Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 151.1
edited by Bei Jinggeng
on 2022/09/09 15:00
Change comment: There is no comment for this version
To version 87.12
edited by Xiaoling
on 2022/07/13 10:04
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Xiaoling
Content
... ... @@ -1,66 +1,46 @@
1 1  
2 2  
3 -**Table of Contents:**
4 -
5 5  {{toc/}}
6 6  
7 7  
8 8  
7 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
10 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
13 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
15 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 16  
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 -(((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 -)))
27 -
28 -(((
29 29  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 -)))
31 31  
32 -(((
33 33  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 -)))
35 35  
36 -(((
37 37  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 -)))
39 39  
40 40  
41 -
42 42  == 1.2  Features ==
43 43  
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
29 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
34 +* Ultra-long RF range
56 56  
36 +
57 57  == 1.3  Specification ==
58 58  
59 -
60 60  * CPU: 32-bit 48 MHz
61 61  * Flash: 256KB
62 62  * RAM: 64KB
63 -* Input Power Range: 5v
42 +* Input Power Range: 1.8v ~~ 3.7v
43 +* Power Consumption: < 4uA.
64 64  * Frequency Range: 150 MHz ~~ 960 MHz
65 65  * Maximum Power +22 dBm constant RF output
66 66  * High sensitivity: -148 dBm
... ... @@ -72,296 +72,381 @@
72 72  ** Operating: 10 ~~ 95% (Non-Condensing)
73 73  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
74 74  * LoRa Rx current: <9 mA
55 +* I/O Voltage: 3.3v
75 75  
76 -== 1.4  Pin Mapping & LED ==
77 77  
58 +== 1.4  AT Command ==
78 78  
79 -[[image:image-20220813183239-3.png||height="526" width="662"]]
60 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
80 80  
81 81  
63 +== 1.5  Dimension ==
82 82  
83 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
65 +[[image:image-20220517072526-1.png]]
84 84  
85 85  
86 -(((
87 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
88 -)))
89 89  
69 +== 1.6  Pin Mapping ==
90 90  
91 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
92 92  
72 +[[image:image-20220523101537-1.png]]
93 93  
94 -[[image:image-20220723100027-1.png]]
95 95  
96 96  
97 -Open the serial port tool
76 +== 1.7  Land Pattern ==
98 98  
99 -[[image:image-20220602161617-8.png]]
78 +[[image:image-20220517072821-2.png]]
100 100  
101 -[[image:image-20220602161718-9.png||height="457" width="800"]]
102 102  
103 103  
82 += 2.  LA66 LoRaWAN Shield =
104 104  
105 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
106 106  
85 +== 2.1  Overview ==
107 107  
108 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
87 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
109 109  
110 110  
111 -[[image:image-20220602161935-10.png||height="498" width="800"]]
90 +== 2.2  Features ==
112 112  
92 +* Arduino Shield base on LA66 LoRaWAN module
93 +* Support LoRaWAN v1.0.4 protocol
94 +* Support peer-to-peer protocol
95 +* TCXO crystal to ensure RF performance on low temperature
96 +* SMA connector
97 +* Available in different frequency LoRaWAN frequency bands.
98 +* World-wide unique OTAA keys.
99 +* AT Command via UART-TTL interface
100 +* Firmware upgradable via UART interface
101 +* Ultra-long RF range
113 113  
114 114  
115 -(% style="color:blue" %)**3. See Uplink Command**
104 +== 2.3  Specification ==
116 116  
106 +* CPU: 32-bit 48 MHz
107 +* Flash: 256KB
108 +* RAM: 64KB
109 +* Input Power Range: 1.8v ~~ 3.7v
110 +* Power Consumption: < 4uA.
111 +* Frequency Range: 150 MHz ~~ 960 MHz
112 +* Maximum Power +22 dBm constant RF output
113 +* High sensitivity: -148 dBm
114 +* Temperature:
115 +** Storage: -55 ~~ +125℃
116 +** Operating: -40 ~~ +85℃
117 +* Humidity:
118 +** Storage: 5 ~~ 95% (Non-Condensing)
119 +** Operating: 10 ~~ 95% (Non-Condensing)
120 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
121 +* LoRa Rx current: <9 mA
122 +* I/O Voltage: 3.3v
117 117  
118 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
119 119  
120 -example: AT+SENDB=01,02,8,05820802581ea0a5
125 +== 2.4  Pin Mapping & LED ==
121 121  
122 -[[image:image-20220602162157-11.png||height="497" width="800"]]
123 123  
124 124  
129 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
125 125  
126 -(% style="color:blue" %)**4. Check to see if TTN received the message**
127 127  
128 128  
129 -[[image:image-20220817093644-1.png]]
133 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
130 130  
131 131  
132 132  
133 -== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
137 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
134 134  
135 135  
136 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
137 137  
138 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
141 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
139 139  
140 140  
141 -(% style="color:red" %)**Preconditions:**
144 +=== 2.8.1  Items needed for update ===
142 142  
143 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
146 +1. LA66 LoRaWAN Shield
147 +1. Arduino
148 +1. USB TO TTL Adapter
144 144  
145 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
150 +[[image:image-20220602100052-2.png||height="385" width="600"]]
146 146  
147 147  
153 +=== 2.8.2  Connection ===
148 148  
149 -(% style="color:blue" %)**Steps for usage:**
150 150  
151 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
156 +[[image:image-20220602101311-3.png||height="276" width="600"]]
152 152  
153 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
154 154  
159 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
155 155  
156 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
161 +(% style="background-color:yellow" %)**GND  <-> GND
162 +TXD  <->  TXD
163 +RXD  <->  RXD**
157 157  
158 158  
166 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
159 159  
160 -== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
168 +Connect USB TTL Adapter to PC after connecting the wires
161 161  
162 162  
163 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
171 +[[image:image-20220602102240-4.png||height="304" width="600"]]
164 164  
165 165  
166 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
174 +=== 2.8.3  Upgrade steps ===
167 167  
168 168  
169 -[[image:image-20220723100439-2.png]]
177 +==== 1.  Switch SW1 to put in ISP position ====
170 170  
171 171  
180 +[[image:image-20220602102824-5.png||height="306" width="600"]]
172 172  
173 -(% style="color:blue" %)**2. Install Minicom in RPi.**
174 174  
175 175  
176 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
184 +==== 2.  Press the RST switch once ====
177 177  
178 - (% style="background-color:yellow" %)**apt update**
179 179  
180 - (% style="background-color:yellow" %)**apt install minicom**
187 +[[image:image-20220602104701-12.png||height="285" width="600"]]
181 181  
182 182  
183 -Use minicom to connect to the RPI's terminal
184 184  
185 -[[image:image-20220602153146-3.png||height="439" width="500"]]
191 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
186 186  
187 187  
194 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
188 188  
189 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
190 190  
197 +[[image:image-20220602103227-6.png]]
191 191  
192 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
193 193  
200 +[[image:image-20220602103357-7.png]]
194 194  
195 -[[image:image-20220602154928-5.png||height="436" width="500"]]
196 196  
197 197  
204 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
205 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
198 198  
199 -(% style="color:blue" %)**4. Send Uplink message**
200 200  
208 +[[image:image-20220602103844-8.png]]
201 201  
202 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
203 203  
204 -example: AT+SENDB=01,02,8,05820802581ea0a5
205 205  
212 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
213 +(% style="color:blue" %)**3. Select the bin file to burn**
206 206  
207 -[[image:image-20220602160339-6.png||height="517" width="600"]]
208 208  
216 +[[image:image-20220602104144-9.png]]
209 209  
210 210  
211 -Check to see if TTN received the message
219 +[[image:image-20220602104251-10.png]]
212 212  
213 -[[image:image-20220602160627-7.png||height="369" width="800"]]
214 214  
222 +[[image:image-20220602104402-11.png]]
215 215  
216 216  
217 -== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
218 218  
226 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
227 +(% style="color:blue" %)**4. Click to start the download**
219 219  
220 -=== 1.8.1  Hardware and Software Connection ===
229 +[[image:image-20220602104923-13.png]]
221 221  
222 222  
223 223  
224 -==== (% style="color:blue" %)**Overview：**(%%) ====
233 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
234 +(% style="color:blue" %)**5. Check update process**
225 225  
226 226  
227 -(((
228 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
237 +[[image:image-20220602104948-14.png]]
229 229  
230 -* Send real-time location information of mobile phone to LoRaWAN network.
231 -* Check LoRaWAN network signal strengh.
232 -* Manually send messages to LoRaWAN network.
233 -)))
234 234  
235 235  
241 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
242 +(% style="color:blue" %)**The following picture shows that the burning is successful**
236 236  
244 +[[image:image-20220602105251-15.png]]
237 237  
238 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
239 239  
240 240  
241 -A USB to Type-C adapter is needed to connect to a Mobile phone.
248 += 3.  LA66 USB LoRaWAN Adapter =
242 242  
243 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
244 244  
245 -[[image:image-20220813174353-2.png||height="360" width="313"]]
251 +== 3.1  Overview ==
246 246  
253 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
247 247  
248 248  
249 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
256 +== 3.2  Features ==
250 250  
258 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
259 +* Ultra-long RF range
260 +* Support LoRaWAN v1.0.4 protocol
261 +* Support peer-to-peer protocol
262 +* TCXO crystal to ensure RF performance on low temperature
263 +* Spring RF antenna
264 +* Available in different frequency LoRaWAN frequency bands.
265 +* World-wide unique OTAA keys.
266 +* AT Command via UART-TTL interface
267 +* Firmware upgradable via UART interface
251 251  
252 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
253 253  
254 -[[image:image-20220813173738-1.png]]
270 +== 3.3  Specification ==
255 255  
272 +* CPU: 32-bit 48 MHz
273 +* Flash: 256KB
274 +* RAM: 64KB
275 +* Input Power Range: 5v
276 +* Frequency Range: 150 MHz ~~ 960 MHz
277 +* Maximum Power +22 dBm constant RF output
278 +* High sensitivity: -148 dBm
279 +* Temperature:
280 +** Storage: -55 ~~ +125℃
281 +** Operating: -40 ~~ +85℃
282 +* Humidity:
283 +** Storage: 5 ~~ 95% (Non-Condensing)
284 +** Operating: 10 ~~ 95% (Non-Condensing)
285 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
286 +* LoRa Rx current: <9 mA
256 256  
257 257  
258 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
289 +== 3.4  Pin Mapping & LED ==
259 259  
260 260  
261 -Function and page introduction
262 262  
293 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
263 263  
264 -[[image:image-20220723113448-7.png||height="995" width="450"]]
265 265  
266 -**Block Explain:**
296 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
267 267  
268 -1.  Display LA66 USB LoRaWAN Module connection status
269 269  
270 -2.  Check and reconnect
299 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
271 271  
272 -3.  Turn send timestamps on or off
273 273  
274 -4.  Display LoRaWan connection status
302 +[[image:image-20220602171217-1.png||height="538" width="800"]]
275 275  
276 -5.  Check LoRaWan connection status
277 277  
278 -6.  The RSSI value of the node when the ACK is received
305 +Open the serial port tool
279 279  
280 -7.  Node's Signal Strength Icon
307 +[[image:image-20220602161617-8.png]]
281 281  
282 -8.  Configure Location Uplink Interval
309 +[[image:image-20220602161718-9.png||height="457" width="800"]]
283 283  
284 -9.  AT command input box
285 285  
286 -10.  Send Button:  Send input box info to LA66 USB Adapter
287 287  
288 -11.  Output Log from LA66 USB adapter
313 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
289 289  
290 -12.  clear log button
315 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
291 291  
292 -13.  exit button
293 293  
318 +[[image:image-20220602161935-10.png||height="498" width="800"]]
294 294  
295 295  
296 -LA66 USB LoRaWAN Module not connected
297 297  
322 +(% style="color:blue" %)**3. See Uplink Command**
298 298  
299 -[[image:image-20220723110520-5.png||height="677" width="508"]]
324 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
300 300  
326 +example: AT+SENDB=01,02,8,05820802581ea0a5
301 301  
328 +[[image:image-20220602162157-11.png||height="497" width="800"]]
302 302  
303 -Connect LA66 USB LoRaWAN Module
304 304  
305 -[[image:image-20220723110626-6.png||height="681" width="511"]]
306 306  
332 +(% style="color:blue" %)**4. Check to see if TTN received the message**
307 307  
334 +[[image:image-20220602162331-12.png||height="420" width="800"]]
308 308  
309 -=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
310 310  
311 311  
312 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
338 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
313 313  
314 314  
315 -[[image:image-20220723134549-8.png]]
341 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
316 316  
317 317  
344 +(% style="color:red" %)**Preconditions:**
318 318  
319 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
346 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
320 320  
348 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
321 321  
322 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
323 323  
324 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
325 325  
326 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
352 +(% style="color:blue" %)**Steps for usage:**
327 327  
328 -LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
354 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
329 329  
356 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
330 330  
331 -Example output in NodeRed is as below:
358 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
332 332  
333 -[[image:image-20220723144339-1.png]]
334 334  
335 335  
362 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
336 336  
337 -== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
338 338  
365 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
339 339  
340 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
341 341  
342 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
368 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
343 343  
370 +[[image:image-20220602171233-2.png||height="538" width="800"]]
344 344  
345 -[[image:image-20220723150132-2.png]]
346 346  
347 347  
374 +(% style="color:blue" %)**2. Install Minicom in RPi.**
348 348  
349 -= 2.  FAQ =
376 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
350 350  
378 + (% style="background-color:yellow" %)**apt update**
351 351  
352 -== 2.1  How to Compile Source Code for LA66? ==
380 + (% style="background-color:yellow" %)**apt install minicom**
353 353  
354 354  
355 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
383 +Use minicom to connect to the RPI's terminal
356 356  
385 +[[image:image-20220602153146-3.png||height="439" width="500"]]
357 357  
358 358  
359 -= 3.  Order Info =
360 360  
389 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
361 361  
362 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
391 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
363 363  
364 364  
394 +[[image:image-20220602154928-5.png||height="436" width="500"]]
395 +
396 +
397 +
398 +(% style="color:blue" %)**4. Send Uplink message**
399 +
400 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
401 +
402 +example: AT+SENDB=01,02,8,05820802581ea0a5
403 +
404 +
405 +[[image:image-20220602160339-6.png||height="517" width="600"]]
406 +
407 +
408 +
409 +Check to see if TTN received the message
410 +
411 +[[image:image-20220602160627-7.png||height="369" width="800"]]
412 +
413 +
414 +
415 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
416 +
417 +
418 +
419 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
420 +
421 +
422 +
423 +
424 += 4.  Order Info =
425 +
426 +
427 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
428 +
429 +
365 365  (% style="color:blue" %)**XXX**(%%): The default frequency band
366 366  
367 367  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -375,10 +375,9 @@
375 375  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
376 376  
377 377  
378 -= 4.  Reference =
379 379  
444 += 5.  Reference =
380 380  
381 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
382 -* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
446 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
383 383  
384 384  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content