Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 157.3
edited by Xiaoling
on 2022/09/26 14:38
Change comment: There is no comment for this version
To version 98.2
edited by Xiaoling
on 2022/07/18 09:56
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -6,23 +6,20 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
15 -
16 -
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 20  (((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
16 +[[image:image-20220715000242-1.png||height="110" width="132"]]
17 +
18 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
22 22  )))
23 23  
24 24  (((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
22 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 26  )))
27 27  
28 28  (((
... ... @@ -38,31 +38,25 @@
38 38  )))
39 39  
40 40  
41 -
42 42  == 1.2  Features ==
43 43  
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
43 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
48 +* Ultra-long RF range
56 56  
57 -
58 -
59 59  == 1.3  Specification ==
60 60  
61 -
62 62  * CPU: 32-bit 48 MHz
63 63  * Flash: 256KB
64 64  * RAM: 64KB
65 -* Input Power Range: 5v
55 +* Input Power Range: 1.8v ~~ 3.7v
56 +* Power Consumption: < 4uA.
66 66  * Frequency Range: 150 MHz ~~ 960 MHz
67 67  * Maximum Power +22 dBm constant RF output
68 68  * High sensitivity: -148 dBm
... ... @@ -74,374 +74,418 @@
74 74  ** Operating: 10 ~~ 95% (Non-Condensing)
75 75  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
76 76  * LoRa Rx current: <9 mA
68 +* I/O Voltage: 3.3v
77 77  
78 78  
79 79  
80 -== 1.4  Pin Mapping & LED ==
81 81  
73 +== 1.4  AT Command ==
82 82  
83 -[[image:image-20220813183239-3.png||height="526" width="662"]]
84 84  
76 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
85 85  
86 86  
87 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
79 +== 1.5  Dimension ==
88 88  
81 +[[image:image-20220718094750-3.png]]
89 89  
90 -(((
91 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
92 -)))
93 93  
94 94  
95 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
96 96  
86 +== 1.6  Pin Mapping ==
97 97  
98 -[[image:image-20220723100027-1.png]]
99 99  
89 +[[image:image-20220523101537-1.png]]
100 100  
101 -Open the serial port tool
102 102  
103 -[[image:image-20220602161617-8.png]]
104 104  
93 +== 1.7  Land Pattern ==
105 105  
106 -[[image:image-20220602161718-9.png||height="457" width="800"]]
95 +[[image:image-20220517072821-2.png]]
107 107  
108 108  
109 109  
110 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
99 += 2.  LA66 LoRaWAN Shield =
111 111  
112 112  
113 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
102 +== 2.1  Overview ==
114 114  
115 115  
116 -[[image:image-20220602161935-10.png||height="498" width="800"]]
105 +[[image:image-20220715000826-2.png||height="386" width="449"]]
117 117  
118 118  
108 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
119 119  
120 -(% style="color:blue" %)**3.  See Uplink Command**
110 +(((
111 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
112 +)))
121 121  
114 +(((
115 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
116 +)))
122 122  
123 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
118 +(((
119 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
120 +)))
124 124  
125 -example: AT+SENDB=01,02,8,05820802581ea0a5
122 +(((
123 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
124 +)))
126 126  
127 -[[image:image-20220602162157-11.png||height="497" width="800"]]
128 128  
127 +== 2.2  Features ==
129 129  
129 +* Arduino Shield base on LA66 LoRaWAN module
130 +* Support LoRaWAN v1.0.4 protocol
131 +* Support peer-to-peer protocol
132 +* TCXO crystal to ensure RF performance on low temperature
133 +* SMA connector
134 +* Available in different frequency LoRaWAN frequency bands.
135 +* World-wide unique OTAA keys.
136 +* AT Command via UART-TTL interface
137 +* Firmware upgradable via UART interface
138 +* Ultra-long RF range
130 130  
131 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
140 +== 2.3  Specification ==
132 132  
142 +* CPU: 32-bit 48 MHz
143 +* Flash: 256KB
144 +* RAM: 64KB
145 +* Input Power Range: 1.8v ~~ 3.7v
146 +* Power Consumption: < 4uA.
147 +* Frequency Range: 150 MHz ~~ 960 MHz
148 +* Maximum Power +22 dBm constant RF output
149 +* High sensitivity: -148 dBm
150 +* Temperature:
151 +** Storage: -55 ~~ +125℃
152 +** Operating: -40 ~~ +85℃
153 +* Humidity:
154 +** Storage: 5 ~~ 95% (Non-Condensing)
155 +** Operating: 10 ~~ 95% (Non-Condensing)
156 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
157 +* LoRa Rx current: <9 mA
158 +* I/O Voltage: 3.3v
133 133  
134 -[[image:image-20220817093644-1.png]]
160 +== 2.4  Pin Mapping & LED ==
135 135  
136 136  
137 137  
138 -== 1.6  Example: How to join helium ==
164 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
139 139  
140 140  
141 141  
142 -(% style="color:blue" %)**1.  Create a new device.**
168 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
143 143  
144 144  
145 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
146 146  
172 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
147 147  
148 148  
149 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
150 150  
176 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
151 151  
152 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
153 153  
179 +=== 2.8.1  Items needed for update ===
154 154  
181 +1. LA66 LoRaWAN Shield
182 +1. Arduino
183 +1. USB TO TTL Adapter
155 155  
156 -(% style="color:blue" %)**3.  Use AT commands.**
185 +[[image:image-20220602100052-2.png||height="385" width="600"]]
157 157  
158 158  
159 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
188 +=== 2.8.2  Connection ===
160 160  
161 161  
191 +[[image:image-20220602101311-3.png||height="276" width="600"]]
162 162  
163 -(% style="color:blue" %)**4.  Use the serial port tool**
164 164  
194 +(((
195 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
196 +)))
165 165  
166 -[[image:image-20220909151517-2.png||height="543" width="708"]]
198 +(((
199 +(% style="background-color:yellow" %)**GND  <-> GND
200 +TXD  <->  TXD
201 +RXD  <->  RXD**
202 +)))
167 167  
168 168  
205 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
169 169  
170 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
207 +Connect USB TTL Adapter to PC after connecting the wires
171 171  
172 172  
173 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
210 +[[image:image-20220602102240-4.png||height="304" width="600"]]
174 174  
175 175  
213 +=== 2.8.3  Upgrade steps ===
176 176  
177 -(% style="color:blue" %)**6.  Network successfully.**
178 178  
216 +==== 1.  Switch SW1 to put in ISP position ====
179 179  
180 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
181 181  
219 +[[image:image-20220602102824-5.png||height="306" width="600"]]
182 182  
183 183  
184 -(% style="color:blue" %)**7.  Send uplink using command**
185 185  
223 +==== 2.  Press the RST switch once ====
186 186  
187 -[[image:image-20220912085244-1.png]]
188 188  
226 +[[image:image-20220602104701-12.png||height="285" width="600"]]
189 189  
190 -[[image:image-20220912085307-2.png]]
191 191  
192 192  
230 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
193 193  
194 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
195 195  
233 +(((
234 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
235 +)))
196 196  
197 197  
198 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
238 +[[image:image-20220602103227-6.png]]
199 199  
200 200  
201 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
241 +[[image:image-20220602103357-7.png]]
202 202  
203 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
204 204  
205 205  
206 -(% style="color:red" %)**Preconditions:**
245 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
246 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
207 207  
208 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
209 209  
210 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
249 +[[image:image-20220602103844-8.png]]
211 211  
212 212  
213 213  
214 -(% style="color:blue" %)**Steps for usage:**
253 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
254 +(% style="color:blue" %)**3. Select the bin file to burn**
215 215  
216 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
217 217  
218 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
257 +[[image:image-20220602104144-9.png]]
219 219  
220 220  
221 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
260 +[[image:image-20220602104251-10.png]]
222 222  
223 223  
263 +[[image:image-20220602104402-11.png]]
224 224  
225 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
226 226  
227 227  
228 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
267 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
268 +(% style="color:blue" %)**4. Click to start the download**
229 229  
270 +[[image:image-20220602104923-13.png]]
230 230  
231 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
232 232  
233 233  
234 -[[image:image-20220723100439-2.png]]
274 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
275 +(% style="color:blue" %)**5. Check update process**
235 235  
236 236  
278 +[[image:image-20220602104948-14.png]]
237 237  
238 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
239 239  
240 240  
241 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
282 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
283 +(% style="color:blue" %)**The following picture shows that the burning is successful**
242 242  
243 - (% style="background-color:yellow" %)**apt update**
285 +[[image:image-20220602105251-15.png]]
244 244  
245 - (% style="background-color:yellow" %)**apt install minicom**
246 246  
247 247  
248 -Use minicom to connect to the RPI's terminal
289 += 3.  LA66 USB LoRaWAN Adapter =
249 249  
250 -[[image:image-20220602153146-3.png||height="439" width="500"]]
251 251  
292 +== 3.1  Overview ==
252 252  
294 +[[image:image-20220715001142-3.png||height="145" width="220"]]
253 253  
254 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
296 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
255 255  
298 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
256 256  
257 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
300 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
258 258  
302 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
259 259  
260 -[[image:image-20220602154928-5.png||height="436" width="500"]]
304 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
261 261  
262 262  
307 +== 3.2  Features ==
263 263  
264 -(% style="color:blue" %)**4.  Send Uplink message**
309 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
310 +* Ultra-long RF range
311 +* Support LoRaWAN v1.0.4 protocol
312 +* Support peer-to-peer protocol
313 +* TCXO crystal to ensure RF performance on low temperature
314 +* Spring RF antenna
315 +* Available in different frequency LoRaWAN frequency bands.
316 +* World-wide unique OTAA keys.
317 +* AT Command via UART-TTL interface
318 +* Firmware upgradable via UART interface
319 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
265 265  
321 +== 3.3  Specification ==
266 266  
267 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
323 +* CPU: 32-bit 48 MHz
324 +* Flash: 256KB
325 +* RAM: 64KB
326 +* Input Power Range: 5v
327 +* Frequency Range: 150 MHz ~~ 960 MHz
328 +* Maximum Power +22 dBm constant RF output
329 +* High sensitivity: -148 dBm
330 +* Temperature:
331 +** Storage: -55 ~~ +125℃
332 +** Operating: -40 ~~ +85℃
333 +* Humidity:
334 +** Storage: 5 ~~ 95% (Non-Condensing)
335 +** Operating: 10 ~~ 95% (Non-Condensing)
336 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
337 +* LoRa Rx current: <9 mA
268 268  
269 -example: AT+SENDB=01,02,8,05820802581ea0a5
339 +== 3.4  Pin Mapping & LED ==
270 270  
271 271  
272 -[[image:image-20220602160339-6.png||height="517" width="600"]]
273 273  
343 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
274 274  
275 275  
276 -Check to see if TTN received the message
346 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
277 277  
278 278  
279 -[[image:image-20220602160627-7.png||height="369" width="800"]]
349 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
280 280  
281 281  
352 +[[image:image-20220602171217-1.png||height="538" width="800"]]
282 282  
283 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
284 284  
355 +Open the serial port tool
285 285  
286 -=== 1.9.1  Hardware and Software Connection ===
357 +[[image:image-20220602161617-8.png]]
287 287  
359 +[[image:image-20220602161718-9.png||height="457" width="800"]]
288 288  
289 289  
290 -==== (% style="color:blue" %)**Overview：**(%%) ====
291 291  
363 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
292 292  
293 -(((
294 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
365 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
295 295  
296 -* Send real-time location information of mobile phone to LoRaWAN network.
297 -* Check LoRaWAN network signal strengh.
298 -* Manually send messages to LoRaWAN network.
299 -)))
300 300  
368 +[[image:image-20220602161935-10.png||height="498" width="800"]]
301 301  
302 302  
303 303  
372 +(% style="color:blue" %)**3. See Uplink Command**
304 304  
305 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
374 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
306 306  
376 +example: AT+SENDB=01,02,8,05820802581ea0a5
307 307  
308 -A USB to Type-C adapter is needed to connect to a Mobile phone.
378 +[[image:image-20220602162157-11.png||height="497" width="800"]]
309 309  
310 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
311 311  
312 -[[image:image-20220813174353-2.png||height="360" width="313"]]
313 313  
382 +(% style="color:blue" %)**4. Check to see if TTN received the message**
314 314  
384 +[[image:image-20220602162331-12.png||height="420" width="800"]]
315 315  
316 316  
317 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
318 318  
388 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
319 319  
320 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
321 321  
391 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
322 322  
323 -[[image:image-20220813173738-1.png]]
324 324  
394 +(% style="color:red" %)**Preconditions:**
325 325  
396 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
326 326  
398 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
327 327  
328 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
329 329  
330 330  
331 -Function and page introduction
402 +(% style="color:blue" %)**Steps for usage:**
332 332  
404 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
333 333  
334 -[[image:image-20220723113448-7.png||height="995" width="450"]]
406 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
335 335  
408 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
336 336  
337 -**Block Explain:**
338 338  
339 -1.  Display LA66 USB LoRaWAN Module connection status
340 340  
341 -2.  Check and reconnect
412 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
342 342  
343 -3.  Turn send timestamps on or off
344 344  
345 -4.  Display LoRaWan connection status
415 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
346 346  
347 -5.  Check LoRaWan connection status
348 348  
349 -6.  The RSSI value of the node when the ACK is received
418 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
350 350  
351 -7.  Node's Signal Strength Icon
420 +[[image:image-20220602171233-2.png||height="538" width="800"]]
352 352  
353 -8.  Configure Location Uplink Interval
354 354  
355 -9.  AT command input box
356 356  
357 -10.  Send Button:  Send input box info to LA66 USB Adapter
424 +(% style="color:blue" %)**2. Install Minicom in RPi.**
358 358  
359 -11.  Output Log from LA66 USB adapter
426 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
360 360  
361 -12.  clear log button
428 + (% style="background-color:yellow" %)**apt update**
362 362  
363 -13.  exit button
430 + (% style="background-color:yellow" %)**apt install minicom**
364 364  
365 365  
433 +Use minicom to connect to the RPI's terminal
366 366  
367 -LA66 USB LoRaWAN Module not connected
435 +[[image:image-20220602153146-3.png||height="439" width="500"]]
368 368  
369 369  
370 -[[image:image-20220723110520-5.png||height="677" width="508"]]
371 371  
439 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
372 372  
441 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
373 373  
374 -Connect LA66 USB LoRaWAN Module
375 375  
444 +[[image:image-20220602154928-5.png||height="436" width="500"]]
376 376  
377 -[[image:image-20220723110626-6.png||height="681" width="511"]]
378 378  
379 379  
448 +(% style="color:blue" %)**4. Send Uplink message**
380 380  
450 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
381 381  
382 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
452 +example: AT+SENDB=01,02,8,05820802581ea0a5
383 383  
384 384  
385 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
455 +[[image:image-20220602160339-6.png||height="517" width="600"]]
386 386  
387 387  
388 -[[image:image-20220723134549-8.png]]
389 389  
459 +Check to see if TTN received the message
390 390  
461 +[[image:image-20220602160627-7.png||height="369" width="800"]]
391 391  
392 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
393 393  
394 394  
395 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
465 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
396 396  
397 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
398 398  
399 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
400 400  
401 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
469 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
402 402  
403 403  
404 -Example output in NodeRed is as below:
405 405  
406 -[[image:image-20220723144339-1.png]]
407 407  
474 += 4.  Order Info =
408 408  
409 409  
410 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
477 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
411 411  
412 412  
413 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
414 -
415 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
416 -
417 -
418 -[[image:image-20220723150132-2.png]]
419 -
420 -
421 -
422 -= 2.  FAQ =
423 -
424 -
425 -== 2.1  How to Compile Source Code for LA66? ==
426 -
427 -
428 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
429 -
430 -
431 -
432 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
433 -
434 -
435 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
436 -
437 -
438 -
439 -= 3.  Order Info =
440 -
441 -
442 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
443 -
444 -
445 445  (% style="color:blue" %)**XXX**(%%): The default frequency band
446 446  
447 447  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -454,12 +454,8 @@
454 454  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
455 455  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
456 456  
492 += 5.  Reference =
457 457  
494 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
458 458  
459 -= 4.  Reference =
460 -
461 -
462 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
463 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
464 -
465 465  
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content