Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 158.3
edited by Xiaoling
on 2022/12/13 17:34
Change comment: There is no comment for this version
To version 106.1
edited by Herong Lu
on 2022/07/23 10:49
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Lu
Content
... ... @@ -6,25 +6,34 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
15 15  
16 -[[image:image-20220715001142-3.png||height="145" width="220"]]
20 +(((
21 +
22 +)))
17 17  
18 -
19 19  (((
20 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
21 21  )))
27 +)))
22 22  
23 23  (((
30 +(((
24 24  (% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 25  )))
33 +)))
26 26  
27 27  (((
36 +(((
28 28  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
29 29  )))
30 30  
... ... @@ -31,36 +31,36 @@
31 31  (((
32 32  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
33 33  )))
43 +)))
34 34  
35 35  (((
46 +(((
36 36  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
37 37  )))
49 +)))
38 38  
39 39  
52 +
40 40  == 1.2  Features ==
41 41  
42 -
43 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 -* Ultra-long RF range
45 45  * Support LoRaWAN v1.0.4 protocol
46 46  * Support peer-to-peer protocol
47 47  * TCXO crystal to ensure RF performance on low temperature
48 -* Spring RF antenna
58 +* SMD Antenna pad and i-pex antenna connector
49 49  * Available in different frequency LoRaWAN frequency bands.
50 50  * World-wide unique OTAA keys.
51 51  * AT Command via UART-TTL interface
52 52  * Firmware upgradable via UART interface
53 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
63 +* Ultra-long RF range
54 54  
55 55  
56 -
57 57  == 1.3  Specification ==
58 58  
59 -
60 60  * CPU: 32-bit 48 MHz
61 61  * Flash: 256KB
62 62  * RAM: 64KB
63 -* Input Power Range: 5v
71 +* Input Power Range: 1.8v ~~ 3.7v
72 +* Power Consumption: < 4uA.
64 64  * Frequency Range: 150 MHz ~~ 960 MHz
65 65  * Maximum Power +22 dBm constant RF output
66 66  * High sensitivity: -148 dBm
... ... @@ -72,360 +72,469 @@
72 72  ** Operating: 10 ~~ 95% (Non-Condensing)
73 73  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
74 74  * LoRa Rx current: <9 mA
84 +* I/O Voltage: 3.3v
75 75  
76 76  
87 +== 1.4  AT Command ==
77 77  
78 -== 1.4  Pin Mapping & LED ==
79 79  
90 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
80 80  
81 -[[image:image-20220813183239-3.png||height="526" width="662"]]
82 82  
83 83  
84 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
94 +== 1.5  Dimension ==
85 85  
96 +[[image:image-20220718094750-3.png]]
86 86  
87 -(((
88 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
89 -)))
90 90  
91 91  
92 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
100 +== 1.6  Pin Mapping ==
93 93  
102 +[[image:image-20220720111850-1.png]]
94 94  
95 -[[image:image-20220723100027-1.png]]
96 96  
97 97  
98 -Open the serial port tool
106 +== 1.7  Land Pattern ==
99 99  
100 -[[image:image-20220602161617-8.png]]
108 +[[image:image-20220517072821-2.png]]
101 101  
102 102  
103 -[[image:image-20220602161718-9.png||height="457" width="800"]]
104 104  
112 += 2.  LA66 LoRaWAN Shield =
105 105  
106 106  
107 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
115 +== 2.1  Overview ==
108 108  
109 109  
110 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
118 +(((
119 +[[image:image-20220715000826-2.png||height="145" width="220"]]
120 +)))
111 111  
122 +(((
123 +
124 +)))
112 112  
113 -[[image:image-20220602161935-10.png||height="498" width="800"]]
126 +(((
127 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
128 +)))
114 114  
130 +(((
131 +(((
132 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
133 +)))
134 +)))
115 115  
136 +(((
137 +(((
138 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
139 +)))
140 +)))
116 116  
117 -(% style="color:blue" %)**3.  See Uplink Command**
142 +(((
143 +(((
144 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
145 +)))
146 +)))
118 118  
148 +(((
149 +(((
150 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
151 +)))
152 +)))
119 119  
120 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
121 121  
122 -example: AT+SENDB=01,02,8,05820802581ea0a5
123 123  
124 -[[image:image-20220602162157-11.png||height="497" width="800"]]
156 +== 2.2  Features ==
125 125  
158 +* Arduino Shield base on LA66 LoRaWAN module
159 +* Support LoRaWAN v1.0.4 protocol
160 +* Support peer-to-peer protocol
161 +* TCXO crystal to ensure RF performance on low temperature
162 +* SMA connector
163 +* Available in different frequency LoRaWAN frequency bands.
164 +* World-wide unique OTAA keys.
165 +* AT Command via UART-TTL interface
166 +* Firmware upgradable via UART interface
167 +* Ultra-long RF range
126 126  
127 127  
128 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
170 +== 2.3  Specification ==
129 129  
172 +* CPU: 32-bit 48 MHz
173 +* Flash: 256KB
174 +* RAM: 64KB
175 +* Input Power Range: 1.8v ~~ 3.7v
176 +* Power Consumption: < 4uA.
177 +* Frequency Range: 150 MHz ~~ 960 MHz
178 +* Maximum Power +22 dBm constant RF output
179 +* High sensitivity: -148 dBm
180 +* Temperature:
181 +** Storage: -55 ~~ +125℃
182 +** Operating: -40 ~~ +85℃
183 +* Humidity:
184 +** Storage: 5 ~~ 95% (Non-Condensing)
185 +** Operating: 10 ~~ 95% (Non-Condensing)
186 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
187 +* LoRa Rx current: <9 mA
188 +* I/O Voltage: 3.3v
130 130  
131 -[[image:image-20220817093644-1.png]]
132 132  
191 +== 2.4  Pin Mapping & LED ==
133 133  
134 -== 1.6  Example: How to join helium ==
135 135  
136 136  
195 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
137 137  
138 -(% style="color:blue" %)**1.  Create a new device.**
139 139  
140 140  
141 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
199 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
142 142  
143 143  
144 144  
145 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
203 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
146 146  
147 147  
148 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
149 149  
207 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
150 150  
151 151  
152 -(% style="color:blue" %)**3.  Use AT commands.**
210 +=== 2.8.1  Items needed for update ===
153 153  
212 +1. LA66 LoRaWAN Shield
213 +1. Arduino
214 +1. USB TO TTL Adapter
154 154  
155 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
216 +[[image:image-20220602100052-2.png||height="385" width="600"]]
156 156  
157 157  
219 +=== 2.8.2  Connection ===
158 158  
159 -(% style="color:blue" %)**4.  Use the serial port tool**
160 160  
222 +[[image:image-20220602101311-3.png||height="276" width="600"]]
161 161  
162 -[[image:image-20220909151517-2.png||height="543" width="708"]]
163 163  
225 +(((
226 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
227 +)))
164 164  
229 +(((
230 +(% style="background-color:yellow" %)**GND  <-> GND
231 +TXD  <->  TXD
232 +RXD  <->  RXD**
233 +)))
165 165  
166 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
167 167  
236 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
168 168  
169 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
238 +Connect USB TTL Adapter to PC after connecting the wires
170 170  
171 171  
241 +[[image:image-20220602102240-4.png||height="304" width="600"]]
172 172  
173 -(% style="color:blue" %)**6.  Network successfully.**
174 174  
244 +=== 2.8.3  Upgrade steps ===
175 175  
176 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
177 177  
247 +==== 1.  Switch SW1 to put in ISP position ====
178 178  
179 179  
180 -(% style="color:blue" %)**7.  Send uplink using command**
250 +[[image:image-20220602102824-5.png||height="306" width="600"]]
181 181  
182 182  
183 -[[image:image-20220912085244-1.png]]
184 184  
254 +==== 2.  Press the RST switch once ====
185 185  
186 -[[image:image-20220912085307-2.png]]
187 187  
257 +[[image:image-20220602104701-12.png||height="285" width="600"]]
188 188  
189 189  
190 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
191 191  
261 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
192 192  
193 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
194 194  
264 +(((
265 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
266 +)))
195 195  
196 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
197 197  
198 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
269 +[[image:image-20220602103227-6.png]]
199 199  
200 200  
201 -(% style="color:red" %)**Preconditions:**
272 +[[image:image-20220602103357-7.png]]
202 202  
203 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
204 204  
205 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
206 206  
276 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
277 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
207 207  
208 208  
209 -(% style="color:blue" %)**Steps for usage:**
280 +[[image:image-20220602103844-8.png]]
210 210  
211 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
212 212  
213 -(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
214 214  
215 -(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
284 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
285 +(% style="color:blue" %)**3. Select the bin file to burn**
216 216  
217 217  
218 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
288 +[[image:image-20220602104144-9.png]]
219 219  
220 220  
221 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
291 +[[image:image-20220602104251-10.png]]
222 222  
223 223  
224 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
294 +[[image:image-20220602104402-11.png]]
225 225  
226 226  
227 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
228 228  
298 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
299 +(% style="color:blue" %)**4. Click to start the download**
229 229  
230 -[[image:image-20220723100439-2.png]]
301 +[[image:image-20220602104923-13.png]]
231 231  
232 232  
233 233  
234 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
305 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
306 +(% style="color:blue" %)**5. Check update process**
235 235  
236 236  
237 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
309 +[[image:image-20220602104948-14.png]]
238 238  
239 - (% style="background-color:yellow" %)**apt update**
240 240  
241 - (% style="background-color:yellow" %)**apt install minicom**
242 242  
313 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
314 +(% style="color:blue" %)**The following picture shows that the burning is successful**
243 243  
244 -Use minicom to connect to the RPI's terminal
316 +[[image:image-20220602105251-15.png]]
245 245  
246 -[[image:image-20220602153146-3.png||height="439" width="500"]]
247 247  
248 248  
320 += 3.  LA66 USB LoRaWAN Adapter =
249 249  
250 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
251 251  
323 +== 3.1  Overview ==
252 252  
253 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
254 254  
326 +[[image:image-20220715001142-3.png||height="145" width="220"]]
255 255  
256 -[[image:image-20220602154928-5.png||height="436" width="500"]]
257 257  
329 +(((
330 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
331 +)))
258 258  
333 +(((
334 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
335 +)))
259 259  
260 -(% style="color:blue" %)**4.  Send Uplink message**
337 +(((
338 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
339 +)))
261 261  
341 +(((
342 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
343 +)))
262 262  
263 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
345 +(((
346 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
347 +)))
264 264  
265 -example: AT+SENDB=01,02,8,05820802581ea0a5
266 266  
267 267  
268 -[[image:image-20220602160339-6.png||height="517" width="600"]]
351 +== 3.2  Features ==
269 269  
353 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
354 +* Ultra-long RF range
355 +* Support LoRaWAN v1.0.4 protocol
356 +* Support peer-to-peer protocol
357 +* TCXO crystal to ensure RF performance on low temperature
358 +* Spring RF antenna
359 +* Available in different frequency LoRaWAN frequency bands.
360 +* World-wide unique OTAA keys.
361 +* AT Command via UART-TTL interface
362 +* Firmware upgradable via UART interface
363 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
270 270  
271 271  
272 -Check to see if TTN received the message
366 +== 3.3  Specification ==
273 273  
368 +* CPU: 32-bit 48 MHz
369 +* Flash: 256KB
370 +* RAM: 64KB
371 +* Input Power Range: 5v
372 +* Frequency Range: 150 MHz ~~ 960 MHz
373 +* Maximum Power +22 dBm constant RF output
374 +* High sensitivity: -148 dBm
375 +* Temperature:
376 +** Storage: -55 ~~ +125℃
377 +** Operating: -40 ~~ +85℃
378 +* Humidity:
379 +** Storage: 5 ~~ 95% (Non-Condensing)
380 +** Operating: 10 ~~ 95% (Non-Condensing)
381 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
382 +* LoRa Rx current: <9 mA
274 274  
275 -[[image:image-20220602160627-7.png||height="369" width="800"]]
276 276  
385 +== 3.4  Pin Mapping & LED ==
277 277  
278 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
279 279  
280 -=== 1.9.1  Hardware and Software Connection ===
281 281  
389 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
282 282  
283 283  
284 -==== (% style="color:blue" %)**Overview：**(%%) ====
392 +(((
393 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
394 +)))
285 285  
286 286  
287 -(((
288 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
397 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
289 289  
290 -* Send real-time location information of mobile phone to LoRaWAN network.
291 -* Check LoRaWAN network signal strengh.
292 -* Manually send messages to LoRaWAN network.
293 -)))
294 294  
400 +[[image:image-20220723100027-1.png]]
295 295  
296 296  
403 +Open the serial port tool
297 297  
298 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
405 +[[image:image-20220602161617-8.png]]
299 299  
407 +[[image:image-20220602161718-9.png||height="457" width="800"]]
300 300  
301 -A USB to Type-C adapter is needed to connect to a Mobile phone.
302 302  
303 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
304 304  
305 -[[image:image-20220813174353-2.png||height="360" width="313"]]
411 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
306 306  
413 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
307 307  
308 308  
309 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
416 +[[image:image-20220602161935-10.png||height="498" width="800"]]
310 310  
311 311  
312 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
313 313  
420 +(% style="color:blue" %)**3. See Uplink Command**
314 314  
315 -[[image:image-20220813173738-1.png]]
422 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
316 316  
424 +example: AT+SENDB=01,02,8,05820802581ea0a5
317 317  
426 +[[image:image-20220602162157-11.png||height="497" width="800"]]
318 318  
319 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
320 320  
321 321  
322 -Function and page introduction
430 +(% style="color:blue" %)**4. Check to see if TTN received the message**
323 323  
432 +[[image:image-20220602162331-12.png||height="420" width="800"]]
324 324  
325 -[[image:image-20220723113448-7.png||height="995" width="450"]]
326 326  
327 327  
328 -**Block Explain:**
436 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
329 329  
330 -1.  Display LA66 USB LoRaWAN Module connection status
331 331  
332 -2.  Check and reconnect
439 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
333 333  
334 -3.  Turn send timestamps on or off
441 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
335 335  
336 -4.  Display LoRaWan connection status
443 +(% style="color:red" %)**Preconditions:**
337 337  
338 -5.  Check LoRaWan connection status
445 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
339 339  
340 -6.  The RSSI value of the node when the ACK is received
447 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
341 341  
342 -7.  Node's Signal Strength Icon
343 343  
344 -8.  Configure Location Uplink Interval
345 345  
346 -9.  AT command input box
451 +(% style="color:blue" %)**Steps for usage:**
347 347  
348 -10.  Send Button:  Send input box info to LA66 USB Adapter
453 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
349 349  
350 -11.  Output Log from LA66 USB adapter
455 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
351 351  
352 -12.  clear log button
457 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
353 353  
354 -13.  exit button
355 355  
356 356  
461 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
357 357  
358 -LA66 USB LoRaWAN Module not connected
359 359  
464 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
360 360  
361 -[[image:image-20220723110520-5.png||height="677" width="508"]]
362 362  
467 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
363 363  
469 +[[image:image-20220723100439-2.png]]
364 364  
365 -Connect LA66 USB LoRaWAN Module
366 366  
367 367  
368 -[[image:image-20220723110626-6.png||height="681" width="511"]]
473 +(% style="color:blue" %)**2. Install Minicom in RPi.**
369 369  
475 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
370 370  
371 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
477 + (% style="background-color:yellow" %)**apt update**
372 372  
479 + (% style="background-color:yellow" %)**apt install minicom**
373 373  
374 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
375 375  
482 +Use minicom to connect to the RPI's terminal
376 376  
377 -[[image:image-20220723134549-8.png]]
484 +[[image:image-20220602153146-3.png||height="439" width="500"]]
378 378  
379 379  
380 380  
381 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
488 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
382 382  
490 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
383 383  
384 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
385 385  
386 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
493 +[[image:image-20220602154928-5.png||height="436" width="500"]]
387 387  
388 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
389 389  
390 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
391 391  
497 +(% style="color:blue" %)**4. Send Uplink message**
392 392  
393 -Example output in NodeRed is as below:
499 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
394 394  
395 -[[image:image-20220723144339-1.png]]
501 +example: AT+SENDB=01,02,8,05820802581ea0a5
396 396  
397 397  
398 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
504 +[[image:image-20220602160339-6.png||height="517" width="600"]]
399 399  
400 400  
401 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
402 402  
403 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
508 +Check to see if TTN received the message
404 404  
510 +[[image:image-20220602160627-7.png||height="369" width="800"]]
405 405  
406 -[[image:image-20220723150132-2.png]]
407 407  
408 408  
409 -= 2.  FAQ =
514 +== 3.8  Example: Use of LA66 USB LoRaWAN Module and DRAGINO-LA66-APP. ==
410 410  
411 -== 2.1  How to Compile Source Code for LA66? ==
516 +=== 3.8.1 DRAGINO-LA66-APP ===
412 412  
518 +[[image:image-20220723102027-3.png]]
413 413  
414 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
520 +==== Overview： ====
415 415  
522 +DRAGINO-LA66-APP is a mobile APP for LA66 USB LoRaWAN Module. DRAGINO-LA66-APP can obtain the positioning information of the mobile phone and send it to the LoRaWAN platform through the LA66 USB LoRaWAN Module.（DRAGINO-LA66-APP currently only supports Android system）
416 416  
417 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
524 +==== Conditions of Use： ====
418 418  
526 +Requires a type-c to USB adapter
419 419  
420 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
528 +[[image:image-20220723104754-4.png]]
421 421  
530 +==== Use of APP: ====
422 422  
423 -= 3.  Order Info =
532 +LA66 USB LoRaWAN Module not connected
424 424  
425 425  
426 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
427 427  
536 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
428 428  
538 +
539 +
540 +
541 += 4.  Order Info =
542 +
543 +
544 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
545 +
546 +
429 429  (% style="color:blue" %)**XXX**(%%): The default frequency band
430 430  
431 431  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -438,41 +438,6 @@
438 438  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
439 439  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
440 440  
559 += 5.  Reference =
441 441  
442 -
443 -= 4.  Reference =
444 -
445 -
446 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
447 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
448 -
449 -
450 -
451 -= 5.  FCC Statement =
452 -
453 -
454 -(% style="color:red" %)**FCC Caution:**
455 -
456 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
457 -
458 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
459 -
460 -
461 -(% style="color:red" %)**IMPORTANT NOTE: **
462 -
463 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
464 -
465 -—Reorient or relocate the receiving antenna.
466 -
467 -—Increase the separation between the equipment and receiver.
468 -
469 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
470 -
471 -—Consult the dealer or an experienced radio/TV technician for help.
472 -
473 -
474 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
475 -
476 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
477 -
478 -
561 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content