Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 158.2
edited by Xiaoling
on 2022/12/13 17:33
Change comment: There is no comment for this version
To version 100.6
edited by Xiaoling
on 2022/07/19 11:49
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -6,25 +6,34 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 -== 1.1  Overview ==
14 14  
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
15 15  
16 -[[image:image-20220715001142-3.png||height="145" width="220"]]
20 +(((
21 +
22 +)))
17 17  
18 -
19 19  (((
20 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
21 21  )))
27 +)))
22 22  
23 23  (((
24 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
30 +(((
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 25  )))
33 +)))
26 26  
27 27  (((
36 +(((
28 28  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
29 29  )))
30 30  
... ... @@ -31,36 +31,37 @@
31 31  (((
32 32  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
33 33  )))
43 +)))
34 34  
35 35  (((
46 +(((
36 36  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
37 37  )))
49 +)))
38 38  
39 39  
52 +
40 40  == 1.2  Features ==
41 41  
42 -
43 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 -* Ultra-long RF range
45 45  * Support LoRaWAN v1.0.4 protocol
46 46  * Support peer-to-peer protocol
47 47  * TCXO crystal to ensure RF performance on low temperature
48 -* Spring RF antenna
58 +* SMD Antenna pad and i-pex antenna connector
49 49  * Available in different frequency LoRaWAN frequency bands.
50 50  * World-wide unique OTAA keys.
51 51  * AT Command via UART-TTL interface
52 52  * Firmware upgradable via UART interface
53 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
63 +* Ultra-long RF range
54 54  
55 55  
56 56  
57 57  == 1.3  Specification ==
58 58  
59 -
60 60  * CPU: 32-bit 48 MHz
61 61  * Flash: 256KB
62 62  * RAM: 64KB
63 -* Input Power Range: 5v
72 +* Input Power Range: 1.8v ~~ 3.7v
73 +* Power Consumption: < 4uA.
64 64  * Frequency Range: 150 MHz ~~ 960 MHz
65 65  * Maximum Power +22 dBm constant RF output
66 66  * High sensitivity: -148 dBm
... ... @@ -72,362 +72,456 @@
72 72  ** Operating: 10 ~~ 95% (Non-Condensing)
73 73  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
74 74  * LoRa Rx current: <9 mA
85 +* I/O Voltage: 3.3v
75 75  
76 76  
77 77  
78 -== 1.4  Pin Mapping & LED ==
89 +== 1.4  AT Command ==
79 79  
80 80  
81 -[[image:image-20220813183239-3.png||height="526" width="662"]]
92 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
82 82  
83 83  
84 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
85 85  
96 +== 1.5  Dimension ==
86 86  
87 -(((
88 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
89 -)))
98 +[[image:image-20220718094750-3.png]]
90 90  
91 91  
92 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
93 93  
102 +== 1.6  Pin Mapping ==
94 94  
95 -[[image:image-20220723100027-1.png]]
96 96  
105 +[[image:image-20220719093156-1.png]]
97 97  
98 -Open the serial port tool
99 99  
100 -[[image:image-20220602161617-8.png]]
101 101  
109 +== 1.7  Land Pattern ==
102 102  
103 -[[image:image-20220602161718-9.png||height="457" width="800"]]
111 +[[image:image-20220517072821-2.png]]
104 104  
105 105  
106 106  
107 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
115 += 2.  LA66 LoRaWAN Shield =
108 108  
109 109  
110 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
118 +== 2.1  Overview ==
111 111  
112 112  
113 -[[image:image-20220602161935-10.png||height="498" width="800"]]
121 +(((
122 +[[image:image-20220715000826-2.png||height="145" width="220"]]
123 +)))
114 114  
125 +(((
126 +
127 +)))
115 115  
129 +(((
130 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
131 +)))
116 116  
117 -(% style="color:blue" %)**3.  See Uplink Command**
133 +(((
134 +(((
135 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
136 +)))
137 +)))
118 118  
139 +(((
140 +(((
141 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
142 +)))
143 +)))
119 119  
120 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
145 +(((
146 +(((
147 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
148 +)))
149 +)))
121 121  
122 -example: AT+SENDB=01,02,8,05820802581ea0a5
151 +(((
152 +(((
153 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
154 +)))
155 +)))
123 123  
124 -[[image:image-20220602162157-11.png||height="497" width="800"]]
125 125  
126 126  
159 +== 2.2  Features ==
127 127  
128 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
161 +* Arduino Shield base on LA66 LoRaWAN module
162 +* Support LoRaWAN v1.0.4 protocol
163 +* Support peer-to-peer protocol
164 +* TCXO crystal to ensure RF performance on low temperature
165 +* SMA connector
166 +* Available in different frequency LoRaWAN frequency bands.
167 +* World-wide unique OTAA keys.
168 +* AT Command via UART-TTL interface
169 +* Firmware upgradable via UART interface
170 +* Ultra-long RF range
129 129  
130 130  
131 -[[image:image-20220817093644-1.png]]
132 132  
174 +== 2.3  Specification ==
133 133  
134 -== 1.6  Example: How to join helium ==
176 +* CPU: 32-bit 48 MHz
177 +* Flash: 256KB
178 +* RAM: 64KB
179 +* Input Power Range: 1.8v ~~ 3.7v
180 +* Power Consumption: < 4uA.
181 +* Frequency Range: 150 MHz ~~ 960 MHz
182 +* Maximum Power +22 dBm constant RF output
183 +* High sensitivity: -148 dBm
184 +* Temperature:
185 +** Storage: -55 ~~ +125℃
186 +** Operating: -40 ~~ +85℃
187 +* Humidity:
188 +** Storage: 5 ~~ 95% (Non-Condensing)
189 +** Operating: 10 ~~ 95% (Non-Condensing)
190 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
191 +* LoRa Rx current: <9 mA
192 +* I/O Voltage: 3.3v
135 135  
136 136  
137 137  
138 -(% style="color:blue" %)**1.  Create a new device.**
196 +== 2.4  Pin Mapping & LED ==
139 139  
140 140  
141 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
142 142  
200 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
143 143  
144 144  
145 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
146 146  
204 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
147 147  
148 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
149 149  
150 150  
208 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
151 151  
152 -(% style="color:blue" %)**3.  Use AT commands.**
153 153  
154 154  
155 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
212 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
156 156  
157 157  
215 +=== 2.8.1  Items needed for update ===
158 158  
159 -(% style="color:blue" %)**4.  Use the serial port tool**
217 +1. LA66 LoRaWAN Shield
218 +1. Arduino
219 +1. USB TO TTL Adapter
160 160  
221 +[[image:image-20220602100052-2.png||height="385" width="600"]]
161 161  
162 -[[image:image-20220909151517-2.png||height="543" width="708"]]
163 163  
224 +=== 2.8.2  Connection ===
164 164  
165 165  
166 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
227 +[[image:image-20220602101311-3.png||height="276" width="600"]]
167 167  
168 168  
169 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
230 +(((
231 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
232 +)))
170 170  
234 +(((
235 +(% style="background-color:yellow" %)**GND  <-> GND
236 +TXD  <->  TXD
237 +RXD  <->  RXD**
238 +)))
171 171  
172 172  
173 -(% style="color:blue" %)**6.  Network successfully.**
241 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
174 174  
243 +Connect USB TTL Adapter to PC after connecting the wires
175 175  
176 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
177 177  
246 +[[image:image-20220602102240-4.png||height="304" width="600"]]
178 178  
179 179  
180 -(% style="color:blue" %)**7.  Send uplink using command**
249 +=== 2.8.3  Upgrade steps ===
181 181  
182 182  
183 -[[image:image-20220912085244-1.png]]
252 +==== 1.  Switch SW1 to put in ISP position ====
184 184  
185 185  
186 -[[image:image-20220912085307-2.png]]
255 +[[image:image-20220602102824-5.png||height="306" width="600"]]
187 187  
188 188  
189 189  
190 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
259 +==== 2.  Press the RST switch once ====
191 191  
192 192  
193 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
262 +[[image:image-20220602104701-12.png||height="285" width="600"]]
194 194  
195 195  
196 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
197 197  
198 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
266 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
199 199  
200 200  
201 -(% style="color:red" %)**Preconditions:**
269 +(((
270 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
271 +)))
202 202  
203 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
204 204  
205 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
274 +[[image:image-20220602103227-6.png]]
206 206  
207 207  
277 +[[image:image-20220602103357-7.png]]
208 208  
209 -(% style="color:blue" %)**Steps for usage:**
210 210  
211 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
212 212  
213 -(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
281 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
282 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
214 214  
215 -(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
216 216  
285 +[[image:image-20220602103844-8.png]]
217 217  
218 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
219 219  
220 220  
221 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
289 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
290 +(% style="color:blue" %)**3. Select the bin file to burn**
222 222  
223 223  
224 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
293 +[[image:image-20220602104144-9.png]]
225 225  
226 226  
227 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
296 +[[image:image-20220602104251-10.png]]
228 228  
229 229  
230 -[[image:image-20220723100439-2.png]]
299 +[[image:image-20220602104402-11.png]]
231 231  
232 232  
233 233  
234 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
303 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
304 +(% style="color:blue" %)**4. Click to start the download**
235 235  
306 +[[image:image-20220602104923-13.png]]
236 236  
237 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
238 238  
239 - (% style="background-color:yellow" %)**apt update**
240 240  
241 - (% style="background-color:yellow" %)**apt install minicom**
310 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
311 +(% style="color:blue" %)**5. Check update process**
242 242  
243 243  
244 -Use minicom to connect to the RPI's terminal
314 +[[image:image-20220602104948-14.png]]
245 245  
246 -[[image:image-20220602153146-3.png||height="439" width="500"]]
247 247  
248 248  
318 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
319 +(% style="color:blue" %)**The following picture shows that the burning is successful**
249 249  
250 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
321 +[[image:image-20220602105251-15.png]]
251 251  
252 252  
253 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
254 254  
325 += 3.  LA66 USB LoRaWAN Adapter =
255 255  
256 -[[image:image-20220602154928-5.png||height="436" width="500"]]
257 257  
328 +== 3.1  Overview ==
258 258  
259 259  
260 -(% style="color:blue" %)**4.  Send Uplink message**
331 +[[image:image-20220715001142-3.png||height="145" width="220"]]
261 261  
262 262  
263 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
334 +(((
335 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
336 +)))
264 264  
265 -example: AT+SENDB=01,02,8,05820802581ea0a5
338 +(((
339 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
340 +)))
266 266  
342 +(((
343 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
344 +)))
267 267  
268 -[[image:image-20220602160339-6.png||height="517" width="600"]]
346 +(((
347 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
348 +)))
269 269  
350 +(((
351 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
352 +)))
270 270  
271 271  
272 -Check to see if TTN received the message
273 273  
356 +== 3.2  Features ==
274 274  
275 -[[image:image-20220602160627-7.png||height="369" width="800"]]
358 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
359 +* Ultra-long RF range
360 +* Support LoRaWAN v1.0.4 protocol
361 +* Support peer-to-peer protocol
362 +* TCXO crystal to ensure RF performance on low temperature
363 +* Spring RF antenna
364 +* Available in different frequency LoRaWAN frequency bands.
365 +* World-wide unique OTAA keys.
366 +* AT Command via UART-TTL interface
367 +* Firmware upgradable via UART interface
368 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
276 276  
277 277  
278 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
279 279  
280 -=== 1.9.1  Hardware and Software Connection ===
372 +== 3.3  Specification ==
281 281  
374 +* CPU: 32-bit 48 MHz
375 +* Flash: 256KB
376 +* RAM: 64KB
377 +* Input Power Range: 5v
378 +* Frequency Range: 150 MHz ~~ 960 MHz
379 +* Maximum Power +22 dBm constant RF output
380 +* High sensitivity: -148 dBm
381 +* Temperature:
382 +** Storage: -55 ~~ +125℃
383 +** Operating: -40 ~~ +85℃
384 +* Humidity:
385 +** Storage: 5 ~~ 95% (Non-Condensing)
386 +** Operating: 10 ~~ 95% (Non-Condensing)
387 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
388 +* LoRa Rx current: <9 mA
282 282  
283 283  
284 -==== (% style="color:blue" %)**Overview：**(%%) ====
285 285  
392 +== 3.4  Pin Mapping & LED ==
286 286  
287 -(((
288 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
289 289  
290 -* Send real-time location information of mobile phone to LoRaWAN network.
291 -* Check LoRaWAN network signal strengh.
292 -* Manually send messages to LoRaWAN network.
293 -)))
294 294  
396 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
295 295  
296 296  
399 +(((
400 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
401 +)))
297 297  
298 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
299 299  
404 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
300 300  
301 -A USB to Type-C adapter is needed to connect to a Mobile phone.
302 302  
303 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
407 +[[image:image-20220602171217-1.png||height="538" width="800"]]
304 304  
305 -[[image:image-20220813174353-2.png||height="360" width="313"]]
306 306  
410 +Open the serial port tool
307 307  
412 +[[image:image-20220602161617-8.png]]
308 308  
309 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
414 +[[image:image-20220602161718-9.png||height="457" width="800"]]
310 310  
311 311  
312 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
313 313  
418 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
314 314  
315 -[[image:image-20220813173738-1.png]]
420 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
316 316  
317 317  
423 +[[image:image-20220602161935-10.png||height="498" width="800"]]
318 318  
319 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
320 320  
321 321  
322 -Function and page introduction
427 +(% style="color:blue" %)**3. See Uplink Command**
323 323  
429 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
324 324  
325 -[[image:image-20220723113448-7.png||height="995" width="450"]]
431 +example: AT+SENDB=01,02,8,05820802581ea0a5
326 326  
433 +[[image:image-20220602162157-11.png||height="497" width="800"]]
327 327  
328 -**Block Explain:**
329 329  
330 -1.  Display LA66 USB LoRaWAN Module connection status
331 331  
332 -2.  Check and reconnect
437 +(% style="color:blue" %)**4. Check to see if TTN received the message**
333 333  
334 -3.  Turn send timestamps on or off
439 +[[image:image-20220602162331-12.png||height="420" width="800"]]
335 335  
336 -4.  Display LoRaWan connection status
337 337  
338 -5.  Check LoRaWan connection status
339 339  
340 -6.  The RSSI value of the node when the ACK is received
443 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
341 341  
342 -7.  Node's Signal Strength Icon
343 343  
344 -8.  Configure Location Uplink Interval
446 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
345 345  
346 -9.  AT command input box
347 347  
348 -10.  Send Button:  Send input box info to LA66 USB Adapter
449 +(% style="color:red" %)**Preconditions:**
349 349  
350 -11.  Output Log from LA66 USB adapter
451 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
351 351  
352 -12.  clear log button
453 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
353 353  
354 -13.  exit button
355 355  
356 356  
457 +(% style="color:blue" %)**Steps for usage:**
357 357  
358 -LA66 USB LoRaWAN Module not connected
459 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
359 359  
461 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
360 360  
361 -[[image:image-20220723110520-5.png||height="677" width="508"]]
463 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
362 362  
363 363  
364 364  
365 -Connect LA66 USB LoRaWAN Module
467 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
366 366  
367 367  
368 -[[image:image-20220723110626-6.png||height="681" width="511"]]
470 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
369 369  
370 370  
473 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
371 371  
475 +[[image:image-20220602171233-2.png||height="538" width="800"]]
372 372  
373 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
374 374  
375 375  
376 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
479 +(% style="color:blue" %)**2. Install Minicom in RPi.**
377 377  
481 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
378 378  
379 -[[image:image-20220723134549-8.png]]
483 + (% style="background-color:yellow" %)**apt update**
380 380  
485 + (% style="background-color:yellow" %)**apt install minicom**
381 381  
382 382  
383 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
488 +Use minicom to connect to the RPI's terminal
384 384  
490 +[[image:image-20220602153146-3.png||height="439" width="500"]]
385 385  
386 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
387 387  
388 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
389 389  
390 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
494 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
391 391  
392 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
496 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
393 393  
394 394  
395 -Example output in NodeRed is as below:
499 +[[image:image-20220602154928-5.png||height="436" width="500"]]
396 396  
397 -[[image:image-20220723144339-1.png]]
398 398  
399 399  
400 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
503 +(% style="color:blue" %)**4. Send Uplink message**
401 401  
505 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
402 402  
403 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
507 +example: AT+SENDB=01,02,8,05820802581ea0a5
404 404  
405 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
406 406  
510 +[[image:image-20220602160339-6.png||height="517" width="600"]]
407 407  
408 -[[image:image-20220723150132-2.png]]
409 409  
410 410  
411 -= 2.  FAQ =
514 +Check to see if TTN received the message
412 412  
413 -== 2.1  How to Compile Source Code for LA66? ==
516 +[[image:image-20220602160627-7.png||height="369" width="800"]]
414 414  
415 415  
416 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
417 417  
520 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
418 418  
419 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
420 420  
421 421  
422 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
524 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
423 423  
424 424  
425 -= 3.  Order Info =
426 426  
427 427  
428 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
529 += 4.  Order Info =
429 429  
430 430  
532 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
533 +
534 +
431 431  (% style="color:blue" %)**XXX**(%%): The default frequency band
432 432  
433 433  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -441,40 +441,6 @@
441 441  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
442 442  
443 443  
548 += 5.  Reference =
444 444  
445 -= 4.  Reference =
446 -
447 -
448 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
449 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
450 -
451 -
452 -
453 -= 5.  FCC Statement =
454 -
455 -
456 -(% style="color:red" %)**FCC Caution:**
457 -
458 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
459 -
460 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
461 -
462 -
463 -(% style="color:red" %)**IMPORTANT NOTE: **
464 -
465 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
466 -
467 -—Reorient or relocate the receiving antenna.
468 -
469 -—Increase the separation between the equipment and receiver.
470 -
471 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
472 -
473 -—Consult the dealer or an experienced radio/TV technician for help.
474 -
475 -
476 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
477 -
478 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
479 -
480 -
550 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content