Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 158.1
edited by Bei Jinggeng
on 2022/12/10 14:13
Change comment: There is no comment for this version
To version 100.5
edited by Xiaoling
on 2022/07/19 11:45
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Xiaoling
Content
... ... @@ -6,26 +6,34 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
15 +(((
16 +(((
17 +[[image:image-20220719093358-2.png||height="145" width="220"]](% style="color:blue" %)** **
18 +)))
15 15  
20 +(((
21 +
22 +)))
16 16  
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 20  (((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
25 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
22 22  )))
27 +)))
23 23  
24 24  (((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
30 +(((
31 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 26  )))
33 +)))
27 27  
28 28  (((
36 +(((
29 29  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 30  )))
31 31  
... ... @@ -32,36 +32,35 @@
32 32  (((
33 33  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 34  )))
43 +)))
35 35  
36 36  (((
46 +(((
37 37  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 38  )))
49 +)))
39 39  
40 40  
41 41  
42 42  == 1.2  Features ==
43 43  
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
58 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
63 +* Ultra-long RF range
56 56  
57 -
58 58  == 1.3  Specification ==
59 59  
60 -
61 61  * CPU: 32-bit 48 MHz
62 62  * Flash: 256KB
63 63  * RAM: 64KB
64 -* Input Power Range: 5v
70 +* Input Power Range: 1.8v ~~ 3.7v
71 +* Power Consumption: < 4uA.
65 65  * Frequency Range: 150 MHz ~~ 960 MHz
66 66  * Maximum Power +22 dBm constant RF output
67 67  * High sensitivity: -148 dBm
... ... @@ -73,375 +73,451 @@
73 73  ** Operating: 10 ~~ 95% (Non-Condensing)
74 74  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
75 75  * LoRa Rx current: <9 mA
83 +* I/O Voltage: 3.3v
76 76  
85 +== 1.4  AT Command ==
77 77  
78 -== 1.4  Pin Mapping & LED ==
79 79  
88 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
80 80  
81 -[[image:image-20220813183239-3.png||height="526" width="662"]]
82 82  
83 83  
92 +== 1.5  Dimension ==
84 84  
85 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
94 +[[image:image-20220718094750-3.png]]
86 86  
87 87  
88 -(((
89 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
90 -)))
91 91  
92 92  
93 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
99 +== 1.6  Pin Mapping ==
94 94  
95 95  
96 -[[image:image-20220723100027-1.png]]
102 +[[image:image-20220719093156-1.png]]
97 97  
98 98  
99 -Open the serial port tool
100 100  
101 -[[image:image-20220602161617-8.png]]
106 +== 1.7  Land Pattern ==
102 102  
108 +[[image:image-20220517072821-2.png]]
103 103  
104 -[[image:image-20220602161718-9.png||height="457" width="800"]]
105 105  
106 106  
112 += 2.  LA66 LoRaWAN Shield =
107 107  
108 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
109 109  
115 +== 2.1  Overview ==
110 110  
111 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
112 112  
118 +(((
119 +[[image:image-20220715000826-2.png||height="145" width="220"]]
120 +)))
113 113  
114 -[[image:image-20220602161935-10.png||height="498" width="800"]]
122 +(((
123 +
124 +)))
115 115  
126 +(((
127 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
128 +)))
116 116  
130 +(((
131 +(((
132 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely.  This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
133 +)))
134 +)))
117 117  
118 -(% style="color:blue" %)**3.  See Uplink Command**
136 +(((
137 +(((
138 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
139 +)))
140 +)))
119 119  
142 +(((
143 +(((
144 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
145 +)))
146 +)))
120 120  
121 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
148 +(((
149 +(((
150 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
151 +)))
152 +)))
122 122  
123 -example: AT+SENDB=01,02,8,05820802581ea0a5
124 124  
125 -[[image:image-20220602162157-11.png||height="497" width="800"]]
126 126  
156 +== 2.2  Features ==
127 127  
158 +* Arduino Shield base on LA66 LoRaWAN module
159 +* Support LoRaWAN v1.0.4 protocol
160 +* Support peer-to-peer protocol
161 +* TCXO crystal to ensure RF performance on low temperature
162 +* SMA connector
163 +* Available in different frequency LoRaWAN frequency bands.
164 +* World-wide unique OTAA keys.
165 +* AT Command via UART-TTL interface
166 +* Firmware upgradable via UART interface
167 +* Ultra-long RF range
128 128  
129 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
169 +== 2.3  Specification ==
130 130  
171 +* CPU: 32-bit 48 MHz
172 +* Flash: 256KB
173 +* RAM: 64KB
174 +* Input Power Range: 1.8v ~~ 3.7v
175 +* Power Consumption: < 4uA.
176 +* Frequency Range: 150 MHz ~~ 960 MHz
177 +* Maximum Power +22 dBm constant RF output
178 +* High sensitivity: -148 dBm
179 +* Temperature:
180 +** Storage: -55 ~~ +125℃
181 +** Operating: -40 ~~ +85℃
182 +* Humidity:
183 +** Storage: 5 ~~ 95% (Non-Condensing)
184 +** Operating: 10 ~~ 95% (Non-Condensing)
185 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
186 +* LoRa Rx current: <9 mA
187 +* I/O Voltage: 3.3v
131 131  
132 -[[image:image-20220817093644-1.png]]
189 +== 2.4  Pin Mapping & LED ==
133 133  
134 134  
135 135  
136 -== 1.6  Example: How to join helium ==
193 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
137 137  
138 138  
139 139  
140 -(% style="color:blue" %)**1.  Create a new device.**
197 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
141 141  
142 142  
143 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
144 144  
201 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
145 145  
146 146  
147 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
148 148  
205 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
149 149  
150 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
151 151  
208 +=== 2.8.1  Items needed for update ===
152 152  
210 +1. LA66 LoRaWAN Shield
211 +1. Arduino
212 +1. USB TO TTL Adapter
153 153  
154 -(% style="color:blue" %)**3.  Use AT commands.**
214 +[[image:image-20220602100052-2.png||height="385" width="600"]]
155 155  
156 156  
157 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
217 +=== 2.8.2  Connection ===
158 158  
159 159  
220 +[[image:image-20220602101311-3.png||height="276" width="600"]]
160 160  
161 -(% style="color:blue" %)**4.  Use the serial port tool**
162 162  
223 +(((
224 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
225 +)))
163 163  
164 -[[image:image-20220909151517-2.png||height="543" width="708"]]
227 +(((
228 +(% style="background-color:yellow" %)**GND  <-> GND
229 +TXD  <->  TXD
230 +RXD  <->  RXD**
231 +)))
165 165  
166 166  
234 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
167 167  
168 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
236 +Connect USB TTL Adapter to PC after connecting the wires
169 169  
170 170  
171 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
239 +[[image:image-20220602102240-4.png||height="304" width="600"]]
172 172  
173 173  
242 +=== 2.8.3  Upgrade steps ===
174 174  
175 -(% style="color:blue" %)**6.  Network successfully.**
176 176  
245 +==== 1.  Switch SW1 to put in ISP position ====
177 177  
178 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
179 179  
248 +[[image:image-20220602102824-5.png||height="306" width="600"]]
180 180  
181 181  
182 -(% style="color:blue" %)**7.  Send uplink using command**
183 183  
252 +==== 2.  Press the RST switch once ====
184 184  
185 -[[image:image-20220912085244-1.png]]
186 186  
255 +[[image:image-20220602104701-12.png||height="285" width="600"]]
187 187  
188 -[[image:image-20220912085307-2.png]]
189 189  
190 190  
259 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
191 191  
192 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
193 193  
262 +(((
263 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
264 +)))
194 194  
195 195  
196 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
267 +[[image:image-20220602103227-6.png]]
197 197  
198 198  
199 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
270 +[[image:image-20220602103357-7.png]]
200 200  
201 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
202 202  
203 203  
204 -(% style="color:red" %)**Preconditions:**
274 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
275 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
205 205  
206 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
207 207  
208 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
278 +[[image:image-20220602103844-8.png]]
209 209  
210 210  
211 211  
212 -(% style="color:blue" %)**Steps for usage:**
282 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
283 +(% style="color:blue" %)**3. Select the bin file to burn**
213 213  
214 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
215 215  
216 -(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
286 +[[image:image-20220602104144-9.png]]
217 217  
218 -(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
219 219  
289 +[[image:image-20220602104251-10.png]]
220 220  
221 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
222 222  
292 +[[image:image-20220602104402-11.png]]
223 223  
224 224  
225 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
226 226  
296 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
297 +(% style="color:blue" %)**4. Click to start the download**
227 227  
228 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
299 +[[image:image-20220602104923-13.png]]
229 229  
230 230  
231 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
232 232  
303 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
304 +(% style="color:blue" %)**5. Check update process**
233 233  
234 -[[image:image-20220723100439-2.png]]
235 235  
307 +[[image:image-20220602104948-14.png]]
236 236  
237 237  
238 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
239 239  
311 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
312 +(% style="color:blue" %)**The following picture shows that the burning is successful**
240 240  
241 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
314 +[[image:image-20220602105251-15.png]]
242 242  
243 - (% style="background-color:yellow" %)**apt update**
244 244  
245 - (% style="background-color:yellow" %)**apt install minicom**
246 246  
318 += 3.  LA66 USB LoRaWAN Adapter =
247 247  
248 -Use minicom to connect to the RPI's terminal
249 249  
250 -[[image:image-20220602153146-3.png||height="439" width="500"]]
321 +== 3.1  Overview ==
251 251  
252 252  
324 +[[image:image-20220715001142-3.png||height="145" width="220"]]
253 253  
254 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
255 255  
327 +(((
328 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
329 +)))
256 256  
257 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
331 +(((
332 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
333 +)))
258 258  
335 +(((
336 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
337 +)))
259 259  
260 -[[image:image-20220602154928-5.png||height="436" width="500"]]
339 +(((
340 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
341 +)))
261 261  
343 +(((
344 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
345 +)))
262 262  
263 263  
264 -(% style="color:blue" %)**4.  Send Uplink message**
265 265  
349 +== 3.2  Features ==
266 266  
267 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
351 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
352 +* Ultra-long RF range
353 +* Support LoRaWAN v1.0.4 protocol
354 +* Support peer-to-peer protocol
355 +* TCXO crystal to ensure RF performance on low temperature
356 +* Spring RF antenna
357 +* Available in different frequency LoRaWAN frequency bands.
358 +* World-wide unique OTAA keys.
359 +* AT Command via UART-TTL interface
360 +* Firmware upgradable via UART interface
361 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
268 268  
269 -example: AT+SENDB=01,02,8,05820802581ea0a5
270 270  
271 271  
272 -[[image:image-20220602160339-6.png||height="517" width="600"]]
365 +== 3.3  Specification ==
273 273  
367 +* CPU: 32-bit 48 MHz
368 +* Flash: 256KB
369 +* RAM: 64KB
370 +* Input Power Range: 5v
371 +* Frequency Range: 150 MHz ~~ 960 MHz
372 +* Maximum Power +22 dBm constant RF output
373 +* High sensitivity: -148 dBm
374 +* Temperature:
375 +** Storage: -55 ~~ +125℃
376 +** Operating: -40 ~~ +85℃
377 +* Humidity:
378 +** Storage: 5 ~~ 95% (Non-Condensing)
379 +** Operating: 10 ~~ 95% (Non-Condensing)
380 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
381 +* LoRa Rx current: <9 mA
274 274  
275 275  
276 -Check to see if TTN received the message
277 277  
385 +== 3.4  Pin Mapping & LED ==
278 278  
279 -[[image:image-20220602160627-7.png||height="369" width="800"]]
280 280  
281 281  
389 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
282 282  
283 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
284 284  
285 -
286 -=== 1.9.1  Hardware and Software Connection ===
287 -
288 -
289 -
290 -==== (% style="color:blue" %)**Overview：**(%%) ====
291 -
292 -
293 293  (((
294 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
295 -
296 -* Send real-time location information of mobile phone to LoRaWAN network.
297 -* Check LoRaWAN network signal strengh.
298 -* Manually send messages to LoRaWAN network.
393 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
299 299  )))
300 300  
301 301  
397 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
302 302  
303 303  
400 +[[image:image-20220602171217-1.png||height="538" width="800"]]
304 304  
305 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
306 306  
403 +Open the serial port tool
307 307  
308 -A USB to Type-C adapter is needed to connect to a Mobile phone.
405 +[[image:image-20220602161617-8.png]]
309 309  
310 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
407 +[[image:image-20220602161718-9.png||height="457" width="800"]]
311 311  
312 -[[image:image-20220813174353-2.png||height="360" width="313"]]
313 313  
314 314  
411 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
315 315  
413 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
316 316  
317 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
318 318  
416 +[[image:image-20220602161935-10.png||height="498" width="800"]]
319 319  
320 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
321 321  
322 322  
323 -[[image:image-20220813173738-1.png]]
420 +(% style="color:blue" %)**3. See Uplink Command**
324 324  
422 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
325 325  
424 +example: AT+SENDB=01,02,8,05820802581ea0a5
326 326  
426 +[[image:image-20220602162157-11.png||height="497" width="800"]]
327 327  
328 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
329 329  
330 330  
331 -Function and page introduction
430 +(% style="color:blue" %)**4. Check to see if TTN received the message**
332 332  
432 +[[image:image-20220602162331-12.png||height="420" width="800"]]
333 333  
334 -[[image:image-20220723113448-7.png||height="995" width="450"]]
335 335  
336 336  
337 -**Block Explain:**
436 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
338 338  
339 -1.  Display LA66 USB LoRaWAN Module connection status
340 340  
341 -2.  Check and reconnect
439 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
342 342  
343 -3.  Turn send timestamps on or off
344 344  
345 -4.  Display LoRaWan connection status
442 +(% style="color:red" %)**Preconditions:**
346 346  
347 -5.  Check LoRaWan connection status
444 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
348 348  
349 -6.  The RSSI value of the node when the ACK is received
446 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
350 350  
351 -7.  Node's Signal Strength Icon
352 352  
353 -8.  Configure Location Uplink Interval
354 354  
355 -9.  AT command input box
450 +(% style="color:blue" %)**Steps for usage:**
356 356  
357 -10.  Send Button:  Send input box info to LA66 USB Adapter
452 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
358 358  
359 -11.  Output Log from LA66 USB adapter
454 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
360 360  
361 -12.  clear log button
456 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
362 362  
363 -13.  exit button
364 364  
365 365  
460 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
366 366  
367 -LA66 USB LoRaWAN Module not connected
368 368  
463 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
369 369  
370 -[[image:image-20220723110520-5.png||height="677" width="508"]]
371 371  
466 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
372 372  
468 +[[image:image-20220602171233-2.png||height="538" width="800"]]
373 373  
374 -Connect LA66 USB LoRaWAN Module
375 375  
376 376  
377 -[[image:image-20220723110626-6.png||height="681" width="511"]]
472 +(% style="color:blue" %)**2. Install Minicom in RPi.**
378 378  
474 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
379 379  
476 + (% style="background-color:yellow" %)**apt update**
380 380  
478 + (% style="background-color:yellow" %)**apt install minicom**
381 381  
382 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
383 383  
481 +Use minicom to connect to the RPI's terminal
384 384  
385 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
483 +[[image:image-20220602153146-3.png||height="439" width="500"]]
386 386  
387 387  
388 -[[image:image-20220723134549-8.png]]
389 389  
487 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
390 390  
489 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
391 391  
392 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
393 393  
492 +[[image:image-20220602154928-5.png||height="436" width="500"]]
394 394  
395 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
396 396  
397 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
398 398  
399 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
496 +(% style="color:blue" %)**4. Send Uplink message**
400 400  
401 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
498 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
402 402  
500 +example: AT+SENDB=01,02,8,05820802581ea0a5
403 403  
404 -Example output in NodeRed is as below:
405 405  
406 -[[image:image-20220723144339-1.png]]
503 +[[image:image-20220602160339-6.png||height="517" width="600"]]
407 407  
408 408  
409 409  
410 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
507 +Check to see if TTN received the message
411 411  
509 +[[image:image-20220602160627-7.png||height="369" width="800"]]
412 412  
413 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
414 414  
415 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
416 416  
513 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
417 417  
418 -[[image:image-20220723150132-2.png]]
419 419  
420 420  
517 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
421 421  
422 -= 2.  FAQ =
423 423  
424 424  
425 -== 2.1  How to Compile Source Code for LA66? ==
426 426  
522 += 4.  Order Info =
427 427  
428 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
429 429  
525 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
430 430  
431 431  
432 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
433 -
434 -
435 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
436 -
437 -
438 -
439 -= 3.  Order Info =
440 -
441 -
442 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
443 -
444 -
445 445  (% style="color:blue" %)**XXX**(%%): The default frequency band
446 446  
447 447  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -455,36 +455,7 @@
455 455  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
456 456  
457 457  
458 -= 4.  Reference =
459 459  
542 += 5.  Reference =
460 460  
461 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
462 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
463 -
464 -
465 -= 5.  FCC Statement =
466 -
467 -
468 -(% style="color:red" %)**FCC Caution:**
469 -
470 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
471 -
472 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
473 -
474 -
475 -(% style="color:red" %)**IMPORTANT NOTE: **
476 -
477 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
478 -
479 -—Reorient or relocate the receiving antenna.
480 -
481 -—Increase the separation between the equipment and receiver.
482 -
483 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
484 -
485 -—Consult the dealer or an experienced radio/TV technician for help.
486 -
487 -
488 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
489 -
490 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
544 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content