Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 157.3
edited by Xiaoling
on 2022/09/26 14:38
Change comment: There is no comment for this version
To version 87.10
edited by Xiaoling
on 2022/07/13 10:03
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -1,68 +1,47 @@
1 1  
2 2  
3 -**Table of Contents:**
4 -
5 5  {{toc/}}
6 6  
7 7  
8 8  
7 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
10 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
13 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
15 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 16  
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 -(((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 -)))
27 -
28 -(((
29 29  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 -)))
31 31  
32 -(((
33 33  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 -)))
35 35  
36 -(((
37 37  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 -)))
39 39  
40 40  
41 -
42 42  == 1.2  Features ==
43 43  
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
29 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
34 +* Ultra-long RF range
56 56  
57 57  
58 58  
59 59  == 1.3  Specification ==
60 60  
61 -
62 62  * CPU: 32-bit 48 MHz
63 63  * Flash: 256KB
64 64  * RAM: 64KB
65 -* Input Power Range: 5v
43 +* Input Power Range: 1.8v ~~ 3.7v
44 +* Power Consumption: < 4uA.
66 66  * Frequency Range: 150 MHz ~~ 960 MHz
67 67  * Maximum Power +22 dBm constant RF output
68 68  * High sensitivity: -148 dBm
... ... @@ -74,374 +74,384 @@
74 74  ** Operating: 10 ~~ 95% (Non-Condensing)
75 75  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
76 76  * LoRa Rx current: <9 mA
56 +* I/O Voltage: 3.3v
77 77  
78 78  
79 79  
80 -== 1.4  Pin Mapping & LED ==
60 +== 1.4  AT Command ==
81 81  
62 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
82 82  
83 -[[image:image-20220813183239-3.png||height="526" width="662"]]
84 84  
65 +== 1.5  Dimension ==
85 85  
67 +[[image:image-20220517072526-1.png]]
86 86  
87 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
88 88  
89 89  
90 -(((
91 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
92 -)))
71 +== 1.6  Pin Mapping ==
93 93  
94 94  
95 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
74 +[[image:image-20220523101537-1.png]]
96 96  
97 97  
98 -[[image:image-20220723100027-1.png]]
99 99  
78 +== 1.7  Land Pattern ==
100 100  
101 -Open the serial port tool
80 +[[image:image-20220517072821-2.png]]
102 102  
103 -[[image:image-20220602161617-8.png]]
104 104  
105 105  
106 -[[image:image-20220602161718-9.png||height="457" width="800"]]
84 += 2.  LA66 LoRaWAN Shield =
107 107  
108 108  
87 +== 2.1  Overview ==
109 109  
110 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
89 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
111 111  
112 112  
113 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
92 +== 2.2  Features ==
114 114  
94 +* Arduino Shield base on LA66 LoRaWAN module
95 +* Support LoRaWAN v1.0.4 protocol
96 +* Support peer-to-peer protocol
97 +* TCXO crystal to ensure RF performance on low temperature
98 +* SMA connector
99 +* Available in different frequency LoRaWAN frequency bands.
100 +* World-wide unique OTAA keys.
101 +* AT Command via UART-TTL interface
102 +* Firmware upgradable via UART interface
103 +* Ultra-long RF range
115 115  
116 -[[image:image-20220602161935-10.png||height="498" width="800"]]
117 117  
118 118  
107 +== 2.3  Specification ==
119 119  
120 -(% style="color:blue" %)**3.  See Uplink Command**
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
121 121  
122 122  
123 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
124 124  
125 -example: AT+SENDB=01,02,8,05820802581ea0a5
129 +== 2.4  Pin Mapping & LED ==
126 126  
127 -[[image:image-20220602162157-11.png||height="497" width="800"]]
128 128  
129 129  
133 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
130 130  
131 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
132 132  
133 133  
134 -[[image:image-20220817093644-1.png]]
137 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
135 135  
136 136  
137 137  
138 -== 1.6  Example: How to join helium ==
141 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
139 139  
140 140  
141 141  
142 -(% style="color:blue" %)**1.  Create a new device.**
145 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
143 143  
144 144  
145 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
148 +=== 2.8.1  Items needed for update ===
146 146  
150 +1. LA66 LoRaWAN Shield
151 +1. Arduino
152 +1. USB TO TTL Adapter
147 147  
154 +[[image:image-20220602100052-2.png||height="385" width="600"]]
148 148  
149 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
150 150  
157 +=== 2.8.2  Connection ===
151 151  
152 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
153 153  
160 +[[image:image-20220602101311-3.png||height="276" width="600"]]
154 154  
155 155  
156 -(% style="color:blue" %)**3.  Use AT commands.**
163 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
157 157  
165 +(% style="background-color:yellow" %)**GND  <-> GND
166 +TXD  <->  TXD
167 +RXD  <->  RXD**
158 158  
159 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
160 160  
170 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
161 161  
172 +Connect USB TTL Adapter to PC after connecting the wires
162 162  
163 -(% style="color:blue" %)**4.  Use the serial port tool**
164 164  
175 +[[image:image-20220602102240-4.png||height="304" width="600"]]
165 165  
166 -[[image:image-20220909151517-2.png||height="543" width="708"]]
167 167  
178 +=== 2.8.3  Upgrade steps ===
168 168  
169 169  
170 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
181 +==== 1.  Switch SW1 to put in ISP position ====
171 171  
172 172  
173 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
184 +[[image:image-20220602102824-5.png||height="306" width="600"]]
174 174  
175 175  
176 176  
177 -(% style="color:blue" %)**6.  Network successfully.**
188 +==== 2.  Press the RST switch once ====
178 178  
179 179  
180 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
191 +[[image:image-20220602104701-12.png||height="285" width="600"]]
181 181  
182 182  
183 183  
184 -(% style="color:blue" %)**7.  Send uplink using command**
195 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
185 185  
186 186  
187 -[[image:image-20220912085244-1.png]]
198 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
188 188  
189 189  
190 -[[image:image-20220912085307-2.png]]
201 +[[image:image-20220602103227-6.png]]
191 191  
192 192  
204 +[[image:image-20220602103357-7.png]]
193 193  
194 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
195 195  
196 196  
208 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
209 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
197 197  
198 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
199 199  
212 +[[image:image-20220602103844-8.png]]
200 200  
201 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
202 202  
203 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
204 204  
216 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
217 +(% style="color:blue" %)**3. Select the bin file to burn**
205 205  
206 -(% style="color:red" %)**Preconditions:**
207 207  
208 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
220 +[[image:image-20220602104144-9.png]]
209 209  
210 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
211 211  
223 +[[image:image-20220602104251-10.png]]
212 212  
213 213  
214 -(% style="color:blue" %)**Steps for usage:**
226 +[[image:image-20220602104402-11.png]]
215 215  
216 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
217 217  
218 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
219 219  
230 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
231 +(% style="color:blue" %)**4. Click to start the download**
220 220  
221 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
233 +[[image:image-20220602104923-13.png]]
222 222  
223 223  
224 224  
225 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
237 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
238 +(% style="color:blue" %)**5. Check update process**
226 226  
227 227  
228 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
241 +[[image:image-20220602104948-14.png]]
229 229  
230 230  
231 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
232 232  
245 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
246 +(% style="color:blue" %)**The following picture shows that the burning is successful**
233 233  
234 -[[image:image-20220723100439-2.png]]
248 +[[image:image-20220602105251-15.png]]
235 235  
236 236  
237 237  
238 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
252 += 3.  LA66 USB LoRaWAN Adapter =
239 239  
240 240  
241 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
255 +== 3.1  Overview ==
242 242  
243 - (% style="background-color:yellow" %)**apt update**
257 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
244 244  
245 - (% style="background-color:yellow" %)**apt install minicom**
246 246  
260 +== 3.2  Features ==
247 247  
248 -Use minicom to connect to the RPI's terminal
262 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
263 +* Ultra-long RF range
264 +* Support LoRaWAN v1.0.4 protocol
265 +* Support peer-to-peer protocol
266 +* TCXO crystal to ensure RF performance on low temperature
267 +* Spring RF antenna
268 +* Available in different frequency LoRaWAN frequency bands.
269 +* World-wide unique OTAA keys.
270 +* AT Command via UART-TTL interface
271 +* Firmware upgradable via UART interface
249 249  
250 -[[image:image-20220602153146-3.png||height="439" width="500"]]
251 251  
252 252  
275 +== 3.3  Specification ==
253 253  
254 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
277 +* CPU: 32-bit 48 MHz
278 +* Flash: 256KB
279 +* RAM: 64KB
280 +* Input Power Range: 5v
281 +* Frequency Range: 150 MHz ~~ 960 MHz
282 +* Maximum Power +22 dBm constant RF output
283 +* High sensitivity: -148 dBm
284 +* Temperature:
285 +** Storage: -55 ~~ +125℃
286 +** Operating: -40 ~~ +85℃
287 +* Humidity:
288 +** Storage: 5 ~~ 95% (Non-Condensing)
289 +** Operating: 10 ~~ 95% (Non-Condensing)
290 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
291 +* LoRa Rx current: <9 mA
255 255  
256 256  
257 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
258 258  
295 +== 3.4  Pin Mapping & LED ==
259 259  
260 -[[image:image-20220602154928-5.png||height="436" width="500"]]
261 261  
262 262  
299 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
263 263  
264 -(% style="color:blue" %)**4.  Send Uplink message**
265 265  
302 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
266 266  
267 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
268 268  
269 -example: AT+SENDB=01,02,8,05820802581ea0a5
305 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
270 270  
271 271  
272 -[[image:image-20220602160339-6.png||height="517" width="600"]]
308 +[[image:image-20220602171217-1.png||height="538" width="800"]]
273 273  
274 274  
311 +Open the serial port tool
275 275  
276 -Check to see if TTN received the message
313 +[[image:image-20220602161617-8.png]]
277 277  
315 +[[image:image-20220602161718-9.png||height="457" width="800"]]
278 278  
279 -[[image:image-20220602160627-7.png||height="369" width="800"]]
280 280  
281 281  
319 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
282 282  
283 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
321 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
284 284  
285 285  
286 -=== 1.9.1  Hardware and Software Connection ===
324 +[[image:image-20220602161935-10.png||height="498" width="800"]]
287 287  
288 288  
289 289  
290 -==== (% style="color:blue" %)**Overview：**(%%) ====
328 +(% style="color:blue" %)**3. See Uplink Command**
291 291  
330 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
292 292  
293 -(((
294 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
332 +example: AT+SENDB=01,02,8,05820802581ea0a5
295 295  
296 -* Send real-time location information of mobile phone to LoRaWAN network.
297 -* Check LoRaWAN network signal strengh.
298 -* Manually send messages to LoRaWAN network.
299 -)))
334 +[[image:image-20220602162157-11.png||height="497" width="800"]]
300 300  
301 301  
302 302  
338 +(% style="color:blue" %)**4. Check to see if TTN received the message**
303 303  
340 +[[image:image-20220602162331-12.png||height="420" width="800"]]
304 304  
305 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
306 306  
307 307  
308 -A USB to Type-C adapter is needed to connect to a Mobile phone.
344 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
309 309  
310 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
311 311  
312 -[[image:image-20220813174353-2.png||height="360" width="313"]]
347 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
313 313  
314 314  
350 +(% style="color:red" %)**Preconditions:**
315 315  
352 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
316 316  
317 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
354 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
318 318  
319 319  
320 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
321 321  
358 +(% style="color:blue" %)**Steps for usage:**
322 322  
323 -[[image:image-20220813173738-1.png]]
360 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
324 324  
362 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
325 325  
364 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
326 326  
327 327  
328 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
329 329  
368 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
330 330  
331 -Function and page introduction
332 332  
371 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
333 333  
334 -[[image:image-20220723113448-7.png||height="995" width="450"]]
335 335  
374 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
336 336  
337 -**Block Explain:**
376 +[[image:image-20220602171233-2.png||height="538" width="800"]]
338 338  
339 -1.  Display LA66 USB LoRaWAN Module connection status
340 340  
341 -2.  Check and reconnect
342 342  
343 -3.  Turn send timestamps on or off
380 +(% style="color:blue" %)**2. Install Minicom in RPi.**
344 344  
345 -4.  Display LoRaWan connection status
382 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
346 346  
347 -5.  Check LoRaWan connection status
384 + (% style="background-color:yellow" %)**apt update**
348 348  
349 -6.  The RSSI value of the node when the ACK is received
386 + (% style="background-color:yellow" %)**apt install minicom**
350 350  
351 -7.  Node's Signal Strength Icon
352 352  
353 -8.  Configure Location Uplink Interval
389 +Use minicom to connect to the RPI's terminal
354 354  
355 -9.  AT command input box
391 +[[image:image-20220602153146-3.png||height="439" width="500"]]
356 356  
357 -10.  Send Button:  Send input box info to LA66 USB Adapter
358 358  
359 -11.  Output Log from LA66 USB adapter
360 360  
361 -12.  clear log button
395 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
396 +(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
362 362  
363 -13.  exit button
398 +[[image:image-20220602154928-5.png||height="436" width="500"]]
364 364  
365 365  
366 366  
367 -LA66 USB LoRaWAN Module not connected
402 +(% style="color:blue" %)**4. Send Uplink message**
368 368  
404 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
369 369  
370 -[[image:image-20220723110520-5.png||height="677" width="508"]]
406 +example: AT+SENDB=01,02,8,05820802581ea0a5
371 371  
372 372  
409 +[[image:image-20220602160339-6.png||height="517" width="600"]]
373 373  
374 -Connect LA66 USB LoRaWAN Module
375 375  
376 376  
377 -[[image:image-20220723110626-6.png||height="681" width="511"]]
413 +Check to see if TTN received the message
378 378  
415 +[[image:image-20220602160627-7.png||height="369" width="800"]]
379 379  
380 380  
381 381  
382 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
419 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
383 383  
384 384  
385 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
386 386  
423 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
387 387  
388 -[[image:image-20220723134549-8.png]]
389 389  
390 390  
391 391  
392 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
428 += 4.  Order Info =
393 393  
394 394  
395 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
431 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
396 396  
397 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
398 398  
399 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
400 -
401 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
402 -
403 -
404 -Example output in NodeRed is as below:
405 -
406 -[[image:image-20220723144339-1.png]]
407 -
408 -
409 -
410 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
411 -
412 -
413 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
414 -
415 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
416 -
417 -
418 -[[image:image-20220723150132-2.png]]
419 -
420 -
421 -
422 -= 2.  FAQ =
423 -
424 -
425 -== 2.1  How to Compile Source Code for LA66? ==
426 -
427 -
428 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
429 -
430 -
431 -
432 -== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
433 -
434 -
435 -Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
436 -
437 -
438 -
439 -= 3.  Order Info =
440 -
441 -
442 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
443 -
444 -
445 445  (% style="color:blue" %)**XXX**(%%): The default frequency band
446 446  
447 447  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -456,10 +456,9 @@
456 456  
457 457  
458 458  
459 -= 4.  Reference =
460 460  
449 += 5.  Reference =
461 461  
462 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
463 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
451 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
464 464  
465 465  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content