Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 149.7
edited by Xiaoling
on 2022/08/22 16:24
Change comment: There is no comment for this version
To version 87.8
edited by Xiaoling
on 2022/07/13 10:01
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -1,68 +1,47 @@
1 1  
2 2  
3 -**Table of Contents:**
4 -
5 5  {{toc/}}
6 6  
7 7  
8 8  
7 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
10 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
13 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
15 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 16  
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 -(((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 -)))
27 -
28 -(((
29 29  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 -)))
31 31  
32 -(((
33 33  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 -)))
35 35  
36 -(((
37 37  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 -)))
39 39  
40 40  
41 -
42 42  == 1.2  Features ==
43 43  
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
29 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
34 +* Ultra-long RF range
56 56  
57 57  
58 58  
59 59  == 1.3  Specification ==
60 60  
61 -
62 62  * CPU: 32-bit 48 MHz
63 63  * Flash: 256KB
64 64  * RAM: 64KB
65 -* Input Power Range: 5v
43 +* Input Power Range: 1.8v ~~ 3.7v
44 +* Power Consumption: < 4uA.
66 66  * Frequency Range: 150 MHz ~~ 960 MHz
67 67  * Maximum Power +22 dBm constant RF output
68 68  * High sensitivity: -148 dBm
... ... @@ -74,296 +74,376 @@
74 74  ** Operating: 10 ~~ 95% (Non-Condensing)
75 75  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
76 76  * LoRa Rx current: <9 mA
56 +* I/O Voltage: 3.3v
77 77  
78 78  
79 79  
80 -== 1.4  Pin Mapping & LED ==
60 +== 1.4  AT Command ==
81 81  
62 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
82 82  
83 -[[image:image-20220813183239-3.png||height="526" width="662"]]
84 84  
65 +== 1.5  Dimension ==
85 85  
67 +[[image:image-20220517072526-1.png]]
86 86  
87 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
88 88  
89 89  
90 -(((
91 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
92 -)))
71 +== 1.6  Pin Mapping ==
93 93  
94 94  
95 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
74 +[[image:image-20220523101537-1.png]]
96 96  
97 97  
98 -[[image:image-20220723100027-1.png]]
99 99  
78 +== 1.7  Land Pattern ==
100 100  
101 -Open the serial port tool
80 +[[image:image-20220517072821-2.png]]
102 102  
103 -[[image:image-20220602161617-8.png]]
104 104  
105 -[[image:image-20220602161718-9.png||height="457" width="800"]]
106 106  
84 += 2.  LA66 LoRaWAN Shield =
107 107  
108 108  
109 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
87 +== 2.1  Overview ==
110 110  
89 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
111 111  
112 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
113 113  
92 +== 2.2  Features ==
114 114  
115 -[[image:image-20220602161935-10.png||height="498" width="800"]]
94 +* Arduino Shield base on LA66 LoRaWAN module
95 +* Support LoRaWAN v1.0.4 protocol
96 +* Support peer-to-peer protocol
97 +* TCXO crystal to ensure RF performance on low temperature
98 +* SMA connector
99 +* Available in different frequency LoRaWAN frequency bands.
100 +* World-wide unique OTAA keys.
101 +* AT Command via UART-TTL interface
102 +* Firmware upgradable via UART interface
103 +* Ultra-long RF range
116 116  
117 117  
118 118  
119 -(% style="color:blue" %)**3. See Uplink Command**
107 +== 2.3  Specification ==
120 120  
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
121 121  
122 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
123 123  
124 -example: AT+SENDB=01,02,8,05820802581ea0a5
125 125  
126 -[[image:image-20220602162157-11.png||height="497" width="800"]]
129 +== 2.4  Pin Mapping & LED ==
127 127  
128 128  
129 129  
130 -(% style="color:blue" %)**4. Check to see if TTN received the message**
133 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
131 131  
132 132  
133 -[[image:image-20220817093644-1.png]]
134 134  
137 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
135 135  
136 136  
137 -== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
138 138  
141 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
139 139  
140 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
141 141  
142 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
143 143  
145 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
144 144  
145 -(% style="color:red" %)**Preconditions:**
146 146  
147 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
148 +=== 2.8.1  Items needed for update ===
148 148  
149 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
150 +1. LA66 LoRaWAN Shield
151 +1. Arduino
152 +1. USB TO TTL Adapter
150 150  
154 +[[image:image-20220602100052-2.png||height="385" width="600"]]
151 151  
152 152  
153 -(% style="color:blue" %)**Steps for usage:**
157 +=== 2.8.2  Connection ===
154 154  
155 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
156 156  
157 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
160 +[[image:image-20220602101311-3.png||height="276" width="600"]]
158 158  
159 159  
160 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
163 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
161 161  
165 +(% style="background-color:yellow" %)**GND  <-> GND
166 +TXD  <->  TXD
167 +RXD  <->  RXD**
162 162  
163 163  
164 -== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
170 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
165 165  
172 +Connect USB TTL Adapter to PC after connecting the wires
166 166  
167 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
168 168  
175 +[[image:image-20220602102240-4.png||height="304" width="600"]]
169 169  
170 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
171 171  
178 +=== 2.8.3  Upgrade steps ===
172 172  
173 -[[image:image-20220723100439-2.png]]
174 174  
181 +==== 1.  Switch SW1 to put in ISP position ====
175 175  
176 176  
177 -(% style="color:blue" %)**2. Install Minicom in RPi.**
184 +[[image:image-20220602102824-5.png||height="306" width="600"]]
178 178  
179 179  
180 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
187 +==== 2.  Press the RST switch once ====
181 181  
182 - (% style="background-color:yellow" %)**apt update**
189 +[[image:image-20220602104701-12.png||height="285" width="600"]]
183 183  
184 - (% style="background-color:yellow" %)**apt install minicom**
185 185  
192 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
186 186  
187 -Use minicom to connect to the RPI's terminal
188 188  
189 -[[image:image-20220602153146-3.png||height="439" width="500"]]
195 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
190 190  
191 191  
198 +[[image:image-20220602103227-6.png]]
192 192  
193 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
194 194  
201 +[[image:image-20220602103357-7.png]]
195 195  
196 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
197 197  
198 198  
199 -[[image:image-20220602154928-5.png||height="436" width="500"]]
205 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
206 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
200 200  
201 201  
209 +[[image:image-20220602103844-8.png]]
202 202  
203 -(% style="color:blue" %)**4. Send Uplink message**
204 204  
205 205  
206 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
213 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
214 +(% style="color:blue" %)**3. Select the bin file to burn**
207 207  
208 -example: AT+SENDB=01,02,8,05820802581ea0a5
209 209  
217 +[[image:image-20220602104144-9.png]]
210 210  
211 -[[image:image-20220602160339-6.png||height="517" width="600"]]
212 212  
220 +[[image:image-20220602104251-10.png]]
213 213  
214 214  
215 -Check to see if TTN received the message
223 +[[image:image-20220602104402-11.png]]
216 216  
217 -[[image:image-20220602160627-7.png||height="369" width="800"]]
218 218  
219 219  
227 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
228 +(% style="color:blue" %)**4. Click to start the download**
220 220  
221 -== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
230 +[[image:image-20220602104923-13.png]]
222 222  
223 223  
224 -=== 1.8.1  Hardware and Software Connection ===
233 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
234 +(% style="color:blue" %)**5. Check update process**
225 225  
226 226  
237 +[[image:image-20220602104948-14.png]]
227 227  
228 -==== (% style="color:blue" %)**Overview：**(%%) ====
229 229  
230 230  
231 -(((
232 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
241 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
242 +(% style="color:blue" %)**The following picture shows that the burning is successful**
233 233  
234 -* Send real-time location information of mobile phone to LoRaWAN network.
235 -* Check LoRaWAN network signal strengh.
236 -* Manually send messages to LoRaWAN network.
237 -)))
244 +[[image:image-20220602105251-15.png]]
238 238  
239 239  
240 240  
248 += 3.  LA66 USB LoRaWAN Adapter =
241 241  
242 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
243 243  
251 +== 3.1  Overview ==
244 244  
245 -A USB to Type-C adapter is needed to connect to a Mobile phone.
253 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
246 246  
247 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
248 248  
249 -[[image:image-20220813174353-2.png||height="360" width="313"]]
256 +== 3.2  Features ==
250 250  
258 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
259 +* Ultra-long RF range
260 +* Support LoRaWAN v1.0.4 protocol
261 +* Support peer-to-peer protocol
262 +* TCXO crystal to ensure RF performance on low temperature
263 +* Spring RF antenna
264 +* Available in different frequency LoRaWAN frequency bands.
265 +* World-wide unique OTAA keys.
266 +* AT Command via UART-TTL interface
267 +* Firmware upgradable via UART interface
251 251  
269 +== 3.3  Specification ==
252 252  
253 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
271 +* CPU: 32-bit 48 MHz
272 +* Flash: 256KB
273 +* RAM: 64KB
274 +* Input Power Range: 5v
275 +* Frequency Range: 150 MHz ~~ 960 MHz
276 +* Maximum Power +22 dBm constant RF output
277 +* High sensitivity: -148 dBm
278 +* Temperature:
279 +** Storage: -55 ~~ +125℃
280 +** Operating: -40 ~~ +85℃
281 +* Humidity:
282 +** Storage: 5 ~~ 95% (Non-Condensing)
283 +** Operating: 10 ~~ 95% (Non-Condensing)
284 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
285 +* LoRa Rx current: <9 mA
254 254  
287 +== 3.4  Pin Mapping & LED ==
255 255  
256 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
257 257  
258 -[[image:image-20220813173738-1.png]]
259 259  
291 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
260 260  
261 261  
262 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
294 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
263 263  
264 264  
265 -Function and page introduction
297 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
266 266  
267 267  
268 -[[image:image-20220723113448-7.png||height="995" width="450"]]
300 +[[image:image-20220602171217-1.png||height="538" width="800"]]
269 269  
270 -**Block Explain:**
271 271  
272 -1.  Display LA66 USB LoRaWAN Module connection status
303 +Open the serial port tool
273 273  
274 -2.  Check and reconnect
305 +[[image:image-20220602161617-8.png]]
275 275  
276 -3.  Turn send timestamps on or off
307 +[[image:image-20220602161718-9.png||height="457" width="800"]]
277 277  
278 -4.  Display LoRaWan connection status
279 279  
280 -5.  Check LoRaWan connection status
281 281  
282 -6.  The RSSI value of the node when the ACK is received
311 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
283 283  
284 -7.  Node's Signal Strength Icon
313 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
285 285  
286 -8.  Configure Location Uplink Interval
287 287  
288 -9.  AT command input box
316 +[[image:image-20220602161935-10.png||height="498" width="800"]]
289 289  
290 -10.  Send Button:  Send input box info to LA66 USB Adapter
291 291  
292 -11.  Output Log from LA66 USB adapter
293 293  
294 -12.  clear log button
320 +(% style="color:blue" %)**3. See Uplink Command**
295 295  
296 -13.  exit button
322 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
297 297  
324 +example: AT+SENDB=01,02,8,05820802581ea0a5
298 298  
326 +[[image:image-20220602162157-11.png||height="497" width="800"]]
299 299  
300 -LA66 USB LoRaWAN Module not connected
301 301  
302 302  
303 -[[image:image-20220723110520-5.png||height="677" width="508"]]
330 +(% style="color:blue" %)**4. Check to see if TTN received the message**
304 304  
332 +[[image:image-20220602162331-12.png||height="420" width="800"]]
305 305  
306 306  
307 -Connect LA66 USB LoRaWAN Module
308 308  
309 -[[image:image-20220723110626-6.png||height="681" width="511"]]
336 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
310 310  
311 311  
339 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
312 312  
313 -=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
314 314  
342 +(% style="color:red" %)**Preconditions:**
315 315  
316 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
344 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
317 317  
346 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
318 318  
319 -[[image:image-20220723134549-8.png]]
320 320  
321 321  
350 +(% style="color:blue" %)**Steps for usage:**
322 322  
323 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
352 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
324 324  
354 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
325 325  
326 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
356 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
327 327  
328 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
329 329  
330 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
331 331  
360 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
332 332  
333 -Example output in NodeRed is as below:
334 334  
335 -[[image:image-20220723144339-1.png]]
363 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
336 336  
337 337  
366 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
338 338  
339 -== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
368 +[[image:image-20220602171233-2.png||height="538" width="800"]]
340 340  
341 341  
342 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
343 343  
344 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
372 +(% style="color:blue" %)**2. Install Minicom in RPi.**
345 345  
374 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
346 346  
347 -[[image:image-20220723150132-2.png]]
376 + (% style="background-color:yellow" %)**apt update**
348 348  
378 + (% style="background-color:yellow" %)**apt install minicom**
349 349  
350 350  
351 -= 2.  FAQ =
381 +Use minicom to connect to the RPI's terminal
352 352  
383 +[[image:image-20220602153146-3.png||height="439" width="500"]]
353 353  
354 -== 2.1  How to Compile Source Code for LA66? ==
355 355  
356 356  
357 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
387 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
388 +(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
358 358  
390 +[[image:image-20220602154928-5.png||height="436" width="500"]]
359 359  
360 360  
361 -= 3.  Order Info =
362 362  
394 +(% style="color:blue" %)**4. Send Uplink message**
363 363  
364 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
396 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
365 365  
398 +example: AT+SENDB=01,02,8,05820802581ea0a5
366 366  
400 +
401 +[[image:image-20220602160339-6.png||height="517" width="600"]]
402 +
403 +
404 +
405 +Check to see if TTN received the message
406 +
407 +[[image:image-20220602160627-7.png||height="369" width="800"]]
408 +
409 +
410 +
411 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
412 +
413 +
414 +
415 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
416 +
417 +
418 +
419 +
420 += 4.  Order Info =
421 +
422 +
423 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
424 +
425 +
367 367  (% style="color:blue" %)**XXX**(%%): The default frequency band
368 368  
369 369  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -379,10 +379,8 @@
379 379  
380 380  
381 381  
382 -= 4.  Reference =
441 += 5.  Reference =
383 383  
443 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
384 384  
385 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
386 -
387 -
388 388  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content