Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 148.2
edited by Xiaoling
on 2022/08/17 08:46
Change comment: There is no comment for this version
To version 87.11
edited by Xiaoling
on 2022/07/13 10:04
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -1,68 +1,113 @@
1 1  
2 2  
3 -**Table of Contents:**
4 -
5 5  {{toc/}}
6 6  
7 7  
8 8  
7 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
10 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
13 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
15 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 16  
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 -(((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 -)))
27 -
28 -(((
29 29  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 -)))
31 31  
32 -(((
33 33  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 -)))
35 35  
36 -(((
37 37  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 -)))
39 39  
40 40  
41 -
42 42  == 1.2  Features ==
43 43  
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
29 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
34 +* Ultra-long RF range
56 56  
57 57  
58 -
59 59  == 1.3  Specification ==
60 60  
39 +* CPU: 32-bit 48 MHz
40 +* Flash: 256KB
41 +* RAM: 64KB
42 +* Input Power Range: 1.8v ~~ 3.7v
43 +* Power Consumption: < 4uA.
44 +* Frequency Range: 150 MHz ~~ 960 MHz
45 +* Maximum Power +22 dBm constant RF output
46 +* High sensitivity: -148 dBm
47 +* Temperature:
48 +** Storage: -55 ~~ +125℃
49 +** Operating: -40 ~~ +85℃
50 +* Humidity:
51 +** Storage: 5 ~~ 95% (Non-Condensing)
52 +** Operating: 10 ~~ 95% (Non-Condensing)
53 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
54 +* LoRa Rx current: <9 mA
55 +* I/O Voltage: 3.3v
61 61  
57 +
58 +== 1.4  AT Command ==
59 +
60 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
61 +
62 +
63 +== 1.5  Dimension ==
64 +
65 +[[image:image-20220517072526-1.png]]
66 +
67 +
68 +
69 +== 1.6  Pin Mapping ==
70 +
71 +
72 +[[image:image-20220523101537-1.png]]
73 +
74 +
75 +
76 +== 1.7  Land Pattern ==
77 +
78 +[[image:image-20220517072821-2.png]]
79 +
80 +
81 +
82 += 2.  LA66 LoRaWAN Shield =
83 +
84 +
85 +== 2.1  Overview ==
86 +
87 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
88 +
89 +
90 +== 2.2  Features ==
91 +
92 +* Arduino Shield base on LA66 LoRaWAN module
93 +* Support LoRaWAN v1.0.4 protocol
94 +* Support peer-to-peer protocol
95 +* TCXO crystal to ensure RF performance on low temperature
96 +* SMA connector
97 +* Available in different frequency LoRaWAN frequency bands.
98 +* World-wide unique OTAA keys.
99 +* AT Command via UART-TTL interface
100 +* Firmware upgradable via UART interface
101 +* Ultra-long RF range
102 +
103 +
104 +== 2.3  Specification ==
105 +
62 62  * CPU: 32-bit 48 MHz
63 63  * Flash: 256KB
64 64  * RAM: 64KB
65 -* Input Power Range: 5v
109 +* Input Power Range: 1.8v ~~ 3.7v
110 +* Power Consumption: < 4uA.
66 66  * Frequency Range: 150 MHz ~~ 960 MHz
67 67  * Maximum Power +22 dBm constant RF output
68 68  * High sensitivity: -148 dBm
... ... @@ -74,277 +74,314 @@
74 74  ** Operating: 10 ~~ 95% (Non-Condensing)
75 75  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
76 76  * LoRa Rx current: <9 mA
122 +* I/O Voltage: 3.3v
77 77  
78 78  
125 +== 2.4  Pin Mapping & LED ==
79 79  
80 -== 1.4  Pin Mapping & LED ==
81 81  
82 -[[image:image-20220813183239-3.png||height="526" width="662"]]
83 83  
129 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
84 84  
85 85  
86 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
87 87  
133 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
88 88  
89 -(((
90 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
91 -)))
92 92  
93 93  
94 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
137 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
95 95  
96 96  
97 -[[image:image-20220723100027-1.png]]
98 98  
141 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
99 99  
100 -Open the serial port tool
101 101  
102 -[[image:image-20220602161617-8.png]]
144 +=== 2.8.1  Items needed for update ===
103 103  
104 -[[image:image-20220602161718-9.png||height="457" width="800"]]
146 +1. LA66 LoRaWAN Shield
147 +1. Arduino
148 +1. USB TO TTL Adapter
105 105  
150 +[[image:image-20220602100052-2.png||height="385" width="600"]]
106 106  
107 107  
108 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
153 +=== 2.8.2  Connection ===
109 109  
110 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
111 111  
156 +[[image:image-20220602101311-3.png||height="276" width="600"]]
112 112  
113 -[[image:image-20220602161935-10.png||height="498" width="800"]]
114 114  
159 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
115 115  
161 +(% style="background-color:yellow" %)**GND  <-> GND
162 +TXD  <->  TXD
163 +RXD  <->  RXD**
116 116  
117 -(% style="color:blue" %)**3. See Uplink Command**
118 118  
119 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
166 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
120 120  
121 -example: AT+SENDB=01,02,8,05820802581ea0a5
168 +Connect USB TTL Adapter to PC after connecting the wires
122 122  
123 -[[image:image-20220602162157-11.png||height="497" width="800"]]
124 124  
171 +[[image:image-20220602102240-4.png||height="304" width="600"]]
125 125  
126 126  
127 -(% style="color:blue" %)**4. Check to see if TTN received the message**
174 +=== 2.8.3  Upgrade steps ===
128 128  
129 -[[image:image-20220817084532-1.jpeg||height="563" width="1076"]]
130 130  
177 +==== 1.  Switch SW1 to put in ISP position ====
131 131  
132 132  
133 -== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
180 +[[image:image-20220602102824-5.png||height="306" width="600"]]
134 134  
135 135  
136 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
137 137  
138 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
184 +==== 2.  Press the RST switch once ====
139 139  
140 -(% style="color:red" %)**Preconditions:**
141 141  
142 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
187 +[[image:image-20220602104701-12.png||height="285" width="600"]]
143 143  
144 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
145 145  
146 146  
191 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
147 147  
148 -(% style="color:blue" %)**Steps for usage:**
149 149  
150 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
194 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
151 151  
152 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
153 153  
154 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
197 +[[image:image-20220602103227-6.png]]
155 155  
156 156  
200 +[[image:image-20220602103357-7.png]]
157 157  
158 -== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
159 159  
160 160  
161 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
204 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
205 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
162 162  
163 163  
164 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
208 +[[image:image-20220602103844-8.png]]
165 165  
166 -[[image:image-20220723100439-2.png]]
167 167  
168 168  
212 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
213 +(% style="color:blue" %)**3. Select the bin file to burn**
169 169  
170 -(% style="color:blue" %)**2. Install Minicom in RPi.**
171 171  
172 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
216 +[[image:image-20220602104144-9.png]]
173 173  
174 - (% style="background-color:yellow" %)**apt update**
175 175  
176 - (% style="background-color:yellow" %)**apt install minicom**
219 +[[image:image-20220602104251-10.png]]
177 177  
178 178  
179 -Use minicom to connect to the RPI's terminal
222 +[[image:image-20220602104402-11.png]]
180 180  
181 -[[image:image-20220602153146-3.png||height="439" width="500"]]
182 182  
183 183  
226 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
227 +(% style="color:blue" %)**4. Click to start the download**
184 184  
185 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
229 +[[image:image-20220602104923-13.png]]
186 186  
187 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
188 188  
189 189  
190 -[[image:image-20220602154928-5.png||height="436" width="500"]]
233 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
234 +(% style="color:blue" %)**5. Check update process**
191 191  
192 192  
237 +[[image:image-20220602104948-14.png]]
193 193  
194 -(% style="color:blue" %)**4. Send Uplink message**
195 195  
196 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
197 197  
198 -example: AT+SENDB=01,02,8,05820802581ea0a5
241 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
242 +(% style="color:blue" %)**The following picture shows that the burning is successful**
199 199  
244 +[[image:image-20220602105251-15.png]]
200 200  
201 -[[image:image-20220602160339-6.png||height="517" width="600"]]
202 202  
203 203  
248 += 3.  LA66 USB LoRaWAN Adapter =
204 204  
205 -Check to see if TTN received the message
206 206  
207 -[[image:image-20220602160627-7.png||height="369" width="800"]]
251 +== 3.1  Overview ==
208 208  
253 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
209 209  
210 210  
211 -== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
256 +== 3.2  Features ==
212 212  
258 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
259 +* Ultra-long RF range
260 +* Support LoRaWAN v1.0.4 protocol
261 +* Support peer-to-peer protocol
262 +* TCXO crystal to ensure RF performance on low temperature
263 +* Spring RF antenna
264 +* Available in different frequency LoRaWAN frequency bands.
265 +* World-wide unique OTAA keys.
266 +* AT Command via UART-TTL interface
267 +* Firmware upgradable via UART interface
213 213  
214 -=== 1.8.1  Hardware and Software Connection ===
215 215  
270 +== 3.3  Specification ==
216 216  
272 +* CPU: 32-bit 48 MHz
273 +* Flash: 256KB
274 +* RAM: 64KB
275 +* Input Power Range: 5v
276 +* Frequency Range: 150 MHz ~~ 960 MHz
277 +* Maximum Power +22 dBm constant RF output
278 +* High sensitivity: -148 dBm
279 +* Temperature:
280 +** Storage: -55 ~~ +125℃
281 +** Operating: -40 ~~ +85℃
282 +* Humidity:
283 +** Storage: 5 ~~ 95% (Non-Condensing)
284 +** Operating: 10 ~~ 95% (Non-Condensing)
285 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
286 +* LoRa Rx current: <9 mA
217 217  
218 -==== (% style="color:blue" %)**Overview：**(%%) ====
219 219  
289 +== 3.4  Pin Mapping & LED ==
220 220  
221 -(((
222 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
223 223  
224 -* Send real-time location information of mobile phone to LoRaWAN network.
225 -* Check LoRaWAN network signal strengh.
226 -* Manually send messages to LoRaWAN network.
227 -)))
228 228  
293 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
229 229  
230 230  
296 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
231 231  
232 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
233 233  
234 -A USB to Type-C adapter is needed to connect to a Mobile phone.
299 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
235 235  
236 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
237 237  
238 -[[image:image-20220813174353-2.png||height="360" width="313"]]
302 +[[image:image-20220602171217-1.png||height="538" width="800"]]
239 239  
240 240  
305 +Open the serial port tool
241 241  
242 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
307 +[[image:image-20220602161617-8.png]]
243 243  
244 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
309 +[[image:image-20220602161718-9.png||height="457" width="800"]]
245 245  
246 -[[image:image-20220813173738-1.png]]
247 247  
248 248  
313 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
249 249  
250 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
315 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
251 251  
252 -Function and page introduction
253 253  
254 -[[image:image-20220723113448-7.png||height="995" width="450"]]
318 +[[image:image-20220602161935-10.png||height="498" width="800"]]
255 255  
256 -**Block Explain:**
257 257  
258 -1.  Display LA66 USB LoRaWAN Module connection status
259 259  
260 -2.  Check and reconnect
322 +(% style="color:blue" %)**3. See Uplink Command**
261 261  
262 -3.  Turn send timestamps on or off
324 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
263 263  
264 -4.  Display LoRaWan connection status
326 +example: AT+SENDB=01,02,8,05820802581ea0a5
265 265  
266 -5.  Check LoRaWan connection status
328 +[[image:image-20220602162157-11.png||height="497" width="800"]]
267 267  
268 -6.  The RSSI value of the node when the ACK is received
269 269  
270 -7.  Node's Signal Strength Icon
271 271  
272 -8.  Configure Location Uplink Interval
332 +(% style="color:blue" %)**4. Check to see if TTN received the message**
273 273  
274 -9.  AT command input box
334 +[[image:image-20220602162331-12.png||height="420" width="800"]]
275 275  
276 -10.  Send Button:  Send input box info to LA66 USB Adapter
277 277  
278 -11.  Output Log from LA66 USB adapter
279 279  
280 -12.  clear log button
338 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
281 281  
282 -13.  exit button
283 283  
341 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
284 284  
285 -LA66 USB LoRaWAN Module not connected
286 286  
287 -[[image:image-20220723110520-5.png||height="677" width="508"]]
344 +(% style="color:red" %)**Preconditions:**
288 288  
346 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
289 289  
348 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
290 290  
291 -Connect LA66 USB LoRaWAN Module
292 292  
293 -[[image:image-20220723110626-6.png||height="681" width="511"]]
294 294  
352 +(% style="color:blue" %)**Steps for usage:**
295 295  
354 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
296 296  
297 -=== 1.8.2 Send data to TTNv3 and plot location info in Node-Red ===
356 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
298 298  
358 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
299 299  
300 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
301 301  
302 -[[image:image-20220723134549-8.png]]
303 303  
362 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
304 304  
305 305  
306 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
365 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
307 307  
308 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
309 309  
310 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
368 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
311 311  
312 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
370 +[[image:image-20220602171233-2.png||height="538" width="800"]]
313 313  
314 314  
315 -Example output in NodeRed is as below:
316 316  
317 -[[image:image-20220723144339-1.png]]
374 +(% style="color:blue" %)**2. Install Minicom in RPi.**
318 318  
376 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
319 319  
378 + (% style="background-color:yellow" %)**apt update**
320 320  
321 -== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
380 + (% style="background-color:yellow" %)**apt install minicom**
322 322  
323 323  
324 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
383 +Use minicom to connect to the RPI's terminal
325 325  
326 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
385 +[[image:image-20220602153146-3.png||height="439" width="500"]]
327 327  
328 -[[image:image-20220723150132-2.png]]
329 329  
330 330  
389 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
331 331  
332 -= 2.  FAQ =
391 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
333 333  
334 334  
335 -== 2.1  How to Compile Source Code for LA66? ==
394 +[[image:image-20220602154928-5.png||height="436" width="500"]]
336 336  
337 337  
338 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
339 339  
398 +(% style="color:blue" %)**4. Send Uplink message**
340 340  
400 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
341 341  
342 -= 3.  Order Info =
402 +example: AT+SENDB=01,02,8,05820802581ea0a5
343 343  
344 344  
345 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
405 +[[image:image-20220602160339-6.png||height="517" width="600"]]
346 346  
347 347  
408 +
409 +Check to see if TTN received the message
410 +
411 +[[image:image-20220602160627-7.png||height="369" width="800"]]
412 +
413 +
414 +
415 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
416 +
417 +
418 +
419 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
420 +
421 +
422 +
423 +
424 += 4.  Order Info =
425 +
426 +
427 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
428 +
429 +
348 348  (% style="color:blue" %)**XXX**(%%): The default frequency band
349 349  
350 350  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -359,7 +359,8 @@
359 359  
360 360  
361 361  
362 -= 4.  Reference =
444 += 5.  Reference =
363 363  
446 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
364 364  
365 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
448 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.9 KB
Content