Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 149.3
edited by Xiaoling
on 2022/08/17 09:50
Change comment: There is no comment for this version
To version 87.9
edited by Xiaoling
on 2022/07/13 10:02
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -1,67 +1,116 @@
1 1  
2 2  
3 -**Table of Contents:**
4 -
5 5  {{toc/}}
6 6  
7 7  
8 8  
7 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
10 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
13 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
15 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 16  
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
17 +Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
18 18  
19 +Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
19 19  
20 -(((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 -)))
21 +LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
23 23  
24 -(((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 -)))
27 27  
28 -(((
29 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 -)))
24 +== 1.2  Features ==
31 31  
32 -(((
33 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 -)))
26 +* Support LoRaWAN v1.0.4 protocol
27 +* Support peer-to-peer protocol
28 +* TCXO crystal to ensure RF performance on low temperature
29 +* SMD Antenna pad and i-pex antenna connector
30 +* Available in different frequency LoRaWAN frequency bands.
31 +* World-wide unique OTAA keys.
32 +* AT Command via UART-TTL interface
33 +* Firmware upgradable via UART interface
34 +* Ultra-long RF range
35 35  
36 -(((
37 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 -)))
39 39  
40 40  
38 +== 1.3  Specification ==
41 41  
42 -== 1.2  Features ==
40 +* CPU: 32-bit 48 MHz
41 +* Flash: 256KB
42 +* RAM: 64KB
43 +* Input Power Range: 1.8v ~~ 3.7v
44 +* Power Consumption: < 4uA.
45 +* Frequency Range: 150 MHz ~~ 960 MHz
46 +* Maximum Power +22 dBm constant RF output
47 +* High sensitivity: -148 dBm
48 +* Temperature:
49 +** Storage: -55 ~~ +125℃
50 +** Operating: -40 ~~ +85℃
51 +* Humidity:
52 +** Storage: 5 ~~ 95% (Non-Condensing)
53 +** Operating: 10 ~~ 95% (Non-Condensing)
54 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
55 +* LoRa Rx current: <9 mA
56 +* I/O Voltage: 3.3v
43 43  
44 44  
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
59 +
60 +== 1.4  AT Command ==
61 +
62 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
63 +
64 +
65 +== 1.5  Dimension ==
66 +
67 +[[image:image-20220517072526-1.png]]
68 +
69 +
70 +
71 +== 1.6  Pin Mapping ==
72 +
73 +
74 +[[image:image-20220523101537-1.png]]
75 +
76 +
77 +
78 +== 1.7  Land Pattern ==
79 +
80 +[[image:image-20220517072821-2.png]]
81 +
82 +
83 +
84 += 2.  LA66 LoRaWAN Shield =
85 +
86 +
87 +== 2.1  Overview ==
88 +
89 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
90 +
91 +
92 +== 2.2  Features ==
93 +
94 +* Arduino Shield base on LA66 LoRaWAN module
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
98 +* SMA connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
103 +* Ultra-long RF range
56 56  
57 57  
58 -== 1.3  Specification ==
59 59  
107 +== 2.3  Specification ==
60 60  
61 61  * CPU: 32-bit 48 MHz
62 62  * Flash: 256KB
63 63  * RAM: 64KB
64 -* Input Power Range: 5v
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
65 65  * Frequency Range: 150 MHz ~~ 960 MHz
66 66  * Maximum Power +22 dBm constant RF output
67 67  * High sensitivity: -148 dBm
... ... @@ -73,278 +73,309 @@
73 73  ** Operating: 10 ~~ 95% (Non-Condensing)
74 74  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
75 75  * LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
76 76  
77 77  
78 -== 1.4  Pin Mapping & LED ==
79 79  
80 -[[image:image-20220813183239-3.png||height="526" width="662"]]
129 +== 2.4  Pin Mapping & LED ==
81 81  
82 82  
83 83  
84 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
133 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
85 85  
86 86  
87 -(((
88 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
89 -)))
90 90  
137 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
91 91  
92 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
93 93  
94 94  
95 -[[image:image-20220723100027-1.png]]
141 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
96 96  
97 97  
98 -Open the serial port tool
99 99  
100 -[[image:image-20220602161617-8.png]]
145 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
101 101  
102 -[[image:image-20220602161718-9.png||height="457" width="800"]]
103 103  
148 +=== 2.8.1  Items needed for update ===
104 104  
150 +1. LA66 LoRaWAN Shield
151 +1. Arduino
152 +1. USB TO TTL Adapter
105 105  
106 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
154 +[[image:image-20220602100052-2.png||height="385" width="600"]]
107 107  
108 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
109 109  
157 +=== 2.8.2  Connection ===
110 110  
111 -[[image:image-20220602161935-10.png||height="498" width="800"]]
112 112  
160 +[[image:image-20220602101311-3.png||height="276" width="600"]]
113 113  
114 114  
115 -(% style="color:blue" %)**3. See Uplink Command**
163 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
116 116  
117 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
165 +(% style="background-color:yellow" %)**GND  <-> GND
166 +TXD  <->  TXD
167 +RXD  <->  RXD**
118 118  
119 -example: AT+SENDB=01,02,8,05820802581ea0a5
120 120  
121 -[[image:image-20220602162157-11.png||height="497" width="800"]]
170 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
122 122  
172 +Connect USB TTL Adapter to PC after connecting the wires
123 123  
124 124  
125 -(% style="color:blue" %)**4. Check to see if TTN received the message**
175 +[[image:image-20220602102240-4.png||height="304" width="600"]]
126 126  
127 127  
178 +=== 2.8.3  Upgrade steps ===
128 128  
129 -[[image:image-20220817093644-1.png]]
130 130  
181 +==== 1.  Switch SW1 to put in ISP position ====
131 131  
132 132  
133 -== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
184 +[[image:image-20220602102824-5.png||height="306" width="600"]]
134 134  
135 135  
136 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
137 137  
138 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
188 +==== 2.  Press the RST switch once ====
139 139  
140 -(% style="color:red" %)**Preconditions:**
190 +[[image:image-20220602104701-12.png||height="285" width="600"]]
141 141  
142 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
143 143  
144 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
145 145  
194 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
146 146  
147 147  
148 -(% style="color:blue" %)**Steps for usage:**
197 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
149 149  
150 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
151 151  
152 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
200 +[[image:image-20220602103227-6.png]]
153 153  
154 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
155 155  
203 +[[image:image-20220602103357-7.png]]
156 156  
157 157  
158 -== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
159 159  
207 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
208 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
160 160  
161 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
162 162  
211 +[[image:image-20220602103844-8.png]]
163 163  
164 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
165 165  
166 -[[image:image-20220723100439-2.png]]
167 167  
215 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
216 +(% style="color:blue" %)**3. Select the bin file to burn**
168 168  
169 169  
170 -(% style="color:blue" %)**2. Install Minicom in RPi.**
219 +[[image:image-20220602104144-9.png]]
171 171  
172 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
173 173  
174 - (% style="background-color:yellow" %)**apt update**
222 +[[image:image-20220602104251-10.png]]
175 175  
176 - (% style="background-color:yellow" %)**apt install minicom**
177 177  
225 +[[image:image-20220602104402-11.png]]
178 178  
179 -Use minicom to connect to the RPI's terminal
180 180  
181 -[[image:image-20220602153146-3.png||height="439" width="500"]]
182 182  
229 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
230 +(% style="color:blue" %)**4. Click to start the download**
183 183  
232 +[[image:image-20220602104923-13.png]]
184 184  
185 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
186 186  
187 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
235 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
236 +(% style="color:blue" %)**5. Check update process**
188 188  
189 189  
190 -[[image:image-20220602154928-5.png||height="436" width="500"]]
239 +[[image:image-20220602104948-14.png]]
191 191  
192 192  
193 193  
194 -(% style="color:blue" %)**4. Send Uplink message**
243 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
244 +(% style="color:blue" %)**The following picture shows that the burning is successful**
195 195  
196 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
246 +[[image:image-20220602105251-15.png]]
197 197  
198 -example: AT+SENDB=01,02,8,05820802581ea0a5
199 199  
200 200  
201 -[[image:image-20220602160339-6.png||height="517" width="600"]]
250 += 3.  LA66 USB LoRaWAN Adapter =
202 202  
203 203  
253 +== 3.1  Overview ==
204 204  
205 -Check to see if TTN received the message
255 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
206 206  
207 -[[image:image-20220602160627-7.png||height="369" width="800"]]
208 208  
258 +== 3.2  Features ==
209 209  
260 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
261 +* Ultra-long RF range
262 +* Support LoRaWAN v1.0.4 protocol
263 +* Support peer-to-peer protocol
264 +* TCXO crystal to ensure RF performance on low temperature
265 +* Spring RF antenna
266 +* Available in different frequency LoRaWAN frequency bands.
267 +* World-wide unique OTAA keys.
268 +* AT Command via UART-TTL interface
269 +* Firmware upgradable via UART interface
210 210  
211 -== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
271 +== 3.3  Specification ==
212 212  
273 +* CPU: 32-bit 48 MHz
274 +* Flash: 256KB
275 +* RAM: 64KB
276 +* Input Power Range: 5v
277 +* Frequency Range: 150 MHz ~~ 960 MHz
278 +* Maximum Power +22 dBm constant RF output
279 +* High sensitivity: -148 dBm
280 +* Temperature:
281 +** Storage: -55 ~~ +125℃
282 +** Operating: -40 ~~ +85℃
283 +* Humidity:
284 +** Storage: 5 ~~ 95% (Non-Condensing)
285 +** Operating: 10 ~~ 95% (Non-Condensing)
286 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
287 +* LoRa Rx current: <9 mA
213 213  
214 -=== 1.8.1  Hardware and Software Connection ===
289 +== 3.4  Pin Mapping & LED ==
215 215  
216 216  
217 217  
218 -==== (% style="color:blue" %)**Overview：**(%%) ====
293 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
219 219  
220 220  
221 -(((
222 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
296 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
223 223  
224 -* Send real-time location information of mobile phone to LoRaWAN network.
225 -* Check LoRaWAN network signal strengh.
226 -* Manually send messages to LoRaWAN network.
227 -)))
228 228  
299 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
229 229  
230 230  
302 +[[image:image-20220602171217-1.png||height="538" width="800"]]
231 231  
232 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
233 233  
234 -A USB to Type-C adapter is needed to connect to a Mobile phone.
305 +Open the serial port tool
235 235  
236 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
307 +[[image:image-20220602161617-8.png]]
237 237  
238 -[[image:image-20220813174353-2.png||height="360" width="313"]]
309 +[[image:image-20220602161718-9.png||height="457" width="800"]]
239 239  
240 240  
241 241  
242 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
313 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
243 243  
244 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
315 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
245 245  
246 -[[image:image-20220813173738-1.png]]
247 247  
318 +[[image:image-20220602161935-10.png||height="498" width="800"]]
248 248  
249 249  
250 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
251 251  
252 -Function and page introduction
322 +(% style="color:blue" %)**3. See Uplink Command**
253 253  
254 -[[image:image-20220723113448-7.png||height="995" width="450"]]
324 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
255 255  
256 -**Block Explain:**
326 +example: AT+SENDB=01,02,8,05820802581ea0a5
257 257  
258 -1.  Display LA66 USB LoRaWAN Module connection status
328 +[[image:image-20220602162157-11.png||height="497" width="800"]]
259 259  
260 -2.  Check and reconnect
261 261  
262 -3.  Turn send timestamps on or off
263 263  
264 -4.  Display LoRaWan connection status
332 +(% style="color:blue" %)**4. Check to see if TTN received the message**
265 265  
266 -5.  Check LoRaWan connection status
334 +[[image:image-20220602162331-12.png||height="420" width="800"]]
267 267  
268 -6.  The RSSI value of the node when the ACK is received
269 269  
270 -7.  Node's Signal Strength Icon
271 271  
272 -8.  Configure Location Uplink Interval
338 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
273 273  
274 -9.  AT command input box
275 275  
276 -10.  Send Button:  Send input box info to LA66 USB Adapter
341 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
277 277  
278 -11.  Output Log from LA66 USB adapter
279 279  
280 -12.  clear log button
344 +(% style="color:red" %)**Preconditions:**
281 281  
282 -13.  exit button
346 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
283 283  
348 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
284 284  
285 -LA66 USB LoRaWAN Module not connected
286 286  
287 -[[image:image-20220723110520-5.png||height="677" width="508"]]
288 288  
352 +(% style="color:blue" %)**Steps for usage:**
289 289  
354 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
290 290  
291 -Connect LA66 USB LoRaWAN Module
356 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
292 292  
293 -[[image:image-20220723110626-6.png||height="681" width="511"]]
358 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
294 294  
295 295  
296 296  
297 -=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
362 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
298 298  
299 299  
300 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
365 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
301 301  
302 -[[image:image-20220723134549-8.png]]
303 303  
368 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
304 304  
370 +[[image:image-20220602171233-2.png||height="538" width="800"]]
305 305  
306 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
307 307  
308 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
309 309  
310 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
374 +(% style="color:blue" %)**2. Install Minicom in RPi.**
311 311  
312 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
376 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
313 313  
378 + (% style="background-color:yellow" %)**apt update**
314 314  
315 -Example output in NodeRed is as below:
380 + (% style="background-color:yellow" %)**apt install minicom**
316 316  
317 -[[image:image-20220723144339-1.png]]
318 318  
383 +Use minicom to connect to the RPI's terminal
319 319  
385 +[[image:image-20220602153146-3.png||height="439" width="500"]]
320 320  
321 -== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
322 322  
323 323  
324 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
389 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
390 +(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
325 325  
326 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
392 +[[image:image-20220602154928-5.png||height="436" width="500"]]
327 327  
328 -[[image:image-20220723150132-2.png]]
329 329  
330 330  
396 +(% style="color:blue" %)**4. Send Uplink message**
331 331  
332 -= 2.  FAQ =
398 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
333 333  
400 +example: AT+SENDB=01,02,8,05820802581ea0a5
334 334  
335 -== 2.1  How to Compile Source Code for LA66? ==
336 336  
403 +[[image:image-20220602160339-6.png||height="517" width="600"]]
337 337  
338 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
339 339  
340 340  
407 +Check to see if TTN received the message
341 341  
342 -= 3.  Order Info =
409 +[[image:image-20220602160627-7.png||height="369" width="800"]]
343 343  
344 344  
345 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
346 346  
413 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
347 347  
415 +
416 +
417 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
418 +
419 +
420 +
421 +
422 += 4.  Order Info =
423 +
424 +
425 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
426 +
427 +
348 348  (% style="color:blue" %)**XXX**(%%): The default frequency band
349 349  
350 350  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -360,8 +360,8 @@
360 360  
361 361  
362 362  
443 += 5.  Reference =
363 363  
364 -= 4.  Reference =
445 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
365 365  
366 -
367 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
447 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content