Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 149.3
edited by Xiaoling
on 2022/08/17 09:50
Change comment: There is no comment for this version
To version 74.1
edited by Edwin Chen
on 2022/07/03 00:16
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,67 +1,41 @@
1 -
2 -
3 -**Table of Contents:**
4 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 5  {{toc/}}
3 +{{/box}}
6 6  
5 += LA66 LoRaWAN Module =
7 7  
7 +== What is LA66 LoRaWAN Module ==
8 8  
9 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
9 9  
11 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 -
13 -
14 -== 1.1  Overview ==
15 -
16 -
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 -(((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 -)))
27 -
28 -(((
29 29  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 -)))
31 31  
32 -(((
33 33  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 -)))
35 35  
36 -(((
37 37  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 -)))
39 39  
40 40  
20 +== Features ==
41 41  
42 -== 1.2  Features ==
43 -
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
25 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
30 +* Ultra-long RF range
56 56  
32 +== Specification ==
57 57  
58 -== 1.3  Specification ==
59 -
60 -
61 61  * CPU: 32-bit 48 MHz
62 62  * Flash: 256KB
63 63  * RAM: 64KB
64 -* Input Power Range: 5v
37 +* Input Power Range: 1.8v ~~ 3.7v
38 +* Power Consumption: < 4uA.
65 65  * Frequency Range: 150 MHz ~~ 960 MHz
66 66  * Maximum Power +22 dBm constant RF output
67 67  * High sensitivity: -148 dBm
... ... @@ -73,295 +73,338 @@
73 73  ** Operating: 10 ~~ 95% (Non-Condensing)
74 74  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
75 75  * LoRa Rx current: <9 mA
50 +* I/O Voltage: 3.3v
76 76  
52 +== AT Command ==
77 77  
78 -== 1.4  Pin Mapping & LED ==
54 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
79 79  
80 -[[image:image-20220813183239-3.png||height="526" width="662"]]
81 81  
57 +== Dimension ==
82 82  
59 +[[image:image-20220517072526-1.png]]
83 83  
84 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
85 85  
62 +== Pin Mapping ==
86 86  
87 -(((
88 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
89 -)))
64 +[[image:image-20220523101537-1.png]]
90 90  
66 +== Land Pattern ==
91 91  
92 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
68 +[[image:image-20220517072821-2.png]]
93 93  
94 94  
95 -[[image:image-20220723100027-1.png]]
71 +== Order Info ==
96 96  
73 +Part Number: **LA66-XXX**
97 97  
98 -Open the serial port tool
75 +**XX**: The default frequency band
99 99  
100 -[[image:image-20220602161617-8.png]]
77 +* **AS923**: LoRaWAN AS923 band
78 +* **AU915**: LoRaWAN AU915 band
79 +* **EU433**: LoRaWAN EU433 band
80 +* **EU868**: LoRaWAN EU868 band
81 +* **KR920**: LoRaWAN KR920 band
82 +* **US915**: LoRaWAN US915 band
83 +* **IN865**: LoRaWAN IN865 band
84 +* **CN470**: LoRaWAN CN470 band
85 +* **PP**: Peer to Peer LoRa Protocol
101 101  
102 -[[image:image-20220602161718-9.png||height="457" width="800"]]
87 += LA66 LoRaWAN Shield =
103 103  
89 +== Overview ==
104 104  
91 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
105 105  
106 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
107 107  
108 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
94 +== Features ==
109 109  
96 +* Arduino Shield base on LA66 LoRaWAN module
97 +* Support LoRaWAN v1.0.4 protocol
98 +* Support peer-to-peer protocol
99 +* TCXO crystal to ensure RF performance on low temperature
100 +* SMA connector
101 +* Available in different frequency LoRaWAN frequency bands.
102 +* World-wide unique OTAA keys.
103 +* AT Command via UART-TTL interface
104 +* Firmware upgradable via UART interface
105 +* Ultra-long RF range
110 110  
111 -[[image:image-20220602161935-10.png||height="498" width="800"]]
107 +== Specification ==
112 112  
109 +* CPU: 32-bit 48 MHz
110 +* Flash: 256KB
111 +* RAM: 64KB
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
114 +* Frequency Range: 150 MHz ~~ 960 MHz
115 +* Maximum Power +22 dBm constant RF output
116 +* High sensitivity: -148 dBm
117 +* Temperature:
118 +** Storage: -55 ~~ +125℃
119 +** Operating: -40 ~~ +85℃
120 +* Humidity:
121 +** Storage: 5 ~~ 95% (Non-Condensing)
122 +** Operating: 10 ~~ 95% (Non-Condensing)
123 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
124 +* LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
113 113  
127 +== Pin Mapping & LED ==
114 114  
115 -(% style="color:blue" %)**3. See Uplink Command**
129 +== Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
116 116  
117 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
131 +== Example: Join TTN network and send an uplink message, get downlink message. ==
118 118  
119 -example: AT+SENDB=01,02,8,05820802581ea0a5
133 +== Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
120 120  
121 -[[image:image-20220602162157-11.png||height="497" width="800"]]
135 +== Upgrade Firmware of LA66 LoRaWAN Shield ==
122 122  
137 +=== Items needed for update ===
123 123  
139 +1. LA66 LoRaWAN Shield
140 +1. Arduino
141 +1. USB TO TTL Adapter
124 124  
125 -(% style="color:blue" %)**4. Check to see if TTN received the message**
143 +[[image:image-20220602100052-2.png||height="341" width="531"]]
126 126  
127 127  
146 +=== Connection ===
128 128  
129 -[[image:image-20220817093644-1.png]]
148 +[[image:image-20220602101311-3.png||height="350" width="760"]]
130 130  
131 131  
151 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  <-----> (% style="color:blue" %)**USB TTL(%%)
152 +GND  <-----> GND
153 +TXD  <-----> TXD
154 +RXD  <-----> RXD
132 132  
133 -== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
156 +JP6 of LA66 LoRaWAN Shield needs to be connected with yellow jumper cap
134 134  
158 +Connect to the PC after connecting the wires
135 135  
136 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
137 137  
138 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
139 139  
140 -(% style="color:red" %)**Preconditions:**
162 +[[image:image-20220602102240-4.png]]
141 141  
142 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
164 +=== Upgrade steps ===
143 143  
144 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
166 +==== Dial the SW1 of the LA66 LoRaWAN Shield to the ISP's location as shown in the figure below ====
145 145  
168 +[[image:image-20220602102824-5.png]]
146 146  
170 +==== Press the RST switch on the LA66 LoRaWAN Shield once ====
147 147  
148 -(% style="color:blue" %)**Steps for usage:**
172 +[[image:image-20220602104701-12.png]]
149 149  
150 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
174 +==== Open the upgrade application software ====
151 151  
152 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
176 +Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]
153 153  
154 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
178 +[[image:image-20220602103227-6.png]]
155 155  
180 +[[image:image-20220602103357-7.png]]
156 156  
182 +===== Select the COM port corresponding to USB TTL =====
157 157  
158 -== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
184 +[[image:image-20220602103844-8.png]]
159 159  
186 +===== Select the bin file to burn =====
160 160  
161 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
188 +[[image:image-20220602104144-9.png]]
162 162  
190 +[[image:image-20220602104251-10.png]]
163 163  
164 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
192 +[[image:image-20220602104402-11.png]]
165 165  
166 -[[image:image-20220723100439-2.png]]
194 +===== Click to start the download =====
167 167  
196 +[[image:image-20220602104923-13.png]]
168 168  
198 +===== The following figure appears to prove that the burning is in progress =====
169 169  
170 -(% style="color:blue" %)**2. Install Minicom in RPi.**
200 +[[image:image-20220602104948-14.png]]
171 171  
172 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
202 +===== The following picture appears to prove that the burning is successful =====
173 173  
174 - (% style="background-color:yellow" %)**apt update**
204 +[[image:image-20220602105251-15.png]]
175 175  
176 - (% style="background-color:yellow" %)**apt install minicom**
177 177  
207 +== Order Info ==
178 178  
179 -Use minicom to connect to the RPI's terminal
209 +Part Number: **LA66-LoRaWAN-Shield-XXX**
180 180  
181 -[[image:image-20220602153146-3.png||height="439" width="500"]]
211 +**XX**: The default frequency band
182 182  
213 +* **AS923**: LoRaWAN AS923 band
214 +* **AU915**: LoRaWAN AU915 band
215 +* **EU433**: LoRaWAN EU433 band
216 +* **EU868**: LoRaWAN EU868 band
217 +* **KR920**: LoRaWAN KR920 band
218 +* **US915**: LoRaWAN US915 band
219 +* **IN865**: LoRaWAN IN865 band
220 +* **CN470**: LoRaWAN CN470 band
221 +* **PP**: Peer to Peer LoRa Protocol
183 183  
223 +== Package Info ==
184 184  
185 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
225 +* LA66 LoRaWAN Shield x 1
226 +* RF Antenna x 1
186 186  
187 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
188 188  
189 189  
190 -[[image:image-20220602154928-5.png||height="436" width="500"]]
230 += LA66 USB LoRaWAN Adapter =
191 191  
232 +== Overview ==
192 192  
234 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
193 193  
194 -(% style="color:blue" %)**4. Send Uplink message**
195 195  
196 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
237 +== Features ==
197 197  
198 -example: AT+SENDB=01,02,8,05820802581ea0a5
239 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
240 +* Ultra-long RF range
241 +* Support LoRaWAN v1.0.4 protocol
242 +* Support peer-to-peer protocol
243 +* TCXO crystal to ensure RF performance on low temperature
244 +* Spring RF antenna
245 +* Available in different frequency LoRaWAN frequency bands.
246 +* World-wide unique OTAA keys.
247 +* AT Command via UART-TTL interface
248 +* Firmware upgradable via UART interface
199 199  
200 200  
201 -[[image:image-20220602160339-6.png||height="517" width="600"]]
251 +== Specification ==
202 202  
253 +* CPU: 32-bit 48 MHz
254 +* Flash: 256KB
255 +* RAM: 64KB
256 +* Input Power Range: 5v
257 +* Frequency Range: 150 MHz ~~ 960 MHz
258 +* Maximum Power +22 dBm constant RF output
259 +* High sensitivity: -148 dBm
260 +* Temperature:
261 +** Storage: -55 ~~ +125℃
262 +** Operating: -40 ~~ +85℃
263 +* Humidity:
264 +** Storage: 5 ~~ 95% (Non-Condensing)
265 +** Operating: 10 ~~ 95% (Non-Condensing)
266 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
267 +* LoRa Rx current: <9 mA
203 203  
204 204  
205 -Check to see if TTN received the message
270 +== Pin Mapping & LED ==
206 206  
207 -[[image:image-20220602160627-7.png||height="369" width="800"]]
272 +== Example Send & Get Messages via LoRaWAN in PC ==
208 208  
274 +Connect the LA66 LoRa Shield to the PC
209 209  
276 +[[image:image-20220602171217-1.png||height="615" width="915"]]
210 210  
211 -== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
278 +Open the serial port tool
212 212  
280 +[[image:image-20220602161617-8.png]]
213 213  
214 -=== 1.8.1  Hardware and Software Connection ===
282 +[[image:image-20220602161718-9.png||height="529" width="927"]]
215 215  
284 +Press the reset switch RST on the LA66 LoRa Shield.
216 216  
286 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
217 217  
218 -==== (% style="color:blue" %)**Overview：**(%%) ====
288 +[[image:image-20220602161935-10.png]]
219 219  
290 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
220 220  
221 -(((
222 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
292 +example: AT+SENDB=01,02,8,05820802581ea0a5
223 223  
224 -* Send real-time location information of mobile phone to LoRaWAN network.
225 -* Check LoRaWAN network signal strengh.
226 -* Manually send messages to LoRaWAN network.
227 -)))
294 +[[image:image-20220602162157-11.png]]
228 228  
296 +Check to see if TTN received the message
229 229  
298 +[[image:image-20220602162331-12.png||height="547" width="1044"]]
230 230  
300 +== Example Send & Get Messages via LoRaWAN in RPi ==
231 231  
232 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
302 +Connect the LA66 LoRa Shield to the RPI
233 233  
234 -A USB to Type-C adapter is needed to connect to a Mobile phone.
304 +[[image:image-20220602171233-2.png||height="592" width="881"]]
235 235  
236 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
306 +Log in to the RPI's terminal and connect to the serial port
237 237  
238 -[[image:image-20220813174353-2.png||height="360" width="313"]]
308 +[[image:image-20220602153146-3.png]]
239 239  
310 +Press the reset switch RST on the LA66 LoRa Shield.
311 +The following picture appears to prove that the LA66 LoRa Shield successfully entered the network
240 240  
313 +[[image:image-20220602154928-5.png]]
241 241  
242 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
315 +send instructions: AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
243 243  
244 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
317 +example: AT+SENDB=01,02,8,05820802581ea0a5
245 245  
246 -[[image:image-20220813173738-1.png]]
319 +[[image:image-20220602160339-6.png]]
247 247  
321 +Check to see if TTN received the message
248 248  
323 +[[image:image-20220602160627-7.png||height="468" width="1013"]]
249 249  
250 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
325 +=== Install Minicom ===
251 251  
252 -Function and page introduction
327 +Enter the following command in the RPI terminal
253 253  
254 -[[image:image-20220723113448-7.png||height="995" width="450"]]
329 +apt update
255 255  
256 -**Block Explain:**
331 +[[image:image-20220602143155-1.png]]
257 257  
258 -1.  Display LA66 USB LoRaWAN Module connection status
333 +apt install minicom
259 259  
260 -2.  Check and reconnect
335 +[[image:image-20220602143744-2.png]]
261 261  
262 -3.  Turn send timestamps on or off
337 +=== Send PC's CPU/RAM usage to TTN via script. ===
263 263  
264 -4.  Display LoRaWan connection status
339 +==== Take python as an example： ====
265 265  
266 -5.  Check LoRaWan connection status
341 +===== Preconditions: =====
267 267  
268 -6.  The RSSI value of the node when the ACK is received
343 +1.LA66 USB LoRaWAN Adapter works fine
269 269  
270 -7.  Node's Signal Strength Icon
345 +2.LA66 USB LoRaWAN Adapter  is registered with TTN
271 271  
272 -8.  Configure Location Uplink Interval
347 +===== Steps for usage =====
273 273  
274 -9.  AT command input box
349 +1.Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
275 275  
276 -10.  Send Button:  Send input box info to LA66 USB Adapter
351 +2.Run the script and see the TTN
277 277  
278 -11.  Output Log from LA66 USB adapter
353 +[[image:image-20220602115852-3.png]]
279 279  
280 -12.  clear log button
281 281  
282 -13.  exit button
283 283  
357 +== Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
284 284  
285 -LA66 USB LoRaWAN Module not connected
286 286  
287 -[[image:image-20220723110520-5.png||height="677" width="508"]]
360 +== Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
288 288  
289 289  
290 290  
291 -Connect LA66 USB LoRaWAN Module
364 +== Order Info ==
292 292  
293 -[[image:image-20220723110626-6.png||height="681" width="511"]]
366 +Part Number: **LA66-USB-LoRaWAN-Adapter-XXX**
294 294  
368 +**XX**: The default frequency band
295 295  
370 +* **AS923**: LoRaWAN AS923 band
371 +* **AU915**: LoRaWAN AU915 band
372 +* **EU433**: LoRaWAN EU433 band
373 +* **EU868**: LoRaWAN EU868 band
374 +* **KR920**: LoRaWAN KR920 band
375 +* **US915**: LoRaWAN US915 band
376 +* **IN865**: LoRaWAN IN865 band
377 +* **CN470**: LoRaWAN CN470 band
378 +* **PP**: Peer to Peer LoRa Protocol
296 296  
297 -=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
380 +== Package Info ==
298 298  
382 +* LA66 USB LoRaWAN Adapter x 1
299 299  
300 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
301 -
302 -[[image:image-20220723134549-8.png]]
303 -
304 -
305 -
306 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
307 -
308 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
309 -
310 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
311 -
312 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
313 -
314 -
315 -Example output in NodeRed is as below:
316 -
317 -[[image:image-20220723144339-1.png]]
318 -
319 -
320 -
321 -== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
322 -
323 -
324 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
325 -
326 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
327 -
328 -[[image:image-20220723150132-2.png]]
329 -
330 -
331 -
332 -= 2.  FAQ =
333 -
334 -
335 -== 2.1  How to Compile Source Code for LA66? ==
336 -
337 -
338 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
339 -
340 -
341 -
342 -= 3.  Order Info =
343 -
344 -
345 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
346 -
347 -
348 -(% style="color:blue" %)**XXX**(%%): The default frequency band
349 -
350 -* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
351 -* (% style="color:red" %)**AU915**(%%):  LoRaWAN AU915 band
352 -* (% style="color:red" %)**EU433**(%%):  LoRaWAN EU433 band
353 -* (% style="color:red" %)**EU868**(%%):  LoRaWAN EU868 band
354 -* (% style="color:red" %)**KR920**(%%):  LoRaWAN KR920 band
355 -* (% style="color:red" %)**US915**(%%):  LoRaWAN US915 band
356 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
357 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
358 -* (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
359 -
360 -
361 -
362 -
363 -
364 -= 4.  Reference =
365 -
366 -
367 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
384 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content