Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 149.3
edited by Xiaoling
on 2022/08/17 09:50
Change comment: There is no comment for this version
To version 87.15
edited by Xiaoling
on 2022/07/13 10:09
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -6,23 +6,18 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
15 -
16 -
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 20  (((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
16 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
22 22  )))
23 23  
24 24  (((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
20 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 26  )))
27 27  
28 28  (((
... ... @@ -38,30 +38,96 @@
38 38  )))
39 39  
40 40  
41 -
42 42  == 1.2  Features ==
43 43  
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
41 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
46 +* Ultra-long RF range
56 56  
57 57  
49 +
58 58  == 1.3  Specification ==
59 59  
52 +* CPU: 32-bit 48 MHz
53 +* Flash: 256KB
54 +* RAM: 64KB
55 +* Input Power Range: 1.8v ~~ 3.7v
56 +* Power Consumption: < 4uA.
57 +* Frequency Range: 150 MHz ~~ 960 MHz
58 +* Maximum Power +22 dBm constant RF output
59 +* High sensitivity: -148 dBm
60 +* Temperature:
61 +** Storage: -55 ~~ +125℃
62 +** Operating: -40 ~~ +85℃
63 +* Humidity:
64 +** Storage: 5 ~~ 95% (Non-Condensing)
65 +** Operating: 10 ~~ 95% (Non-Condensing)
66 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
67 +* LoRa Rx current: <9 mA
68 +* I/O Voltage: 3.3v
60 60  
70 +
71 +
72 +== 1.4  AT Command ==
73 +
74 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
75 +
76 +
77 +== 1.5  Dimension ==
78 +
79 +[[image:image-20220517072526-1.png]]
80 +
81 +
82 +
83 +== 1.6  Pin Mapping ==
84 +
85 +
86 +[[image:image-20220523101537-1.png]]
87 +
88 +
89 +
90 +== 1.7  Land Pattern ==
91 +
92 +[[image:image-20220517072821-2.png]]
93 +
94 +
95 +
96 += 2.  LA66 LoRaWAN Shield =
97 +
98 +
99 +== 2.1  Overview ==
100 +
101 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
102 +
103 +
104 +== 2.2  Features ==
105 +
106 +* Arduino Shield base on LA66 LoRaWAN module
107 +* Support LoRaWAN v1.0.4 protocol
108 +* Support peer-to-peer protocol
109 +* TCXO crystal to ensure RF performance on low temperature
110 +* SMA connector
111 +* Available in different frequency LoRaWAN frequency bands.
112 +* World-wide unique OTAA keys.
113 +* AT Command via UART-TTL interface
114 +* Firmware upgradable via UART interface
115 +* Ultra-long RF range
116 +
117 +
118 +
119 +== 2.3  Specification ==
120 +
61 61  * CPU: 32-bit 48 MHz
62 62  * Flash: 256KB
63 63  * RAM: 64KB
64 -* Input Power Range: 5v
124 +* Input Power Range: 1.8v ~~ 3.7v
125 +* Power Consumption: < 4uA.
65 65  * Frequency Range: 150 MHz ~~ 960 MHz
66 66  * Maximum Power +22 dBm constant RF output
67 67  * High sensitivity: -148 dBm
... ... @@ -73,278 +73,320 @@
73 73  ** Operating: 10 ~~ 95% (Non-Condensing)
74 74  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
75 75  * LoRa Rx current: <9 mA
137 +* I/O Voltage: 3.3v
76 76  
77 77  
78 -== 1.4  Pin Mapping & LED ==
79 79  
80 -[[image:image-20220813183239-3.png||height="526" width="662"]]
141 +== 2.4  Pin Mapping & LED ==
81 81  
82 82  
83 83  
84 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
145 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
85 85  
86 86  
87 -(((
88 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
89 -)))
90 90  
149 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
91 91  
92 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
93 93  
94 94  
95 -[[image:image-20220723100027-1.png]]
153 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
96 96  
97 97  
98 -Open the serial port tool
99 99  
100 -[[image:image-20220602161617-8.png]]
157 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
101 101  
102 -[[image:image-20220602161718-9.png||height="457" width="800"]]
103 103  
160 +=== 2.8.1  Items needed for update ===
104 104  
162 +1. LA66 LoRaWAN Shield
163 +1. Arduino
164 +1. USB TO TTL Adapter
105 105  
106 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
107 107  
108 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
109 109  
110 110  
111 -[[image:image-20220602161935-10.png||height="498" width="800"]]
169 +[[image:image-20220602100052-2.png||height="385" width="600"]]
112 112  
113 113  
172 +=== 2.8.2  Connection ===
114 114  
115 -(% style="color:blue" %)**3. See Uplink Command**
116 116  
117 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
175 +[[image:image-20220602101311-3.png||height="276" width="600"]]
118 118  
119 -example: AT+SENDB=01,02,8,05820802581ea0a5
120 120  
121 -[[image:image-20220602162157-11.png||height="497" width="800"]]
178 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
122 122  
180 +(% style="background-color:yellow" %)**GND  <-> GND
181 +TXD  <->  TXD
182 +RXD  <->  RXD**
123 123  
124 124  
125 -(% style="color:blue" %)**4. Check to see if TTN received the message**
185 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
126 126  
187 +Connect USB TTL Adapter to PC after connecting the wires
127 127  
128 128  
129 -[[image:image-20220817093644-1.png]]
190 +[[image:image-20220602102240-4.png||height="304" width="600"]]
130 130  
131 131  
193 +=== 2.8.3  Upgrade steps ===
132 132  
133 -== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
134 134  
196 +==== 1.  Switch SW1 to put in ISP position ====
135 135  
136 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
137 137  
138 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
199 +[[image:image-20220602102824-5.png||height="306" width="600"]]
139 139  
140 -(% style="color:red" %)**Preconditions:**
141 141  
142 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
143 143  
144 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
203 +==== 2.  Press the RST switch once ====
145 145  
146 146  
206 +[[image:image-20220602104701-12.png||height="285" width="600"]]
147 147  
148 -(% style="color:blue" %)**Steps for usage:**
149 149  
150 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
151 151  
152 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
210 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
153 153  
154 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
155 155  
213 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
156 156  
157 157  
158 -== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
216 +[[image:image-20220602103227-6.png]]
159 159  
160 160  
161 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
219 +[[image:image-20220602103357-7.png]]
162 162  
163 163  
164 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
165 165  
166 -[[image:image-20220723100439-2.png]]
223 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
224 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
167 167  
168 168  
227 +[[image:image-20220602103844-8.png]]
169 169  
170 -(% style="color:blue" %)**2. Install Minicom in RPi.**
171 171  
172 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
173 173  
174 - (% style="background-color:yellow" %)**apt update**
231 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
232 +(% style="color:blue" %)**3. Select the bin file to burn**
175 175  
176 - (% style="background-color:yellow" %)**apt install minicom**
177 177  
235 +[[image:image-20220602104144-9.png]]
178 178  
179 -Use minicom to connect to the RPI's terminal
180 180  
181 -[[image:image-20220602153146-3.png||height="439" width="500"]]
238 +[[image:image-20220602104251-10.png]]
182 182  
183 183  
241 +[[image:image-20220602104402-11.png]]
184 184  
185 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
186 186  
187 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
188 188  
245 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
246 +(% style="color:blue" %)**4. Click to start the download**
189 189  
190 -[[image:image-20220602154928-5.png||height="436" width="500"]]
248 +[[image:image-20220602104923-13.png]]
191 191  
192 192  
193 193  
194 -(% style="color:blue" %)**4. Send Uplink message**
252 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
253 +(% style="color:blue" %)**5. Check update process**
195 195  
196 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
197 197  
198 -example: AT+SENDB=01,02,8,05820802581ea0a5
256 +[[image:image-20220602104948-14.png]]
199 199  
200 200  
201 -[[image:image-20220602160339-6.png||height="517" width="600"]]
202 202  
260 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
261 +(% style="color:blue" %)**The following picture shows that the burning is successful**
203 203  
263 +[[image:image-20220602105251-15.png]]
204 204  
205 -Check to see if TTN received the message
206 206  
207 -[[image:image-20220602160627-7.png||height="369" width="800"]]
208 208  
267 += 3.  LA66 USB LoRaWAN Adapter =
209 209  
210 210  
211 -== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
270 +== 3.1  Overview ==
212 212  
272 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
213 213  
214 -=== 1.8.1  Hardware and Software Connection ===
215 215  
275 +== 3.2  Features ==
216 216  
277 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
278 +* Ultra-long RF range
279 +* Support LoRaWAN v1.0.4 protocol
280 +* Support peer-to-peer protocol
281 +* TCXO crystal to ensure RF performance on low temperature
282 +* Spring RF antenna
283 +* Available in different frequency LoRaWAN frequency bands.
284 +* World-wide unique OTAA keys.
285 +* AT Command via UART-TTL interface
286 +* Firmware upgradable via UART interface
217 217  
218 -==== (% style="color:blue" %)**Overview：**(%%) ====
219 219  
220 220  
221 -(((
222 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
290 +== 3.3  Specification ==
223 223  
224 -* Send real-time location information of mobile phone to LoRaWAN network.
225 -* Check LoRaWAN network signal strengh.
226 -* Manually send messages to LoRaWAN network.
227 -)))
292 +* CPU: 32-bit 48 MHz
293 +* Flash: 256KB
294 +* RAM: 64KB
295 +* Input Power Range: 5v
296 +* Frequency Range: 150 MHz ~~ 960 MHz
297 +* Maximum Power +22 dBm constant RF output
298 +* High sensitivity: -148 dBm
299 +* Temperature:
300 +** Storage: -55 ~~ +125℃
301 +** Operating: -40 ~~ +85℃
302 +* Humidity:
303 +** Storage: 5 ~~ 95% (Non-Condensing)
304 +** Operating: 10 ~~ 95% (Non-Condensing)
305 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
306 +* LoRa Rx current: <9 mA
228 228  
229 229  
230 230  
310 +== 3.4  Pin Mapping & LED ==
231 231  
232 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
233 233  
234 -A USB to Type-C adapter is needed to connect to a Mobile phone.
235 235  
236 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
314 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
237 237  
238 -[[image:image-20220813174353-2.png||height="360" width="313"]]
239 239  
317 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
240 240  
241 241  
242 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
320 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
243 243  
244 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
245 245  
246 -[[image:image-20220813173738-1.png]]
323 +[[image:image-20220602171217-1.png||height="538" width="800"]]
247 247  
248 248  
326 +Open the serial port tool
249 249  
250 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
328 +[[image:image-20220602161617-8.png]]
251 251  
252 -Function and page introduction
330 +[[image:image-20220602161718-9.png||height="457" width="800"]]
253 253  
254 -[[image:image-20220723113448-7.png||height="995" width="450"]]
255 255  
256 -**Block Explain:**
257 257  
258 -1.  Display LA66 USB LoRaWAN Module connection status
334 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
259 259  
260 -2.  Check and reconnect
336 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
261 261  
262 -3.  Turn send timestamps on or off
263 263  
264 -4.  Display LoRaWan connection status
339 +[[image:image-20220602161935-10.png||height="498" width="800"]]
265 265  
266 -5.  Check LoRaWan connection status
267 267  
268 -6.  The RSSI value of the node when the ACK is received
269 269  
270 -7.  Node's Signal Strength Icon
343 +(% style="color:blue" %)**3. See Uplink Command**
271 271  
272 -8.  Configure Location Uplink Interval
345 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
273 273  
274 -9.  AT command input box
347 +example: AT+SENDB=01,02,8,05820802581ea0a5
275 275  
276 -10.  Send Button:  Send input box info to LA66 USB Adapter
349 +[[image:image-20220602162157-11.png||height="497" width="800"]]
277 277  
278 -11.  Output Log from LA66 USB adapter
279 279  
280 -12.  clear log button
281 281  
282 -13.  exit button
353 +(% style="color:blue" %)**4. Check to see if TTN received the message**
283 283  
355 +[[image:image-20220602162331-12.png||height="420" width="800"]]
284 284  
285 -LA66 USB LoRaWAN Module not connected
286 286  
287 -[[image:image-20220723110520-5.png||height="677" width="508"]]
288 288  
359 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
289 289  
290 290  
291 -Connect LA66 USB LoRaWAN Module
362 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
292 292  
293 -[[image:image-20220723110626-6.png||height="681" width="511"]]
294 294  
365 +(% style="color:red" %)**Preconditions:**
295 295  
367 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
296 296  
297 -=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
369 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
298 298  
299 299  
300 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
301 301  
302 -[[image:image-20220723134549-8.png]]
373 +(% style="color:blue" %)**Steps for usage:**
303 303  
375 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
304 304  
377 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
305 305  
306 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
379 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
307 307  
308 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
309 309  
310 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
311 311  
312 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
383 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
313 313  
314 314  
315 -Example output in NodeRed is as below:
386 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
316 316  
317 -[[image:image-20220723144339-1.png]]
318 318  
389 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
319 319  
391 +[[image:image-20220602171233-2.png||height="538" width="800"]]
320 320  
321 -== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
322 322  
323 323  
324 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
395 +(% style="color:blue" %)**2. Install Minicom in RPi.**
325 325  
326 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
397 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
327 327  
328 -[[image:image-20220723150132-2.png]]
399 + (% style="background-color:yellow" %)**apt update**
329 329  
401 + (% style="background-color:yellow" %)**apt install minicom**
330 330  
331 331  
332 -= 2.  FAQ =
404 +Use minicom to connect to the RPI's terminal
333 333  
406 +[[image:image-20220602153146-3.png||height="439" width="500"]]
334 334  
335 -== 2.1  How to Compile Source Code for LA66? ==
336 336  
337 337  
338 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
410 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
339 339  
412 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
340 340  
341 341  
342 -= 3.  Order Info =
415 +[[image:image-20220602154928-5.png||height="436" width="500"]]
343 343  
344 344  
345 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
346 346  
419 +(% style="color:blue" %)**4. Send Uplink message**
347 347  
421 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
422 +
423 +example: AT+SENDB=01,02,8,05820802581ea0a5
424 +
425 +
426 +[[image:image-20220602160339-6.png||height="517" width="600"]]
427 +
428 +
429 +
430 +Check to see if TTN received the message
431 +
432 +[[image:image-20220602160627-7.png||height="369" width="800"]]
433 +
434 +
435 +
436 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
437 +
438 +
439 +
440 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
441 +
442 +
443 +
444 +
445 += 4.  Order Info =
446 +
447 +
448 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
449 +
450 +
348 348  (% style="color:blue" %)**XXX**(%%): The default frequency band
349 349  
350 350  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -359,9 +359,8 @@
359 359  
360 360  
361 361  
465 += 5.  Reference =
362 362  
467 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
363 363  
364 -= 4.  Reference =
365 -
366 -
367 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
469 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content