Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 146.5
edited by Xiaoling
on 2022/08/16 14:51
Change comment: There is no comment for this version
To version 87.8
edited by Xiaoling
on 2022/07/13 10:01
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -1,69 +1,116 @@
1 1  
2 2  
3 -**Table of Contents:**
4 -
5 5  {{toc/}}
6 6  
7 7  
8 8  
7 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
10 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
13 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
15 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 16  
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 -(((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 -)))
27 -
28 -(((
29 29  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 -)))
31 31  
32 -(((
33 33  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 -)))
35 35  
36 -(((
37 37  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 -)))
39 39  
40 40  
41 -
42 42  == 1.2  Features ==
43 43  
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
29 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
34 +* Ultra-long RF range
56 56  
57 57  
58 58  
59 -
60 60  == 1.3  Specification ==
61 61  
40 +* CPU: 32-bit 48 MHz
41 +* Flash: 256KB
42 +* RAM: 64KB
43 +* Input Power Range: 1.8v ~~ 3.7v
44 +* Power Consumption: < 4uA.
45 +* Frequency Range: 150 MHz ~~ 960 MHz
46 +* Maximum Power +22 dBm constant RF output
47 +* High sensitivity: -148 dBm
48 +* Temperature:
49 +** Storage: -55 ~~ +125℃
50 +** Operating: -40 ~~ +85℃
51 +* Humidity:
52 +** Storage: 5 ~~ 95% (Non-Condensing)
53 +** Operating: 10 ~~ 95% (Non-Condensing)
54 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
55 +* LoRa Rx current: <9 mA
56 +* I/O Voltage: 3.3v
62 62  
58 +
59 +
60 +== 1.4  AT Command ==
61 +
62 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
63 +
64 +
65 +== 1.5  Dimension ==
66 +
67 +[[image:image-20220517072526-1.png]]
68 +
69 +
70 +
71 +== 1.6  Pin Mapping ==
72 +
73 +
74 +[[image:image-20220523101537-1.png]]
75 +
76 +
77 +
78 +== 1.7  Land Pattern ==
79 +
80 +[[image:image-20220517072821-2.png]]
81 +
82 +
83 +
84 += 2.  LA66 LoRaWAN Shield =
85 +
86 +
87 +== 2.1  Overview ==
88 +
89 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
90 +
91 +
92 +== 2.2  Features ==
93 +
94 +* Arduino Shield base on LA66 LoRaWAN module
95 +* Support LoRaWAN v1.0.4 protocol
96 +* Support peer-to-peer protocol
97 +* TCXO crystal to ensure RF performance on low temperature
98 +* SMA connector
99 +* Available in different frequency LoRaWAN frequency bands.
100 +* World-wide unique OTAA keys.
101 +* AT Command via UART-TTL interface
102 +* Firmware upgradable via UART interface
103 +* Ultra-long RF range
104 +
105 +
106 +
107 +== 2.3  Specification ==
108 +
63 63  * CPU: 32-bit 48 MHz
64 64  * Flash: 256KB
65 65  * RAM: 64KB
66 -* Input Power Range: 5v
112 +* Input Power Range: 1.8v ~~ 3.7v
113 +* Power Consumption: < 4uA.
67 67  * Frequency Range: 150 MHz ~~ 960 MHz
68 68  * Maximum Power +22 dBm constant RF output
69 69  * High sensitivity: -148 dBm
... ... @@ -75,278 +75,307 @@
75 75  ** Operating: 10 ~~ 95% (Non-Condensing)
76 76  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
77 77  * LoRa Rx current: <9 mA
125 +* I/O Voltage: 3.3v
78 78  
79 79  
80 80  
129 +== 2.4  Pin Mapping & LED ==
81 81  
82 -== 1.4  Pin Mapping & LED ==
83 83  
84 -[[image:image-20220813183239-3.png||height="526" width="662"]]
85 85  
133 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
86 86  
87 87  
88 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
89 89  
137 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
90 90  
91 -(((
92 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
93 -)))
94 94  
95 95  
96 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
141 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
97 97  
98 98  
99 -[[image:image-20220723100027-1.png]]
100 100  
145 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
101 101  
102 -Open the serial port tool
103 103  
104 -[[image:image-20220602161617-8.png]]
148 +=== 2.8.1  Items needed for update ===
105 105  
106 -[[image:image-20220602161718-9.png||height="457" width="800"]]
150 +1. LA66 LoRaWAN Shield
151 +1. Arduino
152 +1. USB TO TTL Adapter
107 107  
154 +[[image:image-20220602100052-2.png||height="385" width="600"]]
108 108  
109 109  
110 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
157 +=== 2.8.2  Connection ===
111 111  
112 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
113 113  
160 +[[image:image-20220602101311-3.png||height="276" width="600"]]
114 114  
115 -[[image:image-20220602161935-10.png||height="498" width="800"]]
116 116  
163 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
117 117  
165 +(% style="background-color:yellow" %)**GND  <-> GND
166 +TXD  <->  TXD
167 +RXD  <->  RXD**
118 118  
119 -(% style="color:blue" %)**3. See Uplink Command**
120 120  
121 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
170 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
122 122  
123 -example: AT+SENDB=01,02,8,05820802581ea0a5
172 +Connect USB TTL Adapter to PC after connecting the wires
124 124  
125 -[[image:image-20220602162157-11.png||height="497" width="800"]]
126 126  
175 +[[image:image-20220602102240-4.png||height="304" width="600"]]
127 127  
128 128  
129 -(% style="color:blue" %)**4. Check to see if TTN received the message**
178 +=== 2.8.3  Upgrade steps ===
130 130  
131 -[[image:image-20220602162331-12.png||height="420" width="800"]]
132 132  
181 +==== 1.  Switch SW1 to put in ISP position ====
133 133  
134 134  
135 -== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
184 +[[image:image-20220602102824-5.png||height="306" width="600"]]
136 136  
137 137  
138 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
187 +==== 2.  Press the RST switch once ====
139 139  
140 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
189 +[[image:image-20220602104701-12.png||height="285" width="600"]]
141 141  
142 -(% style="color:red" %)**Preconditions:**
143 143  
144 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
192 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
145 145  
146 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
147 147  
195 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
148 148  
149 149  
150 -(% style="color:blue" %)**Steps for usage:**
198 +[[image:image-20220602103227-6.png]]
151 151  
152 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
153 153  
154 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
201 +[[image:image-20220602103357-7.png]]
155 155  
156 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
157 157  
158 158  
205 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
206 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
159 159  
160 -== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
161 161  
209 +[[image:image-20220602103844-8.png]]
162 162  
163 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
164 164  
165 165  
166 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
213 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
214 +(% style="color:blue" %)**3. Select the bin file to burn**
167 167  
168 -[[image:image-20220723100439-2.png]]
169 169  
217 +[[image:image-20220602104144-9.png]]
170 170  
171 171  
172 -(% style="color:blue" %)**2. Install Minicom in RPi.**
220 +[[image:image-20220602104251-10.png]]
173 173  
174 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
175 175  
176 - (% style="background-color:yellow" %)**apt update**
223 +[[image:image-20220602104402-11.png]]
177 177  
178 - (% style="background-color:yellow" %)**apt install minicom**
179 179  
180 180  
181 -Use minicom to connect to the RPI's terminal
227 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
228 +(% style="color:blue" %)**4. Click to start the download**
182 182  
183 -[[image:image-20220602153146-3.png||height="439" width="500"]]
230 +[[image:image-20220602104923-13.png]]
184 184  
185 185  
233 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
234 +(% style="color:blue" %)**5. Check update process**
186 186  
187 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
188 188  
189 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
237 +[[image:image-20220602104948-14.png]]
190 190  
191 191  
192 -[[image:image-20220602154928-5.png||height="436" width="500"]]
193 193  
241 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
242 +(% style="color:blue" %)**The following picture shows that the burning is successful**
194 194  
244 +[[image:image-20220602105251-15.png]]
195 195  
196 -(% style="color:blue" %)**4. Send Uplink message**
197 197  
198 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
199 199  
200 -example: AT+SENDB=01,02,8,05820802581ea0a5
248 += 3.  LA66 USB LoRaWAN Adapter =
201 201  
202 202  
203 -[[image:image-20220602160339-6.png||height="517" width="600"]]
251 +== 3.1  Overview ==
204 204  
253 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
205 205  
206 206  
207 -Check to see if TTN received the message
256 +== 3.2  Features ==
208 208  
209 -[[image:image-20220602160627-7.png||height="369" width="800"]]
258 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
259 +* Ultra-long RF range
260 +* Support LoRaWAN v1.0.4 protocol
261 +* Support peer-to-peer protocol
262 +* TCXO crystal to ensure RF performance on low temperature
263 +* Spring RF antenna
264 +* Available in different frequency LoRaWAN frequency bands.
265 +* World-wide unique OTAA keys.
266 +* AT Command via UART-TTL interface
267 +* Firmware upgradable via UART interface
210 210  
269 +== 3.3  Specification ==
211 211  
271 +* CPU: 32-bit 48 MHz
272 +* Flash: 256KB
273 +* RAM: 64KB
274 +* Input Power Range: 5v
275 +* Frequency Range: 150 MHz ~~ 960 MHz
276 +* Maximum Power +22 dBm constant RF output
277 +* High sensitivity: -148 dBm
278 +* Temperature:
279 +** Storage: -55 ~~ +125℃
280 +** Operating: -40 ~~ +85℃
281 +* Humidity:
282 +** Storage: 5 ~~ 95% (Non-Condensing)
283 +** Operating: 10 ~~ 95% (Non-Condensing)
284 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
285 +* LoRa Rx current: <9 mA
212 212  
213 -== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
287 +== 3.4  Pin Mapping & LED ==
214 214  
215 215  
216 -=== 1.8.1  Hardware and Software Connection ===
217 217  
291 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
218 218  
219 219  
220 -==== (% style="color:blue" %)**Overview：**(%%) ====
294 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
221 221  
222 222  
223 -(((
224 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
297 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
225 225  
226 -* Send real-time location information of mobile phone to LoRaWAN network.
227 -* Check LoRaWAN network signal strengh.
228 -* Manually send messages to LoRaWAN network.
229 -)))
230 230  
300 +[[image:image-20220602171217-1.png||height="538" width="800"]]
231 231  
232 232  
303 +Open the serial port tool
233 233  
234 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
305 +[[image:image-20220602161617-8.png]]
235 235  
236 -A USB to Type-C adapter is needed to connect to a Mobile phone.
307 +[[image:image-20220602161718-9.png||height="457" width="800"]]
237 237  
238 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
239 239  
240 -[[image:image-20220813174353-2.png||height="360" width="313"]]
241 241  
311 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
242 242  
313 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
243 243  
244 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
245 245  
246 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
316 +[[image:image-20220602161935-10.png||height="498" width="800"]]
247 247  
248 -[[image:image-20220813173738-1.png]]
249 249  
250 250  
320 +(% style="color:blue" %)**3. See Uplink Command**
251 251  
252 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
322 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
253 253  
254 -Function and page introduction
324 +example: AT+SENDB=01,02,8,05820802581ea0a5
255 255  
256 -[[image:image-20220723113448-7.png||height="995" width="450"]]
326 +[[image:image-20220602162157-11.png||height="497" width="800"]]
257 257  
258 -**Block Explain:**
259 259  
260 -1.  Display LA66 USB LoRaWAN Module connection status
261 261  
262 -2.  Check and reconnect
330 +(% style="color:blue" %)**4. Check to see if TTN received the message**
263 263  
264 -3.  Turn send timestamps on or off
332 +[[image:image-20220602162331-12.png||height="420" width="800"]]
265 265  
266 -4.  Display LoRaWan connection status
267 267  
268 -5.  Check LoRaWan connection status
269 269  
270 -6.  The RSSI value of the node when the ACK is received
336 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
271 271  
272 -7.  Node's Signal Strength Icon
273 273  
274 -8.  Configure Location Uplink Interval
339 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
275 275  
276 -9.  AT command input box
277 277  
278 -10.  Send Button:  Send input box info to LA66 USB Adapter
342 +(% style="color:red" %)**Preconditions:**
279 279  
280 -11.  Output Log from LA66 USB adapter
344 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
281 281  
282 -12.  clear log button
346 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
283 283  
284 -13.  exit button
285 285  
286 286  
287 -LA66 USB LoRaWAN Module not connected
350 +(% style="color:blue" %)**Steps for usage:**
288 288  
289 -[[image:image-20220723110520-5.png||height="677" width="508"]]
352 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
290 290  
354 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
291 291  
356 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
292 292  
293 -Connect LA66 USB LoRaWAN Module
294 294  
295 -[[image:image-20220723110626-6.png||height="681" width="511"]]
296 296  
360 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
297 297  
298 298  
299 -=== 1.8.2 Send data to TTNv3 and plot location info in Node-Red ===
363 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
300 300  
301 301  
302 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
366 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
303 303  
304 -[[image:image-20220723134549-8.png]]
368 +[[image:image-20220602171233-2.png||height="538" width="800"]]
305 305  
306 306  
307 307  
308 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
372 +(% style="color:blue" %)**2. Install Minicom in RPi.**
309 309  
310 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
374 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
311 311  
312 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
376 + (% style="background-color:yellow" %)**apt update**
313 313  
314 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
378 + (% style="background-color:yellow" %)**apt install minicom**
315 315  
316 316  
317 -Example output in NodeRed is as below:
381 +Use minicom to connect to the RPI's terminal
318 318  
319 -[[image:image-20220723144339-1.png]]
383 +[[image:image-20220602153146-3.png||height="439" width="500"]]
320 320  
321 321  
322 322  
323 -== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
387 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
388 +(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
324 324  
390 +[[image:image-20220602154928-5.png||height="436" width="500"]]
325 325  
326 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
327 327  
328 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
329 329  
330 -[[image:image-20220723150132-2.png]]
394 +(% style="color:blue" %)**4. Send Uplink message**
331 331  
396 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
332 332  
398 +example: AT+SENDB=01,02,8,05820802581ea0a5
333 333  
334 -= 2.  FAQ =
335 335  
401 +[[image:image-20220602160339-6.png||height="517" width="600"]]
336 336  
337 -== 2.1  How to Compile Source Code for LA66? ==
338 338  
339 339  
340 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
405 +Check to see if TTN received the message
341 341  
407 +[[image:image-20220602160627-7.png||height="369" width="800"]]
342 342  
343 343  
344 -= 3.  Order Info =
345 345  
411 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
346 346  
347 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
348 348  
349 349  
415 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
416 +
417 +
418 +
419 +
420 += 4.  Order Info =
421 +
422 +
423 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
424 +
425 +
350 350  (% style="color:blue" %)**XXX**(%%): The default frequency band
351 351  
352 352  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -362,7 +362,8 @@
362 362  
363 363  
364 364  
365 -= 4.  Reference =
441 += 5.  Reference =
366 366  
443 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
367 367  
368 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
445 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content