Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 149.7
edited by Xiaoling
on 2022/08/22 16:24
Change comment: There is no comment for this version
To version 87.6
edited by Xiaoling
on 2022/07/13 09:59
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -1,68 +1,49 @@
1 1  
2 2  
3 -**Table of Contents:**
3 +{{box cssClass="floatinginfobox" title="**Contents**"}}
4 +{{toc/}}
5 +{{/box}}
4 4  
5 5  {{toc/}}
6 6  
7 7  
8 8  
11 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
14 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
17 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
19 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 16  
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 -(((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 -)))
27 -
28 -(((
29 29  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 -)))
31 31  
32 -(((
33 33  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 -)))
35 35  
36 -(((
37 37  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 -)))
39 39  
40 40  
41 -
42 42  == 1.2  Features ==
43 43  
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
33 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
38 +* Ultra-long RF range
56 56  
57 -
58 -
59 59  == 1.3  Specification ==
60 60  
61 -
62 62  * CPU: 32-bit 48 MHz
63 63  * Flash: 256KB
64 64  * RAM: 64KB
65 -* Input Power Range: 5v
45 +* Input Power Range: 1.8v ~~ 3.7v
46 +* Power Consumption: < 4uA.
66 66  * Frequency Range: 150 MHz ~~ 960 MHz
67 67  * Maximum Power +22 dBm constant RF output
68 68  * High sensitivity: -148 dBm
... ... @@ -74,296 +74,371 @@
74 74  ** Operating: 10 ~~ 95% (Non-Condensing)
75 75  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
76 76  * LoRa Rx current: <9 mA
58 +* I/O Voltage: 3.3v
77 77  
60 +== 1.4  AT Command ==
78 78  
62 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
79 79  
80 -== 1.4  Pin Mapping & LED ==
81 81  
65 +== 1.5  Dimension ==
82 82  
83 -[[image:image-20220813183239-3.png||height="526" width="662"]]
67 +[[image:image-20220517072526-1.png]]
84 84  
85 85  
86 86  
87 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
71 +== 1.6  Pin Mapping ==
88 88  
89 89  
90 -(((
91 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
92 -)))
74 +[[image:image-20220523101537-1.png]]
93 93  
94 94  
95 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
96 96  
78 +== 1.7  Land Pattern ==
97 97  
98 -[[image:image-20220723100027-1.png]]
80 +[[image:image-20220517072821-2.png]]
99 99  
100 100  
101 -Open the serial port tool
102 102  
103 -[[image:image-20220602161617-8.png]]
84 += 2.  LA66 LoRaWAN Shield =
104 104  
105 -[[image:image-20220602161718-9.png||height="457" width="800"]]
106 106  
87 +== 2.1  Overview ==
107 107  
89 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
108 108  
109 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
110 110  
92 +== 2.2  Features ==
111 111  
112 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
94 +* Arduino Shield base on LA66 LoRaWAN module
95 +* Support LoRaWAN v1.0.4 protocol
96 +* Support peer-to-peer protocol
97 +* TCXO crystal to ensure RF performance on low temperature
98 +* SMA connector
99 +* Available in different frequency LoRaWAN frequency bands.
100 +* World-wide unique OTAA keys.
101 +* AT Command via UART-TTL interface
102 +* Firmware upgradable via UART interface
103 +* Ultra-long RF range
113 113  
105 +== 2.3  Specification ==
114 114  
115 -[[image:image-20220602161935-10.png||height="498" width="800"]]
107 +* CPU: 32-bit 48 MHz
108 +* Flash: 256KB
109 +* RAM: 64KB
110 +* Input Power Range: 1.8v ~~ 3.7v
111 +* Power Consumption: < 4uA.
112 +* Frequency Range: 150 MHz ~~ 960 MHz
113 +* Maximum Power +22 dBm constant RF output
114 +* High sensitivity: -148 dBm
115 +* Temperature:
116 +** Storage: -55 ~~ +125℃
117 +** Operating: -40 ~~ +85℃
118 +* Humidity:
119 +** Storage: 5 ~~ 95% (Non-Condensing)
120 +** Operating: 10 ~~ 95% (Non-Condensing)
121 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
122 +* LoRa Rx current: <9 mA
123 +* I/O Voltage: 3.3v
116 116  
125 +== 2.4  Pin Mapping & LED ==
117 117  
118 118  
119 -(% style="color:blue" %)**3. See Uplink Command**
120 120  
129 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
121 121  
122 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
123 123  
124 -example: AT+SENDB=01,02,8,05820802581ea0a5
125 125  
126 -[[image:image-20220602162157-11.png||height="497" width="800"]]
133 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
127 127  
128 128  
129 129  
130 -(% style="color:blue" %)**4. Check to see if TTN received the message**
137 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
131 131  
132 132  
133 -[[image:image-20220817093644-1.png]]
134 134  
141 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
135 135  
136 136  
137 -== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
144 +=== 2.8.1  Items needed for update ===
138 138  
146 +1. LA66 LoRaWAN Shield
147 +1. Arduino
148 +1. USB TO TTL Adapter
139 139  
140 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
150 +[[image:image-20220602100052-2.png||height="385" width="600"]]
141 141  
142 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
143 143  
153 +=== 2.8.2  Connection ===
144 144  
145 -(% style="color:red" %)**Preconditions:**
146 146  
147 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
156 +[[image:image-20220602101311-3.png||height="276" width="600"]]
148 148  
149 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
150 150  
159 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
151 151  
152 152  
153 -(% style="color:blue" %)**Steps for usage:**
162 +(% style="background-color:yellow" %)**GND  <-> GND
163 +TXD  <->  TXD
164 +RXD  <->  RXD**
154 154  
155 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
156 156  
157 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
167 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
158 158  
169 +Connect USB TTL Adapter to PC after connecting the wires
159 159  
160 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
161 161  
172 +[[image:image-20220602102240-4.png||height="304" width="600"]]
162 162  
163 163  
164 -== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
175 +=== 2.8.3  Upgrade steps ===
165 165  
166 166  
167 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
178 +==== 1.  Switch SW1 to put in ISP position ====
168 168  
169 169  
170 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
181 +[[image:image-20220602102824-5.png||height="306" width="600"]]
171 171  
172 172  
173 -[[image:image-20220723100439-2.png]]
184 +==== 2.  Press the RST switch once ====
174 174  
186 +[[image:image-20220602104701-12.png||height="285" width="600"]]
175 175  
176 176  
177 -(% style="color:blue" %)**2. Install Minicom in RPi.**
189 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
178 178  
179 179  
180 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
192 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
181 181  
182 - (% style="background-color:yellow" %)**apt update**
183 183  
184 - (% style="background-color:yellow" %)**apt install minicom**
195 +[[image:image-20220602103227-6.png]]
185 185  
186 186  
187 -Use minicom to connect to the RPI's terminal
198 +[[image:image-20220602103357-7.png]]
188 188  
189 -[[image:image-20220602153146-3.png||height="439" width="500"]]
190 190  
191 191  
202 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
203 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
192 192  
193 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
194 194  
206 +[[image:image-20220602103844-8.png]]
195 195  
196 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
197 197  
198 198  
199 -[[image:image-20220602154928-5.png||height="436" width="500"]]
210 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
211 +(% style="color:blue" %)**3. Select the bin file to burn**
200 200  
201 201  
214 +[[image:image-20220602104144-9.png]]
202 202  
203 -(% style="color:blue" %)**4. Send Uplink message**
204 204  
217 +[[image:image-20220602104251-10.png]]
205 205  
206 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
207 207  
208 -example: AT+SENDB=01,02,8,05820802581ea0a5
220 +[[image:image-20220602104402-11.png]]
209 209  
210 210  
211 -[[image:image-20220602160339-6.png||height="517" width="600"]]
212 212  
224 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
225 +(% style="color:blue" %)**4. Click to start the download**
213 213  
227 +[[image:image-20220602104923-13.png]]
214 214  
215 -Check to see if TTN received the message
216 216  
217 -[[image:image-20220602160627-7.png||height="369" width="800"]]
230 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
231 +(% style="color:blue" %)**5. Check update process**
218 218  
219 219  
234 +[[image:image-20220602104948-14.png]]
220 220  
221 -== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
222 222  
223 223  
224 -=== 1.8.1  Hardware and Software Connection ===
238 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
239 +(% style="color:blue" %)**The following picture shows that the burning is successful**
225 225  
241 +[[image:image-20220602105251-15.png]]
226 226  
227 227  
228 -==== (% style="color:blue" %)**Overview：**(%%) ====
229 229  
245 += 3.  LA66 USB LoRaWAN Adapter =
230 230  
231 -(((
232 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
233 233  
234 -* Send real-time location information of mobile phone to LoRaWAN network.
235 -* Check LoRaWAN network signal strengh.
236 -* Manually send messages to LoRaWAN network.
237 -)))
248 +== 3.1  Overview ==
238 238  
250 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
239 239  
240 240  
253 +== 3.2  Features ==
241 241  
242 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
255 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
256 +* Ultra-long RF range
257 +* Support LoRaWAN v1.0.4 protocol
258 +* Support peer-to-peer protocol
259 +* TCXO crystal to ensure RF performance on low temperature
260 +* Spring RF antenna
261 +* Available in different frequency LoRaWAN frequency bands.
262 +* World-wide unique OTAA keys.
263 +* AT Command via UART-TTL interface
264 +* Firmware upgradable via UART interface
243 243  
266 +== 3.3  Specification ==
244 244  
245 -A USB to Type-C adapter is needed to connect to a Mobile phone.
268 +* CPU: 32-bit 48 MHz
269 +* Flash: 256KB
270 +* RAM: 64KB
271 +* Input Power Range: 5v
272 +* Frequency Range: 150 MHz ~~ 960 MHz
273 +* Maximum Power +22 dBm constant RF output
274 +* High sensitivity: -148 dBm
275 +* Temperature:
276 +** Storage: -55 ~~ +125℃
277 +** Operating: -40 ~~ +85℃
278 +* Humidity:
279 +** Storage: 5 ~~ 95% (Non-Condensing)
280 +** Operating: 10 ~~ 95% (Non-Condensing)
281 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
282 +* LoRa Rx current: <9 mA
246 246  
247 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
284 +== 3.4  Pin Mapping & LED ==
248 248  
249 -[[image:image-20220813174353-2.png||height="360" width="313"]]
250 250  
251 251  
288 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
252 252  
253 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
254 254  
291 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
255 255  
256 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
257 257  
258 -[[image:image-20220813173738-1.png]]
294 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
259 259  
260 260  
297 +[[image:image-20220602171217-1.png||height="538" width="800"]]
261 261  
262 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
263 263  
300 +Open the serial port tool
264 264  
265 -Function and page introduction
302 +[[image:image-20220602161617-8.png]]
266 266  
304 +[[image:image-20220602161718-9.png||height="457" width="800"]]
267 267  
268 -[[image:image-20220723113448-7.png||height="995" width="450"]]
269 269  
270 -**Block Explain:**
271 271  
272 -1.  Display LA66 USB LoRaWAN Module connection status
308 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
273 273  
274 -2.  Check and reconnect
310 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
275 275  
276 -3.  Turn send timestamps on or off
277 277  
278 -4.  Display LoRaWan connection status
313 +[[image:image-20220602161935-10.png||height="498" width="800"]]
279 279  
280 -5.  Check LoRaWan connection status
281 281  
282 -6.  The RSSI value of the node when the ACK is received
283 283  
284 -7.  Node's Signal Strength Icon
317 +(% style="color:blue" %)**3. See Uplink Command**
285 285  
286 -8.  Configure Location Uplink Interval
319 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
287 287  
288 -9.  AT command input box
321 +example: AT+SENDB=01,02,8,05820802581ea0a5
289 289  
290 -10.  Send Button:  Send input box info to LA66 USB Adapter
323 +[[image:image-20220602162157-11.png||height="497" width="800"]]
291 291  
292 -11.  Output Log from LA66 USB adapter
293 293  
294 -12.  clear log button
295 295  
296 -13.  exit button
327 +(% style="color:blue" %)**4. Check to see if TTN received the message**
297 297  
329 +[[image:image-20220602162331-12.png||height="420" width="800"]]
298 298  
299 299  
300 -LA66 USB LoRaWAN Module not connected
301 301  
333 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
302 302  
303 -[[image:image-20220723110520-5.png||height="677" width="508"]]
304 304  
336 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
305 305  
306 306  
307 -Connect LA66 USB LoRaWAN Module
339 +(% style="color:red" %)**Preconditions:**
308 308  
309 -[[image:image-20220723110626-6.png||height="681" width="511"]]
341 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
310 310  
343 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
311 311  
312 312  
313 -=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
314 314  
347 +(% style="color:blue" %)**Steps for usage:**
315 315  
316 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
349 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
317 317  
351 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
318 318  
319 -[[image:image-20220723134549-8.png]]
353 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
320 320  
321 321  
322 322  
323 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
357 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
324 324  
325 325  
326 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
360 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
327 327  
328 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
329 329  
330 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
363 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
331 331  
365 +[[image:image-20220602171233-2.png||height="538" width="800"]]
332 332  
333 -Example output in NodeRed is as below:
334 334  
335 -[[image:image-20220723144339-1.png]]
336 336  
369 +(% style="color:blue" %)**2. Install Minicom in RPi.**
337 337  
371 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
338 338  
339 -== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
373 + (% style="background-color:yellow" %)**apt update**
340 340  
375 + (% style="background-color:yellow" %)**apt install minicom**
341 341  
342 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
343 343  
344 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
378 +Use minicom to connect to the RPI's terminal
345 345  
380 +[[image:image-20220602153146-3.png||height="439" width="500"]]
346 346  
347 -[[image:image-20220723150132-2.png]]
348 348  
349 349  
384 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
385 +(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
350 350  
351 -= 2.  FAQ =
387 +[[image:image-20220602154928-5.png||height="436" width="500"]]
352 352  
353 353  
354 -== 2.1  How to Compile Source Code for LA66? ==
355 355  
391 +(% style="color:blue" %)**4. Send Uplink message**
356 356  
357 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
393 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
358 358  
395 +example: AT+SENDB=01,02,8,05820802581ea0a5
359 359  
360 360  
361 -= 3.  Order Info =
398 +[[image:image-20220602160339-6.png||height="517" width="600"]]
362 362  
363 363  
364 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
365 365  
402 +Check to see if TTN received the message
366 366  
404 +[[image:image-20220602160627-7.png||height="369" width="800"]]
405 +
406 +
407 +
408 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
409 +
410 +
411 +
412 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
413 +
414 +
415 +
416 +
417 += 4.  Order Info =
418 +
419 +
420 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
421 +
422 +
367 367  (% style="color:blue" %)**XXX**(%%): The default frequency band
368 368  
369 369  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -379,10 +379,8 @@
379 379  
380 380  
381 381  
382 -= 4.  Reference =
438 += 5.  Reference =
383 383  
440 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
384 384  
385 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
386 -
387 -
388 388  
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content