Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 149.6
edited by Xiaoling
on 2022/08/22 16:23
Change comment: There is no comment for this version
To version 78.2
edited by Edwin Chen
on 2022/07/10 21:55
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,68 +1,41 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
9 9  
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 -
13 -
14 -== 1.1  Overview ==
15 -
16 -
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 -(((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 -)))
27 -
28 -(((
29 29  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 -)))
31 31  
32 -(((
33 33  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 -)))
35 35  
36 -(((
37 37  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 -)))
39 39  
40 40  
20 +== Features ==
41 41  
42 -== 1.2  Features ==
43 -
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
25 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
30 +* Ultra-long RF range
56 56  
32 +== Specification ==
57 57  
58 -
59 -== 1.3  Specification ==
60 -
61 -
62 62  * CPU: 32-bit 48 MHz
63 63  * Flash: 256KB
64 64  * RAM: 64KB
65 -* Input Power Range: 5v
37 +* Input Power Range: 1.8v ~~ 3.7v
38 +* Power Consumption: < 4uA.
66 66  * Frequency Range: 150 MHz ~~ 960 MHz
67 67  * Maximum Power +22 dBm constant RF output
68 68  * High sensitivity: -148 dBm
... ... @@ -74,313 +74,357 @@
74 74  ** Operating: 10 ~~ 95% (Non-Condensing)
75 75  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
76 76  * LoRa Rx current: <9 mA
50 +* I/O Voltage: 3.3v
77 77  
52 +== AT Command ==
78 78  
54 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
79 79  
80 -== 1.4  Pin Mapping & LED ==
81 81  
82 -[[image:image-20220813183239-3.png||height="526" width="662"]]
57 +== Dimension ==
83 83  
59 +[[image:image-20220517072526-1.png]]
84 84  
85 85  
86 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
62 +== Pin Mapping ==
87 87  
64 +[[image:image-20220523101537-1.png]]
88 88  
89 -(((
90 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
91 -)))
66 +== Land Pattern ==
92 92  
68 +[[image:image-20220517072821-2.png]]
93 93  
94 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
95 95  
71 +== Order Info ==
96 96  
97 -[[image:image-20220723100027-1.png]]
73 +Part Number: **LA66-XXX**
98 98  
75 +**XX**: The default frequency band
99 99  
100 -Open the serial port tool
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
101 101  
102 -[[image:image-20220602161617-8.png]]
87 += LA66 LoRaWAN Shield =
103 103  
104 -[[image:image-20220602161718-9.png||height="457" width="800"]]
89 +== Overview ==
105 105  
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
106 106  
107 107  
108 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
94 +== Features ==
109 109  
110 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
96 +* Arduino Shield base on LA66 LoRaWAN module
97 +* Support LoRaWAN v1.0.4 protocol
98 +* Support peer-to-peer protocol
99 +* TCXO crystal to ensure RF performance on low temperature
100 +* SMA connector
101 +* Available in different frequency LoRaWAN frequency bands.
102 +* World-wide unique OTAA keys.
103 +* AT Command via UART-TTL interface
104 +* Firmware upgradable via UART interface
105 +* Ultra-long RF range
111 111  
107 +== Specification ==
112 112  
113 -[[image:image-20220602161935-10.png||height="498" width="800"]]
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
114 114  
127 +== Pin Mapping & LED ==
115 115  
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
116 116  
117 -(% style="color:blue" %)**3. See Uplink Command**
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
118 118  
119 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
120 120  
121 -example: AT+SENDB=01,02,8,05820802581ea0a5
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
122 122  
123 -[[image:image-20220602162157-11.png||height="497" width="800"]]
137 +=== Items needed for update ===
124 124  
139 +1. LA66 LoRaWAN Shield
140 +1. Arduino
141 +1. USB TO TTL Adapter
125 125  
143 +[[image:image-20220602100052-2.png||height="385" width="600"]]
126 126  
127 -(% style="color:blue" %)**4. Check to see if TTN received the message**
128 128  
146 +=== Connection ===
129 129  
148 +[[image:image-20220602101311-3.png||height="276" width="600"]]
130 130  
131 -[[image:image-20220817093644-1.png]]
150 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-> (% style="color:blue" %)**USB TTL**(%%)
151 +**GND  <-> GND
152 +TXD  <-> TXD
153 +RXD  <-> RXD**
132 132  
155 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
133 133  
157 +Connect USB TTL Adapter to PC after connecting the wires
134 134  
135 -== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
136 136  
160 +[[image:image-20220602102240-4.png||height="304" width="600"]]
137 137  
138 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
139 139  
140 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
163 +=== Upgrade steps ===
141 141  
165 +==== Switch SW1 to put in ISP position ====
142 142  
143 -(% style="color:red" %)**Preconditions:**
167 +[[image:image-20220602102824-5.png||height="306" width="600"]]
144 144  
145 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
146 146  
147 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
170 +==== Press the RST switch once ====
148 148  
172 +[[image:image-20220602104701-12.png||height="285" width="600"]]
149 149  
150 150  
151 -(% style="color:blue" %)**Steps for usage:**
175 +==== Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
152 152  
153 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
177 +**~1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
154 154  
155 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
179 +[[image:image-20220602103227-6.png]]
156 156  
181 +[[image:image-20220602103357-7.png]]
157 157  
158 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
159 159  
184 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
185 +**2. Select the COM port corresponding to USB TTL**
160 160  
187 +[[image:image-20220602103844-8.png]]
161 161  
162 -== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
163 163  
190 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
191 +**3. Select the bin file to burn**
164 164  
165 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
193 +[[image:image-20220602104144-9.png]]
166 166  
195 +[[image:image-20220602104251-10.png]]
167 167  
168 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
197 +[[image:image-20220602104402-11.png]]
169 169  
170 170  
171 -[[image:image-20220723100439-2.png]]
200 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
201 +**4. Click to start the download**
172 172  
203 +[[image:image-20220602104923-13.png]]
173 173  
174 174  
175 -(% style="color:blue" %)**2. Install Minicom in RPi.**
206 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
207 +**5. Check update process**
176 176  
209 +[[image:image-20220602104948-14.png]]
177 177  
178 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
179 179  
180 - (% style="background-color:yellow" %)**apt update**
212 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
213 +**The following picture shows that the burning is successful**
181 181  
182 - (% style="background-color:yellow" %)**apt install minicom**
215 +[[image:image-20220602105251-15.png]]
183 183  
184 184  
185 -Use minicom to connect to the RPI's terminal
218 +== Order Info ==
186 186  
187 -[[image:image-20220602153146-3.png||height="439" width="500"]]
220 +Part Number: **LA66-LoRaWAN-Shield-XXX**
188 188  
222 +**XX**: The default frequency band
189 189  
224 +* **AS923**: LoRaWAN AS923 band
225 +* **AU915**: LoRaWAN AU915 band
226 +* **EU433**: LoRaWAN EU433 band
227 +* **EU868**: LoRaWAN EU868 band
228 +* **KR920**: LoRaWAN KR920 band
229 +* **US915**: LoRaWAN US915 band
230 +* **IN865**: LoRaWAN IN865 band
231 +* **CN470**: LoRaWAN CN470 band
232 +* **PP**: Peer to Peer LoRa Protocol
190 190  
191 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
234 +== Package Info ==
192 192  
236 +* LA66 LoRaWAN Shield x 1
237 +* RF Antenna x 1
193 193  
194 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
239 += LA66 USB LoRaWAN Adapter =
195 195  
241 +== Overview ==
196 196  
197 -[[image:image-20220602154928-5.png||height="436" width="500"]]
243 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
198 198  
199 199  
246 +== Features ==
200 200  
201 -(% style="color:blue" %)**4. Send Uplink message**
248 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
249 +* Ultra-long RF range
250 +* Support LoRaWAN v1.0.4 protocol
251 +* Support peer-to-peer protocol
252 +* TCXO crystal to ensure RF performance on low temperature
253 +* Spring RF antenna
254 +* Available in different frequency LoRaWAN frequency bands.
255 +* World-wide unique OTAA keys.
256 +* AT Command via UART-TTL interface
257 +* Firmware upgradable via UART interface
202 202  
259 +== Specification ==
203 203  
204 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
261 +* CPU: 32-bit 48 MHz
262 +* Flash: 256KB
263 +* RAM: 64KB
264 +* Input Power Range: 5v
265 +* Frequency Range: 150 MHz ~~ 960 MHz
266 +* Maximum Power +22 dBm constant RF output
267 +* High sensitivity: -148 dBm
268 +* Temperature:
269 +** Storage: -55 ~~ +125℃
270 +** Operating: -40 ~~ +85℃
271 +* Humidity:
272 +** Storage: 5 ~~ 95% (Non-Condensing)
273 +** Operating: 10 ~~ 95% (Non-Condensing)
274 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
275 +* LoRa Rx current: <9 mA
205 205  
206 -example: AT+SENDB=01,02,8,05820802581ea0a5
277 +== Pin Mapping & LED ==
207 207  
279 +== Example Send & Get Messages via LoRaWAN in PC ==
208 208  
209 -[[image:image-20220602160339-6.png||height="517" width="600"]]
281 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
210 210  
283 +~1. Connect the LA66 USB LoRaWAN adapter to PC
211 211  
285 +[[image:image-20220602171217-1.png||height="538" width="800"]]
212 212  
213 -Check to see if TTN received the message
287 +Open the serial port tool
214 214  
215 -[[image:image-20220602160627-7.png||height="369" width="800"]]
289 +[[image:image-20220602161617-8.png]]
216 216  
291 +[[image:image-20220602161718-9.png||height="457" width="800"]]
217 217  
218 218  
219 -== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
294 +2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.
220 220  
296 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
221 221  
222 -=== 1.8.1  Hardware and Software Connection ===
298 +[[image:image-20220602161935-10.png||height="498" width="800"]]
223 223  
224 224  
301 +3. See Uplink Command
225 225  
226 -==== (% style="color:blue" %)**Overview：**(%%) ====
303 +Command format: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
227 227  
305 +example: AT+SENDB=01,02,8,05820802581ea0a5
228 228  
229 -(((
230 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
307 +[[image:image-20220602162157-11.png||height="497" width="800"]]
231 231  
232 -* Send real-time location information of mobile phone to LoRaWAN network.
233 -* Check LoRaWAN network signal strengh.
234 -* Manually send messages to LoRaWAN network.
235 -)))
236 236  
310 +4. Check to see if TTN received the message
237 237  
312 +[[image:image-20220602162331-12.png||height="420" width="800"]]
238 238  
239 239  
240 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
241 241  
316 +== Example Send & Get Messages via LoRaWAN in RPi ==
242 242  
243 -A USB to Type-C adapter is needed to connect to a Mobile phone.
318 +Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi
244 244  
245 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
320 +[[image:image-20220602171233-2.png||height="538" width="800"]]
246 246  
247 -[[image:image-20220813174353-2.png||height="360" width="313"]]
322 +Log in to the RPI's terminal and connect to the serial port
248 248  
324 +[[image:image-20220602153146-3.png]]
249 249  
326 +Press the reset switch RST on the LA66 LoRa Shield.
327 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
250 250  
251 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
329 +[[image:image-20220602154928-5.png]]
252 252  
331 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
253 253  
254 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
333 +example: AT+SENDB=01,02,8,05820802581ea0a5
255 255  
256 -[[image:image-20220813173738-1.png]]
335 +[[image:image-20220602160339-6.png]]
257 257  
337 +Check to see if TTN received the message
258 258  
339 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
259 259  
260 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
341 +=== Install Minicom ===
261 261  
343 +Enter the following command in the RPI terminal
262 262  
263 -Function and page introduction
345 +apt update
264 264  
347 +[[image:image-20220602143155-1.png]]
265 265  
266 -[[image:image-20220723113448-7.png||height="995" width="450"]]
349 +apt install minicom
267 267  
268 -**Block Explain:**
351 +[[image:image-20220602143744-2.png]]
269 269  
270 -1.  Display LA66 USB LoRaWAN Module connection status
353 +=== Send PC's CPU/RAM usage to TTN via script. ===
271 271  
272 -2.  Check and reconnect
355 +==== Take python as an example： ====
273 273  
274 -3.  Turn send timestamps on or off
357 +===== Preconditions: =====
275 275  
276 -4.  Display LoRaWan connection status
359 +1.LA66 USB LoRaWAN Adapter works fine
277 277  
278 -5.  Check LoRaWan connection status
361 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
279 279  
280 -6.  The RSSI value of the node when the ACK is received
363 +===== Steps for usage =====
281 281  
282 -7.  Node's Signal Strength Icon
365 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
283 283  
284 -8.  Configure Location Uplink Interval
367 +2.Run the script and see the TTN
285 285  
286 -9.  AT command input box
369 +[[image:image-20220602115852-3.png]]
287 287  
288 -10.  Send Button:  Send input box info to LA66 USB Adapter
289 289  
290 -11.  Output Log from LA66 USB adapter
291 291  
292 -12.  clear log button
373 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
293 293  
294 -13.  exit button
295 295  
376 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
296 296  
297 297  
298 -LA66 USB LoRaWAN Module not connected
299 299  
380 +== Order Info ==
300 300  
301 -[[image:image-20220723110520-5.png||height="677" width="508"]]
382 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
302 302  
384 +**XX**: The default frequency band
303 303  
386 +* **AS923**: LoRaWAN AS923 band
387 +* **AU915**: LoRaWAN AU915 band
388 +* **EU433**: LoRaWAN EU433 band
389 +* **EU868**: LoRaWAN EU868 band
390 +* **KR920**: LoRaWAN KR920 band
391 +* **US915**: LoRaWAN US915 band
392 +* **IN865**: LoRaWAN IN865 band
393 +* **CN470**: LoRaWAN CN470 band
394 +* **PP**: Peer to Peer LoRa Protocol
304 304  
305 -Connect LA66 USB LoRaWAN Module
396 +== Package Info ==
306 306  
307 -[[image:image-20220723110626-6.png||height="681" width="511"]]
398 +* LA66 USB LoRaWAN Adapter x 1
308 308  
400 += Reference =
309 309  
402 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
310 310  
311 -=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
312 -
313 -
314 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
315 -
316 -
317 -[[image:image-20220723134549-8.png]]
318 -
319 -
320 -
321 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
322 -
323 -
324 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
325 -
326 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
327 -
328 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
329 -
330 -
331 -Example output in NodeRed is as below:
332 -
333 -[[image:image-20220723144339-1.png]]
334 -
335 -
336 -
337 -== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
338 -
339 -
340 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
341 -
342 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
343 -
344 -
345 -[[image:image-20220723150132-2.png]]
346 -
347 -
348 -
349 -= 2.  FAQ =
350 -
351 -
352 -== 2.1  How to Compile Source Code for LA66? ==
353 -
354 -
355 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
356 -
357 -
358 -
359 -= 3.  Order Info =
360 -
361 -
362 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
363 -
364 -
365 -(% style="color:blue" %)**XXX**(%%): The default frequency band
366 -
367 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
368 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
369 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
370 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
371 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
372 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
373 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
374 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
375 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
376 -
377 -
378 -
379 -
380 -= 4.  Reference =
381 -
382 -
383 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
384 -
385 -
386 -
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content