Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 154.1
edited by Bei Jinggeng
on 2022/09/09 15:19
Change comment: There is no comment for this version
To version 87.9
edited by Xiaoling
on 2022/07/13 10:02
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Xiaoling
Content
... ... @@ -1,66 +1,47 @@
1 1  
2 2  
3 -**Table of Contents:**
4 -
5 5  {{toc/}}
6 6  
7 7  
8 8  
7 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
10 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
13 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
15 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 16  
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 -(((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 -)))
27 -
28 -(((
29 29  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 -)))
31 31  
32 -(((
33 33  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 -)))
35 35  
36 -(((
37 37  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 -)))
39 39  
40 40  
41 -
42 42  == 1.2  Features ==
43 43  
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
29 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
34 +* Ultra-long RF range
56 56  
57 -== 1.3  Specification ==
58 58  
59 59  
38 +== 1.3  Specification ==
39 +
60 60  * CPU: 32-bit 48 MHz
61 61  * Flash: 256KB
62 62  * RAM: 64KB
63 -* Input Power Range: 5v
43 +* Input Power Range: 1.8v ~~ 3.7v
44 +* Power Consumption: < 4uA.
64 64  * Frequency Range: 150 MHz ~~ 960 MHz
65 65  * Maximum Power +22 dBm constant RF output
66 66  * High sensitivity: -148 dBm
... ... @@ -72,335 +72,378 @@
72 72  ** Operating: 10 ~~ 95% (Non-Condensing)
73 73  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
74 74  * LoRa Rx current: <9 mA
56 +* I/O Voltage: 3.3v
75 75  
76 -== 1.4  Pin Mapping & LED ==
77 77  
78 78  
79 -[[image:image-20220813183239-3.png||height="526" width="662"]]
60 +== 1.4  AT Command ==
80 80  
62 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
81 81  
82 82  
83 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
65 +== 1.5  Dimension ==
84 84  
67 +[[image:image-20220517072526-1.png]]
85 85  
86 -(((
87 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
88 -)))
89 89  
90 90  
91 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
71 +== 1.6  Pin Mapping ==
92 92  
93 93  
94 -[[image:image-20220723100027-1.png]]
74 +[[image:image-20220523101537-1.png]]
95 95  
96 96  
97 -Open the serial port tool
98 98  
99 -[[image:image-20220602161617-8.png]]
78 +== 1.7  Land Pattern ==
100 100  
101 -[[image:image-20220602161718-9.png||height="457" width="800"]]
80 +[[image:image-20220517072821-2.png]]
102 102  
103 103  
104 104  
105 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
84 += 2.  LA66 LoRaWAN Shield =
106 106  
107 107  
108 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
87 +== 2.1  Overview ==
109 109  
89 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
110 110  
111 -[[image:image-20220602161935-10.png||height="498" width="800"]]
112 112  
92 +== 2.2  Features ==
113 113  
94 +* Arduino Shield base on LA66 LoRaWAN module
95 +* Support LoRaWAN v1.0.4 protocol
96 +* Support peer-to-peer protocol
97 +* TCXO crystal to ensure RF performance on low temperature
98 +* SMA connector
99 +* Available in different frequency LoRaWAN frequency bands.
100 +* World-wide unique OTAA keys.
101 +* AT Command via UART-TTL interface
102 +* Firmware upgradable via UART interface
103 +* Ultra-long RF range
114 114  
115 -(% style="color:blue" %)**3. See Uplink Command**
116 116  
117 117  
118 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
107 +== 2.3  Specification ==
119 119  
120 -example: AT+SENDB=01,02,8,05820802581ea0a5
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
121 121  
122 -[[image:image-20220602162157-11.png||height="497" width="800"]]
123 123  
124 124  
129 +== 2.4  Pin Mapping & LED ==
125 125  
126 -(% style="color:blue" %)**4. Check to see if TTN received the message**
127 127  
128 128  
129 -[[image:image-20220817093644-1.png]]
133 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
130 130  
131 131  
132 132  
133 -== 1.6  Example: How to join helium ==
137 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
134 134  
135 -(% style="color:blue" %)**1. Create a new device.**
136 136  
137 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
138 138  
141 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
139 139  
140 -(% style="color:blue" %)**2. Save the device after filling in the necessary information.**
141 141  
142 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
143 143  
145 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
144 144  
145 -(% style="color:blue" %)**3.  Use AT commands.**
146 146  
147 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
148 +=== 2.8.1  Items needed for update ===
148 148  
150 +1. LA66 LoRaWAN Shield
151 +1. Arduino
152 +1. USB TO TTL Adapter
149 149  
150 -(% style="color:blue" %)**4..  Use the serial port tool**
154 +[[image:image-20220602100052-2.png||height="385" width="600"]]
151 151  
152 -[[image:image-20220909151517-2.png||height="543" width="708"]]
153 153  
157 +=== 2.8.2  Connection ===
154 154  
155 -(% style="color:blue" %)**5.Use command AT+CFG to get device configuration**
156 156  
157 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
160 +[[image:image-20220602101311-3.png||height="276" width="600"]]
158 158  
159 159  
160 -(% style="color:blue" %)**6.  Network successfully.**
163 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
161 161  
162 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
165 +(% style="background-color:yellow" %)**GND  <-> GND
166 +TXD  <->  TXD
167 +RXD  <->  RXD**
163 163  
164 164  
165 -(% style="color:blue" %)**7.  Send uplink using command**
170 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
166 166  
167 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170659-5.png?rev=1.1||alt="image-20220907170659-5.png"]]
172 +Connect USB TTL Adapter to PC after connecting the wires
168 168  
169 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
170 170  
175 +[[image:image-20220602102240-4.png||height="304" width="600"]]
171 171  
172 -== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
173 173  
178 +=== 2.8.3  Upgrade steps ===
174 174  
175 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
176 176  
177 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
181 +==== 1.  Switch SW1 to put in ISP position ====
178 178  
179 179  
180 -(% style="color:red" %)**Preconditions:**
184 +[[image:image-20220602102824-5.png||height="306" width="600"]]
181 181  
182 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
183 183  
184 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
185 185  
188 +==== 2.  Press the RST switch once ====
186 186  
190 +[[image:image-20220602104701-12.png||height="285" width="600"]]
187 187  
188 -(% style="color:blue" %)**Steps for usage:**
189 189  
190 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
191 191  
192 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
194 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
193 193  
194 194  
195 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
197 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
196 196  
197 197  
200 +[[image:image-20220602103227-6.png]]
198 198  
199 -== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
200 200  
203 +[[image:image-20220602103357-7.png]]
201 201  
202 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
203 203  
204 204  
205 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
207 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
208 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
206 206  
207 207  
208 -[[image:image-20220723100439-2.png]]
211 +[[image:image-20220602103844-8.png]]
209 209  
210 210  
211 211  
212 -(% style="color:blue" %)**2. Install Minicom in RPi.**
215 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
216 +(% style="color:blue" %)**3. Select the bin file to burn**
213 213  
214 214  
215 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
219 +[[image:image-20220602104144-9.png]]
216 216  
217 - (% style="background-color:yellow" %)**apt update**
218 218  
219 - (% style="background-color:yellow" %)**apt install minicom**
222 +[[image:image-20220602104251-10.png]]
220 220  
221 221  
222 -Use minicom to connect to the RPI's terminal
225 +[[image:image-20220602104402-11.png]]
223 223  
224 -[[image:image-20220602153146-3.png||height="439" width="500"]]
225 225  
226 226  
229 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
230 +(% style="color:blue" %)**4. Click to start the download**
227 227  
228 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
232 +[[image:image-20220602104923-13.png]]
229 229  
230 230  
231 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
235 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
236 +(% style="color:blue" %)**5. Check update process**
232 232  
233 233  
234 -[[image:image-20220602154928-5.png||height="436" width="500"]]
239 +[[image:image-20220602104948-14.png]]
235 235  
236 236  
237 237  
238 -(% style="color:blue" %)**4. Send Uplink message**
243 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
244 +(% style="color:blue" %)**The following picture shows that the burning is successful**
239 239  
246 +[[image:image-20220602105251-15.png]]
240 240  
241 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
242 242  
243 -example: AT+SENDB=01,02,8,05820802581ea0a5
244 244  
250 += 3.  LA66 USB LoRaWAN Adapter =
245 245  
246 -[[image:image-20220602160339-6.png||height="517" width="600"]]
247 247  
253 +== 3.1  Overview ==
248 248  
255 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
249 249  
250 -Check to see if TTN received the message
251 251  
252 -[[image:image-20220602160627-7.png||height="369" width="800"]]
258 +== 3.2  Features ==
253 253  
260 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
261 +* Ultra-long RF range
262 +* Support LoRaWAN v1.0.4 protocol
263 +* Support peer-to-peer protocol
264 +* TCXO crystal to ensure RF performance on low temperature
265 +* Spring RF antenna
266 +* Available in different frequency LoRaWAN frequency bands.
267 +* World-wide unique OTAA keys.
268 +* AT Command via UART-TTL interface
269 +* Firmware upgradable via UART interface
254 254  
271 +== 3.3  Specification ==
255 255  
256 -== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
273 +* CPU: 32-bit 48 MHz
274 +* Flash: 256KB
275 +* RAM: 64KB
276 +* Input Power Range: 5v
277 +* Frequency Range: 150 MHz ~~ 960 MHz
278 +* Maximum Power +22 dBm constant RF output
279 +* High sensitivity: -148 dBm
280 +* Temperature:
281 +** Storage: -55 ~~ +125℃
282 +** Operating: -40 ~~ +85℃
283 +* Humidity:
284 +** Storage: 5 ~~ 95% (Non-Condensing)
285 +** Operating: 10 ~~ 95% (Non-Condensing)
286 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
287 +* LoRa Rx current: <9 mA
257 257  
289 +== 3.4  Pin Mapping & LED ==
258 258  
259 -=== 1.8.1  Hardware and Software Connection ===
260 260  
261 261  
293 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
262 262  
263 -==== (% style="color:blue" %)**Overview：**(%%) ====
264 264  
296 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
265 265  
266 -(((
267 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
268 268  
269 -* Send real-time location information of mobile phone to LoRaWAN network.
270 -* Check LoRaWAN network signal strengh.
271 -* Manually send messages to LoRaWAN network.
272 -)))
299 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
273 273  
274 274  
302 +[[image:image-20220602171217-1.png||height="538" width="800"]]
275 275  
276 276  
277 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
305 +Open the serial port tool
278 278  
307 +[[image:image-20220602161617-8.png]]
279 279  
280 -A USB to Type-C adapter is needed to connect to a Mobile phone.
309 +[[image:image-20220602161718-9.png||height="457" width="800"]]
281 281  
282 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
283 283  
284 -[[image:image-20220813174353-2.png||height="360" width="313"]]
285 285  
313 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
286 286  
315 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
287 287  
288 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
289 289  
318 +[[image:image-20220602161935-10.png||height="498" width="800"]]
290 290  
291 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
292 292  
293 -[[image:image-20220813173738-1.png]]
294 294  
322 +(% style="color:blue" %)**3. See Uplink Command**
295 295  
324 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
296 296  
297 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
326 +example: AT+SENDB=01,02,8,05820802581ea0a5
298 298  
328 +[[image:image-20220602162157-11.png||height="497" width="800"]]
299 299  
300 -Function and page introduction
301 301  
302 302  
303 -[[image:image-20220723113448-7.png||height="995" width="450"]]
332 +(% style="color:blue" %)**4. Check to see if TTN received the message**
304 304  
305 -**Block Explain:**
334 +[[image:image-20220602162331-12.png||height="420" width="800"]]
306 306  
307 -1.  Display LA66 USB LoRaWAN Module connection status
308 308  
309 -2.  Check and reconnect
310 310  
311 -3.  Turn send timestamps on or off
338 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
312 312  
313 -4.  Display LoRaWan connection status
314 314  
315 -5.  Check LoRaWan connection status
341 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
316 316  
317 -6.  The RSSI value of the node when the ACK is received
318 318  
319 -7.  Node's Signal Strength Icon
344 +(% style="color:red" %)**Preconditions:**
320 320  
321 -8.  Configure Location Uplink Interval
346 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
322 322  
323 -9.  AT command input box
348 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
324 324  
325 -10.  Send Button:  Send input box info to LA66 USB Adapter
326 326  
327 -11.  Output Log from LA66 USB adapter
328 328  
329 -12.  clear log button
352 +(% style="color:blue" %)**Steps for usage:**
330 330  
331 -13.  exit button
354 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
332 332  
356 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
333 333  
358 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
334 334  
335 -LA66 USB LoRaWAN Module not connected
336 336  
337 337  
338 -[[image:image-20220723110520-5.png||height="677" width="508"]]
362 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
339 339  
340 340  
365 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
341 341  
342 -Connect LA66 USB LoRaWAN Module
343 343  
344 -[[image:image-20220723110626-6.png||height="681" width="511"]]
368 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
345 345  
370 +[[image:image-20220602171233-2.png||height="538" width="800"]]
346 346  
347 347  
348 -=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
349 349  
374 +(% style="color:blue" %)**2. Install Minicom in RPi.**
350 350  
351 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
376 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
352 352  
378 + (% style="background-color:yellow" %)**apt update**
353 353  
354 -[[image:image-20220723134549-8.png]]
380 + (% style="background-color:yellow" %)**apt install minicom**
355 355  
356 356  
383 +Use minicom to connect to the RPI's terminal
357 357  
358 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
385 +[[image:image-20220602153146-3.png||height="439" width="500"]]
359 359  
360 360  
361 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
362 362  
363 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
389 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
390 +(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
364 364  
365 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
392 +[[image:image-20220602154928-5.png||height="436" width="500"]]
366 366  
367 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
368 368  
369 369  
370 -Example output in NodeRed is as below:
396 +(% style="color:blue" %)**4. Send Uplink message**
371 371  
372 -[[image:image-20220723144339-1.png]]
398 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
373 373  
400 +example: AT+SENDB=01,02,8,05820802581ea0a5
374 374  
375 375  
376 -== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
403 +[[image:image-20220602160339-6.png||height="517" width="600"]]
377 377  
378 378  
379 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
380 380  
381 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
407 +Check to see if TTN received the message
382 382  
409 +[[image:image-20220602160627-7.png||height="369" width="800"]]
383 383  
384 -[[image:image-20220723150132-2.png]]
385 385  
386 386  
413 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
387 387  
388 -= 2.  FAQ =
389 389  
390 390  
391 -== 2.1  How to Compile Source Code for LA66? ==
417 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
392 392  
393 393  
394 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
395 395  
396 396  
422 += 4.  Order Info =
397 397  
398 -= 3.  Order Info =
399 399  
425 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
400 400  
401 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
402 402  
403 -
404 404  (% style="color:blue" %)**XXX**(%%): The default frequency band
405 405  
406 406  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -413,10 +413,11 @@
413 413  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
414 414  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
415 415  
416 -= 4.  Reference =
417 417  
418 418  
419 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
420 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
421 421  
443 += 5.  Reference =
444 +
445 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
446 +
422 422  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content