Changes for page LA66 USB LoRaWAN Adapter User Manual

Last modified by Xiaoling on 2025/02/07 16:37

From 75.1 to 74.1 From 155.1 to 154.1

From version 154.1

edited by Bei Jinggeng
on 2022/09/09 15:19

Change comment: There is no comment for this version

To version 75.1

edited by Edwin Chen
on 2022/07/03 00:21

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (3 modified, 0 added, 0 removed)
Attachments (0 modified, 0 added, 43 removed)

Details

Page properties

Title

@@ -1,1 +1,1 @@
--LA66 USB LoRaWAN Adapter User Manual
++LA66 LoRaWAN Module

Author

@@ -1,1 +1,1 @@
--XWiki.Bei
++XWiki.Edwin

Content

@@ -1,66 +1,41 @@
--
--
--**Table of Contents:**
--
++{{box cssClass="floatinginfobox" title="**Contents**"}}
  {{toc/}}
++{{/box}}
++= LA66 LoRaWAN Module =
++== What is LA66 LoRaWAN Module ==
++(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
++(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
--= 1.  LA66 USB LoRaWAN Adapter =
--
--
--== 1.1  Overview ==
--
--
--[[image:image-20220715001142-3.png||height="145" width="220"]]
--
--
--(((
--(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
--)))
--
--(((
--(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
--)))
--
--(((
  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
--)))
--(((
  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
--)))
--(((
  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
--)))
++== Features ==
--== 1.2  Features ==
--
--
--* LoRaWAN USB adapter base on LA66 LoRaWAN module
--* Ultra-long RF range
  * Support LoRaWAN v1.0.4 protocol
  * Support peer-to-peer protocol
  * TCXO crystal to ensure RF performance on low temperature
--* Spring RF antenna
++* SMD Antenna pad and i-pex antenna connector
  * Available in different frequency LoRaWAN frequency bands.
  * World-wide unique OTAA keys.
  * AT Command via UART-TTL interface
  * Firmware upgradable via UART interface
--* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
++* Ultra-long RF range
--== 1.3  Specification ==
++== Specification ==
--
  * CPU: 32-bit 48 MHz
  * Flash: 256KB
  * RAM: 64KB
--* Input Power Range: 5v
++* Input Power Range: 1.8v ~~ 3.7v
++* Power Consumption: < 4uA.
  * Frequency Range: 150 MHz ~~ 960 MHz
  * Maximum Power +22 dBm constant RF output
  * High sensitivity: -148 dBm
@@ -72,351 +72,336 @@
  ** Operating: 10 ~~ 95% (Non-Condensing)
  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
  * LoRa Rx current: <9 mA
++* I/O Voltage: 3.3v
--== 1.4  Pin Mapping & LED ==
++== AT Command ==
++AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
--[[image:image-20220813183239-3.png||height="526" width="662"]]
++== Dimension ==
++[[image:image-20220517072526-1.png]]
--== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
++== Pin Mapping ==
--(((
--Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
--)))
++[[image:image-20220523101537-1.png]]
++== Land Pattern ==
--(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
++[[image:image-20220517072821-2.png]]
--[[image:image-20220723100027-1.png]]
++== Order Info ==
++Part Number: **LA66-XXX**
--Open the serial port tool
++**XX**: The default frequency band
--[[image:image-20220602161617-8.png]]
++* **AS923**: LoRaWAN AS923 band
++* **AU915**: LoRaWAN AU915 band
++* **EU433**: LoRaWAN EU433 band
++* **EU868**: LoRaWAN EU868 band
++* **KR920**: LoRaWAN KR920 band
++* **US915**: LoRaWAN US915 band
++* **IN865**: LoRaWAN IN865 band
++* **CN470**: LoRaWAN CN470 band
++* **PP**: Peer to Peer LoRa Protocol
--[[image:image-20220602161718-9.png||height="457" width="800"]]
++= LA66 LoRaWAN Shield =
++== Overview ==
++LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
--(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
++== Features ==
--The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
++* Arduino Shield base on LA66 LoRaWAN module
++* Support LoRaWAN v1.0.4 protocol
++* Support peer-to-peer protocol
++* TCXO crystal to ensure RF performance on low temperature
++* SMA connector
++* Available in different frequency LoRaWAN frequency bands.
++* World-wide unique OTAA keys.
++* AT Command via UART-TTL interface
++* Firmware upgradable via UART interface
++* Ultra-long RF range
++== Specification ==
--[[image:image-20220602161935-10.png||height="498" width="800"]]
++* CPU: 32-bit 48 MHz
++* Flash: 256KB
++* RAM: 64KB
++* Input Power Range: 1.8v ~~ 3.7v
++* Power Consumption: < 4uA.
++* Frequency Range: 150 MHz ~~ 960 MHz
++* Maximum Power +22 dBm constant RF output
++* High sensitivity: -148 dBm
++* Temperature:
++** Storage: -55 ~~ +125℃
++** Operating: -40 ~~ +85℃
++* Humidity:
++** Storage: 5 ~~ 95% (Non-Condensing)
++** Operating: 10 ~~ 95% (Non-Condensing)
++* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
++* LoRa Rx current: <9 mA
++* I/O Voltage: 3.3v
++== Pin Mapping & LED ==
++== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
--(% style="color:blue" %)**3. See Uplink Command**
++== Example: Join TTN network and send an uplink message, get downlink message. ==
++== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
--Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
++== Upgrade Firmware of LA66 LoRaWAN Shield ==
--example: AT+SENDB=01,02,8,05820802581ea0a5
++=== Items needed for update ===
--[[image:image-20220602162157-11.png||height="497" width="800"]]
++1. LA66 LoRaWAN Shield
++1. Arduino
++1. USB TO TTL Adapter
++[[image:image-20220602100052-2.png||height="385" width="600"]]
--(% style="color:blue" %)**4. Check to see if TTN received the message**
++=== Connection ===
++[[image:image-20220602101311-3.png||height="276" width="600"]]
--[[image:image-20220817093644-1.png]]
++(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
++**GND                               <-> GND
++TXD                               <-> TXD
++RXD                               <-> RXD**
++Put a jumper cap on JP6 of LA66 LoRaWAN Shield.
++Connect USB TTL Adapter to PC after connecting the wires
--== 1.6  Example: How to join helium ==
--(% style="color:blue" %)**1. Create a new device.**
++[[image:image-20220602102240-4.png||height="304" width="600"]]
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
++=== Upgrade steps ===
--(% style="color:blue" %)**2. Save the device after filling in the necessary information.**
++==== Switch SW1 to put in ISP position ====
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
++[[image:image-20220602102824-5.png||height="306" width="600"]]
--(% style="color:blue" %)**3.  Use AT commands.**
++==== Press the RST switch once ====
--[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
++[[image:image-20220602104701-12.png||height="285" width="600"]]
--(% style="color:blue" %)**4..  Use the serial port tool**
++==== Open the Upgrade tool (Tremo Programmer) in PC ====
--[[image:image-20220909151517-2.png||height="543" width="708"]]
++Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
++[[image:image-20220602103227-6.png]]
--(% style="color:blue" %)**5.Use command AT+CFG to get device configuration**
++[[image:image-20220602103357-7.png]]
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
++===== Select the COM port corresponding to USB TTL =====
++[[image:image-20220602103844-8.png]]
--(% style="color:blue" %)**6.  Network successfully.**
++===== Select the bin file to burn =====
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
++[[image:image-20220602104144-9.png]]
++[[image:image-20220602104251-10.png]]
--(% style="color:blue" %)**7.  Send uplink using command**
++[[image:image-20220602104402-11.png]]
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170659-5.png?rev=1.1||alt="image-20220907170659-5.png"]]
++===== Click to start the download =====
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
++[[image:image-20220602104923-13.png]]
++===== The following figure appears to prove that the burning is in progress =====
--== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
++[[image:image-20220602104948-14.png]]
++===== The following picture appears to prove that the burning is successful =====
--**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
++[[image:image-20220602105251-15.png]]
--(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
++== Order Info ==
--(% style="color:red" %)**Preconditions:**
++Part Number: **LA66-LoRaWAN-Shield-XXX**
--(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
++**XX**: The default frequency band
--(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
++* **AS923**: LoRaWAN AS923 band
++* **AU915**: LoRaWAN AU915 band
++* **EU433**: LoRaWAN EU433 band
++* **EU868**: LoRaWAN EU868 band
++* **KR920**: LoRaWAN KR920 band
++* **US915**: LoRaWAN US915 band
++* **IN865**: LoRaWAN IN865 band
++* **CN470**: LoRaWAN CN470 band
++* **PP**: Peer to Peer LoRa Protocol
++== Package Info ==
++* LA66 LoRaWAN Shield x 1
++* RF Antenna x 1
--(% style="color:blue" %)**Steps for usage:**
--(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
++= LA66 USB LoRaWAN Adapter =
--(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
++== Overview ==
++LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
--[[image:image-20220602115852-3.png||height="450" width="1187"]]
++== Features ==
++* LoRaWAN USB adapter base on LA66 LoRaWAN module
++* Ultra-long RF range
++* Support LoRaWAN v1.0.4 protocol
++* Support peer-to-peer protocol
++* TCXO crystal to ensure RF performance on low temperature
++* Spring RF antenna
++* Available in different frequency LoRaWAN frequency bands.
++* World-wide unique OTAA keys.
++* AT Command via UART-TTL interface
++* Firmware upgradable via UART interface
--== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
++== Specification ==
++* CPU: 32-bit 48 MHz
++* Flash: 256KB
++* RAM: 64KB
++* Input Power Range: 5v
++* Frequency Range: 150 MHz ~~ 960 MHz
++* Maximum Power +22 dBm constant RF output
++* High sensitivity: -148 dBm
++* Temperature:
++** Storage: -55 ~~ +125℃
++** Operating: -40 ~~ +85℃
++* Humidity:
++** Storage: 5 ~~ 95% (Non-Condensing)
++** Operating: 10 ~~ 95% (Non-Condensing)
++* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
++* LoRa Rx current: <9 mA
--Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
++== Pin Mapping & LED ==
++== Example Send & Get Messages via LoRaWAN in PC ==
--(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
++Connect the LA66 LoRa Shield to the PC
++[[image:image-20220602171217-1.png||height="615" width="915"]]
--[[image:image-20220723100439-2.png]]
++Open the serial port tool
++[[image:image-20220602161617-8.png]]
++[[image:image-20220602161718-9.png||height="529" width="927"]]
--(% style="color:blue" %)**2. Install Minicom in RPi.**
++Press the reset switch RST on the LA66 LoRa Shield.
++The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
--(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
++[[image:image-20220602161935-10.png]]
-- (% style="background-color:yellow" %)**apt update**
++send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
-- (% style="background-color:yellow" %)**apt install minicom**
++example: AT+SENDB=01,02,8,05820802581ea0a5
++[[image:image-20220602162157-11.png]]
--Use minicom to connect to the RPI's terminal
++Check to see if TTN received the message
--[[image:image-20220602153146-3.png||height="439" width="500"]]
++[[image:image-20220602162331-12.png||height="547" width="1044"]]
++== Example Send & Get Messages via LoRaWAN in RPi ==
++Connect the LA66 LoRa Shield to the RPI
--(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
++[[image:image-20220602171233-2.png||height="592" width="881"]]
++Log in to the RPI's terminal and connect to the serial port
--The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
++[[image:image-20220602153146-3.png]]
++Press the reset switch RST on the LA66 LoRa Shield.
++The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
--[[image:image-20220602154928-5.png||height="436" width="500"]]
++[[image:image-20220602154928-5.png]]
++send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
--
--(% style="color:blue" %)**4. Send Uplink message**
--
--
--Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
--
  example: AT+SENDB=01,02,8,05820802581ea0a5
++[[image:image-20220602160339-6.png]]
--[[image:image-20220602160339-6.png||height="517" width="600"]]
--
--
--
  Check to see if TTN received the message
--[[image:image-20220602160627-7.png||height="369" width="800"]]
++[[image:image-20220602160627-7.png||height="468" width="1013"]]
++=== Install Minicom ===
++Enter the following command in the RPI terminal
--== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
++apt update
++[[image:image-20220602143155-1.png]]
--=== 1.8.1  Hardware and Software Connection ===
++apt install minicom
++[[image:image-20220602143744-2.png]]
++=== Send PC's CPU/RAM usage to TTN via script. ===
--==== (% style="color:blue" %)**Overview：**(%%) ====
++==== Take python as an example： ====
++===== Preconditions: =====
--(((
--DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
++1.LA66 USB LoRaWAN Adapter works fine
--* Send real-time location information of mobile phone to LoRaWAN network.
--* Check LoRaWAN network signal strengh.
--* Manually send messages to LoRaWAN network.
--)))
++2.LA66 USB LoRaWAN Adapter  is registered with TTN
++===== Steps for usage =====
++1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
++2.Run the script and see the TTN
--==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
++[[image:image-20220602115852-3.png]]
--A USB to Type-C adapter is needed to connect to a Mobile phone.
--Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
++== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
--[[image:image-20220813174353-2.png||height="360" width="313"]]
++== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
--==== (% style="color:blue" %)**Download and Install App:**(%%) ====
++== Order Info ==
--[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
++Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
--[[image:image-20220813173738-1.png]]
++**XX**: The default frequency band
++* **AS923**: LoRaWAN AS923 band
++* **AU915**: LoRaWAN AU915 band
++* **EU433**: LoRaWAN EU433 band
++* **EU868**: LoRaWAN EU868 band
++* **KR920**: LoRaWAN KR920 band
++* **US915**: LoRaWAN US915 band
++* **IN865**: LoRaWAN IN865 band
++* **CN470**: LoRaWAN CN470 band
++* **PP**: Peer to Peer LoRa Protocol
++== Package Info ==
--==== (% style="color:blue" %)**Use of APP:**(%%) ====
++* LA66 USB LoRaWAN Adapter x 1
--
--Function and page introduction
--
--
--[[image:image-20220723113448-7.png||height="995" width="450"]]
--
--**Block Explain:**
--
--1.  Display LA66 USB LoRaWAN Module connection status
--
--2.  Check and reconnect
--
--3.  Turn send timestamps on or off
--
--4.  Display LoRaWan connection status
--
--5.  Check LoRaWan connection status
--
--6.  The RSSI value of the node when the ACK is received
--
--7.  Node's Signal Strength Icon
--
--8.  Configure Location Uplink Interval
--
--9.  AT command input box
--
--10.  Send Button:  Send input box info to LA66 USB Adapter
--
--11.  Output Log from LA66 USB adapter
--
--12.  clear log button
--
--13.  exit button
--
--
--
--LA66 USB LoRaWAN Module not connected
--
--
--[[image:image-20220723110520-5.png||height="677" width="508"]]
--
--
--
--Connect LA66 USB LoRaWAN Module
--
--[[image:image-20220723110626-6.png||height="681" width="511"]]
--
--
--
--=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
--
--
--(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
--
--
--[[image:image-20220723134549-8.png]]
--
--
--
--(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
--
--
--Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
--
--For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
--
--After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
--
--LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
--
--
--Example output in NodeRed is as below:
--
--[[image:image-20220723144339-1.png]]
--
--
--
--== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
--
--
--The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
--
--Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
--
--
--[[image:image-20220723150132-2.png]]
--
--
--
--= 2.  FAQ =
--
--
--== 2.1   How to Compile Source Code for LA66? ==
--
--
--Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
--
--
--
--= 3.  Order Info =
--
--
--**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
--
--
--(% style="color:blue" %)**XXX**(%%): The default frequency band
--
--* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
--* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
--* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
--* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
--* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
--* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
--* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
--* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
--* (% style="color:red" %)**PP**(%%):        Peer to Peer LoRa Protocol
--
--= 4.  Reference =
--
--
--* Hardware Design File for  LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
--* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
--

image-20220715000242-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-172.4 KB

Content

image-20220715000826-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-820.7 KB

Content

image-20220715001142-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-508.1 KB

Content

image-20220718094030-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-193.3 KB

Content

image-20220718094138-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-100.3 KB

Content

image-20220718094750-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-97.9 KB

Content

image-20220718094950-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-97.7 KB

Content

image-20220718095457-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-98.0 KB

Content

image-20220719093156-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-381.2 KB

Content

image-20220719093358-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-649.5 KB

Content

image-20220720111850-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-380.3 KB

Content

image-20220723100027-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-1.1 MB

Content

image-20220723100439-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-749.8 KB

Content

image-20220723102027-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-28.7 KB

Content

image-20220723104754-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-231.5 KB

Content

image-20220723110520-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-3.2 MB

Content

image-20220723110626-6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-3.6 MB

Content

image-20220723113448-7.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-298.5 KB

Content

image-20220723134549-8.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-392.3 KB

Content

image-20220723144339-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-324.7 KB

Content

image-20220723150132-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-698.8 KB

Content

image-20220723165950-1.jpeg

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-278.4 KB

Content

image-20220723170210-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-883.0 KB

Content

image-20220723170545-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-31.1 KB

Content

image-20220723170750-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-119.0 KB

Content

image-20220723171228-6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-34.2 KB

Content

image-20220723172235-7.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-262.3 KB

Content

image-20220723172502-8.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-112.0 KB

Content

image-20220723172938-9.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-104.8 KB

Content

image-20220723173341-10.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-117.9 KB

Content

image-20220723173950-11.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-121.9 KB

Content

image-20220723175700-12.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-96.4 KB

Content

image-20220726135239-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-91.4 KB

Content

image-20220726135356-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-45.6 KB

Content

image-20220813173738-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-13.2 KB

Content

image-20220813174353-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-189.1 KB

Content

image-20220813183239-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-642.4 KB

Content

image-20220814101457-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-913.4 KB

Content

image-20220817084245-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-317.6 KB

Content

image-20220817084532-1.jpeg

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-174.9 KB

Content

image-20220817093644-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-217.0 KB

Content

image-20220909151441-1.jpeg

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-152.4 KB

Content

image-20220909151517-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-64.3 KB

Content

Changes for page LA66 USB LoRaWAN Adapter User Manual

Summary

Details

Applications

Navigation