Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 154.1
edited by Bei Jinggeng
on 2022/09/09 15:19
Change comment: There is no comment for this version
To version 74.1
edited by Edwin Chen
on 2022/07/03 00:16
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Edwin
Content
... ... @@ -1,66 +1,41 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
9 9  
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 -
13 -
14 -== 1.1  Overview ==
15 -
16 -
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 -(((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 -)))
27 -
28 -(((
29 29  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 -)))
31 31  
32 -(((
33 33  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 -)))
35 35  
36 -(((
37 37  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 -)))
39 39  
40 40  
20 +== Features ==
41 41  
42 -== 1.2  Features ==
43 -
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
25 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
30 +* Ultra-long RF range
56 56  
57 -== 1.3  Specification ==
32 +== Specification ==
58 58  
59 -
60 60  * CPU: 32-bit 48 MHz
61 61  * Flash: 256KB
62 62  * RAM: 64KB
63 -* Input Power Range: 5v
37 +* Input Power Range: 1.8v ~~ 3.7v
38 +* Power Consumption: < 4uA.
64 64  * Frequency Range: 150 MHz ~~ 960 MHz
65 65  * Maximum Power +22 dBm constant RF output
66 66  * High sensitivity: -148 dBm
... ... @@ -72,351 +72,338 @@
72 72  ** Operating: 10 ~~ 95% (Non-Condensing)
73 73  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
74 74  * LoRa Rx current: <9 mA
50 +* I/O Voltage: 3.3v
75 75  
76 -== 1.4  Pin Mapping & LED ==
52 +== AT Command ==
77 77  
54 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
78 78  
79 -[[image:image-20220813183239-3.png||height="526" width="662"]]
80 80  
57 +== Dimension ==
81 81  
59 +[[image:image-20220517072526-1.png]]
82 82  
83 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
84 84  
62 +== Pin Mapping ==
85 85  
86 -(((
87 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
88 -)))
64 +[[image:image-20220523101537-1.png]]
89 89  
66 +== Land Pattern ==
90 90  
91 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
68 +[[image:image-20220517072821-2.png]]
92 92  
93 93  
94 -[[image:image-20220723100027-1.png]]
71 +== Order Info ==
95 95  
73 +Part Number: **LA66-XXX**
96 96  
97 -Open the serial port tool
75 +**XX**: The default frequency band
98 98  
99 -[[image:image-20220602161617-8.png]]
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
100 100  
101 -[[image:image-20220602161718-9.png||height="457" width="800"]]
87 += LA66 LoRaWAN Shield =
102 102  
89 +== Overview ==
103 103  
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
104 104  
105 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
106 106  
94 +== Features ==
107 107  
108 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
96 +* Arduino Shield base on LA66 LoRaWAN module
97 +* Support LoRaWAN v1.0.4 protocol
98 +* Support peer-to-peer protocol
99 +* TCXO crystal to ensure RF performance on low temperature
100 +* SMA connector
101 +* Available in different frequency LoRaWAN frequency bands.
102 +* World-wide unique OTAA keys.
103 +* AT Command via UART-TTL interface
104 +* Firmware upgradable via UART interface
105 +* Ultra-long RF range
109 109  
107 +== Specification ==
110 110  
111 -[[image:image-20220602161935-10.png||height="498" width="800"]]
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
112 112  
127 +== Pin Mapping & LED ==
113 113  
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
114 114  
115 -(% style="color:blue" %)**3. See Uplink Command**
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
116 116  
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
117 117  
118 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
119 119  
120 -example: AT+SENDB=01,02,8,05820802581ea0a5
137 +=== Items needed for update ===
121 121  
122 -[[image:image-20220602162157-11.png||height="497" width="800"]]
139 +1. LA66 LoRaWAN Shield
140 +1. Arduino
141 +1. USB TO TTL Adapter
123 123  
143 +[[image:image-20220602100052-2.png||height="341" width="531"]]
124 124  
125 125  
126 -(% style="color:blue" %)**4. Check to see if TTN received the message**
146 +=== Connection ===
127 127  
148 +[[image:image-20220602101311-3.png||height="350" width="760"]]
128 128  
129 -[[image:image-20220817093644-1.png]]
130 130  
151 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-----> (% style="color:blue" %)**USB TTL(%%)
152 +GND  <-----> GND
153 +TXD  <-----> TXD
154 +RXD  <-----> RXD
131 131  
156 +JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
132 132  
133 -== 1.6  Example: How to join helium ==
158 +Connect to the PC after connecting the wires
134 134  
135 -(% style="color:blue" %)**1. Create a new device.**
136 136  
137 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
138 138  
162 +[[image:image-20220602102240-4.png]]
139 139  
140 -(% style="color:blue" %)**2. Save the device after filling in the necessary information.**
164 +=== Upgrade steps ===
141 141  
142 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
166 +==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
143 143  
168 +[[image:image-20220602102824-5.png]]
144 144  
145 -(% style="color:blue" %)**3.  Use AT commands.**
170 +==== Press the RST switch on the LA66 LoRaWAN Shield once ====
146 146  
147 -[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
172 +[[image:image-20220602104701-12.png]]
148 148  
174 +==== Open the upgrade application software ====
149 149  
150 -(% style="color:blue" %)**4..  Use the serial port tool**
176 +Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
151 151  
152 -[[image:image-20220909151517-2.png||height="543" width="708"]]
178 +[[image:image-20220602103227-6.png]]
153 153  
180 +[[image:image-20220602103357-7.png]]
154 154  
155 -(% style="color:blue" %)**5.Use command AT+CFG to get device configuration**
182 +===== Select the COM port corresponding to USB TTL =====
156 156  
157 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
184 +[[image:image-20220602103844-8.png]]
158 158  
186 +===== Select the bin file to burn =====
159 159  
160 -(% style="color:blue" %)**6.  Network successfully.**
188 +[[image:image-20220602104144-9.png]]
161 161  
162 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
190 +[[image:image-20220602104251-10.png]]
163 163  
192 +[[image:image-20220602104402-11.png]]
164 164  
165 -(% style="color:blue" %)**7.  Send uplink using command**
194 +===== Click to start the download =====
166 166  
167 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170659-5.png?rev=1.1||alt="image-20220907170659-5.png"]]
196 +[[image:image-20220602104923-13.png]]
168 168  
169 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
198 +===== The following figure appears to prove that the burning is in progress =====
170 170  
200 +[[image:image-20220602104948-14.png]]
171 171  
172 -== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
202 +===== The following picture appears to prove that the burning is successful =====
173 173  
204 +[[image:image-20220602105251-15.png]]
174 174  
175 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
176 176  
177 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
207 +== Order Info ==
178 178  
209 +Part Number: **LA66-LoRaWAN-Shield-XXX**
179 179  
180 -(% style="color:red" %)**Preconditions:**
211 +**XX**: The default frequency band
181 181  
182 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
213 +* **AS923**: LoRaWAN AS923 band
214 +* **AU915**: LoRaWAN AU915 band
215 +* **EU433**: LoRaWAN EU433 band
216 +* **EU868**: LoRaWAN EU868 band
217 +* **KR920**: LoRaWAN KR920 band
218 +* **US915**: LoRaWAN US915 band
219 +* **IN865**: LoRaWAN IN865 band
220 +* **CN470**: LoRaWAN CN470 band
221 +* **PP**: Peer to Peer LoRa Protocol
183 183  
184 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
223 +== Package Info ==
185 185  
225 +* LA66 LoRaWAN Shield x 1
226 +* RF Antenna x 1
186 186  
187 187  
188 -(% style="color:blue" %)**Steps for usage:**
189 189  
190 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
230 += LA66 USB LoRaWAN Adapter =
191 191  
192 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
232 +== Overview ==
193 193  
234 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
194 194  
195 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
196 196  
237 +== Features ==
197 197  
239 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
240 +* Ultra-long RF range
241 +* Support LoRaWAN v1.0.4 protocol
242 +* Support peer-to-peer protocol
243 +* TCXO crystal to ensure RF performance on low temperature
244 +* Spring RF antenna
245 +* Available in different frequency LoRaWAN frequency bands.
246 +* World-wide unique OTAA keys.
247 +* AT Command via UART-TTL interface
248 +* Firmware upgradable via UART interface
198 198  
199 -== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
200 200  
251 +== Specification ==
201 201  
202 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
253 +* CPU: 32-bit 48 MHz
254 +* Flash: 256KB
255 +* RAM: 64KB
256 +* Input Power Range: 5v
257 +* Frequency Range: 150 MHz ~~ 960 MHz
258 +* Maximum Power +22 dBm constant RF output
259 +* High sensitivity: -148 dBm
260 +* Temperature:
261 +** Storage: -55 ~~ +125℃
262 +** Operating: -40 ~~ +85℃
263 +* Humidity:
264 +** Storage: 5 ~~ 95% (Non-Condensing)
265 +** Operating: 10 ~~ 95% (Non-Condensing)
266 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
267 +* LoRa Rx current: <9 mA
203 203  
204 204  
205 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
270 +== Pin Mapping & LED ==
206 206  
272 +== Example Send & Get Messages via LoRaWAN in PC ==
207 207  
208 -[[image:image-20220723100439-2.png]]
274 +Connect the LA66 LoRa Shield to the PC
209 209  
276 +[[image:image-20220602171217-1.png||height="615" width="915"]]
210 210  
278 +Open the serial port tool
211 211  
212 -(% style="color:blue" %)**2. Install Minicom in RPi.**
280 +[[image:image-20220602161617-8.png]]
213 213  
282 +[[image:image-20220602161718-9.png||height="529" width="927"]]
214 214  
215 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
284 +Press the reset switch RST on the LA66 LoRa Shield.
216 216  
217 - (% style="background-color:yellow" %)**apt update**
286 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
218 218  
219 - (% style="background-color:yellow" %)**apt install minicom**
288 +[[image:image-20220602161935-10.png]]
220 220  
290 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
221 221  
222 -Use minicom to connect to the RPI's terminal
292 +example: AT+SENDB=01,02,8,05820802581ea0a5
223 223  
224 -[[image:image-20220602153146-3.png||height="439" width="500"]]
294 +[[image:image-20220602162157-11.png]]
225 225  
296 +Check to see if TTN received the message
226 226  
298 +[[image:image-20220602162331-12.png||height="547" width="1044"]]
227 227  
228 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
300 +== Example Send & Get Messages via LoRaWAN in RPi ==
229 229  
302 +Connect the LA66 LoRa Shield to the RPI
230 230  
231 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
304 +[[image:image-20220602171233-2.png||height="592" width="881"]]
232 232  
306 +Log in to the RPI's terminal and connect to the serial port
233 233  
234 -[[image:image-20220602154928-5.png||height="436" width="500"]]
308 +[[image:image-20220602153146-3.png]]
235 235  
310 +Press the reset switch RST on the LA66 LoRa Shield.
311 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
236 236  
313 +[[image:image-20220602154928-5.png]]
237 237  
238 -(% style="color:blue" %)**4. Send Uplink message**
315 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
239 239  
240 -
241 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
242 -
243 243  example: AT+SENDB=01,02,8,05820802581ea0a5
244 244  
319 +[[image:image-20220602160339-6.png]]
245 245  
246 -[[image:image-20220602160339-6.png||height="517" width="600"]]
247 -
248 -
249 -
250 250  Check to see if TTN received the message
251 251  
252 -[[image:image-20220602160627-7.png||height="369" width="800"]]
323 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
253 253  
325 +=== Install Minicom ===
254 254  
327 +Enter the following command in the RPI terminal
255 255  
256 -== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
329 +apt update
257 257  
331 +[[image:image-20220602143155-1.png]]
258 258  
259 -=== 1.8.1  Hardware and Software Connection ===
333 +apt install minicom
260 260  
335 +[[image:image-20220602143744-2.png]]
261 261  
337 +=== Send PC's CPU/RAM usage to TTN via script. ===
262 262  
263 -==== (% style="color:blue" %)**Overview：**(%%) ====
339 +==== Take python as an example： ====
264 264  
341 +===== Preconditions: =====
265 265  
266 -(((
267 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
343 +1.LA66 USB LoRaWAN Adapter works fine
268 268  
269 -* Send real-time location information of mobile phone to LoRaWAN network.
270 -* Check LoRaWAN network signal strengh.
271 -* Manually send messages to LoRaWAN network.
272 -)))
345 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
273 273  
347 +===== Steps for usage =====
274 274  
349 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
275 275  
351 +2.Run the script and see the TTN
276 276  
277 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
353 +[[image:image-20220602115852-3.png]]
278 278  
279 279  
280 -A USB to Type-C adapter is needed to connect to a Mobile phone.
281 281  
282 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
357 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
283 283  
284 -[[image:image-20220813174353-2.png||height="360" width="313"]]
285 285  
360 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
286 286  
287 287  
288 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
289 289  
364 +== Order Info ==
290 290  
291 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
366 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
292 292  
293 -[[image:image-20220813173738-1.png]]
368 +**XX**: The default frequency band
294 294  
370 +* **AS923**: LoRaWAN AS923 band
371 +* **AU915**: LoRaWAN AU915 band
372 +* **EU433**: LoRaWAN EU433 band
373 +* **EU868**: LoRaWAN EU868 band
374 +* **KR920**: LoRaWAN KR920 band
375 +* **US915**: LoRaWAN US915 band
376 +* **IN865**: LoRaWAN IN865 band
377 +* **CN470**: LoRaWAN CN470 band
378 +* **PP**: Peer to Peer LoRa Protocol
295 295  
380 +== Package Info ==
296 296  
297 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
382 +* LA66 USB LoRaWAN Adapter x 1
298 298  
299 -
300 -Function and page introduction
301 -
302 -
303 -[[image:image-20220723113448-7.png||height="995" width="450"]]
304 -
305 -**Block Explain:**
306 -
307 -1.  Display LA66 USB LoRaWAN Module connection status
308 -
309 -2.  Check and reconnect
310 -
311 -3.  Turn send timestamps on or off
312 -
313 -4.  Display LoRaWan connection status
314 -
315 -5.  Check LoRaWan connection status
316 -
317 -6.  The RSSI value of the node when the ACK is received
318 -
319 -7.  Node's Signal Strength Icon
320 -
321 -8.  Configure Location Uplink Interval
322 -
323 -9.  AT command input box
324 -
325 -10.  Send Button:  Send input box info to LA66 USB Adapter
326 -
327 -11.  Output Log from LA66 USB adapter
328 -
329 -12.  clear log button
330 -
331 -13.  exit button
332 -
333 -
334 -
335 -LA66 USB LoRaWAN Module not connected
336 -
337 -
338 -[[image:image-20220723110520-5.png||height="677" width="508"]]
339 -
340 -
341 -
342 -Connect LA66 USB LoRaWAN Module
343 -
344 -[[image:image-20220723110626-6.png||height="681" width="511"]]
345 -
346 -
347 -
348 -=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
349 -
350 -
351 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
352 -
353 -
354 -[[image:image-20220723134549-8.png]]
355 -
356 -
357 -
358 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
359 -
360 -
361 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
362 -
363 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
364 -
365 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
366 -
367 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
368 -
369 -
370 -Example output in NodeRed is as below:
371 -
372 -[[image:image-20220723144339-1.png]]
373 -
374 -
375 -
376 -== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
377 -
378 -
379 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
380 -
381 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
382 -
383 -
384 -[[image:image-20220723150132-2.png]]
385 -
386 -
387 -
388 -= 2.  FAQ =
389 -
390 -
391 -== 2.1  How to Compile Source Code for LA66? ==
392 -
393 -
394 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
395 -
396 -
397 -
398 -= 3.  Order Info =
399 -
400 -
401 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
402 -
403 -
404 -(% style="color:blue" %)**XXX**(%%): The default frequency band
405 -
406 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
407 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
408 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
409 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
410 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
411 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
412 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
413 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
414 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
415 -
416 -= 4.  Reference =
417 -
418 -
419 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
420 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
421 -
422 422  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content