Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 149.2
edited by Xiaoling
on 2022/08/17 09:37
Change comment: There is no comment for this version
To version 87.16
edited by Xiaoling
on 2022/07/13 10:10
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -6,23 +6,18 @@
6 6  
7 7  
8 8  
9 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
12 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
15 -
16 -
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 20  (((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
16 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
22 22  )))
23 23  
24 24  (((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
20 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 26  )))
27 27  
28 28  (((
... ... @@ -38,31 +38,96 @@
38 38  )))
39 39  
40 40  
41 -
42 42  == 1.2  Features ==
43 43  
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
41 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
46 +* Ultra-long RF range
56 56  
57 57  
58 58  
59 59  == 1.3  Specification ==
60 60  
52 +* CPU: 32-bit 48 MHz
53 +* Flash: 256KB
54 +* RAM: 64KB
55 +* Input Power Range: 1.8v ~~ 3.7v
56 +* Power Consumption: < 4uA.
57 +* Frequency Range: 150 MHz ~~ 960 MHz
58 +* Maximum Power +22 dBm constant RF output
59 +* High sensitivity: -148 dBm
60 +* Temperature:
61 +** Storage: -55 ~~ +125℃
62 +** Operating: -40 ~~ +85℃
63 +* Humidity:
64 +** Storage: 5 ~~ 95% (Non-Condensing)
65 +** Operating: 10 ~~ 95% (Non-Condensing)
66 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
67 +* LoRa Rx current: <9 mA
68 +* I/O Voltage: 3.3v
61 61  
70 +
71 +
72 +== 1.4  AT Command ==
73 +
74 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
75 +
76 +
77 +== 1.5  Dimension ==
78 +
79 +[[image:image-20220517072526-1.png]]
80 +
81 +
82 +
83 +== 1.6  Pin Mapping ==
84 +
85 +
86 +[[image:image-20220523101537-1.png]]
87 +
88 +
89 +
90 +== 1.7  Land Pattern ==
91 +
92 +[[image:image-20220517072821-2.png]]
93 +
94 +
95 +
96 += 2.  LA66 LoRaWAN Shield =
97 +
98 +
99 +== 2.1  Overview ==
100 +
101 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
102 +
103 +
104 +== 2.2  Features ==
105 +
106 +* Arduino Shield base on LA66 LoRaWAN module
107 +* Support LoRaWAN v1.0.4 protocol
108 +* Support peer-to-peer protocol
109 +* TCXO crystal to ensure RF performance on low temperature
110 +* SMA connector
111 +* Available in different frequency LoRaWAN frequency bands.
112 +* World-wide unique OTAA keys.
113 +* AT Command via UART-TTL interface
114 +* Firmware upgradable via UART interface
115 +* Ultra-long RF range
116 +
117 +
118 +
119 +== 2.3  Specification ==
120 +
62 62  * CPU: 32-bit 48 MHz
63 63  * Flash: 256KB
64 64  * RAM: 64KB
65 -* Input Power Range: 5v
124 +* Input Power Range: 1.8v ~~ 3.7v
125 +* Power Consumption: < 4uA.
66 66  * Frequency Range: 150 MHz ~~ 960 MHz
67 67  * Maximum Power +22 dBm constant RF output
68 68  * High sensitivity: -148 dBm
... ... @@ -74,277 +74,320 @@
74 74  ** Operating: 10 ~~ 95% (Non-Condensing)
75 75  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
76 76  * LoRa Rx current: <9 mA
137 +* I/O Voltage: 3.3v
77 77  
78 78  
79 79  
80 -== 1.4  Pin Mapping & LED ==
141 +== 2.4  Pin Mapping & LED ==
81 81  
82 -[[image:image-20220813183239-3.png||height="526" width="662"]]
83 83  
84 84  
145 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
85 85  
86 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
87 87  
88 88  
149 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
150 +
151 +
152 +
153 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
154 +
155 +
156 +
157 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
158 +
159 +
160 +=== 2.8.1  Items needed for update ===
161 +
162 +1. LA66 LoRaWAN Shield
163 +1. Arduino
164 +1. USB TO TTL Adapter
165 +
166 +
167 +
168 +
169 +[[image:image-20220602100052-2.png||height="385" width="600"]]
170 +
171 +
172 +=== 2.8.2  Connection ===
173 +
174 +
175 +[[image:image-20220602101311-3.png||height="276" width="600"]]
176 +
177 +
178 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
179 +
89 89  (((
90 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
181 +(% style="background-color:yellow" %)**GND  <-> GND
182 +TXD  <->  TXD
183 +RXD  <->  RXD**
91 91  )))
92 92  
93 93  
94 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
187 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
95 95  
189 +Connect USB TTL Adapter to PC after connecting the wires
96 96  
97 -[[image:image-20220723100027-1.png]]
98 98  
192 +[[image:image-20220602102240-4.png||height="304" width="600"]]
99 99  
100 -Open the serial port tool
101 101  
102 -[[image:image-20220602161617-8.png]]
195 +=== 2.8.3  Upgrade steps ===
103 103  
104 -[[image:image-20220602161718-9.png||height="457" width="800"]]
105 105  
198 +==== 1.  Switch SW1 to put in ISP position ====
106 106  
107 107  
108 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
201 +[[image:image-20220602102824-5.png||height="306" width="600"]]
109 109  
110 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
111 111  
112 112  
113 -[[image:image-20220602161935-10.png||height="498" width="800"]]
205 +==== 2.  Press the RST switch once ====
114 114  
115 115  
208 +[[image:image-20220602104701-12.png||height="285" width="600"]]
116 116  
117 -(% style="color:blue" %)**3. See Uplink Command**
118 118  
119 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
120 120  
121 -example: AT+SENDB=01,02,8,05820802581ea0a5
212 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
122 122  
123 -[[image:image-20220602162157-11.png||height="497" width="800"]]
124 124  
215 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
125 125  
126 126  
127 -(% style="color:blue" %)**4. Check to see if TTN received the message**
218 +[[image:image-20220602103227-6.png]]
128 128  
129 129  
221 +[[image:image-20220602103357-7.png]]
130 130  
131 -[[image:image-20220817093644-1.png]]
132 132  
133 133  
225 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
226 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
134 134  
135 -== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
136 136  
229 +[[image:image-20220602103844-8.png]]
137 137  
138 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
139 139  
140 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
141 141  
142 -(% style="color:red" %)**Preconditions:**
233 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
234 +(% style="color:blue" %)**3. Select the bin file to burn**
143 143  
144 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
145 145  
146 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
237 +[[image:image-20220602104144-9.png]]
147 147  
148 148  
240 +[[image:image-20220602104251-10.png]]
149 149  
150 -(% style="color:blue" %)**Steps for usage:**
151 151  
152 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
243 +[[image:image-20220602104402-11.png]]
153 153  
154 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
155 155  
156 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
157 157  
247 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
248 +(% style="color:blue" %)**4. Click to start the download**
158 158  
250 +[[image:image-20220602104923-13.png]]
159 159  
160 -== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
161 161  
162 162  
163 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
254 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
255 +(% style="color:blue" %)**5. Check update process**
164 164  
165 165  
166 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
258 +[[image:image-20220602104948-14.png]]
167 167  
168 -[[image:image-20220723100439-2.png]]
169 169  
170 170  
262 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
263 +(% style="color:blue" %)**The following picture shows that the burning is successful**
171 171  
172 -(% style="color:blue" %)**2. Install Minicom in RPi.**
265 +[[image:image-20220602105251-15.png]]
173 173  
174 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
175 175  
176 - (% style="background-color:yellow" %)**apt update**
177 177  
178 - (% style="background-color:yellow" %)**apt install minicom**
269 += 3.  LA66 USB LoRaWAN Adapter =
179 179  
180 180  
181 -Use minicom to connect to the RPI's terminal
272 +== 3.1  Overview ==
182 182  
183 -[[image:image-20220602153146-3.png||height="439" width="500"]]
274 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
184 184  
185 185  
277 +== 3.2  Features ==
186 186  
187 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
279 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
280 +* Ultra-long RF range
281 +* Support LoRaWAN v1.0.4 protocol
282 +* Support peer-to-peer protocol
283 +* TCXO crystal to ensure RF performance on low temperature
284 +* Spring RF antenna
285 +* Available in different frequency LoRaWAN frequency bands.
286 +* World-wide unique OTAA keys.
287 +* AT Command via UART-TTL interface
288 +* Firmware upgradable via UART interface
188 188  
189 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
190 190  
191 191  
192 -[[image:image-20220602154928-5.png||height="436" width="500"]]
292 +== 3.3  Specification ==
193 193  
294 +* CPU: 32-bit 48 MHz
295 +* Flash: 256KB
296 +* RAM: 64KB
297 +* Input Power Range: 5v
298 +* Frequency Range: 150 MHz ~~ 960 MHz
299 +* Maximum Power +22 dBm constant RF output
300 +* High sensitivity: -148 dBm
301 +* Temperature:
302 +** Storage: -55 ~~ +125℃
303 +** Operating: -40 ~~ +85℃
304 +* Humidity:
305 +** Storage: 5 ~~ 95% (Non-Condensing)
306 +** Operating: 10 ~~ 95% (Non-Condensing)
307 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
308 +* LoRa Rx current: <9 mA
194 194  
195 195  
196 -(% style="color:blue" %)**4. Send Uplink message**
197 197  
198 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
312 +== 3.4  Pin Mapping & LED ==
199 199  
200 -example: AT+SENDB=01,02,8,05820802581ea0a5
201 201  
202 202  
203 -[[image:image-20220602160339-6.png||height="517" width="600"]]
316 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
204 204  
205 205  
319 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
206 206  
207 -Check to see if TTN received the message
208 208  
209 -[[image:image-20220602160627-7.png||height="369" width="800"]]
322 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
210 210  
211 211  
325 +[[image:image-20220602171217-1.png||height="538" width="800"]]
212 212  
213 -== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
214 214  
328 +Open the serial port tool
215 215  
216 -=== 1.8.1  Hardware and Software Connection ===
330 +[[image:image-20220602161617-8.png]]
217 217  
332 +[[image:image-20220602161718-9.png||height="457" width="800"]]
218 218  
219 219  
220 -==== (% style="color:blue" %)**Overview：**(%%) ====
221 221  
336 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
222 222  
223 -(((
224 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
338 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
225 225  
226 -* Send real-time location information of mobile phone to LoRaWAN network.
227 -* Check LoRaWAN network signal strengh.
228 -* Manually send messages to LoRaWAN network.
229 -)))
230 230  
341 +[[image:image-20220602161935-10.png||height="498" width="800"]]
231 231  
232 232  
233 233  
234 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
345 +(% style="color:blue" %)**3. See Uplink Command**
235 235  
236 -A USB to Type-C adapter is needed to connect to a Mobile phone.
347 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
237 237  
238 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
349 +example: AT+SENDB=01,02,8,05820802581ea0a5
239 239  
240 -[[image:image-20220813174353-2.png||height="360" width="313"]]
351 +[[image:image-20220602162157-11.png||height="497" width="800"]]
241 241  
242 242  
243 243  
244 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
355 +(% style="color:blue" %)**4. Check to see if TTN received the message**
245 245  
246 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
357 +[[image:image-20220602162331-12.png||height="420" width="800"]]
247 247  
248 -[[image:image-20220813173738-1.png]]
249 249  
250 250  
361 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
251 251  
252 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
253 253  
254 -Function and page introduction
364 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
255 255  
256 -[[image:image-20220723113448-7.png||height="995" width="450"]]
257 257  
258 -**Block Explain:**
367 +(% style="color:red" %)**Preconditions:**
259 259  
260 -1.  Display LA66 USB LoRaWAN Module connection status
369 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
261 261  
262 -2.  Check and reconnect
371 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
263 263  
264 -3.  Turn send timestamps on or off
265 265  
266 -4.  Display LoRaWan connection status
267 267  
268 -5.  Check LoRaWan connection status
375 +(% style="color:blue" %)**Steps for usage:**
269 269  
270 -6.  The RSSI value of the node when the ACK is received
377 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
271 271  
272 -7.  Node's Signal Strength Icon
379 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
273 273  
274 -8.  Configure Location Uplink Interval
381 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
275 275  
276 -9.  AT command input box
277 277  
278 -10.  Send Button:  Send input box info to LA66 USB Adapter
279 279  
280 -11.  Output Log from LA66 USB adapter
385 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
281 281  
282 -12.  clear log button
283 283  
284 -13.  exit button
388 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
285 285  
286 286  
287 -LA66 USB LoRaWAN Module not connected
391 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
288 288  
289 -[[image:image-20220723110520-5.png||height="677" width="508"]]
393 +[[image:image-20220602171233-2.png||height="538" width="800"]]
290 290  
291 291  
292 292  
293 -Connect LA66 USB LoRaWAN Module
397 +(% style="color:blue" %)**2. Install Minicom in RPi.**
294 294  
295 -[[image:image-20220723110626-6.png||height="681" width="511"]]
399 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
296 296  
401 + (% style="background-color:yellow" %)**apt update**
297 297  
403 + (% style="background-color:yellow" %)**apt install minicom**
298 298  
299 -=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
300 300  
406 +Use minicom to connect to the RPI's terminal
301 301  
302 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
408 +[[image:image-20220602153146-3.png||height="439" width="500"]]
303 303  
304 -[[image:image-20220723134549-8.png]]
305 305  
306 306  
412 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
307 307  
308 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
414 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
309 309  
310 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
311 311  
312 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
417 +[[image:image-20220602154928-5.png||height="436" width="500"]]
313 313  
314 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
315 315  
316 316  
317 -Example output in NodeRed is as below:
421 +(% style="color:blue" %)**4. Send Uplink message**
318 318  
319 -[[image:image-20220723144339-1.png]]
423 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
320 320  
425 +example: AT+SENDB=01,02,8,05820802581ea0a5
321 321  
322 322  
323 -== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
428 +[[image:image-20220602160339-6.png||height="517" width="600"]]
324 324  
325 325  
326 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
327 327  
328 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
432 +Check to see if TTN received the message
329 329  
330 -[[image:image-20220723150132-2.png]]
434 +[[image:image-20220602160627-7.png||height="369" width="800"]]
331 331  
332 332  
333 333  
334 -= 2.  FAQ =
438 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
335 335  
336 336  
337 -== 2.1  How to Compile Source Code for LA66? ==
338 338  
442 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
339 339  
340 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
341 341  
342 342  
343 343  
344 -= 3.  Order Info =
447 += 4.  Order Info =
345 345  
346 346  
347 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
450 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
348 348  
349 349  
350 350  (% style="color:blue" %)**XXX**(%%): The default frequency band
... ... @@ -360,7 +360,9 @@
360 360  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
361 361  
362 362  
363 -= 4.  Reference =
364 364  
467 += 5.  Reference =
365 365  
366 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
469 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
470 +
471 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.0 KB
Content