Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 160.1
edited by Bei Jinggeng
on 2023/06/09 17:10
Change comment: There is no comment for this version
To version 128.1
edited by Herong Lu
on 2022/07/23 17:29
Change comment: Uploaded new attachment "image-20220723172938-9.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Lu
Content
... ... @@ -1,4 +1,4 @@
1 -
1 +0
2 2  
3 3  **Table of Contents:**
4 4  
... ... @@ -6,25 +6,34 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
15 15  
16 -[[image:image-20220715001142-3.png||height="145" width="220"]]
20 +(((
21 +
22 +)))
17 17  
18 -
19 19  (((
20 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
21 21  )))
27 +)))
22 22  
23 23  (((
30 +(((
24 24  (% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 25  )))
33 +)))
26 26  
27 27  (((
36 +(((
28 28  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
29 29  )))
30 30  
... ... @@ -31,35 +31,35 @@
31 31  (((
32 32  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
33 33  )))
43 +)))
34 34  
35 35  (((
46 +(((
36 36  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
37 37  )))
49 +)))
38 38  
39 39  
52 +
40 40  == 1.2  Features ==
41 41  
42 -
43 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 -* Ultra-long RF range
45 45  * Support LoRaWAN v1.0.4 protocol
46 46  * Support peer-to-peer protocol
47 47  * TCXO crystal to ensure RF performance on low temperature
48 -* Spring RF antenna
58 +* SMD Antenna pad and i-pex antenna connector
49 49  * Available in different frequency LoRaWAN frequency bands.
50 50  * World-wide unique OTAA keys.
51 51  * AT Command via UART-TTL interface
52 52  * Firmware upgradable via UART interface
53 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
63 +* Ultra-long RF range
54 54  
55 -
56 56  == 1.3  Specification ==
57 57  
58 -
59 59  * CPU: 32-bit 48 MHz
60 60  * Flash: 256KB
61 61  * RAM: 64KB
62 -* Input Power Range: 5v
70 +* Input Power Range: 1.8v ~~ 3.7v
71 +* Power Consumption: < 4uA.
63 63  * Frequency Range: 150 MHz ~~ 960 MHz
64 64  * Maximum Power +22 dBm constant RF output
65 65  * High sensitivity: -148 dBm
... ... @@ -71,436 +71,552 @@
71 71  ** Operating: 10 ~~ 95% (Non-Condensing)
72 72  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
73 73  * LoRa Rx current: <9 mA
83 +* I/O Voltage: 3.3v
74 74  
85 +== 1.4  AT Command ==
75 75  
76 -== 1.4  Pin Mapping & LED ==
77 77  
88 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
78 78  
79 -[[image:image-20220813183239-3.png||height="526" width="662"]]
80 80  
81 81  
82 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
92 +== 1.5  Dimension ==
83 83  
94 +[[image:image-20220718094750-3.png]]
84 84  
85 -(((
86 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
87 -)))
88 88  
89 89  
90 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
98 +== 1.6  Pin Mapping ==
91 91  
100 +[[image:image-20220720111850-1.png]]
92 92  
93 -[[image:image-20220723100027-1.png]]
94 94  
95 95  
96 -Open the serial port tool
104 +== 1.7  Land Pattern ==
97 97  
98 -[[image:image-20220602161617-8.png]]
106 +[[image:image-20220517072821-2.png]]
99 99  
100 100  
101 -[[image:image-20220602161718-9.png||height="457" width="800"]]
102 102  
110 += 2.  LA66 LoRaWAN Shield =
103 103  
104 104  
105 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
113 +== 2.1  Overview ==
106 106  
107 107  
108 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
116 +(((
117 +[[image:image-20220715000826-2.png||height="145" width="220"]]
118 +)))
109 109  
120 +(((
121 +
122 +)))
110 110  
111 -[[image:image-20220602161935-10.png||height="498" width="800"]]
124 +(((
125 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
126 +)))
112 112  
128 +(((
129 +(((
130 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
131 +)))
132 +)))
113 113  
134 +(((
135 +(((
136 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
137 +)))
138 +)))
114 114  
115 -(% style="color:blue" %)**3.  See Uplink Command**
140 +(((
141 +(((
142 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
143 +)))
144 +)))
116 116  
146 +(((
147 +(((
148 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
149 +)))
150 +)))
117 117  
118 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
119 119  
120 -example: AT+SENDB=01,02,8,05820802581ea0a5
121 121  
122 -[[image:image-20220602162157-11.png||height="497" width="800"]]
154 +== 2.2  Features ==
123 123  
156 +* Arduino Shield base on LA66 LoRaWAN module
157 +* Support LoRaWAN v1.0.4 protocol
158 +* Support peer-to-peer protocol
159 +* TCXO crystal to ensure RF performance on low temperature
160 +* SMA connector
161 +* Available in different frequency LoRaWAN frequency bands.
162 +* World-wide unique OTAA keys.
163 +* AT Command via UART-TTL interface
164 +* Firmware upgradable via UART interface
165 +* Ultra-long RF range
124 124  
167 +== 2.3  Specification ==
125 125  
126 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
169 +* CPU: 32-bit 48 MHz
170 +* Flash: 256KB
171 +* RAM: 64KB
172 +* Input Power Range: 1.8v ~~ 3.7v
173 +* Power Consumption: < 4uA.
174 +* Frequency Range: 150 MHz ~~ 960 MHz
175 +* Maximum Power +22 dBm constant RF output
176 +* High sensitivity: -148 dBm
177 +* Temperature:
178 +** Storage: -55 ~~ +125℃
179 +** Operating: -40 ~~ +85℃
180 +* Humidity:
181 +** Storage: 5 ~~ 95% (Non-Condensing)
182 +** Operating: 10 ~~ 95% (Non-Condensing)
183 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
184 +* LoRa Rx current: <9 mA
185 +* I/O Voltage: 3.3v
127 127  
187 +== 2.4  LED ==
128 128  
129 -[[image:image-20220817093644-1.png]]
189 +~1. The LED lights up red when there is an upstream data packet
190 +2. When the network is successfully connected, the green light will be on for 5 seconds
191 +3. Purple light on when receiving downlink data packets
130 130  
131 131  
132 -== 1.6  Example: How to join helium ==
194 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
133 133  
196 +Show connection diagram：
134 134  
198 +[[image:image-20220723170210-2.png||height="908" width="681"]]
135 135  
136 -(% style="color:blue" %)**1.  Create a new device.**
200 +1.open Arduino IDE
137 137  
202 +[[image:image-20220723170545-4.png]]
138 138  
139 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
204 +2.Open project
140 140  
206 +[[image:image-20220723170750-5.png]]
141 141  
208 +3.Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload
142 142  
143 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
210 +[[image:image-20220723171228-6.png]]
144 144  
212 +4.After the upload is successful, open the serial port monitoring and send the AT command
145 145  
146 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
147 147  
215 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
148 148  
149 149  
150 -(% style="color:blue" %)**3.  Use AT commands.**
151 151  
219 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
152 152  
153 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
154 154  
155 155  
223 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
156 156  
157 -(% style="color:blue" %)**4.  Use the serial port tool**
158 158  
226 +=== 2.8.1  Items needed for update ===
159 159  
160 -[[image:image-20220909151517-2.png||height="543" width="708"]]
228 +1. LA66 LoRaWAN Shield
229 +1. Arduino
230 +1. USB TO TTL Adapter
161 161  
232 +[[image:image-20220602100052-2.png||height="385" width="600"]]
162 162  
163 163  
164 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
235 +=== 2.8.2  Connection ===
165 165  
166 166  
167 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
238 +[[image:image-20220602101311-3.png||height="276" width="600"]]
168 168  
169 169  
241 +(((
242 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
243 +)))
170 170  
171 -(% style="color:blue" %)**6.  Network successfully.**
245 +(((
246 +(% style="background-color:yellow" %)**GND  <-> GND
247 +TXD  <->  TXD
248 +RXD  <->  RXD**
249 +)))
172 172  
173 173  
174 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
252 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
175 175  
254 +Connect USB TTL Adapter to PC after connecting the wires
176 176  
177 177  
178 -(% style="color:blue" %)**7.  Send uplink using command**
257 +[[image:image-20220602102240-4.png||height="304" width="600"]]
179 179  
180 180  
181 -[[image:image-20220912085244-1.png]]
260 +=== 2.8.3  Upgrade steps ===
182 182  
183 183  
184 -[[image:image-20220912085307-2.png]]
263 +==== 1.  Switch SW1 to put in ISP position ====
185 185  
186 186  
266 +[[image:image-20220602102824-5.png||height="306" width="600"]]
187 187  
188 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
189 189  
190 190  
191 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
270 +==== 2.  Press the RST switch once ====
192 192  
193 193  
194 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
273 +[[image:image-20220602104701-12.png||height="285" width="600"]]
195 195  
196 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
197 197  
198 198  
199 -(% style="color:red" %)**Preconditions:**
277 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
200 200  
201 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
202 202  
203 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
280 +(((
281 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
282 +)))
204 204  
205 205  
285 +[[image:image-20220602103227-6.png]]
206 206  
207 -(% style="color:blue" %)**Steps for usage:**
208 208  
209 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
288 +[[image:image-20220602103357-7.png]]
210 210  
211 -(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
212 212  
213 -(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
214 214  
292 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
293 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
215 215  
216 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
217 217  
296 +[[image:image-20220602103844-8.png]]
218 218  
219 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
220 220  
221 221  
222 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
300 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
301 +(% style="color:blue" %)**3. Select the bin file to burn**
223 223  
224 224  
225 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
304 +[[image:image-20220602104144-9.png]]
226 226  
227 227  
228 -[[image:image-20220723100439-2.png]]
307 +[[image:image-20220602104251-10.png]]
229 229  
230 230  
310 +[[image:image-20220602104402-11.png]]
231 231  
232 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
233 233  
234 234  
235 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
314 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
315 +(% style="color:blue" %)**4. Click to start the download**
236 236  
237 - (% style="background-color:yellow" %)**apt update**
317 +[[image:image-20220602104923-13.png]]
238 238  
239 - (% style="background-color:yellow" %)**apt install minicom**
240 240  
241 241  
242 -Use minicom to connect to the RPI's terminal
321 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
322 +(% style="color:blue" %)**5. Check update process**
243 243  
244 -[[image:image-20220602153146-3.png||height="439" width="500"]]
245 245  
325 +[[image:image-20220602104948-14.png]]
246 246  
247 247  
248 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
249 249  
329 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
330 +(% style="color:blue" %)**The following picture shows that the burning is successful**
250 250  
251 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
332 +[[image:image-20220602105251-15.png]]
252 252  
253 253  
254 -[[image:image-20220602154928-5.png||height="436" width="500"]]
255 255  
336 += 3.  LA66 USB LoRaWAN Adapter =
256 256  
257 257  
258 -(% style="color:blue" %)**4.  Send Uplink message**
339 +== 3.1  Overview ==
259 259  
260 260  
261 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
342 +[[image:image-20220715001142-3.png||height="145" width="220"]]
262 262  
263 -example: AT+SENDB=01,02,8,05820802581ea0a5
264 264  
345 +(((
346 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
347 +)))
265 265  
266 -[[image:image-20220602160339-6.png||height="517" width="600"]]
349 +(((
350 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
351 +)))
267 267  
353 +(((
354 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
355 +)))
268 268  
357 +(((
358 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
359 +)))
269 269  
270 -Check to see if TTN received the message
361 +(((
362 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
363 +)))
271 271  
272 272  
273 -[[image:image-20220602160627-7.png||height="369" width="800"]]
274 274  
367 +== 3.2  Features ==
275 275  
276 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
369 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
370 +* Ultra-long RF range
371 +* Support LoRaWAN v1.0.4 protocol
372 +* Support peer-to-peer protocol
373 +* TCXO crystal to ensure RF performance on low temperature
374 +* Spring RF antenna
375 +* Available in different frequency LoRaWAN frequency bands.
376 +* World-wide unique OTAA keys.
377 +* AT Command via UART-TTL interface
378 +* Firmware upgradable via UART interface
379 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
277 277  
278 -=== 1.9.1  Hardware and Software Connection ===
381 +== 3.3  Specification ==
279 279  
383 +* CPU: 32-bit 48 MHz
384 +* Flash: 256KB
385 +* RAM: 64KB
386 +* Input Power Range: 5v
387 +* Frequency Range: 150 MHz ~~ 960 MHz
388 +* Maximum Power +22 dBm constant RF output
389 +* High sensitivity: -148 dBm
390 +* Temperature:
391 +** Storage: -55 ~~ +125℃
392 +** Operating: -40 ~~ +85℃
393 +* Humidity:
394 +** Storage: 5 ~~ 95% (Non-Condensing)
395 +** Operating: 10 ~~ 95% (Non-Condensing)
396 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
397 +* LoRa Rx current: <9 mA
280 280  
399 +== 3.4  Pin Mapping & LED ==
281 281  
282 -==== (% style="color:blue" %)**Overview：**(%%) ====
283 283  
284 284  
285 -(((
286 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
403 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
287 287  
288 -* Send real-time location information of mobile phone to LoRaWAN network.
289 -* Check LoRaWAN network signal strengh.
290 -* Manually send messages to LoRaWAN network.
405 +
406 +(((
407 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
291 291  )))
292 292  
293 293  
411 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
294 294  
295 295  
296 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
414 +[[image:image-20220723100027-1.png]]
297 297  
298 298  
299 -A USB to Type-C adapter is needed to connect to a Mobile phone.
417 +Open the serial port tool
300 300  
301 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
419 +[[image:image-20220602161617-8.png]]
302 302  
303 -[[image:image-20220813174353-2.png||height="360" width="313"]]
421 +[[image:image-20220602161718-9.png||height="457" width="800"]]
304 304  
305 305  
306 306  
307 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
425 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
308 308  
427 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
309 309  
310 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
311 311  
430 +[[image:image-20220602161935-10.png||height="498" width="800"]]
312 312  
313 -[[image:image-20220813173738-1.png]]
314 314  
315 315  
434 +(% style="color:blue" %)**3. See Uplink Command**
316 316  
317 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
436 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
318 318  
438 +example: AT+SENDB=01,02,8,05820802581ea0a5
319 319  
320 -Function and page introduction
440 +[[image:image-20220602162157-11.png||height="497" width="800"]]
321 321  
322 322  
323 -[[image:image-20220723113448-7.png||height="995" width="450"]]
324 324  
444 +(% style="color:blue" %)**4. Check to see if TTN received the message**
325 325  
326 -**Block Explain:**
446 +[[image:image-20220602162331-12.png||height="420" width="800"]]
327 327  
328 -1.  Display LA66 USB LoRaWAN Module connection status
329 329  
330 -2.  Check and reconnect
331 331  
332 -3.  Turn send timestamps on or off
450 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
333 333  
334 -4.  Display LoRaWan connection status
335 335  
336 -5.  Check LoRaWan connection status
453 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
337 337  
338 -6.  The RSSI value of the node when the ACK is received
455 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
339 339  
340 -7.  Node's Signal Strength Icon
457 +(% style="color:red" %)**Preconditions:**
341 341  
342 -8.  Configure Location Uplink Interval
459 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
343 343  
344 -9.  AT command input box
461 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
345 345  
346 -10.  Send Button:  Send input box info to LA66 USB Adapter
347 347  
348 -11.  Output Log from LA66 USB adapter
349 349  
350 -12.  clear log button
465 +(% style="color:blue" %)**Steps for usage:**
351 351  
352 -13.  exit button
467 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
353 353  
469 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
354 354  
471 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
355 355  
356 -LA66 USB LoRaWAN Module not connected
357 357  
358 358  
359 -[[image:image-20220723110520-5.png||height="677" width="508"]]
475 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
360 360  
361 361  
478 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
362 362  
363 -Connect LA66 USB LoRaWAN Module
364 364  
481 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
365 365  
366 -[[image:image-20220723110626-6.png||height="681" width="511"]]
483 +[[image:image-20220723100439-2.png]]
367 367  
368 368  
369 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
370 370  
487 +(% style="color:blue" %)**2. Install Minicom in RPi.**
371 371  
372 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
489 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
373 373  
491 + (% style="background-color:yellow" %)**apt update**
374 374  
375 -[[image:image-20220723134549-8.png]]
493 + (% style="background-color:yellow" %)**apt install minicom**
376 376  
377 377  
496 +Use minicom to connect to the RPI's terminal
378 378  
379 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
498 +[[image:image-20220602153146-3.png||height="439" width="500"]]
380 380  
381 381  
382 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
383 383  
384 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
502 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
385 385  
386 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
504 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
387 387  
388 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
389 389  
507 +[[image:image-20220602154928-5.png||height="436" width="500"]]
390 390  
391 -Example output in NodeRed is as below:
392 392  
393 -[[image:image-20220723144339-1.png]]
394 394  
511 +(% style="color:blue" %)**4. Send Uplink message**
395 395  
396 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
513 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
397 397  
515 +example: AT+SENDB=01,02,8,05820802581ea0a5
398 398  
399 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
400 400  
401 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
518 +[[image:image-20220602160339-6.png||height="517" width="600"]]
402 402  
403 -(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
404 404  
405 -[[image:image-20220723150132-2.png]]
406 406  
407 -==== ** Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** ====
522 +Check to see if TTN received the message
408 408  
409 -**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
524 +[[image:image-20220602160627-7.png||height="369" width="800"]]
410 410  
411 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
412 412  
413 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
414 414  
415 -**2.  Select the COM port corresponding to USB TTL**
528 +== 3.8  Example: Use of LA66 USB LoRaWAN Module and DRAGINO-LA66-APP. ==
416 416  
417 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
530 +=== 3.8.1 DRAGINO-LA66-APP ===
418 418  
419 -**3.  Select the bin file to burn**
532 +[[image:image-20220723102027-3.png]]
420 420  
421 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
534 +==== Overview： ====
422 422  
423 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
536 +DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Module. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Module.
424 424  
425 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
538 +View the communication signal strength between the node and the gateway through the RSSI value（DRAGINO-LA66-APP currently only supports Android system）
426 426  
427 -**4.  Click to start the download**
540 +==== Conditions of Use： ====
428 428  
429 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
542 +Requires a type-c to USB adapter
430 430  
431 -**5.  Check update process**
544 +[[image:image-20220723104754-4.png]]
432 432  
433 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
546 +==== Use of APP: ====
434 434  
435 -**The following picture shows that the burning is successful**
548 +Function and page introduction
436 436  
437 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
550 +[[image:image-20220723113448-7.png||height="1481" width="670"]]
438 438  
439 -= 2.  FAQ =
552 +1.Display LA66 USB LoRaWAN Module connection status
440 440  
441 -== 2.1  How to Compile Source Code for LA66? ==
554 +2.Check and reconnect
442 442  
556 +3.Turn send timestamps on or off
443 443  
444 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
558 +4.Display LoRaWan connection status
445 445  
560 +5.Check LoRaWan connection status
446 446  
447 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
562 +6.The RSSI value of the node when the ACK is received
448 448  
564 +7.Node's Signal Strength Icon
449 449  
450 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
566 +8.Set the packet sending interval of the node in seconds
451 451  
568 +9.AT command input box
452 452  
453 -= 3.  Order Info =
570 +10.Send AT command button
454 454  
572 +11.Node log box
455 455  
456 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
574 +12.clear log button
457 457  
576 +13.exit button
458 458  
459 -(% style="color:blue" %)**XXX**(%%): The default frequency band
578 +LA66 USB LoRaWAN Module not connected
460 460  
461 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
462 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
463 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
464 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
465 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
466 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
467 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
468 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
469 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
580 +[[image:image-20220723110520-5.png||height="903" width="677"]]
470 470  
582 +Connect LA66 USB LoRaWAN Module
471 471  
472 -= 4.  Reference =
584 +[[image:image-20220723110626-6.png||height="906" width="680"]]
473 473  
586 +=== 3.8.2 Use DRAGINO-LA66-APP to obtain positioning information and send it to TTNV3 through LA66 USB LoRaWAN Module and integrate it into Node-RED ===
474 474  
475 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
476 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
588 +1.Register LA66 USB LoRaWAN Module to TTNV3
477 477  
590 +[[image:image-20220723134549-8.png]]
478 478  
479 -= 5.  FCC Statement =
592 +2.Open Node-RED,And import the JSON file to generate the flow
480 480  
594 +Sample JSON file please go to this link to download：放置JSON文件的链接
481 481  
482 -(% style="color:red" %)**FCC Caution:**
596 +For the usage of Node-RED, please refer to: [[http:~~/~~/8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/>>http://8.211.40.43:8080/xwiki/bin/view/Main/Node-RED/]]
483 483  
484 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
598 +The following is the positioning effect map
485 485  
486 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
600 +[[image:image-20220723144339-1.png]]
487 487  
602 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
488 488  
489 -(% style="color:red" %)**IMPORTANT NOTE: **
604 +The LA66 USB LoRaWAN Module is the same as the LA66 LoRaWAN Shield update method
490 490  
491 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
606 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
492 492  
493 -—Reorient or relocate the receiving antenna.
608 +[[image:image-20220723150132-2.png]]
494 494  
495 -—Increase the separation between the equipment and receiver.
496 496  
497 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
611 += 4.  Order Info =
498 498  
499 -—Consult the dealer or an experienced radio/TV technician for help.
500 500  
614 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
501 501  
502 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
503 503  
504 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
617 +(% style="color:blue" %)**XXX**(%%): The default frequency band
505 505  
506 -
619 +* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
620 +* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
621 +* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
622 +* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
623 +* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
624 +* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
625 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
626 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
627 +* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
628 +
629 += 5.  Reference =
630 +
631 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content