Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 149.5
edited by Xiaoling
on 2022/08/17 10:01
Change comment: There is no comment for this version
To version 87.7
edited by Xiaoling
on 2022/07/13 10:00
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -1,69 +1,114 @@
1 1  
2 2  
3 -**Table of Contents:**
4 -
5 5  {{toc/}}
6 6  
7 7  
8 8  
7 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
10 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
13 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
15 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 16  
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 -(((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 -)))
27 -
28 -(((
29 29  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 -)))
31 31  
32 -(((
33 33  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 -)))
35 35  
36 -(((
37 37  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 -)))
39 39  
40 40  
41 -
42 42  == 1.2  Features ==
43 43  
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
29 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
34 +* Ultra-long RF range
56 56  
57 57  
58 58  
59 -
60 60  == 1.3  Specification ==
61 61  
40 +* CPU: 32-bit 48 MHz
41 +* Flash: 256KB
42 +* RAM: 64KB
43 +* Input Power Range: 1.8v ~~ 3.7v
44 +* Power Consumption: < 4uA.
45 +* Frequency Range: 150 MHz ~~ 960 MHz
46 +* Maximum Power +22 dBm constant RF output
47 +* High sensitivity: -148 dBm
48 +* Temperature:
49 +** Storage: -55 ~~ +125℃
50 +** Operating: -40 ~~ +85℃
51 +* Humidity:
52 +** Storage: 5 ~~ 95% (Non-Condensing)
53 +** Operating: 10 ~~ 95% (Non-Condensing)
54 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
55 +* LoRa Rx current: <9 mA
56 +* I/O Voltage: 3.3v
62 62  
58 +
59 +
60 +== 1.4  AT Command ==
61 +
62 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
63 +
64 +
65 +== 1.5  Dimension ==
66 +
67 +[[image:image-20220517072526-1.png]]
68 +
69 +
70 +
71 +== 1.6  Pin Mapping ==
72 +
73 +
74 +[[image:image-20220523101537-1.png]]
75 +
76 +
77 +
78 +== 1.7  Land Pattern ==
79 +
80 +[[image:image-20220517072821-2.png]]
81 +
82 +
83 +
84 += 2.  LA66 LoRaWAN Shield =
85 +
86 +
87 +== 2.1  Overview ==
88 +
89 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
90 +
91 +
92 +== 2.2  Features ==
93 +
94 +* Arduino Shield base on LA66 LoRaWAN module
95 +* Support LoRaWAN v1.0.4 protocol
96 +* Support peer-to-peer protocol
97 +* TCXO crystal to ensure RF performance on low temperature
98 +* SMA connector
99 +* Available in different frequency LoRaWAN frequency bands.
100 +* World-wide unique OTAA keys.
101 +* AT Command via UART-TTL interface
102 +* Firmware upgradable via UART interface
103 +* Ultra-long RF range
104 +
105 +== 2.3  Specification ==
106 +
63 63  * CPU: 32-bit 48 MHz
64 64  * Flash: 256KB
65 65  * RAM: 64KB
66 -* Input Power Range: 5v
110 +* Input Power Range: 1.8v ~~ 3.7v
111 +* Power Consumption: < 4uA.
67 67  * Frequency Range: 150 MHz ~~ 960 MHz
68 68  * Maximum Power +22 dBm constant RF output
69 69  * High sensitivity: -148 dBm
... ... @@ -75,281 +75,306 @@
75 75  ** Operating: 10 ~~ 95% (Non-Condensing)
76 76  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
77 77  * LoRa Rx current: <9 mA
123 +* I/O Voltage: 3.3v
78 78  
125 +== 2.4  Pin Mapping & LED ==
79 79  
80 80  
81 81  
82 -== 1.4  Pin Mapping & LED ==
129 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
83 83  
84 -[[image:image-20220813183239-3.png||height="526" width="662"]]
85 85  
86 86  
133 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
87 87  
88 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
89 89  
90 90  
91 -(((
92 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
93 -)))
137 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
94 94  
95 95  
96 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
97 97  
141 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
98 98  
99 -[[image:image-20220723100027-1.png]]
100 100  
144 +=== 2.8.1  Items needed for update ===
101 101  
102 -Open the serial port tool
146 +1. LA66 LoRaWAN Shield
147 +1. Arduino
148 +1. USB TO TTL Adapter
103 103  
104 -[[image:image-20220602161617-8.png]]
150 +[[image:image-20220602100052-2.png||height="385" width="600"]]
105 105  
106 -[[image:image-20220602161718-9.png||height="457" width="800"]]
107 107  
153 +=== 2.8.2  Connection ===
108 108  
109 109  
110 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
156 +[[image:image-20220602101311-3.png||height="276" width="600"]]
111 111  
112 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
113 113  
159 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
114 114  
115 -[[image:image-20220602161935-10.png||height="498" width="800"]]
116 116  
162 +(% style="background-color:yellow" %)**GND  <-> GND
163 +TXD  <->  TXD
164 +RXD  <->  RXD**
117 117  
118 118  
119 -(% style="color:blue" %)**3. See Uplink Command**
167 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
120 120  
121 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
169 +Connect USB TTL Adapter to PC after connecting the wires
122 122  
123 -example: AT+SENDB=01,02,8,05820802581ea0a5
124 124  
125 -[[image:image-20220602162157-11.png||height="497" width="800"]]
172 +[[image:image-20220602102240-4.png||height="304" width="600"]]
126 126  
127 127  
175 +=== 2.8.3  Upgrade steps ===
128 128  
129 -(% style="color:blue" %)**4. Check to see if TTN received the message**
130 130  
178 +==== 1.  Switch SW1 to put in ISP position ====
131 131  
132 132  
133 -[[image:image-20220817093644-1.png]]
181 +[[image:image-20220602102824-5.png||height="306" width="600"]]
134 134  
135 135  
184 +==== 2.  Press the RST switch once ====
136 136  
137 -== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
186 +[[image:image-20220602104701-12.png||height="285" width="600"]]
138 138  
139 139  
140 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
189 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
141 141  
142 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
143 143  
144 -(% style="color:red" %)**Preconditions:**
192 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
145 145  
146 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
147 147  
148 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
195 +[[image:image-20220602103227-6.png]]
149 149  
150 150  
198 +[[image:image-20220602103357-7.png]]
151 151  
152 -(% style="color:blue" %)**Steps for usage:**
153 153  
154 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
155 155  
156 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
202 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
203 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
157 157  
158 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
159 159  
206 +[[image:image-20220602103844-8.png]]
160 160  
161 161  
162 -== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
163 163  
210 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
211 +(% style="color:blue" %)**3. Select the bin file to burn**
164 164  
165 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
166 166  
214 +[[image:image-20220602104144-9.png]]
167 167  
168 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
169 169  
170 -[[image:image-20220723100439-2.png]]
217 +[[image:image-20220602104251-10.png]]
171 171  
172 172  
220 +[[image:image-20220602104402-11.png]]
173 173  
174 -(% style="color:blue" %)**2. Install Minicom in RPi.**
175 175  
176 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
177 177  
178 - (% style="background-color:yellow" %)**apt update**
224 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
225 +(% style="color:blue" %)**4. Click to start the download**
179 179  
180 - (% style="background-color:yellow" %)**apt install minicom**
227 +[[image:image-20220602104923-13.png]]
181 181  
182 182  
183 -Use minicom to connect to the RPI's terminal
230 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
231 +(% style="color:blue" %)**5. Check update process**
184 184  
185 -[[image:image-20220602153146-3.png||height="439" width="500"]]
186 186  
234 +[[image:image-20220602104948-14.png]]
187 187  
188 188  
189 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
190 190  
191 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
238 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
239 +(% style="color:blue" %)**The following picture shows that the burning is successful**
192 192  
241 +[[image:image-20220602105251-15.png]]
193 193  
194 -[[image:image-20220602154928-5.png||height="436" width="500"]]
195 195  
196 196  
245 += 3.  LA66 USB LoRaWAN Adapter =
197 197  
198 -(% style="color:blue" %)**4. Send Uplink message**
199 199  
200 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
248 +== 3.1  Overview ==
201 201  
202 -example: AT+SENDB=01,02,8,05820802581ea0a5
250 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
203 203  
204 204  
205 -[[image:image-20220602160339-6.png||height="517" width="600"]]
253 +== 3.2  Features ==
206 206  
255 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
256 +* Ultra-long RF range
257 +* Support LoRaWAN v1.0.4 protocol
258 +* Support peer-to-peer protocol
259 +* TCXO crystal to ensure RF performance on low temperature
260 +* Spring RF antenna
261 +* Available in different frequency LoRaWAN frequency bands.
262 +* World-wide unique OTAA keys.
263 +* AT Command via UART-TTL interface
264 +* Firmware upgradable via UART interface
207 207  
266 +== 3.3  Specification ==
208 208  
209 -Check to see if TTN received the message
268 +* CPU: 32-bit 48 MHz
269 +* Flash: 256KB
270 +* RAM: 64KB
271 +* Input Power Range: 5v
272 +* Frequency Range: 150 MHz ~~ 960 MHz
273 +* Maximum Power +22 dBm constant RF output
274 +* High sensitivity: -148 dBm
275 +* Temperature:
276 +** Storage: -55 ~~ +125℃
277 +** Operating: -40 ~~ +85℃
278 +* Humidity:
279 +** Storage: 5 ~~ 95% (Non-Condensing)
280 +** Operating: 10 ~~ 95% (Non-Condensing)
281 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
282 +* LoRa Rx current: <9 mA
210 210  
211 -[[image:image-20220602160627-7.png||height="369" width="800"]]
284 +== 3.4  Pin Mapping & LED ==
212 212  
213 213  
214 214  
215 -== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
288 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
216 216  
217 217  
218 -=== 1.8.1  Hardware and Software Connection ===
291 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
219 219  
220 220  
294 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
221 221  
222 -==== (% style="color:blue" %)**Overview：**(%%) ====
223 223  
297 +[[image:image-20220602171217-1.png||height="538" width="800"]]
224 224  
225 -(((
226 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
227 227  
228 -* Send real-time location information of mobile phone to LoRaWAN network.
229 -* Check LoRaWAN network signal strengh.
230 -* Manually send messages to LoRaWAN network.
231 -)))
300 +Open the serial port tool
232 232  
302 +[[image:image-20220602161617-8.png]]
233 233  
304 +[[image:image-20220602161718-9.png||height="457" width="800"]]
234 234  
235 235  
236 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
237 237  
238 -A USB to Type-C adapter is needed to connect to a Mobile phone.
308 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
239 239  
240 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
310 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
241 241  
242 -[[image:image-20220813174353-2.png||height="360" width="313"]]
243 243  
313 +[[image:image-20220602161935-10.png||height="498" width="800"]]
244 244  
245 245  
246 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
247 247  
248 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
317 +(% style="color:blue" %)**3. See Uplink Command**
249 249  
250 -[[image:image-20220813173738-1.png]]
319 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
251 251  
321 +example: AT+SENDB=01,02,8,05820802581ea0a5
252 252  
323 +[[image:image-20220602162157-11.png||height="497" width="800"]]
253 253  
254 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
255 255  
256 -Function and page introduction
257 257  
258 -[[image:image-20220723113448-7.png||height="995" width="450"]]
327 +(% style="color:blue" %)**4. Check to see if TTN received the message**
259 259  
260 -**Block Explain:**
329 +[[image:image-20220602162331-12.png||height="420" width="800"]]
261 261  
262 -1.  Display LA66 USB LoRaWAN Module connection status
263 263  
264 -2.  Check and reconnect
265 265  
266 -3.  Turn send timestamps on or off
333 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
267 267  
268 -4.  Display LoRaWan connection status
269 269  
270 -5.  Check LoRaWan connection status
336 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
271 271  
272 -6.  The RSSI value of the node when the ACK is received
273 273  
274 -7.  Node's Signal Strength Icon
339 +(% style="color:red" %)**Preconditions:**
275 275  
276 -8.  Configure Location Uplink Interval
341 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
277 277  
278 -9.  AT command input box
343 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
279 279  
280 -10.  Send Button:  Send input box info to LA66 USB Adapter
281 281  
282 -11.  Output Log from LA66 USB adapter
283 283  
284 -12.  clear log button
347 +(% style="color:blue" %)**Steps for usage:**
285 285  
286 -13.  exit button
349 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
287 287  
351 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
288 288  
289 -LA66 USB LoRaWAN Module not connected
353 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
290 290  
291 -[[image:image-20220723110520-5.png||height="677" width="508"]]
292 292  
293 293  
357 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
294 294  
295 -Connect LA66 USB LoRaWAN Module
296 296  
297 -[[image:image-20220723110626-6.png||height="681" width="511"]]
360 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
298 298  
299 299  
363 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
300 300  
301 -=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
365 +[[image:image-20220602171233-2.png||height="538" width="800"]]
302 302  
303 303  
304 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
305 305  
306 -[[image:image-20220723134549-8.png]]
369 +(% style="color:blue" %)**2. Install Minicom in RPi.**
307 307  
371 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
308 308  
373 + (% style="background-color:yellow" %)**apt update**
309 309  
310 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
375 + (% style="background-color:yellow" %)**apt install minicom**
311 311  
312 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
313 313  
314 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
378 +Use minicom to connect to the RPI's terminal
315 315  
316 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
380 +[[image:image-20220602153146-3.png||height="439" width="500"]]
317 317  
318 318  
319 -Example output in NodeRed is as below:
320 320  
321 -[[image:image-20220723144339-1.png]]
384 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
385 +(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
322 322  
387 +[[image:image-20220602154928-5.png||height="436" width="500"]]
323 323  
324 324  
325 -== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
326 326  
391 +(% style="color:blue" %)**4. Send Uplink message**
327 327  
328 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
393 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
329 329  
330 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
395 +example: AT+SENDB=01,02,8,05820802581ea0a5
331 331  
332 332  
333 -[[image:image-20220723150132-2.png]]
398 +[[image:image-20220602160339-6.png||height="517" width="600"]]
334 334  
335 335  
336 336  
337 -= 2.  FAQ =
402 +Check to see if TTN received the message
338 338  
404 +[[image:image-20220602160627-7.png||height="369" width="800"]]
339 339  
340 -== 2.1  How to Compile Source Code for LA66? ==
341 341  
342 342  
343 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
408 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
344 344  
345 345  
346 346  
347 -= 3.  Order Info =
412 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
348 348  
349 349  
350 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
351 351  
352 352  
417 += 4.  Order Info =
418 +
419 +
420 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
421 +
422 +
353 353  (% style="color:blue" %)**XXX**(%%): The default frequency band
354 354  
355 355  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -365,7 +365,8 @@
365 365  
366 366  
367 367  
368 -= 4.  Reference =
438 += 5.  Reference =
369 369  
440 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
370 370  
371 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
442 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content