Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 157.2
edited by Xiaoling
on 2022/09/12 08:57
Change comment: There is no comment for this version
To version 87.9
edited by Xiaoling
on 2022/07/13 10:02
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -1,69 +1,47 @@
1 1  
2 2  
3 -**Table of Contents:**
4 -
5 5  {{toc/}}
6 6  
7 7  
8 8  
7 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
10 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
13 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
15 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 16  
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 -(((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 -)))
27 -
28 -(((
29 29  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 -)))
31 31  
32 -(((
33 33  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 -)))
35 35  
36 -(((
37 37  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 -)))
39 39  
40 40  
41 -
42 42  == 1.2  Features ==
43 43  
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
29 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
34 +* Ultra-long RF range
56 56  
57 57  
58 58  
59 -
60 60  == 1.3  Specification ==
61 61  
62 -
63 63  * CPU: 32-bit 48 MHz
64 64  * Flash: 256KB
65 65  * RAM: 64KB
66 -* Input Power Range: 5v
43 +* Input Power Range: 1.8v ~~ 3.7v
44 +* Power Consumption: < 4uA.
67 67  * Frequency Range: 150 MHz ~~ 960 MHz
68 68  * Maximum Power +22 dBm constant RF output
69 69  * High sensitivity: -148 dBm
... ... @@ -75,368 +75,378 @@
75 75  ** Operating: 10 ~~ 95% (Non-Condensing)
76 76  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
77 77  * LoRa Rx current: <9 mA
56 +* I/O Voltage: 3.3v
78 78  
79 79  
80 80  
60 +== 1.4  AT Command ==
81 81  
82 -== 1.4  Pin Mapping & LED ==
62 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
83 83  
84 84  
85 -[[image:image-20220813183239-3.png||height="526" width="662"]]
65 +== 1.5  Dimension ==
86 86  
67 +[[image:image-20220517072526-1.png]]
87 87  
88 88  
89 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
90 90  
71 +== 1.6  Pin Mapping ==
91 91  
92 -(((
93 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
94 -)))
95 95  
74 +[[image:image-20220523101537-1.png]]
96 96  
97 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
98 98  
99 99  
100 -[[image:image-20220723100027-1.png]]
78 +== 1.7  Land Pattern ==
101 101  
80 +[[image:image-20220517072821-2.png]]
102 102  
103 -Open the serial port tool
104 104  
105 -[[image:image-20220602161617-8.png]]
106 106  
84 += 2.  LA66 LoRaWAN Shield =
107 107  
108 -[[image:image-20220602161718-9.png||height="457" width="800"]]
109 109  
87 +== 2.1  Overview ==
110 110  
89 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
111 111  
112 -(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
113 113  
92 +== 2.2  Features ==
114 114  
115 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
94 +* Arduino Shield base on LA66 LoRaWAN module
95 +* Support LoRaWAN v1.0.4 protocol
96 +* Support peer-to-peer protocol
97 +* TCXO crystal to ensure RF performance on low temperature
98 +* SMA connector
99 +* Available in different frequency LoRaWAN frequency bands.
100 +* World-wide unique OTAA keys.
101 +* AT Command via UART-TTL interface
102 +* Firmware upgradable via UART interface
103 +* Ultra-long RF range
116 116  
117 117  
118 -[[image:image-20220602161935-10.png||height="498" width="800"]]
119 119  
107 +== 2.3  Specification ==
120 120  
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
121 121  
122 -(% style="color:blue" %)**3.  See Uplink Command**
123 123  
124 124  
125 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
129 +== 2.4  Pin Mapping & LED ==
126 126  
127 -example: AT+SENDB=01,02,8,05820802581ea0a5
128 128  
129 -[[image:image-20220602162157-11.png||height="497" width="800"]]
130 130  
133 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
131 131  
132 132  
133 -(% style="color:blue" %)**4.  Check to see if TTN received the message**
134 134  
137 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
135 135  
136 -[[image:image-20220817093644-1.png]]
137 137  
138 138  
141 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
139 139  
140 -== 1.6  Example: How to join helium ==
141 141  
142 142  
145 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
143 143  
144 -(% style="color:blue" %)**1.  Create a new device.**
145 145  
148 +=== 2.8.1  Items needed for update ===
146 146  
147 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
150 +1. LA66 LoRaWAN Shield
151 +1. Arduino
152 +1. USB TO TTL Adapter
148 148  
154 +[[image:image-20220602100052-2.png||height="385" width="600"]]
149 149  
150 150  
151 -(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
157 +=== 2.8.2  Connection ===
152 152  
153 153  
154 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
160 +[[image:image-20220602101311-3.png||height="276" width="600"]]
155 155  
156 156  
163 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
157 157  
158 -(% style="color:blue" %)**3.  Use AT commands.**
165 +(% style="background-color:yellow" %)**GND  <-> GND
166 +TXD  <->  TXD
167 +RXD  <->  RXD**
159 159  
160 160  
161 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
170 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
162 162  
172 +Connect USB TTL Adapter to PC after connecting the wires
163 163  
164 164  
165 -(% style="color:blue" %)**4.  Use the serial port tool**
175 +[[image:image-20220602102240-4.png||height="304" width="600"]]
166 166  
167 167  
168 -[[image:image-20220909151517-2.png||height="543" width="708"]]
178 +=== 2.8.3  Upgrade steps ===
169 169  
170 170  
181 +==== 1.  Switch SW1 to put in ISP position ====
171 171  
172 -(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
173 173  
184 +[[image:image-20220602102824-5.png||height="306" width="600"]]
174 174  
175 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
176 176  
177 177  
188 +==== 2.  Press the RST switch once ====
178 178  
179 -(% style="color:blue" %)**6.  Network successfully.**
190 +[[image:image-20220602104701-12.png||height="285" width="600"]]
180 180  
181 181  
182 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
183 183  
194 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
184 184  
185 185  
186 -(% style="color:blue" %)**7.  Send uplink using command**
197 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
187 187  
188 188  
189 -[[image:image-20220912085244-1.png]]
200 +[[image:image-20220602103227-6.png]]
190 190  
191 191  
192 -[[image:image-20220912085307-2.png]]
203 +[[image:image-20220602103357-7.png]]
193 193  
194 194  
195 195  
196 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
207 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
208 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
197 197  
198 198  
211 +[[image:image-20220602103844-8.png]]
199 199  
200 -== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
201 201  
202 202  
203 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
215 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
216 +(% style="color:blue" %)**3. Select the bin file to burn**
204 204  
205 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
206 206  
219 +[[image:image-20220602104144-9.png]]
207 207  
208 -(% style="color:red" %)**Preconditions:**
209 209  
210 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
222 +[[image:image-20220602104251-10.png]]
211 211  
212 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
213 213  
225 +[[image:image-20220602104402-11.png]]
214 214  
215 215  
216 -(% style="color:blue" %)**Steps for usage:**
217 217  
218 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
229 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
230 +(% style="color:blue" %)**4. Click to start the download**
219 219  
220 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
232 +[[image:image-20220602104923-13.png]]
221 221  
222 222  
223 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
235 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
236 +(% style="color:blue" %)**5. Check update process**
224 224  
225 225  
239 +[[image:image-20220602104948-14.png]]
226 226  
227 -== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
228 228  
229 229  
230 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
243 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
244 +(% style="color:blue" %)**The following picture shows that the burning is successful**
231 231  
246 +[[image:image-20220602105251-15.png]]
232 232  
233 -(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
234 234  
235 235  
236 -[[image:image-20220723100439-2.png]]
250 += 3.  LA66 USB LoRaWAN Adapter =
237 237  
238 238  
253 +== 3.1  Overview ==
239 239  
240 -(% style="color:blue" %)**2.  Install Minicom in RPi.**
255 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
241 241  
242 242  
243 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
258 +== 3.2  Features ==
244 244  
245 - (% style="background-color:yellow" %)**apt update**
260 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
261 +* Ultra-long RF range
262 +* Support LoRaWAN v1.0.4 protocol
263 +* Support peer-to-peer protocol
264 +* TCXO crystal to ensure RF performance on low temperature
265 +* Spring RF antenna
266 +* Available in different frequency LoRaWAN frequency bands.
267 +* World-wide unique OTAA keys.
268 +* AT Command via UART-TTL interface
269 +* Firmware upgradable via UART interface
246 246  
247 - (% style="background-color:yellow" %)**apt install minicom**
271 +== 3.3  Specification ==
248 248  
273 +* CPU: 32-bit 48 MHz
274 +* Flash: 256KB
275 +* RAM: 64KB
276 +* Input Power Range: 5v
277 +* Frequency Range: 150 MHz ~~ 960 MHz
278 +* Maximum Power +22 dBm constant RF output
279 +* High sensitivity: -148 dBm
280 +* Temperature:
281 +** Storage: -55 ~~ +125℃
282 +** Operating: -40 ~~ +85℃
283 +* Humidity:
284 +** Storage: 5 ~~ 95% (Non-Condensing)
285 +** Operating: 10 ~~ 95% (Non-Condensing)
286 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
287 +* LoRa Rx current: <9 mA
249 249  
250 -Use minicom to connect to the RPI's terminal
289 +== 3.4  Pin Mapping & LED ==
251 251  
252 -[[image:image-20220602153146-3.png||height="439" width="500"]]
253 253  
254 254  
293 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
255 255  
256 -(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
257 257  
296 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
258 258  
259 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
260 260  
299 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
261 261  
262 -[[image:image-20220602154928-5.png||height="436" width="500"]]
263 263  
302 +[[image:image-20220602171217-1.png||height="538" width="800"]]
264 264  
265 265  
266 -(% style="color:blue" %)**4.  Send Uplink message**
305 +Open the serial port tool
267 267  
307 +[[image:image-20220602161617-8.png]]
268 268  
269 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
309 +[[image:image-20220602161718-9.png||height="457" width="800"]]
270 270  
271 -example: AT+SENDB=01,02,8,05820802581ea0a5
272 272  
273 273  
274 -[[image:image-20220602160339-6.png||height="517" width="600"]]
313 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
275 275  
315 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
276 276  
277 277  
278 -Check to see if TTN received the message
318 +[[image:image-20220602161935-10.png||height="498" width="800"]]
279 279  
280 280  
281 -[[image:image-20220602160627-7.png||height="369" width="800"]]
282 282  
322 +(% style="color:blue" %)**3. See Uplink Command**
283 283  
324 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
284 284  
285 -== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
326 +example: AT+SENDB=01,02,8,05820802581ea0a5
286 286  
328 +[[image:image-20220602162157-11.png||height="497" width="800"]]
287 287  
288 -=== 1.9.1  Hardware and Software Connection ===
289 289  
290 290  
332 +(% style="color:blue" %)**4. Check to see if TTN received the message**
291 291  
292 -==== (% style="color:blue" %)**Overview：**(%%) ====
334 +[[image:image-20220602162331-12.png||height="420" width="800"]]
293 293  
294 294  
295 -(((
296 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
297 297  
298 -* Send real-time location information of mobile phone to LoRaWAN network.
299 -* Check LoRaWAN network signal strengh.
300 -* Manually send messages to LoRaWAN network.
301 -)))
338 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
302 302  
303 303  
341 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
304 304  
305 305  
344 +(% style="color:red" %)**Preconditions:**
306 306  
307 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
346 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
308 308  
348 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
309 309  
310 -A USB to Type-C adapter is needed to connect to a Mobile phone.
311 311  
312 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
313 313  
314 -[[image:image-20220813174353-2.png||height="360" width="313"]]
352 +(% style="color:blue" %)**Steps for usage:**
315 315  
354 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
316 316  
356 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
317 317  
358 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
318 318  
319 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
320 320  
321 321  
322 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
362 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
323 323  
324 324  
325 -[[image:image-20220813173738-1.png]]
365 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
326 326  
327 327  
368 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
328 328  
370 +[[image:image-20220602171233-2.png||height="538" width="800"]]
329 329  
330 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
331 331  
332 332  
333 -Function and page introduction
374 +(% style="color:blue" %)**2. Install Minicom in RPi.**
334 334  
376 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
335 335  
336 -[[image:image-20220723113448-7.png||height="995" width="450"]]
378 + (% style="background-color:yellow" %)**apt update**
337 337  
380 + (% style="background-color:yellow" %)**apt install minicom**
338 338  
339 -**Block Explain:**
340 340  
341 -1.  Display LA66 USB LoRaWAN Module connection status
383 +Use minicom to connect to the RPI's terminal
342 342  
343 -2.  Check and reconnect
385 +[[image:image-20220602153146-3.png||height="439" width="500"]]
344 344  
345 -3.  Turn send timestamps on or off
346 346  
347 -4.  Display LoRaWan connection status
348 348  
349 -5.  Check LoRaWan connection status
389 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
390 +(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
350 350  
351 -6.  The RSSI value of the node when the ACK is received
392 +[[image:image-20220602154928-5.png||height="436" width="500"]]
352 352  
353 -7.  Node's Signal Strength Icon
354 354  
355 -8.  Configure Location Uplink Interval
356 356  
357 -9.  AT command input box
396 +(% style="color:blue" %)**4. Send Uplink message**
358 358  
359 -10.  Send Button:  Send input box info to LA66 USB Adapter
398 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
360 360  
361 -11.  Output Log from LA66 USB adapter
400 +example: AT+SENDB=01,02,8,05820802581ea0a5
362 362  
363 -12.  clear log button
364 364  
365 -13.  exit button
403 +[[image:image-20220602160339-6.png||height="517" width="600"]]
366 366  
367 367  
368 368  
369 -LA66 USB LoRaWAN Module not connected
407 +Check to see if TTN received the message
370 370  
409 +[[image:image-20220602160627-7.png||height="369" width="800"]]
371 371  
372 -[[image:image-20220723110520-5.png||height="677" width="508"]]
373 373  
374 374  
413 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
375 375  
376 -Connect LA66 USB LoRaWAN Module
377 377  
378 378  
379 -[[image:image-20220723110626-6.png||height="681" width="511"]]
417 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
380 380  
381 381  
382 382  
383 383  
384 -=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
422 += 4.  Order Info =
385 385  
386 386  
387 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
425 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
388 388  
389 389  
390 -[[image:image-20220723134549-8.png]]
391 -
392 -
393 -
394 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
395 -
396 -
397 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
398 -
399 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
400 -
401 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
402 -
403 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
404 -
405 -
406 -Example output in NodeRed is as below:
407 -
408 -[[image:image-20220723144339-1.png]]
409 -
410 -
411 -
412 -== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
413 -
414 -
415 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
416 -
417 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
418 -
419 -
420 -[[image:image-20220723150132-2.png]]
421 -
422 -
423 -
424 -= 2.  FAQ =
425 -
426 -
427 -== 2.1  How to Compile Source Code for LA66? ==
428 -
429 -
430 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
431 -
432 -
433 -
434 -= 3.  Order Info =
435 -
436 -
437 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
438 -
439 -
440 440  (% style="color:blue" %)**XXX**(%%): The default frequency band
441 441  
442 442  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -452,10 +452,8 @@
452 452  
453 453  
454 454  
455 -= 4.  Reference =
443 += 5.  Reference =
456 456  
445 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
457 457  
458 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
459 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
460 -
461 461  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content