Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 158.1
edited by Bei Jinggeng
on 2022/12/10 14:13
Change comment: There is no comment for this version
To version 100.1
edited by Xiaoling
on 2022/07/19 09:34
Change comment: Uploaded new attachment "image-20220719093358-2.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Xiaoling
Content
... ... @@ -6,23 +6,20 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
15 -
16 -
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 20  (((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
16 +[[image:image-20220715000242-1.png||height="110" width="132"]]
17 +
18 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
22 22  )))
23 23  
24 24  (((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
22 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 26  )))
27 27  
28 28  (((
... ... @@ -38,30 +38,27 @@
38 38  )))
39 39  
40 40  
41 -
42 42  == 1.2  Features ==
43 43  
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
43 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
48 +* Ultra-long RF range
56 56  
57 57  
51 +
58 58  == 1.3  Specification ==
59 59  
60 -
61 61  * CPU: 32-bit 48 MHz
62 62  * Flash: 256KB
63 63  * RAM: 64KB
64 -* Input Power Range: 5v
57 +* Input Power Range: 1.8v ~~ 3.7v
58 +* Power Consumption: < 4uA.
65 65  * Frequency Range: 150 MHz ~~ 960 MHz
66 66  * Maximum Power +22 dBm constant RF output
67 67  * High sensitivity: -148 dBm
... ... @@ -73,375 +73,419 @@
73 73  ** Operating: 10 ~~ 95% (Non-Condensing)
74 74  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
75 75  * LoRa Rx current: <9 mA
70 +* I/O Voltage: 3.3v
76 76  
77 77  
78 -== 1.4  Pin Mapping & LED ==
79 79  
80 80  
81 -[[image:image-20220813183239-3.png||height="526" width="662"]]
75 +== 1.4  AT Command ==
82 82  
83 83  
78 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
84 84  
85 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
86 86  
87 87  
88 -(((
89 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
90 -)))
82 +== 1.5  Dimension ==
91 91  
84 +[[image:image-20220718094750-3.png]]
92 92  
93 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
94 94  
95 95  
96 -[[image:image-20220723100027-1.png]]
97 97  
89 +== 1.6  Pin Mapping ==
98 98  
99 -Open the serial port tool
100 100  
101 -[[image:image-20220602161617-8.png]]
92 +[[image:image-20220523101537-1.png]]
102 102  
103 103  
104 -[[image:image-20220602161718-9.png||height="457" width="800"]]
105 105  
96 +== 1.7  Land Pattern ==
106 106  
98 +[[image:image-20220517072821-2.png]]
107 107  
108 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
109 109  
110 110  
111 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
102 += 2.  LA66 LoRaWAN Shield =
112 112  
113 113  
114 -[[image:image-20220602161935-10.png||height="498" width="800"]]
105 +== 2.1  Overview ==
115 115  
116 116  
108 +[[image:image-20220715000826-2.png||height="386" width="449"]]
117 117  
118 -(% style="color:blue" %)**3.  See Uplink Command**
119 119  
111 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
120 120  
121 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
113 +(((
114 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
115 +)))
122 122  
123 -example: AT+SENDB=01,02,8,05820802581ea0a5
117 +(((
118 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
119 +)))
124 124  
125 -[[image:image-20220602162157-11.png||height="497" width="800"]]
121 +(((
122 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
123 +)))
126 126  
125 +(((
126 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
127 +)))
127 127  
128 128  
129 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
130 +== 2.2  Features ==
130 130  
132 +* Arduino Shield base on LA66 LoRaWAN module
133 +* Support LoRaWAN v1.0.4 protocol
134 +* Support peer-to-peer protocol
135 +* TCXO crystal to ensure RF performance on low temperature
136 +* SMA connector
137 +* Available in different frequency LoRaWAN frequency bands.
138 +* World-wide unique OTAA keys.
139 +* AT Command via UART-TTL interface
140 +* Firmware upgradable via UART interface
141 +* Ultra-long RF range
131 131  
132 -[[image:image-20220817093644-1.png]]
143 +== 2.3  Specification ==
133 133  
145 +* CPU: 32-bit 48 MHz
146 +* Flash: 256KB
147 +* RAM: 64KB
148 +* Input Power Range: 1.8v ~~ 3.7v
149 +* Power Consumption: < 4uA.
150 +* Frequency Range: 150 MHz ~~ 960 MHz
151 +* Maximum Power +22 dBm constant RF output
152 +* High sensitivity: -148 dBm
153 +* Temperature:
154 +** Storage: -55 ~~ +125℃
155 +** Operating: -40 ~~ +85℃
156 +* Humidity:
157 +** Storage: 5 ~~ 95% (Non-Condensing)
158 +** Operating: 10 ~~ 95% (Non-Condensing)
159 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
160 +* LoRa Rx current: <9 mA
161 +* I/O Voltage: 3.3v
134 134  
163 +== 2.4  Pin Mapping & LED ==
135 135  
136 -== 1.6  Example: How to join helium ==
137 137  
138 138  
167 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
139 139  
140 -(% style="color:blue" %)**1.  Create a new device.**
141 141  
142 142  
143 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
171 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
144 144  
145 145  
146 146  
147 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
175 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
148 148  
149 149  
150 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
151 151  
179 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
152 152  
153 153  
154 -(% style="color:blue" %)**3.  Use AT commands.**
182 +=== 2.8.1  Items needed for update ===
155 155  
184 +1. LA66 LoRaWAN Shield
185 +1. Arduino
186 +1. USB TO TTL Adapter
156 156  
157 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
188 +[[image:image-20220602100052-2.png||height="385" width="600"]]
158 158  
159 159  
191 +=== 2.8.2  Connection ===
160 160  
161 -(% style="color:blue" %)**4.  Use the serial port tool**
162 162  
194 +[[image:image-20220602101311-3.png||height="276" width="600"]]
163 163  
164 -[[image:image-20220909151517-2.png||height="543" width="708"]]
165 165  
197 +(((
198 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
199 +)))
166 166  
201 +(((
202 +(% style="background-color:yellow" %)**GND  <-> GND
203 +TXD  <->  TXD
204 +RXD  <->  RXD**
205 +)))
167 167  
168 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
169 169  
208 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
170 170  
171 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
210 +Connect USB TTL Adapter to PC after connecting the wires
172 172  
173 173  
213 +[[image:image-20220602102240-4.png||height="304" width="600"]]
174 174  
175 -(% style="color:blue" %)**6.  Network successfully.**
176 176  
216 +=== 2.8.3  Upgrade steps ===
177 177  
178 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
179 179  
219 +==== 1.  Switch SW1 to put in ISP position ====
180 180  
181 181  
182 -(% style="color:blue" %)**7.  Send uplink using command**
222 +[[image:image-20220602102824-5.png||height="306" width="600"]]
183 183  
184 184  
185 -[[image:image-20220912085244-1.png]]
186 186  
226 +==== 2.  Press the RST switch once ====
187 187  
188 -[[image:image-20220912085307-2.png]]
189 189  
229 +[[image:image-20220602104701-12.png||height="285" width="600"]]
190 190  
191 191  
192 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
193 193  
233 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
194 194  
195 195  
196 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
236 +(((
237 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
238 +)))
197 197  
198 198  
199 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
241 +[[image:image-20220602103227-6.png]]
200 200  
201 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
202 202  
244 +[[image:image-20220602103357-7.png]]
203 203  
204 -(% style="color:red" %)**Preconditions:**
205 205  
206 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
207 207  
208 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
248 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
249 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
209 209  
210 210  
252 +[[image:image-20220602103844-8.png]]
211 211  
212 -(% style="color:blue" %)**Steps for usage:**
213 213  
214 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
215 215  
216 -(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
256 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
257 +(% style="color:blue" %)**3. Select the bin file to burn**
217 217  
218 -(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
219 219  
260 +[[image:image-20220602104144-9.png]]
220 220  
221 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
222 222  
263 +[[image:image-20220602104251-10.png]]
223 223  
224 224  
225 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
266 +[[image:image-20220602104402-11.png]]
226 226  
227 227  
228 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
229 229  
270 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
271 +(% style="color:blue" %)**4. Click to start the download**
230 230  
231 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
273 +[[image:image-20220602104923-13.png]]
232 232  
233 233  
234 -[[image:image-20220723100439-2.png]]
235 235  
277 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
278 +(% style="color:blue" %)**5. Check update process**
236 236  
237 237  
238 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
281 +[[image:image-20220602104948-14.png]]
239 239  
240 240  
241 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
242 242  
243 - (% style="background-color:yellow" %)**apt update**
285 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
286 +(% style="color:blue" %)**The following picture shows that the burning is successful**
244 244  
245 - (% style="background-color:yellow" %)**apt install minicom**
288 +[[image:image-20220602105251-15.png]]
246 246  
247 247  
248 -Use minicom to connect to the RPI's terminal
249 249  
250 -[[image:image-20220602153146-3.png||height="439" width="500"]]
292 += 3.  LA66 USB LoRaWAN Adapter =
251 251  
252 252  
295 +== 3.1  Overview ==
253 253  
254 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
297 +[[image:image-20220715001142-3.png||height="145" width="220"]]
255 255  
299 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
256 256  
257 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
301 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
258 258  
303 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
259 259  
260 -[[image:image-20220602154928-5.png||height="436" width="500"]]
305 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
261 261  
307 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
262 262  
263 263  
264 -(% style="color:blue" %)**4.  Send Uplink message**
310 +== 3.2  Features ==
265 265  
312 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
313 +* Ultra-long RF range
314 +* Support LoRaWAN v1.0.4 protocol
315 +* Support peer-to-peer protocol
316 +* TCXO crystal to ensure RF performance on low temperature
317 +* Spring RF antenna
318 +* Available in different frequency LoRaWAN frequency bands.
319 +* World-wide unique OTAA keys.
320 +* AT Command via UART-TTL interface
321 +* Firmware upgradable via UART interface
322 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
266 266  
267 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
324 +== 3.3  Specification ==
268 268  
269 -example: AT+SENDB=01,02,8,05820802581ea0a5
326 +* CPU: 32-bit 48 MHz
327 +* Flash: 256KB
328 +* RAM: 64KB
329 +* Input Power Range: 5v
330 +* Frequency Range: 150 MHz ~~ 960 MHz
331 +* Maximum Power +22 dBm constant RF output
332 +* High sensitivity: -148 dBm
333 +* Temperature:
334 +** Storage: -55 ~~ +125℃
335 +** Operating: -40 ~~ +85℃
336 +* Humidity:
337 +** Storage: 5 ~~ 95% (Non-Condensing)
338 +** Operating: 10 ~~ 95% (Non-Condensing)
339 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
340 +* LoRa Rx current: <9 mA
270 270  
342 +== 3.4  Pin Mapping & LED ==
271 271  
272 -[[image:image-20220602160339-6.png||height="517" width="600"]]
273 273  
274 274  
346 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
275 275  
276 -Check to see if TTN received the message
277 277  
349 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
278 278  
279 -[[image:image-20220602160627-7.png||height="369" width="800"]]
280 280  
352 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
281 281  
282 282  
283 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
355 +[[image:image-20220602171217-1.png||height="538" width="800"]]
284 284  
285 285  
286 -=== 1.9.1  Hardware and Software Connection ===
358 +Open the serial port tool
287 287  
360 +[[image:image-20220602161617-8.png]]
288 288  
362 +[[image:image-20220602161718-9.png||height="457" width="800"]]
289 289  
290 -==== (% style="color:blue" %)**Overview：**(%%) ====
291 291  
292 292  
293 -(((
294 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
366 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
295 295  
296 -* Send real-time location information of mobile phone to LoRaWAN network.
297 -* Check LoRaWAN network signal strengh.
298 -* Manually send messages to LoRaWAN network.
299 -)))
368 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
300 300  
301 301  
371 +[[image:image-20220602161935-10.png||height="498" width="800"]]
302 302  
303 303  
304 304  
305 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
375 +(% style="color:blue" %)**3. See Uplink Command**
306 306  
377 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
307 307  
308 -A USB to Type-C adapter is needed to connect to a Mobile phone.
379 +example: AT+SENDB=01,02,8,05820802581ea0a5
309 309  
310 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
381 +[[image:image-20220602162157-11.png||height="497" width="800"]]
311 311  
312 -[[image:image-20220813174353-2.png||height="360" width="313"]]
313 313  
314 314  
385 +(% style="color:blue" %)**4. Check to see if TTN received the message**
315 315  
387 +[[image:image-20220602162331-12.png||height="420" width="800"]]
316 316  
317 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
318 318  
319 319  
320 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
391 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
321 321  
322 322  
323 -[[image:image-20220813173738-1.png]]
394 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
324 324  
325 325  
397 +(% style="color:red" %)**Preconditions:**
326 326  
399 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
327 327  
328 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
401 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
329 329  
330 330  
331 -Function and page introduction
332 332  
405 +(% style="color:blue" %)**Steps for usage:**
333 333  
334 -[[image:image-20220723113448-7.png||height="995" width="450"]]
407 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
335 335  
409 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
336 336  
337 -**Block Explain:**
411 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
338 338  
339 -1.  Display LA66 USB LoRaWAN Module connection status
340 340  
341 -2.  Check and reconnect
342 342  
343 -3.  Turn send timestamps on or off
415 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
344 344  
345 -4.  Display LoRaWan connection status
346 346  
347 -5.  Check LoRaWan connection status
418 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
348 348  
349 -6.  The RSSI value of the node when the ACK is received
350 350  
351 -7.  Node's Signal Strength Icon
421 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
352 352  
353 -8.  Configure Location Uplink Interval
423 +[[image:image-20220602171233-2.png||height="538" width="800"]]
354 354  
355 -9.  AT command input box
356 356  
357 -10.  Send Button:  Send input box info to LA66 USB Adapter
358 358  
359 -11.  Output Log from LA66 USB adapter
427 +(% style="color:blue" %)**2. Install Minicom in RPi.**
360 360  
361 -12.  clear log button
429 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
362 362  
363 -13.  exit button
431 + (% style="background-color:yellow" %)**apt update**
364 364  
433 + (% style="background-color:yellow" %)**apt install minicom**
365 365  
366 366  
367 -LA66 USB LoRaWAN Module not connected
436 +Use minicom to connect to the RPI's terminal
368 368  
438 +[[image:image-20220602153146-3.png||height="439" width="500"]]
369 369  
370 -[[image:image-20220723110520-5.png||height="677" width="508"]]
371 371  
372 372  
442 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
373 373  
374 -Connect LA66 USB LoRaWAN Module
444 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
375 375  
376 376  
377 -[[image:image-20220723110626-6.png||height="681" width="511"]]
447 +[[image:image-20220602154928-5.png||height="436" width="500"]]
378 378  
379 379  
380 380  
451 +(% style="color:blue" %)**4. Send Uplink message**
381 381  
382 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
453 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
383 383  
455 +example: AT+SENDB=01,02,8,05820802581ea0a5
384 384  
385 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
386 386  
458 +[[image:image-20220602160339-6.png||height="517" width="600"]]
387 387  
388 -[[image:image-20220723134549-8.png]]
389 389  
390 390  
462 +Check to see if TTN received the message
391 391  
392 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
464 +[[image:image-20220602160627-7.png||height="369" width="800"]]
393 393  
394 394  
395 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
396 396  
397 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
468 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
398 398  
399 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
400 400  
401 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
402 402  
472 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
403 403  
404 -Example output in NodeRed is as below:
405 405  
406 -[[image:image-20220723144339-1.png]]
407 407  
408 408  
477 += 4.  Order Info =
409 409  
410 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
411 411  
480 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
412 412  
413 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
414 414  
415 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
416 -
417 -
418 -[[image:image-20220723150132-2.png]]
419 -
420 -
421 -
422 -= 2.  FAQ =
423 -
424 -
425 -== 2.1  How to Compile Source Code for LA66? ==
426 -
427 -
428 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
429 -
430 -
431 -
432 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
433 -
434 -
435 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
436 -
437 -
438 -
439 -= 3.  Order Info =
440 -
441 -
442 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
443 -
444 -
445 445  (% style="color:blue" %)**XXX**(%%): The default frequency band
446 446  
447 447  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -454,37 +454,7 @@
454 454  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
455 455  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
456 456  
495 += 5.  Reference =
457 457  
458 -= 4.  Reference =
497 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
459 459  
460 -
461 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
462 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
463 -
464 -
465 -= 5.  FCC Statement =
466 -
467 -
468 -(% style="color:red" %)**FCC Caution:**
469 -
470 -Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
471 -
472 -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
473 -
474 -
475 -(% style="color:red" %)**IMPORTANT NOTE: **
476 -
477 -(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
478 -
479 -—Reorient or relocate the receiving antenna.
480 -
481 -—Increase the separation between the equipment and receiver.
482 -
483 -—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
484 -
485 -—Consult the dealer or an experienced radio/TV technician for help.
486 -
487 -
488 -(% style="color:red" %)**FCC Radiation Exposure Statement: **
489 -
490 -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content