Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 146.5
edited by Xiaoling
on 2022/08/16 14:51
Change comment: There is no comment for this version
To version 87.6
edited by Xiaoling
on 2022/07/13 09:59
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 USB LoRaWAN Adapter User Manual
1 +LA66 LoRaWAN Module
Content
... ... @@ -1,69 +1,114 @@
1 1  
2 2  
3 -**Table of Contents:**
3 +{{box cssClass="floatinginfobox" title="**Contents**"}}
4 +{{toc/}}
5 +{{/box}}
4 4  
5 5  {{toc/}}
6 6  
7 7  
8 8  
11 += 1.  LA66 LoRaWAN Module =
9 9  
10 10  
11 -= 1.  LA66 USB LoRaWAN Adapter =
14 +== 1.1  What is LA66 LoRaWAN Module ==
12 12  
13 13  
14 -== 1.1  Overview ==
17 +(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
15 15  
19 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
16 16  
17 -[[image:image-20220715001142-3.png||height="145" width="220"]]
18 -
19 -
20 -(((
21 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
22 -)))
23 -
24 -(((
25 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
26 -)))
27 -
28 -(((
29 29  Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
30 -)))
31 31  
32 -(((
33 33  Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
34 -)))
35 35  
36 -(((
37 37  LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
38 -)))
39 39  
40 40  
41 -
42 42  == 1.2  Features ==
43 43  
44 -
45 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 -* Ultra-long RF range
47 47  * Support LoRaWAN v1.0.4 protocol
48 48  * Support peer-to-peer protocol
49 49  * TCXO crystal to ensure RF performance on low temperature
50 -* Spring RF antenna
33 +* SMD Antenna pad and i-pex antenna connector
51 51  * Available in different frequency LoRaWAN frequency bands.
52 52  * World-wide unique OTAA keys.
53 53  * AT Command via UART-TTL interface
54 54  * Firmware upgradable via UART interface
55 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
38 +* Ultra-long RF range
56 56  
40 +== 1.3  Specification ==
57 57  
42 +* CPU: 32-bit 48 MHz
43 +* Flash: 256KB
44 +* RAM: 64KB
45 +* Input Power Range: 1.8v ~~ 3.7v
46 +* Power Consumption: < 4uA.
47 +* Frequency Range: 150 MHz ~~ 960 MHz
48 +* Maximum Power +22 dBm constant RF output
49 +* High sensitivity: -148 dBm
50 +* Temperature:
51 +** Storage: -55 ~~ +125℃
52 +** Operating: -40 ~~ +85℃
53 +* Humidity:
54 +** Storage: 5 ~~ 95% (Non-Condensing)
55 +** Operating: 10 ~~ 95% (Non-Condensing)
56 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
57 +* LoRa Rx current: <9 mA
58 +* I/O Voltage: 3.3v
58 58  
60 +== 1.4  AT Command ==
59 59  
60 -== 1.3  Specification ==
62 +AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
61 61  
62 62  
65 +== 1.5  Dimension ==
66 +
67 +[[image:image-20220517072526-1.png]]
68 +
69 +
70 +
71 +== 1.6  Pin Mapping ==
72 +
73 +
74 +[[image:image-20220523101537-1.png]]
75 +
76 +
77 +
78 +== 1.7  Land Pattern ==
79 +
80 +[[image:image-20220517072821-2.png]]
81 +
82 +
83 +
84 += 2.  LA66 LoRaWAN Shield =
85 +
86 +
87 +== 2.1  Overview ==
88 +
89 +LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
90 +
91 +
92 +== 2.2  Features ==
93 +
94 +* Arduino Shield base on LA66 LoRaWAN module
95 +* Support LoRaWAN v1.0.4 protocol
96 +* Support peer-to-peer protocol
97 +* TCXO crystal to ensure RF performance on low temperature
98 +* SMA connector
99 +* Available in different frequency LoRaWAN frequency bands.
100 +* World-wide unique OTAA keys.
101 +* AT Command via UART-TTL interface
102 +* Firmware upgradable via UART interface
103 +* Ultra-long RF range
104 +
105 +== 2.3  Specification ==
106 +
63 63  * CPU: 32-bit 48 MHz
64 64  * Flash: 256KB
65 65  * RAM: 64KB
66 -* Input Power Range: 5v
110 +* Input Power Range: 1.8v ~~ 3.7v
111 +* Power Consumption: < 4uA.
67 67  * Frequency Range: 150 MHz ~~ 960 MHz
68 68  * Maximum Power +22 dBm constant RF output
69 69  * High sensitivity: -148 dBm
... ... @@ -75,278 +75,306 @@
75 75  ** Operating: 10 ~~ 95% (Non-Condensing)
76 76  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
77 77  * LoRa Rx current: <9 mA
123 +* I/O Voltage: 3.3v
78 78  
125 +== 2.4  Pin Mapping & LED ==
79 79  
80 80  
81 81  
82 -== 1.4  Pin Mapping & LED ==
129 +== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
83 83  
84 -[[image:image-20220813183239-3.png||height="526" width="662"]]
85 85  
86 86  
133 +== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
87 87  
88 -== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
89 89  
90 90  
91 -(((
92 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
93 -)))
137 +== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
94 94  
95 95  
96 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
97 97  
141 +== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
98 98  
99 -[[image:image-20220723100027-1.png]]
100 100  
144 +=== 2.8.1  Items needed for update ===
101 101  
102 -Open the serial port tool
146 +1. LA66 LoRaWAN Shield
147 +1. Arduino
148 +1. USB TO TTL Adapter
103 103  
104 -[[image:image-20220602161617-8.png]]
150 +[[image:image-20220602100052-2.png||height="385" width="600"]]
105 105  
106 -[[image:image-20220602161718-9.png||height="457" width="800"]]
107 107  
153 +=== 2.8.2  Connection ===
108 108  
109 109  
110 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
156 +[[image:image-20220602101311-3.png||height="276" width="600"]]
111 111  
112 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
113 113  
159 +(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
114 114  
115 -[[image:image-20220602161935-10.png||height="498" width="800"]]
116 116  
162 +(% style="background-color:yellow" %)**GND  <-> GND
163 +TXD  <->  TXD
164 +RXD  <->  RXD**
117 117  
118 118  
119 -(% style="color:blue" %)**3. See Uplink Command**
167 +Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
120 120  
121 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
169 +Connect USB TTL Adapter to PC after connecting the wires
122 122  
123 -example: AT+SENDB=01,02,8,05820802581ea0a5
124 124  
125 -[[image:image-20220602162157-11.png||height="497" width="800"]]
172 +[[image:image-20220602102240-4.png||height="304" width="600"]]
126 126  
127 127  
175 +=== 2.8.3  Upgrade steps ===
128 128  
129 -(% style="color:blue" %)**4. Check to see if TTN received the message**
130 130  
131 -[[image:image-20220602162331-12.png||height="420" width="800"]]
178 +==== 1.  Switch SW1 to put in ISP position ====
132 132  
133 133  
181 +[[image:image-20220602102824-5.png||height="306" width="600"]]
134 134  
135 -== 1.6  Example: Send PC's CPU/RAM usage to TTN via python ==
136 136  
184 +==== 2.  Press the RST switch once ====
137 137  
138 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
186 +[[image:image-20220602104701-12.png||height="285" width="600"]]
139 139  
140 -(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
141 141  
142 -(% style="color:red" %)**Preconditions:**
189 +==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
143 143  
144 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
145 145  
146 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
192 +(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
147 147  
148 148  
195 +[[image:image-20220602103227-6.png]]
149 149  
150 -(% style="color:blue" %)**Steps for usage:**
151 151  
152 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
198 +[[image:image-20220602103357-7.png]]
153 153  
154 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
155 155  
156 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
157 157  
202 +(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
203 +(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
158 158  
159 159  
160 -== 1.7  Example: Send & Get Messages via LoRaWAN in RPi ==
206 +[[image:image-20220602103844-8.png]]
161 161  
162 162  
163 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
164 164  
210 +(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
211 +(% style="color:blue" %)**3. Select the bin file to burn**
165 165  
166 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
167 167  
168 -[[image:image-20220723100439-2.png]]
214 +[[image:image-20220602104144-9.png]]
169 169  
170 170  
217 +[[image:image-20220602104251-10.png]]
171 171  
172 -(% style="color:blue" %)**2. Install Minicom in RPi.**
173 173  
174 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
220 +[[image:image-20220602104402-11.png]]
175 175  
176 - (% style="background-color:yellow" %)**apt update**
177 177  
178 - (% style="background-color:yellow" %)**apt install minicom**
179 179  
224 +(% class="wikigeneratedid" id="HClicktostartthedownload" %)
225 +(% style="color:blue" %)**4. Click to start the download**
180 180  
181 -Use minicom to connect to the RPI's terminal
227 +[[image:image-20220602104923-13.png]]
182 182  
183 -[[image:image-20220602153146-3.png||height="439" width="500"]]
184 184  
230 +(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
231 +(% style="color:blue" %)**5. Check update process**
185 185  
186 186  
187 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
234 +[[image:image-20220602104948-14.png]]
188 188  
189 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
190 190  
191 191  
192 -[[image:image-20220602154928-5.png||height="436" width="500"]]
238 +(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
239 +(% style="color:blue" %)**The following picture shows that the burning is successful**
193 193  
241 +[[image:image-20220602105251-15.png]]
194 194  
195 195  
196 -(% style="color:blue" %)**4. Send Uplink message**
197 197  
198 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
245 += 3.  LA66 USB LoRaWAN Adapter =
199 199  
200 -example: AT+SENDB=01,02,8,05820802581ea0a5
201 201  
248 +== 3.1  Overview ==
202 202  
203 -[[image:image-20220602160339-6.png||height="517" width="600"]]
250 +LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
204 204  
205 205  
253 +== 3.2  Features ==
206 206  
207 -Check to see if TTN received the message
255 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
256 +* Ultra-long RF range
257 +* Support LoRaWAN v1.0.4 protocol
258 +* Support peer-to-peer protocol
259 +* TCXO crystal to ensure RF performance on low temperature
260 +* Spring RF antenna
261 +* Available in different frequency LoRaWAN frequency bands.
262 +* World-wide unique OTAA keys.
263 +* AT Command via UART-TTL interface
264 +* Firmware upgradable via UART interface
208 208  
209 -[[image:image-20220602160627-7.png||height="369" width="800"]]
266 +== 3.3  Specification ==
210 210  
268 +* CPU: 32-bit 48 MHz
269 +* Flash: 256KB
270 +* RAM: 64KB
271 +* Input Power Range: 5v
272 +* Frequency Range: 150 MHz ~~ 960 MHz
273 +* Maximum Power +22 dBm constant RF output
274 +* High sensitivity: -148 dBm
275 +* Temperature:
276 +** Storage: -55 ~~ +125℃
277 +** Operating: -40 ~~ +85℃
278 +* Humidity:
279 +** Storage: 5 ~~ 95% (Non-Condensing)
280 +** Operating: 10 ~~ 95% (Non-Condensing)
281 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
282 +* LoRa Rx current: <9 mA
211 211  
284 +== 3.4  Pin Mapping & LED ==
212 212  
213 -== 1.8  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
214 214  
215 215  
216 -=== 1.8.1  Hardware and Software Connection ===
288 +== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
217 217  
218 218  
291 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
219 219  
220 -==== (% style="color:blue" %)**Overview：**(%%) ====
221 221  
294 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
222 222  
223 -(((
224 -DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
225 225  
226 -* Send real-time location information of mobile phone to LoRaWAN network.
227 -* Check LoRaWAN network signal strengh.
228 -* Manually send messages to LoRaWAN network.
229 -)))
297 +[[image:image-20220602171217-1.png||height="538" width="800"]]
230 230  
231 231  
300 +Open the serial port tool
232 232  
302 +[[image:image-20220602161617-8.png]]
233 233  
234 -==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
304 +[[image:image-20220602161718-9.png||height="457" width="800"]]
235 235  
236 -A USB to Type-C adapter is needed to connect to a Mobile phone.
237 237  
238 -Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
239 239  
240 -[[image:image-20220813174353-2.png||height="360" width="313"]]
308 +(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
241 241  
310 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
242 242  
243 243  
244 -==== (% style="color:blue" %)**Download and Install App:**(%%) ====
313 +[[image:image-20220602161935-10.png||height="498" width="800"]]
245 245  
246 -[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
247 247  
248 -[[image:image-20220813173738-1.png]]
249 249  
317 +(% style="color:blue" %)**3. See Uplink Command**
250 250  
319 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
251 251  
252 -==== (% style="color:blue" %)**Use of APP:**(%%) ====
321 +example: AT+SENDB=01,02,8,05820802581ea0a5
253 253  
254 -Function and page introduction
323 +[[image:image-20220602162157-11.png||height="497" width="800"]]
255 255  
256 -[[image:image-20220723113448-7.png||height="995" width="450"]]
257 257  
258 -**Block Explain:**
259 259  
260 -1.  Display LA66 USB LoRaWAN Module connection status
327 +(% style="color:blue" %)**4. Check to see if TTN received the message**
261 261  
262 -2.  Check and reconnect
329 +[[image:image-20220602162331-12.png||height="420" width="800"]]
263 263  
264 -3.  Turn send timestamps on or off
265 265  
266 -4.  Display LoRaWan connection status
267 267  
268 -5.  Check LoRaWan connection status
333 +== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
269 269  
270 -6.  The RSSI value of the node when the ACK is received
271 271  
272 -7.  Node's Signal Strength Icon
336 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
273 273  
274 -8.  Configure Location Uplink Interval
275 275  
276 -9.  AT command input box
339 +(% style="color:red" %)**Preconditions:**
277 277  
278 -10.  Send Button:  Send input box info to LA66 USB Adapter
341 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
279 279  
280 -11.  Output Log from LA66 USB adapter
343 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
281 281  
282 -12.  clear log button
283 283  
284 -13.  exit button
285 285  
347 +(% style="color:blue" %)**Steps for usage:**
286 286  
287 -LA66 USB LoRaWAN Module not connected
349 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
288 288  
289 -[[image:image-20220723110520-5.png||height="677" width="508"]]
351 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
290 290  
353 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
291 291  
292 292  
293 -Connect LA66 USB LoRaWAN Module
294 294  
295 -[[image:image-20220723110626-6.png||height="681" width="511"]]
357 +== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
296 296  
297 297  
360 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
298 298  
299 -=== 1.8.2 Send data to TTNv3 and plot location info in Node-Red ===
300 300  
363 +(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
301 301  
302 -(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
365 +[[image:image-20220602171233-2.png||height="538" width="800"]]
303 303  
304 -[[image:image-20220723134549-8.png]]
305 305  
306 306  
369 +(% style="color:blue" %)**2. Install Minicom in RPi.**
307 307  
308 -(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
371 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
309 309  
310 -Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
373 + (% style="background-color:yellow" %)**apt update**
311 311  
312 -For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
375 + (% style="background-color:yellow" %)**apt install minicom**
313 313  
314 -After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
315 315  
378 +Use minicom to connect to the RPI's terminal
316 316  
317 -Example output in NodeRed is as below:
380 +[[image:image-20220602153146-3.png||height="439" width="500"]]
318 318  
319 -[[image:image-20220723144339-1.png]]
320 320  
321 321  
384 +(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**(%%)
385 +(% style="color:blue" %)The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network
322 322  
323 -== 1.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
387 +[[image:image-20220602154928-5.png||height="436" width="500"]]
324 324  
325 325  
326 -The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method
327 327  
328 -Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect)
391 +(% style="color:blue" %)**4. Send Uplink message**
329 329  
330 -[[image:image-20220723150132-2.png]]
393 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
331 331  
395 +example: AT+SENDB=01,02,8,05820802581ea0a5
332 332  
333 333  
334 -= 2.  FAQ =
398 +[[image:image-20220602160339-6.png||height="517" width="600"]]
335 335  
336 336  
337 -== 2.1  How to Compile Source Code for LA66? ==
338 338  
402 +Check to see if TTN received the message
339 339  
340 -Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
404 +[[image:image-20220602160627-7.png||height="369" width="800"]]
341 341  
342 342  
343 343  
344 -= 3.  Order Info =
408 +== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
345 345  
346 346  
347 -**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
348 348  
412 +== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
349 349  
414 +
415 +
416 +
417 += 4.  Order Info =
418 +
419 +
420 +**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
421 +
422 +
350 350  (% style="color:blue" %)**XXX**(%%): The default frequency band
351 351  
352 352  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -362,7 +362,8 @@
362 362  
363 363  
364 364  
365 -= 4.  Reference =
438 += 5.  Reference =
366 366  
440 +* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
367 367  
368 -* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
442 +
image-20220715000242-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.4 KB
Content
image-20220715000826-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -913.4 KB
Content