Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 153.1
edited by Bei Jinggeng
on 2022/09/09 15:15
Change comment: Uploaded new attachment "image-20220909151517-2.png", version {1}
To version 73.1
edited by Edwin Chen
on 2022/07/03 00:12
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Edwin
Content
... ... @@ -1,66 +1,41 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
9 9  
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 -
13 -
14 -== 1.1  Overview ==
15 -
16 -
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 -(((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 -)))
27 -
28 -(((
29 29  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 -)))
31 31  
32 -(((
33 33  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 -)))
35 35  
36 -(((
37 37  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 -)))
39 39  
40 40  
20 +== Features ==
41 41  
42 -== 1.2  Features ==
43 -
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
25 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
30 +* Ultra-long RF range
56 56  
57 -== 1.3  Specification ==
32 +== Specification ==
58 58  
59 -
60 60  * CPU: 32-bit 48 MHz
61 61  * Flash: 256KB
62 62  * RAM: 64KB
63 -* Input Power Range: 5v
37 +* Input Power Range: 1.8v ~~ 3.7v
38 +* Power Consumption: < 4uA.
64 64  * Frequency Range: 150 MHz ~~ 960 MHz
65 65  * Maximum Power +22 dBm constant RF output
66 66  * High sensitivity: -148 dBm
... ... @@ -72,313 +72,342 @@
72 72  ** Operating: 10 ~~ 95% (Non-Condensing)
73 73  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
74 74  * LoRa Rx current: <9 mA
50 +* I/O Voltage: 3.3v
75 75  
76 -== 1.4  Pin Mapping & LED ==
52 +== AT Command ==
77 77  
54 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
78 78  
79 -[[image:image-20220813183239-3.png||height="526" width="662"]]
80 80  
57 +== Dimension ==
81 81  
59 +[[image:image-20220517072526-1.png]]
82 82  
83 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
84 84  
62 +== Pin Mapping ==
85 85  
86 -(((
87 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
88 -)))
64 +[[image:image-20220523101537-1.png]]
89 89  
66 +== Land Pattern ==
90 90  
91 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
68 +[[image:image-20220517072821-2.png]]
92 92  
93 93  
94 -[[image:image-20220723100027-1.png]]
71 +== Order Info ==
95 95  
73 +Part Number: **LA66-XXX**
96 96  
97 -Open the serial port tool
75 +**XX**: The default frequency band
98 98  
99 -[[image:image-20220602161617-8.png]]
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
100 100  
101 -[[image:image-20220602161718-9.png||height="457" width="800"]]
87 += LA66 LoRaWAN Shield =
102 102  
89 +== Overview ==
103 103  
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
104 104  
105 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
106 106  
94 +== Features ==
107 107  
108 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
96 +* Arduino Shield base on LA66 LoRaWAN module
97 +* Support LoRaWAN v1.0.4 protocol
98 +* Support peer-to-peer protocol
99 +* TCXO crystal to ensure RF performance on low temperature
100 +* SMA connector
101 +* Available in different frequency LoRaWAN frequency bands.
102 +* World-wide unique OTAA keys.
103 +* AT Command via UART-TTL interface
104 +* Firmware upgradable via UART interface
105 +* Ultra-long RF range
109 109  
107 +== Specification ==
110 110  
111 -[[image:image-20220602161935-10.png||height="498" width="800"]]
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
112 112  
127 +== Pin Mapping & LED ==
113 113  
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
114 114  
115 -(% style="color:blue" %)**3. See Uplink Command**
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
116 116  
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
117 117  
118 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
119 119  
120 -example: AT+SENDB=01,02,8,05820802581ea0a5
137 +=== what needs to be used ===
121 121  
122 -[[image:image-20220602162157-11.png||height="497" width="800"]]
139 +1.LA66 LoRaWAN Shield that needs to be upgraded
123 123  
141 +2.Arduino
124 124  
143 +3.USB TO TTL
125 125  
126 -(% style="color:blue" %)**4. Check to see if TTN received the message**
145 +[[image:image-20220602100052-2.png]]
127 127  
147 +=== Wiring Schematic ===
128 128  
129 -[[image:image-20220817093644-1.png]]
149 +[[image:image-20220602101311-3.png]]
130 130  
151 +LA66 LoRaWAN Shield  >>>>>>>>>>>>USB TTL
131 131  
153 +GND  >>>>>>>>>>>>GND
132 132  
133 -== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
155 +TXD  >>>>>>>>>>>>TXD
134 134  
157 +RXD  >>>>>>>>>>>>RXD
135 135  
136 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
159 +JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
137 137  
138 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
161 +Connect to the PC after connecting the wires
139 139  
163 +[[image:image-20220602102240-4.png]]
140 140  
141 -(% style="color:red" %)**Preconditions:**
165 +=== Upgrade steps ===
142 142  
143 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
167 +==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
144 144  
145 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
169 +[[image:image-20220602102824-5.png]]
146 146  
171 +==== Press the RST switch on the LA66 LoRaWAN Shield once ====
147 147  
173 +[[image:image-20220602104701-12.png]]
148 148  
149 -(% style="color:blue" %)**Steps for usage:**
175 +==== Open the upgrade application software ====
150 150  
151 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
177 +Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
152 152  
153 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
179 +[[image:image-20220602103227-6.png]]
154 154  
181 +[[image:image-20220602103357-7.png]]
155 155  
156 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
183 +===== Select the COM port corresponding to USB TTL =====
157 157  
185 +[[image:image-20220602103844-8.png]]
158 158  
187 +===== Select the bin file to burn =====
159 159  
160 -== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
189 +[[image:image-20220602104144-9.png]]
161 161  
191 +[[image:image-20220602104251-10.png]]
162 162  
163 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
193 +[[image:image-20220602104402-11.png]]
164 164  
195 +===== Click to start the download =====
165 165  
166 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
197 +[[image:image-20220602104923-13.png]]
167 167  
199 +===== The following figure appears to prove that the burning is in progress =====
168 168  
169 -[[image:image-20220723100439-2.png]]
201 +[[image:image-20220602104948-14.png]]
170 170  
203 +===== The following picture appears to prove that the burning is successful =====
171 171  
205 +[[image:image-20220602105251-15.png]]
172 172  
173 -(% style="color:blue" %)**2. Install Minicom in RPi.**
174 174  
208 +== Order Info ==
175 175  
176 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
210 +Part Number: **LA66-LoRaWAN-Shield-XXX**
177 177  
178 - (% style="background-color:yellow" %)**apt update**
212 +**XX**: The default frequency band
179 179  
180 - (% style="background-color:yellow" %)**apt install minicom**
214 +* **AS923**: LoRaWAN AS923 band
215 +* **AU915**: LoRaWAN AU915 band
216 +* **EU433**: LoRaWAN EU433 band
217 +* **EU868**: LoRaWAN EU868 band
218 +* **KR920**: LoRaWAN KR920 band
219 +* **US915**: LoRaWAN US915 band
220 +* **IN865**: LoRaWAN IN865 band
221 +* **CN470**: LoRaWAN CN470 band
222 +* **PP**: Peer to Peer LoRa Protocol
181 181  
224 +== Package Info ==
182 182  
183 -Use minicom to connect to the RPI's terminal
226 +* LA66 LoRaWAN Shield x 1
227 +* RF Antenna x 1
184 184  
185 -[[image:image-20220602153146-3.png||height="439" width="500"]]
186 186  
187 187  
188 188  
189 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
232 += LA66 USB LoRaWAN Adapter =
190 190  
234 +== Overview ==
191 191  
192 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
236 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
193 193  
194 194  
195 -[[image:image-20220602154928-5.png||height="436" width="500"]]
239 +== Features ==
196 196  
241 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
242 +* Ultra-long RF range
243 +* Support LoRaWAN v1.0.4 protocol
244 +* Support peer-to-peer protocol
245 +* TCXO crystal to ensure RF performance on low temperature
246 +* Spring RF antenna
247 +* Available in different frequency LoRaWAN frequency bands.
248 +* World-wide unique OTAA keys.
249 +* AT Command via UART-TTL interface
250 +* Firmware upgradable via UART interface
197 197  
198 198  
199 -(% style="color:blue" %)**4. Send Uplink message**
200 200  
254 +== Specification ==
201 201  
202 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
256 +* CPU: 32-bit 48 MHz
257 +* Flash: 256KB
258 +* RAM: 64KB
259 +* Input Power Range: 5v
260 +* Frequency Range: 150 MHz ~~ 960 MHz
261 +* Maximum Power +22 dBm constant RF output
262 +* High sensitivity: -148 dBm
263 +* Temperature:
264 +** Storage: -55 ~~ +125℃
265 +** Operating: -40 ~~ +85℃
266 +* Humidity:
267 +** Storage: 5 ~~ 95% (Non-Condensing)
268 +** Operating: 10 ~~ 95% (Non-Condensing)
269 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
270 +* LoRa Rx current: <9 mA
203 203  
204 -example: AT+SENDB=01,02,8,05820802581ea0a5
205 205  
206 206  
207 -[[image:image-20220602160339-6.png||height="517" width="600"]]
274 +== Pin Mapping & LED ==
208 208  
276 +== Example Send & Get Messages via LoRaWAN in PC ==
209 209  
278 +Connect the LA66 LoRa Shield to the PC
210 210  
211 -Check to see if TTN received the message
280 +[[image:image-20220602171217-1.png||height="615" width="915"]]
212 212  
213 -[[image:image-20220602160627-7.png||height="369" width="800"]]
282 +Open the serial port tool
214 214  
284 +[[image:image-20220602161617-8.png]]
215 215  
286 +[[image:image-20220602161718-9.png||height="529" width="927"]]
216 216  
217 -== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
288 +Press the reset switch RST on the LA66 LoRa Shield.
218 218  
290 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
219 219  
220 -=== 1.8.1  Hardware and Software Connection ===
292 +[[image:image-20220602161935-10.png]]
221 221  
294 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
222 222  
296 +example: AT+SENDB=01,02,8,05820802581ea0a5
223 223  
224 -==== (% style="color:blue" %)**Overview：**(%%) ====
298 +[[image:image-20220602162157-11.png]]
225 225  
300 +Check to see if TTN received the message
226 226  
227 -(((
228 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
302 +[[image:image-20220602162331-12.png||height="547" width="1044"]]
229 229  
230 -* Send real-time location information of mobile phone to LoRaWAN network.
231 -* Check LoRaWAN network signal strengh.
232 -* Manually send messages to LoRaWAN network.
233 -)))
304 +== Example Send & Get Messages via LoRaWAN in RPi ==
234 234  
306 +Connect the LA66 LoRa Shield to the RPI
235 235  
308 +[[image:image-20220602171233-2.png||height="592" width="881"]]
236 236  
310 +Log in to the RPI's terminal and connect to the serial port
237 237  
238 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
312 +[[image:image-20220602153146-3.png]]
239 239  
314 +Press the reset switch RST on the LA66 LoRa Shield.
315 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
240 240  
241 -A USB to Type-C adapter is needed to connect to a Mobile phone.
317 +[[image:image-20220602154928-5.png]]
242 242  
243 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
319 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
244 244  
245 -[[image:image-20220813174353-2.png||height="360" width="313"]]
321 +example: AT+SENDB=01,02,8,05820802581ea0a5
246 246  
323 +[[image:image-20220602160339-6.png]]
247 247  
325 +Check to see if TTN received the message
248 248  
249 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
327 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
250 250  
329 +=== Install Minicom ===
251 251  
252 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
331 +Enter the following command in the RPI terminal
253 253  
254 -[[image:image-20220813173738-1.png]]
333 +apt update
255 255  
335 +[[image:image-20220602143155-1.png]]
256 256  
337 +apt install minicom
257 257  
258 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
339 +[[image:image-20220602143744-2.png]]
259 259  
341 +=== Send PC's CPU/RAM usage to TTN via script. ===
260 260  
261 -Function and page introduction
343 +==== Take python as an example： ====
262 262  
345 +===== Preconditions: =====
263 263  
264 -[[image:image-20220723113448-7.png||height="995" width="450"]]
347 +1.LA66 USB LoRaWAN Adapter works fine
265 265  
266 -**Block Explain:**
349 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
267 267  
268 -1.  Display LA66 USB LoRaWAN Module connection status
351 +===== Steps for usage =====
269 269  
270 -2.  Check and reconnect
353 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
271 271  
272 -3.  Turn send timestamps on or off
355 +2.Run the script and see the TTN
273 273  
274 -4.  Display LoRaWan connection status
357 +[[image:image-20220602115852-3.png]]
275 275  
276 -5.  Check LoRaWan connection status
277 277  
278 -6.  The RSSI value of the node when the ACK is received
279 279  
280 -7.  Node's Signal Strength Icon
361 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
281 281  
282 -8.  Configure Location Uplink Interval
283 283  
284 -9.  AT command input box
364 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
285 285  
286 -10.  Send Button:  Send input box info to LA66 USB Adapter
287 287  
288 -11.  Output Log from LA66 USB adapter
289 289  
290 -12.  clear log button
368 +== Order Info ==
291 291  
292 -13.  exit button
370 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
293 293  
372 +**XX**: The default frequency band
294 294  
374 +* **AS923**: LoRaWAN AS923 band
375 +* **AU915**: LoRaWAN AU915 band
376 +* **EU433**: LoRaWAN EU433 band
377 +* **EU868**: LoRaWAN EU868 band
378 +* **KR920**: LoRaWAN KR920 band
379 +* **US915**: LoRaWAN US915 band
380 +* **IN865**: LoRaWAN IN865 band
381 +* **CN470**: LoRaWAN CN470 band
382 +* **PP**: Peer to Peer LoRa Protocol
295 295  
296 -LA66 USB LoRaWAN Module not connected
384 +== Package Info ==
297 297  
386 +* LA66 USB LoRaWAN Adapter x 1
298 298  
299 -[[image:image-20220723110520-5.png||height="677" width="508"]]
300 -
301 -
302 -
303 -Connect LA66 USB LoRaWAN Module
304 -
305 -[[image:image-20220723110626-6.png||height="681" width="511"]]
306 -
307 -
308 -
309 -=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
310 -
311 -
312 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
313 -
314 -
315 -[[image:image-20220723134549-8.png]]
316 -
317 -
318 -
319 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
320 -
321 -
322 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
323 -
324 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
325 -
326 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
327 -
328 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
329 -
330 -
331 -Example output in NodeRed is as below:
332 -
333 -[[image:image-20220723144339-1.png]]
334 -
335 -
336 -
337 -== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
338 -
339 -
340 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
341 -
342 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
343 -
344 -
345 -[[image:image-20220723150132-2.png]]
346 -
347 -
348 -
349 -= 2.  FAQ =
350 -
351 -
352 -== 2.1  How to Compile Source Code for LA66? ==
353 -
354 -
355 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
356 -
357 -
358 -
359 -= 3.  Order Info =
360 -
361 -
362 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
363 -
364 -
365 -(% style="color:blue" %)**XXX**(%%): The default frequency band
366 -
367 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
368 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
369 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
370 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
371 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
372 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
373 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
374 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
375 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
376 -
377 -
378 -= 4.  Reference =
379 -
380 -
381 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
382 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
383 -
384 384  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content