Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 154.1
edited by Bei Jinggeng
on 2022/09/09 15:19
Change comment: There is no comment for this version
To version 87.17
edited by Xiaoling
on 2022/07/13 10:13
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Xiaoling
Content
... ... @@ -6,23 +6,18 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
15 -
16 -
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 20  (((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
16 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
22 22  )))
23 23  
24 24  (((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
20 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 26  )))
27 27  
28 28  (((
... ... @@ -38,29 +38,27 @@
38 38  )))
39 39  
40 40  
41 -
42 42  == 1.2  Features ==
43 43  
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
41 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
46 +* Ultra-long RF range
56 56  
57 -== 1.3  Specification ==
58 58  
59 59  
50 +== 1.3  Specification ==
51 +
60 60  * CPU: 32-bit 48 MHz
61 61  * Flash: 256KB
62 62  * RAM: 64KB
63 -* Input Power Range: 5v
55 +* Input Power Range: 1.8v ~~ 3.7v
56 +* Power Consumption: < 4uA.
64 64  * Frequency Range: 150 MHz ~~ 960 MHz
65 65  * Maximum Power +22 dBm constant RF output
66 66  * High sensitivity: -148 dBm
... ... @@ -72,335 +72,393 @@
72 72  ** Operating: 10 ~~ 95% (Non-Condensing)
73 73  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
74 74  * LoRa Rx current: <9 mA
68 +* I/O Voltage: 3.3v
75 75  
76 -== 1.4  Pin Mapping & LED ==
77 77  
78 78  
79 -[[image:image-20220813183239-3.png||height="526" width="662"]]
72 +== 1.4  AT Command ==
80 80  
74 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
81 81  
82 82  
83 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
77 +== 1.5  Dimension ==
84 84  
79 +[[image:image-20220517072526-1.png]]
85 85  
86 -(((
87 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
88 -)))
89 89  
90 90  
91 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
83 +== 1.6  Pin Mapping ==
92 92  
93 93  
94 -[[image:image-20220723100027-1.png]]
86 +[[image:image-20220523101537-1.png]]
95 95  
96 96  
97 -Open the serial port tool
98 98  
99 -[[image:image-20220602161617-8.png]]
90 +== 1.7  Land Pattern ==
100 100  
101 -[[image:image-20220602161718-9.png||height="457" width="800"]]
92 +[[image:image-20220517072821-2.png]]
102 102  
103 103  
104 104  
105 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
96 += 2.  LA66 LoRaWAN Shield =
106 106  
107 107  
108 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
99 +== 2.1  Overview ==
109 109  
101 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
110 110  
111 -[[image:image-20220602161935-10.png||height="498" width="800"]]
112 112  
104 +== 2.2  Features ==
113 113  
106 +* Arduino Shield base on LA66 LoRaWAN module
107 +* Support LoRaWAN v1.0.4 protocol
108 +* Support peer-to-peer protocol
109 +* TCXO crystal to ensure RF performance on low temperature
110 +* SMA connector
111 +* Available in different frequency LoRaWAN frequency bands.
112 +* World-wide unique OTAA keys.
113 +* AT Command via UART-TTL interface
114 +* Firmware upgradable via UART interface
115 +* Ultra-long RF range
114 114  
115 -(% style="color:blue" %)**3. See Uplink Command**
116 116  
117 117  
118 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
119 +== 2.3  Specification ==
119 119  
120 -example: AT+SENDB=01,02,8,05820802581ea0a5
121 +* CPU: 32-bit 48 MHz
122 +* Flash: 256KB
123 +* RAM: 64KB
124 +* Input Power Range: 1.8v ~~ 3.7v
125 +* Power Consumption: < 4uA.
126 +* Frequency Range: 150 MHz ~~ 960 MHz
127 +* Maximum Power +22 dBm constant RF output
128 +* High sensitivity: -148 dBm
129 +* Temperature:
130 +** Storage: -55 ~~ +125℃
131 +** Operating: -40 ~~ +85℃
132 +* Humidity:
133 +** Storage: 5 ~~ 95% (Non-Condensing)
134 +** Operating: 10 ~~ 95% (Non-Condensing)
135 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
136 +* LoRa Rx current: <9 mA
137 +* I/O Voltage: 3.3v
121 121  
122 -[[image:image-20220602162157-11.png||height="497" width="800"]]
123 123  
124 124  
141 +== 2.4  Pin Mapping & LED ==
125 125  
126 -(% style="color:blue" %)**4. Check to see if TTN received the message**
127 127  
128 128  
129 -[[image:image-20220817093644-1.png]]
145 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
130 130  
131 131  
132 132  
133 -== 1.6  Example: How to join helium ==
149 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
134 134  
135 -(% style="color:blue" %)**1. Create a new device.**
136 136  
137 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
138 138  
153 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
139 139  
140 -(% style="color:blue" %)**2. Save the device after filling in the necessary information.**
141 141  
142 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
143 143  
157 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
144 144  
145 -(% style="color:blue" %)**3.  Use AT commands.**
146 146  
147 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
160 +=== 2.8.1  Items needed for update ===
148 148  
162 +1. LA66 LoRaWAN Shield
163 +1. Arduino
164 +1. USB TO TTL Adapter
149 149  
150 -(% style="color:blue" %)**4..  Use the serial port tool**
151 151  
152 -[[image:image-20220909151517-2.png||height="543" width="708"]]
153 153  
154 154  
155 -(% style="color:blue" %)**5.Use command AT+CFG to get device configuration**
169 +[[image:image-20220602100052-2.png||height="385" width="600"]]
156 156  
157 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
158 158  
172 +=== 2.8.2  Connection ===
159 159  
160 -(% style="color:blue" %)**6.  Network successfully.**
161 161  
162 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
175 +[[image:image-20220602101311-3.png||height="276" width="600"]]
163 163  
164 164  
165 -(% style="color:blue" %)**7.  Send uplink using command**
178 +(((
179 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
180 +)))
166 166  
167 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170659-5.png?rev=1.1||alt="image-20220907170659-5.png"]]
182 +(((
183 +(% style="background-color:yellow" %)**GND  <-> GND
184 +TXD  <->  TXD
185 +RXD  <->  RXD**
186 +)))
168 168  
169 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
170 170  
189 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
171 171  
172 -== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
191 +Connect USB TTL Adapter to PC after connecting the wires
173 173  
174 174  
175 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
194 +[[image:image-20220602102240-4.png||height="304" width="600"]]
176 176  
177 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
178 178  
197 +=== 2.8.3  Upgrade steps ===
179 179  
180 -(% style="color:red" %)**Preconditions:**
181 181  
182 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
200 +==== 1.  Switch SW1 to put in ISP position ====
183 183  
184 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
185 185  
203 +[[image:image-20220602102824-5.png||height="306" width="600"]]
186 186  
187 187  
188 -(% style="color:blue" %)**Steps for usage:**
189 189  
190 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
207 +==== 2.  Press the RST switch once ====
191 191  
192 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
193 193  
210 +[[image:image-20220602104701-12.png||height="285" width="600"]]
194 194  
195 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
196 196  
197 197  
214 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
198 198  
199 -== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
200 200  
217 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
201 201  
202 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
203 203  
220 +[[image:image-20220602103227-6.png]]
204 204  
205 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
206 206  
223 +[[image:image-20220602103357-7.png]]
207 207  
208 -[[image:image-20220723100439-2.png]]
209 209  
210 210  
227 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
228 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
211 211  
212 -(% style="color:blue" %)**2. Install Minicom in RPi.**
213 213  
231 +[[image:image-20220602103844-8.png]]
214 214  
215 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
216 216  
217 - (% style="background-color:yellow" %)**apt update**
218 218  
219 - (% style="background-color:yellow" %)**apt install minicom**
235 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
236 +(% style="color:blue" %)**3. Select the bin file to burn**
220 220  
221 221  
222 -Use minicom to connect to the RPI's terminal
239 +[[image:image-20220602104144-9.png]]
223 223  
224 -[[image:image-20220602153146-3.png||height="439" width="500"]]
225 225  
242 +[[image:image-20220602104251-10.png]]
226 226  
227 227  
228 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
245 +[[image:image-20220602104402-11.png]]
229 229  
230 230  
231 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
232 232  
249 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
250 +(% style="color:blue" %)**4. Click to start the download**
233 233  
234 -[[image:image-20220602154928-5.png||height="436" width="500"]]
252 +[[image:image-20220602104923-13.png]]
235 235  
236 236  
237 237  
238 -(% style="color:blue" %)**4. Send Uplink message**
256 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
257 +(% style="color:blue" %)**5. Check update process**
239 239  
240 240  
241 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
260 +[[image:image-20220602104948-14.png]]
242 242  
243 -example: AT+SENDB=01,02,8,05820802581ea0a5
244 244  
245 245  
246 -[[image:image-20220602160339-6.png||height="517" width="600"]]
264 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
265 +(% style="color:blue" %)**The following picture shows that the burning is successful**
247 247  
267 +[[image:image-20220602105251-15.png]]
248 248  
249 249  
250 -Check to see if TTN received the message
251 251  
252 -[[image:image-20220602160627-7.png||height="369" width="800"]]
271 += 3.  LA66 USB LoRaWAN Adapter =
253 253  
254 254  
274 +== 3.1  Overview ==
255 255  
256 -== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
276 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
257 257  
258 258  
259 -=== 1.8.1  Hardware and Software Connection ===
279 +== 3.2  Features ==
260 260  
281 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
282 +* Ultra-long RF range
283 +* Support LoRaWAN v1.0.4 protocol
284 +* Support peer-to-peer protocol
285 +* TCXO crystal to ensure RF performance on low temperature
286 +* Spring RF antenna
287 +* Available in different frequency LoRaWAN frequency bands.
288 +* World-wide unique OTAA keys.
289 +* AT Command via UART-TTL interface
290 +* Firmware upgradable via UART interface
261 261  
262 262  
263 -==== (% style="color:blue" %)**Overview：**(%%) ====
264 264  
294 +== 3.3  Specification ==
265 265  
266 -(((
267 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
296 +* CPU: 32-bit 48 MHz
297 +* Flash: 256KB
298 +* RAM: 64KB
299 +* Input Power Range: 5v
300 +* Frequency Range: 150 MHz ~~ 960 MHz
301 +* Maximum Power +22 dBm constant RF output
302 +* High sensitivity: -148 dBm
303 +* Temperature:
304 +** Storage: -55 ~~ +125℃
305 +** Operating: -40 ~~ +85℃
306 +* Humidity:
307 +** Storage: 5 ~~ 95% (Non-Condensing)
308 +** Operating: 10 ~~ 95% (Non-Condensing)
309 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
310 +* LoRa Rx current: <9 mA
268 268  
269 -* Send real-time location information of mobile phone to LoRaWAN network.
270 -* Check LoRaWAN network signal strengh.
271 -* Manually send messages to LoRaWAN network.
272 -)))
273 273  
274 274  
314 +== 3.4  Pin Mapping & LED ==
275 275  
276 276  
277 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
278 278  
318 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
279 279  
280 -A USB to Type-C adapter is needed to connect to a Mobile phone.
281 281  
282 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
321 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
283 283  
284 -[[image:image-20220813174353-2.png||height="360" width="313"]]
285 285  
324 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
286 286  
287 287  
288 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
327 +[[image:image-20220602171217-1.png||height="538" width="800"]]
289 289  
290 290  
291 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
330 +Open the serial port tool
292 292  
293 -[[image:image-20220813173738-1.png]]
332 +[[image:image-20220602161617-8.png]]
294 294  
334 +[[image:image-20220602161718-9.png||height="457" width="800"]]
295 295  
296 296  
297 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
298 298  
338 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
299 299  
300 -Function and page introduction
340 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
301 301  
302 302  
303 -[[image:image-20220723113448-7.png||height="995" width="450"]]
343 +[[image:image-20220602161935-10.png||height="498" width="800"]]
304 304  
305 -**Block Explain:**
306 306  
307 -1.  Display LA66 USB LoRaWAN Module connection status
308 308  
309 -2.  Check and reconnect
347 +(% style="color:blue" %)**3. See Uplink Command**
310 310  
311 -3.  Turn send timestamps on or off
349 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
312 312  
313 -4.  Display LoRaWan connection status
351 +example: AT+SENDB=01,02,8,05820802581ea0a5
314 314  
315 -5.  Check LoRaWan connection status
353 +[[image:image-20220602162157-11.png||height="497" width="800"]]
316 316  
317 -6.  The RSSI value of the node when the ACK is received
318 318  
319 -7.  Node's Signal Strength Icon
320 320  
321 -8.  Configure Location Uplink Interval
357 +(% style="color:blue" %)**4. Check to see if TTN received the message**
322 322  
323 -9.  AT command input box
359 +[[image:image-20220602162331-12.png||height="420" width="800"]]
324 324  
325 -10.  Send Button:  Send input box info to LA66 USB Adapter
326 326  
327 -11.  Output Log from LA66 USB adapter
328 328  
329 -12.  clear log button
363 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
330 330  
331 -13.  exit button
332 332  
366 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
333 333  
334 334  
335 -LA66 USB LoRaWAN Module not connected
369 +(% style="color:red" %)**Preconditions:**
336 336  
371 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
337 337  
338 -[[image:image-20220723110520-5.png||height="677" width="508"]]
373 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
339 339  
340 340  
341 341  
342 -Connect LA66 USB LoRaWAN Module
377 +(% style="color:blue" %)**Steps for usage:**
343 343  
344 -[[image:image-20220723110626-6.png||height="681" width="511"]]
379 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
345 345  
381 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
346 346  
383 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
347 347  
348 -=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
349 349  
350 350  
351 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
387 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
352 352  
353 353  
354 -[[image:image-20220723134549-8.png]]
390 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
355 355  
356 356  
393 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
357 357  
358 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
395 +[[image:image-20220602171233-2.png||height="538" width="800"]]
359 359  
360 360  
361 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
362 362  
363 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
399 +(% style="color:blue" %)**2. Install Minicom in RPi.**
364 364  
365 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
401 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
366 366  
367 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
403 + (% style="background-color:yellow" %)**apt update**
368 368  
405 + (% style="background-color:yellow" %)**apt install minicom**
369 369  
370 -Example output in NodeRed is as below:
371 371  
372 -[[image:image-20220723144339-1.png]]
408 +Use minicom to connect to the RPI's terminal
373 373  
410 +[[image:image-20220602153146-3.png||height="439" width="500"]]
374 374  
375 375  
376 -== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
377 377  
414 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
378 378  
379 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
416 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
380 380  
381 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
382 382  
419 +[[image:image-20220602154928-5.png||height="436" width="500"]]
383 383  
384 -[[image:image-20220723150132-2.png]]
385 385  
386 386  
423 +(% style="color:blue" %)**4. Send Uplink message**
387 387  
388 -= 2.  FAQ =
425 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
389 389  
427 +example: AT+SENDB=01,02,8,05820802581ea0a5
390 390  
391 -== 2.1  How to Compile Source Code for LA66? ==
392 392  
430 +[[image:image-20220602160339-6.png||height="517" width="600"]]
393 393  
394 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
395 395  
396 396  
434 +Check to see if TTN received the message
397 397  
398 -= 3.  Order Info =
436 +[[image:image-20220602160627-7.png||height="369" width="800"]]
399 399  
400 400  
401 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
402 402  
440 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
403 403  
442 +
443 +
444 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
445 +
446 +
447 +
448 +
449 += 4.  Order Info =
450 +
451 +
452 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
453 +
454 +
404 404  (% style="color:blue" %)**XXX**(%%): The default frequency band
405 405  
406 406  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -413,10 +413,10 @@
413 413  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
414 414  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
415 415  
416 -= 4.  Reference =
417 417  
418 418  
419 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
420 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
469 += 5.  Reference =
421 421  
471 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
472 +
422 422  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content