Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 148.3
edited by Xiaoling
on 2022/08/17 09:27
Change comment: There is no comment for this version
To version 87.10
edited by Xiaoling
on 2022/07/13 10:03
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -1,69 +1,116 @@
1 1  
2 2  
3 -**Table of Contents:**
4 -
5 5  {{toc/}}
6 6  
7 7  
8 8  
7 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
10 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
13 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
15 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 16  
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 -(((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 -)))
27 -
28 -(((
29 29  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 -)))
31 31  
32 -(((
33 33  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 -)))
35 35  
36 -(((
37 37  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 -)))
39 39  
40 40  
41 -
42 42  == 1.2  Features ==
43 43  
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
29 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
34 +* Ultra-long RF range
56 56  
57 57  
58 58  
59 -
60 60  == 1.3  Specification ==
61 61  
40 +* CPU: 32-bit 48 MHz
41 +* Flash: 256KB
42 +* RAM: 64KB
43 +* Input Power Range: 1.8v ~~ 3.7v
44 +* Power Consumption: < 4uA.
45 +* Frequency Range: 150 MHz ~~ 960 MHz
46 +* Maximum Power +22 dBm constant RF output
47 +* High sensitivity: -148 dBm
48 +* Temperature:
49 +** Storage: -55 ~~ +125℃
50 +** Operating: -40 ~~ +85℃
51 +* Humidity:
52 +** Storage: 5 ~~ 95% (Non-Condensing)
53 +** Operating: 10 ~~ 95% (Non-Condensing)
54 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
55 +* LoRa Rx current: <9 mA
56 +* I/O Voltage: 3.3v
62 62  
58 +
59 +
60 +== 1.4  AT Command ==
61 +
62 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
63 +
64 +
65 +== 1.5  Dimension ==
66 +
67 +[[image:image-20220517072526-1.png]]
68 +
69 +
70 +
71 +== 1.6  Pin Mapping ==
72 +
73 +
74 +[[image:image-20220523101537-1.png]]
75 +
76 +
77 +
78 +== 1.7  Land Pattern ==
79 +
80 +[[image:image-20220517072821-2.png]]
81 +
82 +
83 +
84 += 2.  LA66 LoRaWAN Shield =
85 +
86 +
87 +== 2.1  Overview ==
88 +
89 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
90 +
91 +
92 +== 2.2  Features ==
93 +
94 +* Arduino Shield base on LA66 LoRaWAN module
95 +* Support LoRaWAN v1.0.4 protocol
96 +* Support peer-to-peer protocol
97 +* TCXO crystal to ensure RF performance on low temperature
98 +* SMA connector
99 +* Available in different frequency LoRaWAN frequency bands.
100 +* World-wide unique OTAA keys.
101 +* AT Command via UART-TTL interface
102 +* Firmware upgradable via UART interface
103 +* Ultra-long RF range
104 +
105 +
106 +
107 +== 2.3  Specification ==
108 +
63 63  * CPU: 32-bit 48 MHz
64 64  * Flash: 256KB
65 65  * RAM: 64KB
66 -* Input Power Range: 5v
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
67 67  * Frequency Range: 150 MHz ~~ 960 MHz
68 68  * Maximum Power +22 dBm constant RF output
69 69  * High sensitivity: -148 dBm
... ... @@ -75,278 +75,315 @@
75 75  ** Operating: 10 ~~ 95% (Non-Condensing)
76 76  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
77 77  * LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
78 78  
79 79  
80 80  
129 +== 2.4  Pin Mapping & LED ==
81 81  
82 -== 1.4  Pin Mapping & LED ==
83 83  
84 -[[image:image-20220813183239-3.png||height="526" width="662"]]
85 85  
133 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
86 86  
87 87  
88 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
89 89  
137 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
90 90  
91 -(((
92 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
93 -)))
94 94  
95 95  
96 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
141 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
97 97  
98 98  
99 -[[image:image-20220723100027-1.png]]
100 100  
145 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
101 101  
102 -Open the serial port tool
103 103  
104 -[[image:image-20220602161617-8.png]]
148 +=== 2.8.1  Items needed for update ===
105 105  
106 -[[image:image-20220602161718-9.png||height="457" width="800"]]
150 +1. LA66 LoRaWAN Shield
151 +1. Arduino
152 +1. USB TO TTL Adapter
107 107  
154 +[[image:image-20220602100052-2.png||height="385" width="600"]]
108 108  
109 109  
110 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
157 +=== 2.8.2  Connection ===
111 111  
112 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
113 113  
160 +[[image:image-20220602101311-3.png||height="276" width="600"]]
114 114  
115 -[[image:image-20220602161935-10.png||height="498" width="800"]]
116 116  
163 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
117 117  
165 +(% style="background-color:yellow" %)**GND  <-> GND
166 +TXD  <->  TXD
167 +RXD  <->  RXD**
118 118  
119 -(% style="color:blue" %)**3. See Uplink Command**
120 120  
121 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
170 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
122 122  
123 -example: AT+SENDB=01,02,8,05820802581ea0a5
172 +Connect USB TTL Adapter to PC after connecting the wires
124 124  
125 -[[image:image-20220602162157-11.png||height="497" width="800"]]
126 126  
175 +[[image:image-20220602102240-4.png||height="304" width="600"]]
127 127  
128 128  
129 -(% style="color:blue" %)**4. Check to see if TTN received the message**
178 +=== 2.8.3  Upgrade steps ===
130 130  
131 -[[image:image-20220817084532-1.jpeg||height="563" width="1076"]]
132 132  
181 +==== 1.  Switch SW1 to put in ISP position ====
133 133  
134 134  
135 -== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
184 +[[image:image-20220602102824-5.png||height="306" width="600"]]
136 136  
137 137  
138 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
139 139  
140 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
188 +==== 2.  Press the RST switch once ====
141 141  
142 -(% style="color:red" %)**Preconditions:**
143 143  
144 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
191 +[[image:image-20220602104701-12.png||height="285" width="600"]]
145 145  
146 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
147 147  
148 148  
195 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
149 149  
150 -(% style="color:blue" %)**Steps for usage:**
151 151  
152 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
198 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
153 153  
154 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
155 155  
156 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
201 +[[image:image-20220602103227-6.png]]
157 157  
158 158  
204 +[[image:image-20220602103357-7.png]]
159 159  
160 -== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
161 161  
162 162  
163 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
208 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
209 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
164 164  
165 165  
166 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
212 +[[image:image-20220602103844-8.png]]
167 167  
168 -[[image:image-20220723100439-2.png]]
169 169  
170 170  
216 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
217 +(% style="color:blue" %)**3. Select the bin file to burn**
171 171  
172 -(% style="color:blue" %)**2. Install Minicom in RPi.**
173 173  
174 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
220 +[[image:image-20220602104144-9.png]]
175 175  
176 - (% style="background-color:yellow" %)**apt update**
177 177  
178 - (% style="background-color:yellow" %)**apt install minicom**
223 +[[image:image-20220602104251-10.png]]
179 179  
180 180  
181 -Use minicom to connect to the RPI's terminal
226 +[[image:image-20220602104402-11.png]]
182 182  
183 -[[image:image-20220602153146-3.png||height="439" width="500"]]
184 184  
185 185  
230 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
231 +(% style="color:blue" %)**4. Click to start the download**
186 186  
187 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
233 +[[image:image-20220602104923-13.png]]
188 188  
189 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
190 190  
191 191  
192 -[[image:image-20220602154928-5.png||height="436" width="500"]]
237 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
238 +(% style="color:blue" %)**5. Check update process**
193 193  
194 194  
241 +[[image:image-20220602104948-14.png]]
195 195  
196 -(% style="color:blue" %)**4. Send Uplink message**
197 197  
198 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
199 199  
200 -example: AT+SENDB=01,02,8,05820802581ea0a5
245 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
246 +(% style="color:blue" %)**The following picture shows that the burning is successful**
201 201  
248 +[[image:image-20220602105251-15.png]]
202 202  
203 -[[image:image-20220602160339-6.png||height="517" width="600"]]
204 204  
205 205  
252 += 3.  LA66 USB LoRaWAN Adapter =
206 206  
207 -Check to see if TTN received the message
208 208  
209 -[[image:image-20220602160627-7.png||height="369" width="800"]]
255 +== 3.1  Overview ==
210 210  
257 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
211 211  
212 212  
213 -== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
260 +== 3.2  Features ==
214 214  
262 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
263 +* Ultra-long RF range
264 +* Support LoRaWAN v1.0.4 protocol
265 +* Support peer-to-peer protocol
266 +* TCXO crystal to ensure RF performance on low temperature
267 +* Spring RF antenna
268 +* Available in different frequency LoRaWAN frequency bands.
269 +* World-wide unique OTAA keys.
270 +* AT Command via UART-TTL interface
271 +* Firmware upgradable via UART interface
215 215  
216 -=== 1.8.1  Hardware and Software Connection ===
217 217  
218 218  
275 +== 3.3  Specification ==
219 219  
220 -==== (% style="color:blue" %)**Overview：**(%%) ====
277 +* CPU: 32-bit 48 MHz
278 +* Flash: 256KB
279 +* RAM: 64KB
280 +* Input Power Range: 5v
281 +* Frequency Range: 150 MHz ~~ 960 MHz
282 +* Maximum Power +22 dBm constant RF output
283 +* High sensitivity: -148 dBm
284 +* Temperature:
285 +** Storage: -55 ~~ +125℃
286 +** Operating: -40 ~~ +85℃
287 +* Humidity:
288 +** Storage: 5 ~~ 95% (Non-Condensing)
289 +** Operating: 10 ~~ 95% (Non-Condensing)
290 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
291 +* LoRa Rx current: <9 mA
221 221  
222 222  
223 -(((
224 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
225 225  
226 -* Send real-time location information of mobile phone to LoRaWAN network.
227 -* Check LoRaWAN network signal strengh.
228 -* Manually send messages to LoRaWAN network.
229 -)))
295 +== 3.4  Pin Mapping & LED ==
230 230  
231 231  
232 232  
299 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
233 233  
234 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
235 235  
236 -A USB to Type-C adapter is needed to connect to a Mobile phone.
302 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
237 237  
238 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
239 239  
240 -[[image:image-20220813174353-2.png||height="360" width="313"]]
305 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
241 241  
242 242  
308 +[[image:image-20220602171217-1.png||height="538" width="800"]]
243 243  
244 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
245 245  
246 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
311 +Open the serial port tool
247 247  
248 -[[image:image-20220813173738-1.png]]
313 +[[image:image-20220602161617-8.png]]
249 249  
315 +[[image:image-20220602161718-9.png||height="457" width="800"]]
250 250  
251 251  
252 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
253 253  
254 -Function and page introduction
319 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
255 255  
256 -[[image:image-20220723113448-7.png||height="995" width="450"]]
321 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
257 257  
258 -**Block Explain:**
259 259  
260 -1.  Display LA66 USB LoRaWAN Module connection status
324 +[[image:image-20220602161935-10.png||height="498" width="800"]]
261 261  
262 -2.  Check and reconnect
263 263  
264 -3.  Turn send timestamps on or off
265 265  
266 -4.  Display LoRaWan connection status
328 +(% style="color:blue" %)**3. See Uplink Command**
267 267  
268 -5.  Check LoRaWan connection status
330 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
269 269  
270 -6.  The RSSI value of the node when the ACK is received
332 +example: AT+SENDB=01,02,8,05820802581ea0a5
271 271  
272 -7.  Node's Signal Strength Icon
334 +[[image:image-20220602162157-11.png||height="497" width="800"]]
273 273  
274 -8.  Configure Location Uplink Interval
275 275  
276 -9.  AT command input box
277 277  
278 -10.  Send Button:  Send input box info to LA66 USB Adapter
338 +(% style="color:blue" %)**4. Check to see if TTN received the message**
279 279  
280 -11.  Output Log from LA66 USB adapter
340 +[[image:image-20220602162331-12.png||height="420" width="800"]]
281 281  
282 -12.  clear log button
283 283  
284 -13.  exit button
285 285  
344 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
286 286  
287 -LA66 USB LoRaWAN Module not connected
288 288  
289 -[[image:image-20220723110520-5.png||height="677" width="508"]]
347 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
290 290  
291 291  
350 +(% style="color:red" %)**Preconditions:**
292 292  
293 -Connect LA66 USB LoRaWAN Module
352 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
294 294  
295 -[[image:image-20220723110626-6.png||height="681" width="511"]]
354 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
296 296  
297 297  
298 298  
299 -=== 1.8.2  Send data to TTNv3 and plot location info in Node-Red ===
358 +(% style="color:blue" %)**Steps for usage:**
300 300  
360 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
301 301  
302 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
362 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
303 303  
304 -[[image:image-20220723134549-8.png]]
364 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
305 305  
306 306  
307 307  
308 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
368 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
309 309  
310 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
311 311  
312 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
371 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
313 313  
314 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
315 315  
374 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
316 316  
317 -Example output in NodeRed is as below:
376 +[[image:image-20220602171233-2.png||height="538" width="800"]]
318 318  
319 -[[image:image-20220723144339-1.png]]
320 320  
321 321  
380 +(% style="color:blue" %)**2. Install Minicom in RPi.**
322 322  
323 -== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
382 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
324 324  
384 + (% style="background-color:yellow" %)**apt update**
325 325  
326 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
386 + (% style="background-color:yellow" %)**apt install minicom**
327 327  
328 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
329 329  
330 -[[image:image-20220723150132-2.png]]
389 +Use minicom to connect to the RPI's terminal
331 331  
391 +[[image:image-20220602153146-3.png||height="439" width="500"]]
332 332  
333 333  
334 -= 2.  FAQ =
335 335  
395 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
396 +(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
336 336  
337 -== 2.1  How to Compile Source Code for LA66? ==
398 +[[image:image-20220602154928-5.png||height="436" width="500"]]
338 338  
339 339  
340 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
341 341  
402 +(% style="color:blue" %)**4. Send Uplink message**
342 342  
404 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
343 343  
344 -= 3.  Order Info =
406 +example: AT+SENDB=01,02,8,05820802581ea0a5
345 345  
346 346  
347 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
409 +[[image:image-20220602160339-6.png||height="517" width="600"]]
348 348  
349 349  
412 +
413 +Check to see if TTN received the message
414 +
415 +[[image:image-20220602160627-7.png||height="369" width="800"]]
416 +
417 +
418 +
419 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
420 +
421 +
422 +
423 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
424 +
425 +
426 +
427 +
428 += 4.  Order Info =
429 +
430 +
431 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
432 +
433 +
350 350  (% style="color:blue" %)**XXX**(%%): The default frequency band
351 351  
352 352  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -361,7 +361,9 @@
361 361  
362 362  
363 363  
364 -= 4.  Reference =
365 365  
449 += 5.  Reference =
366 366  
367 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
451 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
452 +
453 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content