
60 60  * RAM: 64KB
61 -* Input Power Range: 5v
72 +* Input Power Range: 1.8v ~~ 3.7v
73 +* Power Consumption: < 4uA.
62 62  * Frequency Range: 150 MHz ~~ 960 MHz
63 63  * Maximum Power +22 dBm constant RF output
64 64  * High sensitivity: -148 dBm
... ... @@ -70,397 +70,455 @@
70 70  ** Operating: 10 ~~ 95% (Non-Condensing)
71 71  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
72 72  * LoRa Rx current: <9 mA
85 +* I/O Voltage: 3.3v
73 73  
74 -== 1.4  Pin Mapping & LED ==
75 75  
76 76  
77 -[[image:image-20220813183239-3.png||height="526" width="662"]]
89 +== 1.4  AT Command ==
78 78  
79 79  
80 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
92 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
81 81  
82 82  
83 -(((
84 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
85 -)))
86 86  
96 +== 1.5  Dimension ==
87 87  
88 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
98 +[[image:image-20220718094750-3.png]]
89 89  
90 90  
91 -[[image:image-20220723100027-1.png]]
92 92  
102 +== 1.6  Pin Mapping ==
93 93  
94 -Open the serial port tool
104 +[[image:image-20220720111850-1.png]]
95 95  
96 -[[image:image-20220602161617-8.png]]
97 97  
98 98  
99 -[[image:image-20220602161718-9.png||height="457" width="800"]]
108 +== 1.7  Land Pattern ==
100 100  
110 +[[image:image-20220517072821-2.png]]
101 101  
102 102  
103 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
104 104  
114 += 2.  LA66 LoRaWAN Shield =
105 105  
106 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
107 107  
117 +== 2.1  Overview ==
108 108  
109 -[[image:image-20220602161935-10.png||height="498" width="800"]]
110 110  
120 +(((
121 +[[image:image-20220715000826-2.png||height="145" width="220"]]
122 +)))
111 111  
124 +(((
125 +
126 +)))
112 112  
113 -(% style="color:blue" %)**3.  See Uplink Command**
128 +(((
129 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
130 +)))
114 114  
132 +(((
133 +(((
134 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
135 +)))
136 +)))
115 115  
116 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
138 +(((
139 +(((
140 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
141 +)))
142 +)))
117 117  
118 -example: AT+SENDB=01,02,8,05820802581ea0a5
144 +(((
145 +(((
146 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
147 +)))
148 +)))
119 119  
120 -[[image:image-20220602162157-11.png||height="497" width="800"]]
150 +(((
151 +(((
152 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
153 +)))
154 +)))
121 121  
122 122  
123 123  
124 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
158 +== 2.2  Features ==
125 125  
160 +* Arduino Shield base on LA66 LoRaWAN module
161 +* Support LoRaWAN v1.0.4 protocol
162 +* Support peer-to-peer protocol
163 +* TCXO crystal to ensure RF performance on low temperature
164 +* SMA connector
165 +* Available in different frequency LoRaWAN frequency bands.
166 +* World-wide unique OTAA keys.
167 +* AT Command via UART-TTL interface
168 +* Firmware upgradable via UART interface
169 +* Ultra-long RF range
126 126  
127 -[[image:image-20220817093644-1.png]]
128 128  
129 129  
130 -== 1.6  Example: How to join helium ==
173 +== 2.3  Specification ==
131 131  
175 +* CPU: 32-bit 48 MHz
176 +* Flash: 256KB
177 +* RAM: 64KB
178 +* Input Power Range: 1.8v ~~ 3.7v
179 +* Power Consumption: < 4uA.
180 +* Frequency Range: 150 MHz ~~ 960 MHz
181 +* Maximum Power +22 dBm constant RF output
182 +* High sensitivity: -148 dBm
183 +* Temperature:
184 +** Storage: -55 ~~ +125℃
185 +** Operating: -40 ~~ +85℃
186 +* Humidity:
187 +** Storage: 5 ~~ 95% (Non-Condensing)
188 +** Operating: 10 ~~ 95% (Non-Condensing)
189 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
190 +* LoRa Rx current: <9 mA
191 +* I/O Voltage: 3.3v
132 132  
133 133  
134 -(% style="color:blue" %)**1.  Create a new device.**
135 135  
195 +== 2.4  Pin Mapping & LED ==
136 136  
137 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
138 138  
139 139  
199 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
140 140  
141 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
142 142  
143 143  
144 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
203 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
145 145  
146 146  
147 147  
148 -(% style="color:blue" %)**3.  Use AT commands.**
207 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
149 149  
150 150  
151 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
152 152  
211 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
153 153  
154 154  
155 -(% style="color:blue" %)**4.  Use the serial port tool**
214 +=== 2.8.1  Items needed for update ===
156 156  
216 +1. LA66 LoRaWAN Shield
217 +1. Arduino
218 +1. USB TO TTL Adapter
157 157  
158 -[[image:image-20220909151517-2.png||height="543" width="708"]]
220 +[[image:image-20220602100052-2.png||height="385" width="600"]]
159 159  
160 160  
223 +=== 2.8.2  Connection ===
161 161  
162 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
163 163  
226 +[[image:image-20220602101311-3.png||height="276" width="600"]]
164 164  
165 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
166 166  
229 +(((
230 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
231 +)))
167 167  
233 +(((
234 +(% style="background-color:yellow" %)**GND  <-> GND
235 +TXD  <->  TXD
236 +RXD  <->  RXD**
237 +)))
168 168  
169 -(% style="color:blue" %)**6.  Network successfully.**
170 170  
240 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
171 171  
172 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
242 +Connect USB TTL Adapter to PC after connecting the wires
173 173  
174 174  
245 +[[image:image-20220602102240-4.png||height="304" width="600"]]
175 175  
176 -(% style="color:blue" %)**7.  Send uplink using command**
177 177  
248 +=== 2.8.3  Upgrade steps ===
178 178  
179 -[[image:image-20220912085244-1.png]]
180 180  
251 +==== 1.  Switch SW1 to put in ISP position ====
181 181  
182 -[[image:image-20220912085307-2.png]]
183 183  
254 +[[image:image-20220602102824-5.png||height="306" width="600"]]
184 184  
185 185  
186 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
187 187  
258 +==== 2.  Press the RST switch once ====
188 188  
189 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
190 190  
261 +[[image:image-20220602104701-12.png||height="285" width="600"]]
191 191  
192 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
193 193  
194 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
195 195  
265 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
196 196  
197 -(% style="color:red" %)**Preconditions:**
198 198  
199 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
268 +(((
269 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
270 +)))
200 200  
201 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
202 202  
273 +[[image:image-20220602103227-6.png]]
203 203  
204 204  
205 -(% style="color:blue" %)**Steps for usage:**
276 +[[image:image-20220602103357-7.png]]
206 206  
207 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
208 208  
209 -(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
210 210  
211 -(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
280 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
281 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
212 212  
213 213  
214 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
284 +[[image:image-20220602103844-8.png]]
215 215  
216 216  
217 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
218 218  
288 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
289 +(% style="color:blue" %)**3. Select the bin file to burn**
219 219  
220 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
221 221  
292 +[[image:image-20220602104144-9.png]]
222 222  
223 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
224 224  
295 +[[image:image-20220602104251-10.png]]
225 225  
226 -[[image:image-20220723100439-2.png]]
227 227  
298 +[[image:image-20220602104402-11.png]]
228 228  
229 229  
230 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
231 231  
302 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
303 +(% style="color:blue" %)**4. Click to start the download**
232 232  
233 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
305 +[[image:image-20220602104923-13.png]]
234 234  
235 - (% style="background-color:yellow" %)**apt update**
236 236  
237 - (% style="background-color:yellow" %)**apt install minicom**
238 238  
309 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
310 +(% style="color:blue" %)**5. Check update process**
239 239  
240 -Use minicom to connect to the RPI's terminal
241 241  
242 -[[image:image-20220602153146-3.png||height="439" width="500"]]
313 +[[image:image-20220602104948-14.png]]
243 243  
244 244  
245 245  
246 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
317 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
318 +(% style="color:blue" %)**The following picture shows that the burning is successful**
247 247  
320 +[[image:image-20220602105251-15.png]]
248 248  
249 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
250 250  
251 251  
252 -[[image:image-20220602154928-5.png||height="436" width="500"]]
324 += 3.  LA66 USB LoRaWAN Adapter =
253 253  
254 254  
327 +== 3.1  Overview ==
255 255  
256 -(% style="color:blue" %)**4.  Send Uplink message**
257 257  
330 +[[image:image-20220715001142-3.png||height="145" width="220"]]
258 258  
259 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
260 260  
261 -example: AT+SENDB=01,02,8,05820802581ea0a5
333 +(((
334 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
335 +)))
262 262  
337 +(((
338 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
339 +)))
263 263  
264 -[[image:image-20220602160339-6.png||height="517" width="600"]]
341 +(((
342 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
343 +)))
265 265  
266 -
267 -
268 -Check to see if TTN received the message
269 -
270 -
271 -[[image:image-20220602160627-7.png||height="369" width="800"]]
272 -
273 -
274 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
275 -
276 -=== 1.9.1  Hardware and Software Connection ===
277 -
278 -
279 -
280 -==== (% style="color:blue" %)**Overview：**(%%) ====
281 -
282 -
283 283  (((
284 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
346 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
347 +)))
285 285  
286 -* Send real-time location information of mobile phone to LoRaWAN network.
287 -* Check LoRaWAN network signal strengh.
288 -* Manually send messages to LoRaWAN network.
349 +(((
350 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
289 289  )))
290 290  
291 291  
292 292  
355 +== 3.2  Features ==
293 293  
294 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
357 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
358 +* Ultra-long RF range
359 +* Support LoRaWAN v1.0.4 protocol
360 +* Support peer-to-peer protocol
361 +* TCXO crystal to ensure RF performance on low temperature
362 +* Spring RF antenna
363 +* Available in different frequency LoRaWAN frequency bands.
364 +* World-wide unique OTAA keys.
365 +* AT Command via UART-TTL interface
366 +* Firmware upgradable via UART interface
367 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
295 295  
296 296  
297 -A USB to Type-C adapter is needed to connect to a Mobile phone.
298 298  
299 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
371 +== 3.3  Specification ==
300 300  
301 -[[image:image-20220813174353-2.png||height="360" width="313"]]
373 +* CPU: 32-bit 48 MHz
374 +* Flash: 256KB
375 +* RAM: 64KB
376 +* Input Power Range: 5v
377 +* Frequency Range: 150 MHz ~~ 960 MHz
378 +* Maximum Power +22 dBm constant RF output
379 +* High sensitivity: -148 dBm
380 +* Temperature:
381 +** Storage: -55 ~~ +125℃
382 +** Operating: -40 ~~ +85℃
383 +* Humidity:
384 +** Storage: 5 ~~ 95% (Non-Condensing)
385 +** Operating: 10 ~~ 95% (Non-Condensing)
386 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
387 +* LoRa Rx current: <9 mA
302 302  
303 303  
304 304  
305 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
391 +== 3.4  Pin Mapping & LED ==
306 306  
307 307  
308 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
309 309  
395 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
310 310  
311 -[[image:image-20220813173738-1.png]]
312 312  
398 +(((
399 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
400 +)))
313 313  
314 314  
315 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
403 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
316 316  
317 317  
318 -Function and page introduction
406 +[[image:image-20220602171217-1.png||height="538" width="800"]]
319 319  
320 320  
321 -[[image:image-20220723113448-7.png||height="995" width="450"]]
409 +Open the serial port tool
322 322  
411 +[[image:image-20220602161617-8.png]]
323 323  
324 -**Block Explain:**
413 +[[image:image-20220602161718-9.png||height="457" width="800"]]
325 325  
326 -1.  Display LA66 USB LoRaWAN Module connection status
327 327  
328 -2.  Check and reconnect
329 329  
330 -3.  Turn send timestamps on or off
417 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
331 331  
332 -4.  Display LoRaWan connection status
419 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
333 333  
334 -5.  Check LoRaWan connection status
335 335  
336 -6.  The RSSI value of the node when the ACK is received
422 +[[image:image-20220602161935-10.png||height="498" width="800"]]
337 337  
338 -7.  Node's Signal Strength Icon
339 339  
340 -8.  Configure Location Uplink Interval
341 341  
342 -9.  AT command input box
426 +(% style="color:blue" %)**3. See Uplink Command**
343 343  
344 -10.  Send Button:  Send input box info to LA66 USB Adapter
428 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
345 345  
346 -11.  Output Log from LA66 USB adapter
430 +example: AT+SENDB=01,02,8,05820802581ea0a5
347 347  
348 -12.  clear log button
432 +[[image:image-20220602162157-11.png||height="497" width="800"]]
349 349  
350 -13.  exit button
351 351  
352 352  
436 +(% style="color:blue" %)**4. Check to see if TTN received the message**
353 353  
354 -LA66 USB LoRaWAN Module not connected
438 +[[image:image-20220602162331-12.png||height="420" width="800"]]
355 355  
356 356  
357 -[[image:image-20220723110520-5.png||height="677" width="508"]]
358 358  
442 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
359 359  
360 360  
361 -Connect LA66 USB LoRaWAN Module
445 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
362 362  
363 363  
364 -[[image:image-20220723110626-6.png||height="681" width="511"]]
448 +(% style="color:red" %)**Preconditions:**
365 365  
450 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
366 366  
367 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
452 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
368 368  
369 369  
370 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
371 371  
456 +(% style="color:blue" %)**Steps for usage:**
372 372  
373 -[[image:image-20220723134549-8.png]]
458 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
374 374  
460 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
375 375  
462 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
376 376  
377 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
378 378  
379 379  
380 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
466 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
381 381  
382 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
383 383  
384 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
469 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
385 385  
386 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
387 387  
472 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
388 388  
389 -Example output in NodeRed is as below:
474 +[[image:image-20220602171233-2.png||height="538" width="800"]]
390 390  
391 -[[image:image-20220723144339-1.png]]
392 392  
393 393  
394 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
478 +(% style="color:blue" %)**2. Install Minicom in RPi.**
395 395  
480 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
396 396  
397 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
482 + (% style="background-color:yellow" %)**apt update**
398 398  
399 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
484 + (% style="background-color:yellow" %)**apt install minicom**
400 400  
401 -(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
402 402  
403 -[[image:image-20220723150132-2.png]]
487 +Use minicom to connect to the RPI's terminal
404 404  
405 -==== ** Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** ====
489 +[[image:image-20220602153146-3.png||height="439" width="500"]]
406 406  
407 -**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
408 408  
409 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
410 410  
411 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
493 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
412 412  
413 -**2.  Select the COM port corresponding to USB TTL**
495 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
414 414  
415 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
416 416  
417 -**3.  Select the bin file to burn**
498 +[[image:image-20220602154928-5.png||height="436" width="500"]]
418 418  
419 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
420 420  
421 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
422 422  
423 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
502 +(% style="color:blue" %)**4. Send Uplink message**
424 424  
425 -**4.  Click to start the download**
504 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
426 426  
427 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
506 +example: AT+SENDB=01,02,8,05820802581ea0a5
428 428  
429 -**5.  Check update process**
430 430  
431 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
509 +[[image:image-20220602160339-6.png||height="517" width="600"]]
432 432  
433 -**The following picture shows that the burning is successful**
434 434  
435 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
436 436  
437 -= 2.  FAQ =
513 +Check to see if TTN received the message
438 438  
439 -== 2.1  How to Compile Source Code for LA66? ==
515 +[[image:image-20220602160627-7.png||height="369" width="800"]]
440 440  
441 441  
442 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
443 443  
519 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
444 444  
445 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
446 446  
447 447  
448 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
523 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
449 449  
450 450  
451 -== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
452 452  
453 -Set the AT+COMMAND:
454 454  
455 -AT+UUID=666666666666
528 += 4.  Order Info =
456 456  
457 457  
458 -= 3.  Order Info =
531 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
459 459  
460 460  
461 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
462 -
463 -
464 464  (% style="color:blue" %)**XXX**(%%): The default frequency band
465 465  
466 466  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -473,37 +473,6 @@
473 473  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
474 474  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
475 475  
476 -= 4.  Reference =
546 += 5.  Reference =
477 477  
478 -
479 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
480 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
481 -
482 -= 5.  FCC Statement =
483 -
484 -
485 -(% style="color:red" %)**FCC Caution:**
486 -
487 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
488 -
489 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
490 -
491 -
492 -(% style="color:red" %)**IMPORTANT NOTE: **
493 -
494 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
495 -
496 -—Reorient or relocate the receiving antenna.
497 -
498 -—Increase the separation between the equipment and receiver.
499 -
500 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
501 -
502 -—Consult the dealer or an experienced radio/TV technician for help.
503 -
504 -
505 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
506 -
507 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
508 -
509 -
548 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content